From: Luca Coelho <luca@coelho.fi>
To: kvalo@codeaurora.org
Cc: luca@coelho.fi, linux-wireless@vger.kernel.org
Subject: [PATCH 07/12] iwlwifi: correct HE capabilities
Date: Thu, 17 Jun 2021 10:08:47 +0300 [thread overview]
Message-ID: <iwlwifi.20210617100544.e8d0b02ec86b.Ia6ef8cc0480d38af25e6ac45fad9fb15bdfcbc2c@changeid> (raw)
In-Reply-To: <20210617070852.496985-1-luca@coelho.fi>
From: Johannes Berg <johannes.berg@intel.com>
The (default) HE capabilities for our devices weren't handled
correctly, adjust them to match the correct capabilities of
the devices.
Since the device regulatory will not allow 160 MHz on 5 GHz,
don't advertise this capability by default; do it only if an
NVM file is being loaded that might change the regulatory
parameters.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
---
.../wireless/intel/iwlwifi/iwl-nvm-parse.c | 114 ++++++++++--------
1 file changed, 66 insertions(+), 48 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
index 81a101d6a190..46f92b58f009 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
/*
- * Copyright (C) 2005-2014, 2018-2020 Intel Corporation
+ * Copyright (C) 2005-2014, 2018-2021 Intel Corporation
* Copyright (C) 2013-2015 Intel Mobile Communications GmbH
* Copyright (C) 2016-2017 Intel Deutschland GmbH
*/
@@ -550,8 +550,7 @@ static const struct ieee80211_sband_iftype_data iwl_he_capa[] = {
.mac_cap_info[2] =
IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP,
.mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_2,
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL,
.mac_cap_info[4] =
IEEE80211_HE_MAC_CAP4_AMSDU_IN_AMPDU |
IEEE80211_HE_MAC_CAP4_MULTI_TID_AGG_TX_QOS_B39,
@@ -580,25 +579,20 @@ static const struct ieee80211_sband_iftype_data iwl_he_capa[] = {
IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE |
IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_8 |
IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_8,
- .phy_cap_info[5] =
- IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_2 |
- IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_2,
.phy_cap_info[6] =
IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMING_FB |
IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMING_PARTIAL_BW_FB |
IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT,
.phy_cap_info[7] =
IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_SUPP |
- IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI |
- IEEE80211_HE_PHY_CAP7_MAX_NC_1,
+ IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI,
.phy_cap_info[8] =
IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI |
IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G |
IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU |
IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU |
- IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_2x996,
+ IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_242,
.phy_cap_info[9] =
- IEEE80211_HE_PHY_CAP9_NON_TRIGGERED_CQI_FEEDBACK |
IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB |
IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB |
IEEE80211_HE_PHY_CAP9_NOMIMAL_PKT_PADDING_RESERVED,
@@ -633,19 +627,11 @@ static const struct ieee80211_sband_iftype_data iwl_he_capa[] = {
.mac_cap_info[1] =
IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
- .mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR,
.mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_2,
- .mac_cap_info[4] =
- IEEE80211_HE_MAC_CAP4_AMSDU_IN_AMPDU,
- .mac_cap_info[5] =
- IEEE80211_HE_MAC_CAP5_UL_2x996_TONE_RU,
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL,
.phy_cap_info[0] =
IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G,
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G,
.phy_cap_info[1] =
IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD,
.phy_cap_info[2] =
@@ -655,27 +641,14 @@ static const struct ieee80211_sband_iftype_data iwl_he_capa[] = {
IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_1 |
IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_NO_DCM |
IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_1,
- .phy_cap_info[4] =
- IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE |
- IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_8 |
- IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_8,
- .phy_cap_info[5] =
- IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_2 |
- IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_2,
.phy_cap_info[6] =
IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT,
.phy_cap_info[7] =
- IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI |
- IEEE80211_HE_PHY_CAP7_MAX_NC_1,
+ IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI,
.phy_cap_info[8] =
IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI |
- IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G |
- IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU |
- IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU |
- IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_2x996,
+ IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_242,
.phy_cap_info[9] =
- IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB |
- IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB |
IEEE80211_HE_PHY_CAP9_NOMIMAL_PKT_PADDING_RESERVED,
},
/*
@@ -746,12 +719,66 @@ static void iwl_init_he_6ghz_capa(struct iwl_trans *trans,
iftype_data[i].he_6ghz_capa.capa = cpu_to_le16(he_6ghz_capa);
}
+static void
+iwl_nvm_fixup_sband_iftd(struct iwl_trans *trans,
+ struct ieee80211_supported_band *sband,
+ struct ieee80211_sband_iftype_data *iftype_data,
+ u8 tx_chains, u8 rx_chains)
+{
+ bool is_ap = iftype_data->types_mask & BIT(NL80211_IFTYPE_AP);
+
+ /* Advertise an A-MPDU exponent extension based on
+ * operating band
+ */
+ if (sband->band != NL80211_BAND_2GHZ)
+ iftype_data->he_cap.he_cap_elem.mac_cap_info[3] |=
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_1;
+ else
+ iftype_data->he_cap.he_cap_elem.mac_cap_info[3] |=
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_3;
+
+ if (is_ap && iwlwifi_mod_params.nvm_file)
+ iftype_data->he_cap.he_cap_elem.phy_cap_info[0] |=
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
+
+ if ((tx_chains & rx_chains) == ANT_AB) {
+ iftype_data->he_cap.he_cap_elem.phy_cap_info[5] |=
+ IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_2 |
+ IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_2;
+ if (!is_ap)
+ iftype_data->he_cap.he_cap_elem.phy_cap_info[7] |=
+ IEEE80211_HE_PHY_CAP7_MAX_NC_2;
+ } else if (!is_ap) {
+ /* If not 2x2, we need to indicate 1x1 in the
+ * Midamble RX Max NSTS - but not for AP mode
+ */
+ iftype_data->he_cap.he_cap_elem.phy_cap_info[1] &=
+ ~IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS;
+ iftype_data->he_cap.he_cap_elem.phy_cap_info[2] &=
+ ~IEEE80211_HE_PHY_CAP2_MIDAMBLE_RX_TX_MAX_NSTS;
+ iftype_data->he_cap.he_cap_elem.phy_cap_info[7] |=
+ IEEE80211_HE_PHY_CAP7_MAX_NC_1;
+ }
+
+ switch (CSR_HW_RFID_TYPE(trans->hw_rf_id)) {
+ case IWL_CFG_RF_TYPE_GF:
+ case IWL_CFG_RF_TYPE_MR:
+ iftype_data->he_cap.he_cap_elem.phy_cap_info[9] |=
+ IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU;
+ if (!is_ap)
+ iftype_data->he_cap.he_cap_elem.phy_cap_info[9] |=
+ IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU;
+ break;
+ }
+}
+
static void iwl_init_he_hw_capab(struct iwl_trans *trans,
struct iwl_nvm_data *data,
struct ieee80211_supported_band *sband,
u8 tx_chains, u8 rx_chains)
{
struct ieee80211_sband_iftype_data *iftype_data;
+ int i;
/* should only initialize once */
if (WARN_ON(sband->iftype_data))
@@ -778,19 +805,10 @@ static void iwl_init_he_hw_capab(struct iwl_trans *trans,
sband->iftype_data = iftype_data;
sband->n_iftype_data = ARRAY_SIZE(iwl_he_capa);
- /* If not 2x2, we need to indicate 1x1 in the Midamble RX Max NSTS */
- if ((tx_chains & rx_chains) != ANT_AB) {
- int i;
-
- for (i = 0; i < sband->n_iftype_data; i++) {
- iftype_data[i].he_cap.he_cap_elem.phy_cap_info[1] &=
- ~IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS;
- iftype_data[i].he_cap.he_cap_elem.phy_cap_info[2] &=
- ~IEEE80211_HE_PHY_CAP2_MIDAMBLE_RX_TX_MAX_NSTS;
- iftype_data[i].he_cap.he_cap_elem.phy_cap_info[7] &=
- ~IEEE80211_HE_PHY_CAP7_MAX_NC_MASK;
- }
- }
+ for (i = 0; i < sband->n_iftype_data; i++)
+ iwl_nvm_fixup_sband_iftd(trans, sband, &iftype_data[i],
+ tx_chains, rx_chains);
+
iwl_init_he_6ghz_capa(trans, data, sband, tx_chains, rx_chains);
}
--
2.32.0
next prev parent reply other threads:[~2021-06-17 7:09 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-17 7:08 [PATCH 00/12] iwlwifi: updates intended for v5.14 2021-06-17 Luca Coelho
2021-06-17 7:08 ` [PATCH 01/12] iwlwifi: pcie: identify the RF module Luca Coelho
2021-06-17 7:08 ` [PATCH 02/12] iwlwifi: mvm: don't request SMPS in AP mode Luca Coelho
2021-06-17 7:08 ` [PATCH 03/12] iwlwifi: mvm: apply RX diversity per PHY context Luca Coelho
2021-06-17 7:08 ` [PATCH 04/12] iwlwifi: mvm: honour firmware SMPS requests Luca Coelho
2021-06-17 7:08 ` [PATCH 05/12] iwlwifi: mvm: fix error print when session protection ends Luca Coelho
2021-06-17 7:08 ` [PATCH 06/12] iwlwifi: mvm: Call NMI instead of REPLY_ERROR Luca Coelho
2021-06-17 7:08 ` Luca Coelho [this message]
2021-06-17 7:08 ` [PATCH 08/12] iwlwifi: mvm: support LMR feedback Luca Coelho
2021-06-17 7:08 ` [PATCH 09/12] iwlwifi: advertise broadcast TWT support Luca Coelho
2021-06-22 12:19 ` Luca Coelho
2021-06-17 7:08 ` [PATCH 10/12] iwlwifi: pcie: fix some kernel-doc comments Luca Coelho
2021-06-17 7:08 ` [PATCH 11/12] iwlwifi: pcie: remove TR/CR tail allocations Luca Coelho
2021-06-17 7:43 ` Johannes Berg
2021-06-17 8:07 ` [PATCH v2 " Luca Coelho
2021-06-22 12:20 ` Luca Coelho
2021-06-17 7:08 ` [PATCH 12/12] iwlwifi: mvm: Read acpi dsm to get unii4 enable/disable bitmap Luca Coelho
2021-06-22 12:21 ` Luca Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=iwlwifi.20210617100544.e8d0b02ec86b.Ia6ef8cc0480d38af25e6ac45fad9fb15bdfcbc2c@changeid \
--to=luca@coelho.fi \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.