[PATCH] drm/gma500: clean up indentation issues

[PATCH] drm/gma500: clean up indentation issues

[Colin King]

From: Colin Ian King <colin.king@canonical.com>

There are a couple of statements that are indented too deeply,
remove the extraneous tabs and also an empty line.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/gpu/drm/gma500/cdv_intel_dp.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c
index 720a767118c9..50016a754172 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_dp.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
@@ -1501,8 +1501,7 @@ cdv_intel_dp_start_link_train(struct gma_encoder *encoder)
 	clock_recovery = false;
 
 	DRM_DEBUG_KMS("Start train\n");
-		reg = DP | DP_LINK_TRAIN_PAT_1;
-
+	reg = DP | DP_LINK_TRAIN_PAT_1;
 
 	for (;;) {
 		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
@@ -1575,7 +1574,7 @@ cdv_intel_dp_complete_link_train(struct gma_encoder *encoder)
 	cr_tries = 0;
 
 	DRM_DEBUG_KMS("\n");
-		reg = DP | DP_LINK_TRAIN_PAT_2;
+	reg = DP | DP_LINK_TRAIN_PAT_2;
 
 	for (;;) {
 
-- 
2.27.0

Re: [PATCH] drm/gma500: clean up indentation issues

[Daniel Vetter]

On Sun, Sep 20, 2020 at 03:14:07PM +0100, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
> 
> There are a couple of statements that are indented too deeply,
> remove the extraneous tabs and also an empty line.
> 
> Signed-off-by: Colin Ian King <colin.king@canonical.com>

Pushed to drm-misc-next, thanks for your patch.
-Daniel

> ---
>  drivers/gpu/drm/gma500/cdv_intel_dp.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c
> index 720a767118c9..50016a754172 100644
> --- a/drivers/gpu/drm/gma500/cdv_intel_dp.c
> +++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
> @@ -1501,8 +1501,7 @@ cdv_intel_dp_start_link_train(struct gma_encoder *encoder)
>  	clock_recovery = false;
>  
>  	DRM_DEBUG_KMS("Start train\n");
> -		reg = DP | DP_LINK_TRAIN_PAT_1;
> -
> +	reg = DP | DP_LINK_TRAIN_PAT_1;
>  
>  	for (;;) {
>  		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
> @@ -1575,7 +1574,7 @@ cdv_intel_dp_complete_link_train(struct gma_encoder *encoder)
>  	cr_tries = 0;
>  
>  	DRM_DEBUG_KMS("\n");
> -		reg = DP | DP_LINK_TRAIN_PAT_2;
> +	reg = DP | DP_LINK_TRAIN_PAT_2;
>  
>  	for (;;) {
>  
> -- 
> 2.27.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch