Re: [PATCH v3 7/9] KVM: VMX: Add guest physical address check in EPT violation and misconfig

[Sean Christopherson <sean.j.christopherson@intel.com>]

On Wed, Jul 15, 2020 at 04:00:08PM -0700, Sean Christopherson wrote:
> On Fri, Jul 10, 2020 at 05:48:09PM +0200, Mohammed Gamal wrote:
> > Check guest physical address against it's maximum physical memory. If
> > the guest's physical address exceeds the maximum (i.e. has reserved bits
> > set), inject a guest page fault with PFERR_RSVD_MASK set.
> > 
> > This has to be done both in the EPT violation and page fault paths, as
> > there are complications in both cases with respect to the computation
> > of the correct error code.
> > 
> > For EPT violations, unfortunately the only possibility is to emulate,
> > because the access type in the exit qualification might refer to an
> > access to a paging structure, rather than to the access performed by
> > the program.
> > 
> > Trapping page faults instead is needed in order to correct the error code,
> > but the access type can be obtained from the original error code and
> > passed to gva_to_gpa.  The corrections required in the error code are
> > subtle. For example, imagine that a PTE for a supervisor page has a reserved
> > bit set.  On a supervisor-mode access, the EPT violation path would trigger.
> > However, on a user-mode access, the processor will not notice the reserved
> > bit and not include PFERR_RSVD_MASK in the error code.
> > 
> > Co-developed-by: Mohammed Gamal <mgamal@redhat.com>
> > Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> > ---
> >  arch/x86/kvm/vmx/vmx.c | 24 +++++++++++++++++++++---
> >  arch/x86/kvm/vmx/vmx.h |  3 ++-
> >  2 files changed, 23 insertions(+), 4 deletions(-)
> > 
> > diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> > index 770b090969fb..de3f436b2d32 100644
> > --- a/arch/x86/kvm/vmx/vmx.c
> > +++ b/arch/x86/kvm/vmx/vmx.c
> > @@ -4790,9 +4790,15 @@ static int handle_exception_nmi(struct kvm_vcpu *vcpu)
> >  
> >  	if (is_page_fault(intr_info)) {
> >  		cr2 = vmx_get_exit_qual(vcpu);
> > -		/* EPT won't cause page fault directly */
> > -		WARN_ON_ONCE(!vcpu->arch.apf.host_apf_flags && enable_ept);
> > -		return kvm_handle_page_fault(vcpu, error_code, cr2, NULL, 0);
> > +		if (enable_ept && !vcpu->arch.apf.host_apf_flags) {
> > +			/*
> > +			 * EPT will cause page fault only if we need to
> > +			 * detect illegal GPAs.
> > +			 */
> > +			kvm_fixup_and_inject_pf_error(vcpu, cr2, error_code);
> 
> This splats when running the PKU unit test, although the test still passed.
> I haven't yet spent the brain power to determine if this is a benign warning,
> i.e. simply unexpected, or if permission_fault() fault truly can't handle PK
> faults.
> 
>   WARNING: CPU: 25 PID: 5465 at arch/x86/kvm/mmu.h:197 paging64_walk_addr_generic+0x594/0x750 [kvm]
>   Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0014.D62.2001092233 01/09/2020
>   RIP: 0010:paging64_walk_addr_generic+0x594/0x750 [kvm]
>   Code: <0f> 0b e9 db fe ff ff 44 8b 43 04 4c 89 6c 24 30 8b 13 41 39 d0 89
>   RSP: 0018:ff53778fc623fb60 EFLAGS: 00010202
>   RAX: 0000000000000001 RBX: ff53778fc623fbf0 RCX: 0000000000000007
>   RDX: 0000000000000001 RSI: 0000000000000002 RDI: ff4501efba818000
>   RBP: 0000000000000020 R08: 0000000000000005 R09: 00000000004000e7
>   R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007
>   R13: ff4501efba818388 R14: 10000000004000e7 R15: 0000000000000000
>   FS:  00007f2dcf31a700(0000) GS:ff4501f1c8040000(0000) knlGS:0000000000000000
>   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>   CR2: 0000000000000000 CR3: 0000001dea475005 CR4: 0000000000763ee0
>   DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>   DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>   PKRU: 55555554
>   Call Trace:
>    paging64_gva_to_gpa+0x3f/0xb0 [kvm]
>    kvm_fixup_and_inject_pf_error+0x48/0xa0 [kvm]
>    handle_exception_nmi+0x4fc/0x5b0 [kvm_intel]
>    kvm_arch_vcpu_ioctl_run+0x911/0x1c10 [kvm]
>    kvm_vcpu_ioctl+0x23e/0x5d0 [kvm]
>    ksys_ioctl+0x92/0xb0
>    __x64_sys_ioctl+0x16/0x20
>    do_syscall_64+0x3e/0xb0
>    entry_SYSCALL_64_after_hwframe+0x44/0xa9
>   ---[ end trace d17eb998aee991da ]---

Looks like this series got pulled for 5.9, has anyone looked into this?