kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>,
	Alex Williamson <alex.williamson@redhat.com>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	Christophe de Dinechin <dinechin@redhat.com>,
	Jason Wang <jasowang@redhat.com>,
	Kevin Tian <kevin.tian@intel.com>,
	peterx@redhat.com,
	Sean Christopherson <sean.j.christopherson@intel.com>,
	Yan Zhao <yan.y.zhao@intel.com>
Subject: [PATCH v9 09/14] KVM: selftests: Sync uapi/linux/kvm.h to tools/
Date: Sat, 23 May 2020 18:56:54 -0400	[thread overview]
Message-ID: <20200523225659.1027044-10-peterx@redhat.com> (raw)
In-Reply-To: <20200523225659.1027044-1-peterx@redhat.com>

This will be needed to extend the kvm selftest program.

Signed-off-by: Peter Xu <peterx@redhat.com>
---
 tools/include/uapi/linux/kvm.h | 53 ++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h
index 428c7dde6b4b..74f150c69ee6 100644
--- a/tools/include/uapi/linux/kvm.h
+++ b/tools/include/uapi/linux/kvm.h
@@ -236,6 +236,7 @@ struct kvm_hyperv_exit {
 #define KVM_EXIT_IOAPIC_EOI       26
 #define KVM_EXIT_HYPERV           27
 #define KVM_EXIT_ARM_NISV         28
+#define KVM_EXIT_DIRTY_RING_FULL  29
 
 /* For KVM_EXIT_INTERNAL_ERROR */
 /* Emulate instruction failed. */
@@ -1017,6 +1018,7 @@ struct kvm_ppc_resize_hpt {
 #define KVM_CAP_S390_VCPU_RESETS 179
 #define KVM_CAP_S390_PROTECTED 180
 #define KVM_CAP_PPC_SECURE_GUEST 181
+#define KVM_CAP_DIRTY_LOG_RING 182
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -1518,6 +1520,9 @@ struct kvm_pv_cmd {
 /* Available with KVM_CAP_S390_PROTECTED */
 #define KVM_S390_PV_COMMAND		_IOWR(KVMIO, 0xc5, struct kvm_pv_cmd)
 
+/* Available with KVM_CAP_DIRTY_LOG_RING */
+#define KVM_RESET_DIRTY_RINGS		_IO(KVMIO, 0xc6)
+
 /* Secure Encrypted Virtualization command */
 enum sev_cmd_id {
 	/* Guest initialization commands */
@@ -1671,4 +1676,52 @@ struct kvm_hyperv_eventfd {
 #define KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE    (1 << 0)
 #define KVM_DIRTY_LOG_INITIALLY_SET            (1 << 1)
 
+/*
+ * Arch needs to define the macro after implementing the dirty ring
+ * feature.  KVM_DIRTY_LOG_PAGE_OFFSET should be defined as the
+ * starting page offset of the dirty ring structures.
+ */
+#ifndef KVM_DIRTY_LOG_PAGE_OFFSET
+#define KVM_DIRTY_LOG_PAGE_OFFSET 0
+#endif
+
+/*
+ * KVM dirty GFN flags, defined as:
+ *
+ * |---------------+---------------+--------------|
+ * | bit 1 (reset) | bit 0 (dirty) | Status       |
+ * |---------------+---------------+--------------|
+ * |             0 |             0 | Invalid GFN  |
+ * |             0 |             1 | Dirty GFN    |
+ * |             1 |             X | GFN to reset |
+ * |---------------+---------------+--------------|
+ *
+ * Lifecycle of a dirty GFN goes like:
+ *
+ *      dirtied         collected        reset
+ * 00 -----------> 01 -------------> 1X -------+
+ *  ^                                          |
+ *  |                                          |
+ *  +------------------------------------------+
+ *
+ * The userspace program is only responsible for the 01->1X state
+ * conversion (to collect dirty bits).  Also, it must not skip any
+ * dirty bits so that dirty bits are always collected in sequence.
+ */
+#define KVM_DIRTY_GFN_F_DIRTY           BIT(0)
+#define KVM_DIRTY_GFN_F_RESET           BIT(1)
+#define KVM_DIRTY_GFN_F_MASK            0x3
+
+/*
+ * KVM dirty rings should be mapped at KVM_DIRTY_LOG_PAGE_OFFSET of
+ * per-vcpu mmaped regions as an array of struct kvm_dirty_gfn.  The
+ * size of the gfn buffer is decided by the first argument when
+ * enabling KVM_CAP_DIRTY_LOG_RING.
+ */
+struct kvm_dirty_gfn {
+	__u32 flags;
+	__u32 slot;
+	__u64 offset;
+};
+
 #endif /* __LINUX_KVM_H */
-- 
2.26.2


  parent reply	other threads:[~2020-05-23 22:58 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-23 22:56 [PATCH v9 00/14] KVM: Dirty ring interface Peter Xu
2020-05-23 22:56 ` [PATCH v9 01/14] KVM: X86: Change parameter for fast_page_fault tracepoint Peter Xu
2020-05-23 22:56 ` [PATCH v9 02/14] KVM: Cache as_id in kvm_memory_slot Peter Xu
2020-05-23 22:56 ` [PATCH v9 03/14] KVM: X86: Don't track dirty for KVM_SET_[TSS_ADDR|IDENTITY_MAP_ADDR] Peter Xu
2020-05-23 22:56 ` [PATCH v9 04/14] KVM: Pass in kvm pointer into mark_page_dirty_in_slot() Peter Xu
2020-05-23 22:56 ` [PATCH v9 05/14] KVM: X86: Implement ring-based dirty memory tracking Peter Xu
2020-05-25  2:48   ` kbuild test robot
2020-05-25 15:26     ` Peter Xu
     [not found]   ` <202005252245.ZeOB8qNJ%lkp@intel.com>
2020-05-25 15:33     ` Peter Xu
2020-05-23 22:56 ` [PATCH v9 06/14] KVM: Make dirty ring exclusive to dirty bitmap log Peter Xu
2020-05-23 22:56 ` [PATCH v9 07/14] KVM: Don't allocate dirty bitmap if dirty ring is enabled Peter Xu
2020-05-26 15:05   ` kbuild test robot
2020-05-26 15:21     ` Peter Xu
2020-05-27 12:53   ` kbuild test robot
2020-05-23 22:56 ` [PATCH v9 08/14] KVM: selftests: Always clear dirty bitmap after iteration Peter Xu
2020-05-23 22:56 ` Peter Xu [this message]
2020-05-23 22:56 ` [PATCH v9 10/14] KVM: selftests: Use a single binary for dirty/clear log test Peter Xu
2020-05-23 22:56 ` [PATCH v9 11/14] KVM: selftests: Introduce after_vcpu_run hook for dirty " Peter Xu
2020-05-23 22:56 ` [PATCH v9 12/14] KVM: selftests: Add dirty ring buffer test Peter Xu
2020-05-23 23:06 ` [PATCH v9 13/14] KVM: selftests: Let dirty_log_test async for dirty ring test Peter Xu
2020-05-23 23:06 ` [PATCH v9 14/14] KVM: selftests: Add "-c" parameter to dirty log test Peter Xu
2020-05-23 23:14 ` [PATCH v9 00/14] KVM: Dirty ring interface Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200523225659.1027044-10-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=dinechin@redhat.com \
    --cc=jasowang@redhat.com \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=sean.j.christopherson@intel.com \
    --cc=vkuznets@redhat.com \
    --cc=yan.y.zhao@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).