From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>
Cc: Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Michael Kelley <mikelley@microsoft.com>,
Siddharth Chandrasekaran <sidcha@amazon.de>,
Yuan Yao <yuan.yao@linux.intel.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v11 02/46] KVM: selftests: Move "struct hv_enlightenments" to x86_64/svm.h
Date: Tue, 4 Oct 2022 14:39:12 +0200 [thread overview]
Message-ID: <20221004123956.188909-3-vkuznets@redhat.com> (raw)
In-Reply-To: <20221004123956.188909-1-vkuznets@redhat.com>
From: Sean Christopherson <seanjc@google.com>
Move Hyper-V's VMCB "struct hv_enlightenments" to the svm.h header so
that the struct can be referenced in "struct vmcb_control_area".
Alternatively, a dedicated header for SVM+Hyper-V could be added, a la
x86_64/evmcs.h, but it doesn't appear that Hyper-V will end up needing
a wholesale replacement for the VMCB.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
.../testing/selftests/kvm/include/x86_64/svm.h | 17 +++++++++++++++++
.../selftests/kvm/x86_64/hyperv_svm_test.c | 18 ------------------
2 files changed, 17 insertions(+), 18 deletions(-)
diff --git a/tools/testing/selftests/kvm/include/x86_64/svm.h b/tools/testing/selftests/kvm/include/x86_64/svm.h
index c8343ff84f7f..89ce2c6b57fe 100644
--- a/tools/testing/selftests/kvm/include/x86_64/svm.h
+++ b/tools/testing/selftests/kvm/include/x86_64/svm.h
@@ -58,6 +58,23 @@ enum {
INTERCEPT_RDPRU,
};
+struct hv_enlightenments {
+ struct __packed hv_enlightenments_control {
+ u32 nested_flush_hypercall:1;
+ u32 msr_bitmap:1;
+ u32 enlightened_npt_tlb: 1;
+ u32 reserved:29;
+ } __packed hv_enlightenments_control;
+ u32 hv_vp_id;
+ u64 hv_vm_id;
+ u64 partition_assist_page;
+ u64 reserved;
+} __packed;
+
+/*
+ * Hyper-V uses the software reserved clean bit in VMCB
+ */
+#define HV_VMCB_NESTED_ENLIGHTENMENTS (1U << 31)
struct __attribute__ ((__packed__)) vmcb_control_area {
u32 intercept_cr;
diff --git a/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c b/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c
index 5060fcfe1760..2fd64b419928 100644
--- a/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c
+++ b/tools/testing/selftests/kvm/x86_64/hyperv_svm_test.c
@@ -23,24 +23,6 @@
#define L2_GUEST_STACK_SIZE 256
-struct hv_enlightenments {
- struct __packed hv_enlightenments_control {
- u32 nested_flush_hypercall:1;
- u32 msr_bitmap:1;
- u32 enlightened_npt_tlb: 1;
- u32 reserved:29;
- } __packed hv_enlightenments_control;
- u32 hv_vp_id;
- u64 hv_vm_id;
- u64 partition_assist_page;
- u64 reserved;
-} __packed;
-
-/*
- * Hyper-V uses the software reserved clean bit in VMCB
- */
-#define HV_VMCB_NESTED_ENLIGHTENMENTS (1U << 31)
-
void l2_guest_code(void)
{
GUEST_SYNC(3);
--
2.37.3
next prev parent reply other threads:[~2022-10-04 12:40 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-04 12:39 [PATCH v11 00/46] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush features Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 01/46] x86/hyperv: Move VMCB enlightenment definitions to hyperv-tlfs.h Vitaly Kuznetsov
2022-10-04 12:39 ` Vitaly Kuznetsov [this message]
2022-10-04 12:39 ` [PATCH v11 03/46] KVM: SVM: Add a proper field for Hyper-V VMCB enlightenments Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 04/46] x86/hyperv: KVM: Rename "hv_enlightenments" to "hv_vmcb_enlightenments" Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 05/46] KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush' Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 06/46] KVM: VMX: Rename "vmx/evmcs.{ch}" to "vmx/hyperv.{ch}" Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 07/46] KVM: x86: Move clearing of TLB_FLUSH_CURRENT to kvm_vcpu_flush_tlb_all() Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 08/46] KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flag Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 09/46] KVM: x86: hyper-v: Introduce TLB flush fifo Vitaly Kuznetsov
2022-10-19 19:52 ` Sean Christopherson
2022-10-04 12:39 ` [PATCH v11 10/46] KVM: x86: hyper-v: Add helper to read hypercall data for array Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 11/46] KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently Vitaly Kuznetsov
2022-10-19 19:56 ` Sean Christopherson
2022-10-04 12:39 ` [PATCH v11 12/46] KVM: x86: hyper-v: Expose support for extended gva ranges for flush hypercalls Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 13/46] KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 14/46] x86/hyperv: Introduce HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK constants Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 15/46] KVM: x86: hyper-v: Use HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK instead of raw '64' Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 16/46] KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in kvm_hv_send_ipi() Vitaly Kuznetsov
2022-10-19 20:13 ` Sean Christopherson
2022-10-21 9:07 ` Vitaly Kuznetsov
2022-10-21 12:41 ` Vitaly Kuznetsov
2022-10-21 16:09 ` Sean Christopherson
2022-10-04 12:39 ` [PATCH v11 17/46] KVM: x86: hyper-v: Create a separate fifo for L2 TLB flush Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 18/46] KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead of on-stack 'sparse_banks' Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 19/46] KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in use Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 20/46] KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_id Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 21/46] KVM: x86: Introduce .hv_inject_synthetic_vmexit_post_tlb_flush() nested hook Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 22/46] KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall() Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 23/46] KVM: x86: hyper-v: L2 TLB flush Vitaly Kuznetsov
2022-10-19 21:53 ` Sean Christopherson
2022-10-04 12:39 ` [PATCH v11 24/46] KVM: x86: hyper-v: Introduce fast guest_hv_cpuid_has_l2_tlb_flush() check Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 25/46] KVM: nVMX: hyper-v: Cache VP assist page in 'struct kvm_vcpu_hv' Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 26/46] KVM: nVMX: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 27/46] KVM: x86: Make kvm_hv_get_assist_page() return 0/-errno Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 28/46] KVM: nSVM: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 29/46] KVM: x86: Expose Hyper-V L2 TLB flush feature Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 30/46] KVM: selftests: Better XMM read/write helpers Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 31/46] KVM: selftests: Move HYPERV_LINUX_OS_ID definition to a common header Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 32/46] KVM: selftests: Move the function doing Hyper-V hypercall " Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 33/46] KVM: selftests: Hyper-V PV IPI selftest Vitaly Kuznetsov
2022-10-19 22:08 ` Sean Christopherson
2022-10-21 13:20 ` Vitaly Kuznetsov
2022-10-21 13:42 ` Vitaly Kuznetsov
2022-10-21 16:14 ` Sean Christopherson
2022-10-04 12:39 ` [PATCH v11 34/46] KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 35/46] KVM: selftests: Export vm_vaddr_unused_gap() to make it possible to request unmapped ranges Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 36/46] KVM: selftests: Drop helpers to read/write page table entries Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 37/46] KVM: selftests: Hyper-V PV TLB flush selftest Vitaly Kuznetsov
2022-10-19 22:12 ` Sean Christopherson
2022-10-04 12:39 ` [PATCH v11 38/46] KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 39/46] KVM: selftests: Sync 'struct hv_vp_assist_page' " Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 40/46] KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.h Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 41/46] KVM: selftests: Split off load_evmcs() from load_vmcs() Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 42/46] KVM: selftests: Create a vendor independent helper to allocate Hyper-V specific test pages Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 43/46] KVM: selftests: Allocate Hyper-V partition assist page Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 44/46] KVM: selftests: evmcs_test: Introduce L2 TLB flush test Vitaly Kuznetsov
2022-10-19 22:19 ` Sean Christopherson
2022-10-21 14:50 ` Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 45/46] KVM: selftests: hyperv_svm_test: " Vitaly Kuznetsov
2022-10-04 12:39 ` [PATCH v11 46/46] KVM: selftests: Rename 'evmcs_test' to 'hyperv_evmcs' Vitaly Kuznetsov
2022-10-19 22:22 ` [PATCH v11 00/46] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush features Sean Christopherson
2022-10-20 8:22 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221004123956.188909-3-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=sidcha@amazon.de \
--cc=wanpengli@tencent.com \
--cc=yuan.yao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).