[PATCH v5 0/5] Simplify the module and kconfig structure in vfio

[PATCH v5 0/5] Simplify the module and kconfig structure in vfio

[Jason Gunthorpe]

This series does a little house cleaning to remove the SPAPR exported
symbols, presence in the public header file, and reduce the number of
modules that comprise VFIO.

v5:
 - Reword commit messages
 - Remove whitespace change from drivers/vfio/pci/vfio_pci_priv.h
v4: https://lore.kernel.org/r/0-v4-7993c351e9dc+33a818-vfio_modules_jgg@nvidia.com
 - Copy IBM copyright header to vfio_iommu_spapr_tce.c
 - Use "return" not "ret = " in vfio_spapr_ioctl_eeh_pe_op()
 - Use just "#if IS_ENABLED(CONFIG_EEH)"
v3: https://lore.kernel.org/r/0-v3-8db96837cdf9+784-vfio_modules_jgg@nvidia.com
 - New patch to fold SPAPR VFIO_CHECK_EXTENSION EEH code into the actual ioctl
 - Remove the 'case VFIO_EEH_PE_OP' indenting level
 - Just open code the calls and #ifdefs to eeh_dev_open()/release()
   instead of using inline wrappers
 - Rebase to v6.1-rc1
v2: https://lore.kernel.org/r/0-v2-18daead6a41e+98-vfio_modules_jgg@nvidia.com
 - Add stubs for vfio_virqfd_init()/vfio_virqfd_exit() so that linking
   works even if vfio_pci/etc is not selected
v1: https://lore.kernel.org/r/0-v1-10a2dba77915+c23-vfio_modules_jgg@nvidia.com

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Jason Gunthorpe (5):
  vfio/pci: Move all the SPAPR PCI specific logic to vfio_pci_core.ko
  vfio/spapr: Move VFIO_CHECK_EXTENSION into tce_iommu_ioctl()
  vfio: Move vfio_spapr_iommu_eeh_ioctl into vfio_iommu_spapr_tce.c
  vfio: Remove CONFIG_VFIO_SPAPR_EEH
  vfio: Fold vfio_virqfd.ko into vfio.ko

 drivers/vfio/Kconfig                |   7 +-
 drivers/vfio/Makefile               |   5 +-
 drivers/vfio/pci/vfio_pci_core.c    |  11 ++-
 drivers/vfio/vfio.h                 |  13 ++++
 drivers/vfio/vfio_iommu_spapr_tce.c |  65 ++++++++++++++---
 drivers/vfio/vfio_main.c            |   7 ++
 drivers/vfio/vfio_spapr_eeh.c       | 107 ----------------------------
 drivers/vfio/virqfd.c               |  17 +----
 include/linux/vfio.h                |  23 ------
 9 files changed, 91 insertions(+), 164 deletions(-)
 delete mode 100644 drivers/vfio/vfio_spapr_eeh.c


base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780
-- 
2.38.1

[PATCH v5 1/5] vfio/pci: Move all the SPAPR PCI specific logic to vfio_pci_core.ko

[Jason Gunthorpe]

The vfio_spapr_pci_eeh_open/release() functions are one line wrappers
around an arch function. Just call them directly. This eliminates some
weird exported symbols that don't need to exist.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
---
 drivers/vfio/pci/vfio_pci_core.c | 11 +++++++++--
 drivers/vfio/vfio_spapr_eeh.c    | 13 -------------
 include/linux/vfio.h             | 11 -----------
 3 files changed, 9 insertions(+), 26 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
index badc9d828cac20..c8b8a7a03eae7e 100644
--- a/drivers/vfio/pci/vfio_pci_core.c
+++ b/drivers/vfio/pci/vfio_pci_core.c
@@ -27,6 +27,9 @@
 #include <linux/vgaarb.h>
 #include <linux/nospec.h>
 #include <linux/sched/mm.h>
+#if IS_ENABLED(CONFIG_VFIO_SPAPR_EEH)
+#include <asm/eeh.h>
+#endif
 
 #include "vfio_pci_priv.h"
 
@@ -686,7 +689,9 @@ void vfio_pci_core_close_device(struct vfio_device *core_vdev)
 		vdev->sriov_pf_core_dev->vf_token->users--;
 		mutex_unlock(&vdev->sriov_pf_core_dev->vf_token->lock);
 	}
-	vfio_spapr_pci_eeh_release(vdev->pdev);
+#if IS_ENABLED(CONFIG_VFIO_SPAPR_EEH)
+	eeh_dev_release(vdev->pdev);
+#endif
 	vfio_pci_core_disable(vdev);
 
 	mutex_lock(&vdev->igate);
@@ -705,7 +710,9 @@ EXPORT_SYMBOL_GPL(vfio_pci_core_close_device);
 void vfio_pci_core_finish_enable(struct vfio_pci_core_device *vdev)
 {
 	vfio_pci_probe_mmaps(vdev);
-	vfio_spapr_pci_eeh_open(vdev->pdev);
+#if IS_ENABLED(CONFIG_VFIO_SPAPR_EEH)
+	eeh_dev_open(vdev->pdev);
+#endif
 
 	if (vdev->sriov_pf_core_dev) {
 		mutex_lock(&vdev->sriov_pf_core_dev->vf_token->lock);
diff --git a/drivers/vfio/vfio_spapr_eeh.c b/drivers/vfio/vfio_spapr_eeh.c
index 67f55ac1d459cc..c9d102aafbcd11 100644
--- a/drivers/vfio/vfio_spapr_eeh.c
+++ b/drivers/vfio/vfio_spapr_eeh.c
@@ -15,19 +15,6 @@
 #define DRIVER_AUTHOR	"Gavin Shan, IBM Corporation"
 #define DRIVER_DESC	"VFIO IOMMU SPAPR EEH"
 
-/* We might build address mapping here for "fast" path later */
-void vfio_spapr_pci_eeh_open(struct pci_dev *pdev)
-{
-	eeh_dev_open(pdev);
-}
-EXPORT_SYMBOL_GPL(vfio_spapr_pci_eeh_open);
-
-void vfio_spapr_pci_eeh_release(struct pci_dev *pdev)
-{
-	eeh_dev_release(pdev);
-}
-EXPORT_SYMBOL_GPL(vfio_spapr_pci_eeh_release);
-
 long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
 				unsigned int cmd, unsigned long arg)
 {
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index e7cebeb875dd1a..e8a5a9cdb9067f 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -231,21 +231,10 @@ int vfio_set_irqs_validate_and_prepare(struct vfio_irq_set *hdr,
 				       int num_irqs, int max_irq_type,
 				       size_t *data_size);
 
-struct pci_dev;
 #if IS_ENABLED(CONFIG_VFIO_SPAPR_EEH)
-void vfio_spapr_pci_eeh_open(struct pci_dev *pdev);
-void vfio_spapr_pci_eeh_release(struct pci_dev *pdev);
 long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group, unsigned int cmd,
 				unsigned long arg);
 #else
-static inline void vfio_spapr_pci_eeh_open(struct pci_dev *pdev)
-{
-}
-
-static inline void vfio_spapr_pci_eeh_release(struct pci_dev *pdev)
-{
-}
-
 static inline long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
 					      unsigned int cmd,
 					      unsigned long arg)
-- 
2.38.1

[PATCH v5 2/5] vfio/spapr: Move VFIO_CHECK_EXTENSION into tce_iommu_ioctl()

[Jason Gunthorpe]

The PPC64 kconfig is a bit of a rats nest, but it turns out that if
CONFIG_SPAPR_TCE_IOMMU is on then EEH must be too:

config SPAPR_TCE_IOMMU
	bool "sPAPR TCE IOMMU Support"
	depends on PPC_POWERNV || PPC_PSERIES
	select IOMMU_API
	help
	  Enables bits of IOMMU API required by VFIO. The iommu_ops
	  is not implemented as it is not necessary for VFIO.

config PPC_POWERNV
	select FORCE_PCI

config PPC_PSERIES
	select FORCE_PCI

config EEH
	bool
	depends on (PPC_POWERNV || PPC_PSERIES) && PCI
	default y

So, just open code the call to eeh_enabled() into tce_iommu_ioctl().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
---
 drivers/vfio/vfio_iommu_spapr_tce.c | 10 ++++------
 drivers/vfio/vfio_spapr_eeh.c       |  6 ------
 2 files changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c
index 169f07ac162d9c..73cec2beae70b1 100644
--- a/drivers/vfio/vfio_iommu_spapr_tce.c
+++ b/drivers/vfio/vfio_iommu_spapr_tce.c
@@ -785,14 +785,12 @@ static long tce_iommu_ioctl(void *iommu_data,
 		switch (arg) {
 		case VFIO_SPAPR_TCE_IOMMU:
 		case VFIO_SPAPR_TCE_v2_IOMMU:
-			ret = 1;
-			break;
+			return 1;
+		case VFIO_EEH:
+			return eeh_enabled();
 		default:
-			ret = vfio_spapr_iommu_eeh_ioctl(NULL, cmd, arg);
-			break;
+			return 0;
 		}
-
-		return (ret < 0) ? 0 : ret;
 	}
 
 	/*
diff --git a/drivers/vfio/vfio_spapr_eeh.c b/drivers/vfio/vfio_spapr_eeh.c
index c9d102aafbcd11..221b1b637e18b0 100644
--- a/drivers/vfio/vfio_spapr_eeh.c
+++ b/drivers/vfio/vfio_spapr_eeh.c
@@ -24,12 +24,6 @@ long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
 	long ret = -EINVAL;
 
 	switch (cmd) {
-	case VFIO_CHECK_EXTENSION:
-		if (arg == VFIO_EEH)
-			ret = eeh_enabled() ? 1 : 0;
-		else
-			ret = 0;
-		break;
 	case VFIO_EEH_PE_OP:
 		pe = eeh_iommu_group_to_pe(group);
 		if (!pe)
-- 
2.38.1

[PATCH v5 3/5] vfio: Move vfio_spapr_iommu_eeh_ioctl into vfio_iommu_spapr_tce.c

[Jason Gunthorpe]

As with the previous patch EEH is always enabled if SPAPR_TCE_IOMMU, so
move this last bit of code into the main module.

Now that this function only processes VFIO_EEH_PE_OP remove a level of
indenting as well, it is only called by a case statement that already
checked VFIO_EEH_PE_OP.

This eliminates an unnecessary module and SPAPR code in a global header.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
---
 drivers/vfio/Makefile               |  1 -
 drivers/vfio/vfio_iommu_spapr_tce.c | 55 +++++++++++++++++-
 drivers/vfio/vfio_spapr_eeh.c       | 88 -----------------------------
 include/linux/vfio.h                | 12 ----
 4 files changed, 53 insertions(+), 103 deletions(-)
 delete mode 100644 drivers/vfio/vfio_spapr_eeh.c

diff --git a/drivers/vfio/Makefile b/drivers/vfio/Makefile
index b693a1169286f8..50b8e8e3fb10dd 100644
--- a/drivers/vfio/Makefile
+++ b/drivers/vfio/Makefile
@@ -10,7 +10,6 @@ vfio-y += vfio_main.o \
 obj-$(CONFIG_VFIO_VIRQFD) += vfio_virqfd.o
 obj-$(CONFIG_VFIO_IOMMU_TYPE1) += vfio_iommu_type1.o
 obj-$(CONFIG_VFIO_IOMMU_SPAPR_TCE) += vfio_iommu_spapr_tce.o
-obj-$(CONFIG_VFIO_SPAPR_EEH) += vfio_spapr_eeh.o
 obj-$(CONFIG_VFIO_PCI) += pci/
 obj-$(CONFIG_VFIO_PLATFORM) += platform/
 obj-$(CONFIG_VFIO_MDEV) += mdev/
diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c
index 73cec2beae70b1..60a50ce8701e5c 100644
--- a/drivers/vfio/vfio_iommu_spapr_tce.c
+++ b/drivers/vfio/vfio_iommu_spapr_tce.c
@@ -4,6 +4,7 @@
  *
  * Copyright (C) 2013 IBM Corp.  All rights reserved.
  *     Author: Alexey Kardashevskiy <aik@ozlabs.ru>
+ * Copyright Gavin Shan, IBM Corporation 2014.
  *
  * Derived from original vfio_iommu_type1.c:
  * Copyright (C) 2012 Red Hat, Inc.  All rights reserved.
@@ -773,6 +774,57 @@ static long tce_iommu_create_default_window(struct tce_container *container)
 	return ret;
 }
 
+static long vfio_spapr_ioctl_eeh_pe_op(struct iommu_group *group,
+				       unsigned long arg)
+{
+	struct eeh_pe *pe;
+	struct vfio_eeh_pe_op op;
+	unsigned long minsz;
+
+	pe = eeh_iommu_group_to_pe(group);
+	if (!pe)
+		return -ENODEV;
+
+	minsz = offsetofend(struct vfio_eeh_pe_op, op);
+	if (copy_from_user(&op, (void __user *)arg, minsz))
+		return -EFAULT;
+	if (op.argsz < minsz || op.flags)
+		return -EINVAL;
+
+	switch (op.op) {
+	case VFIO_EEH_PE_DISABLE:
+		return eeh_pe_set_option(pe, EEH_OPT_DISABLE);
+	case VFIO_EEH_PE_ENABLE:
+		return eeh_pe_set_option(pe, EEH_OPT_ENABLE);
+	case VFIO_EEH_PE_UNFREEZE_IO:
+		return eeh_pe_set_option(pe, EEH_OPT_THAW_MMIO);
+	case VFIO_EEH_PE_UNFREEZE_DMA:
+		return eeh_pe_set_option(pe, EEH_OPT_THAW_DMA);
+	case VFIO_EEH_PE_GET_STATE:
+		return eeh_pe_get_state(pe);
+		break;
+	case VFIO_EEH_PE_RESET_DEACTIVATE:
+		return eeh_pe_reset(pe, EEH_RESET_DEACTIVATE, true);
+	case VFIO_EEH_PE_RESET_HOT:
+		return eeh_pe_reset(pe, EEH_RESET_HOT, true);
+	case VFIO_EEH_PE_RESET_FUNDAMENTAL:
+		return eeh_pe_reset(pe, EEH_RESET_FUNDAMENTAL, true);
+	case VFIO_EEH_PE_CONFIGURE:
+		return eeh_pe_configure(pe);
+	case VFIO_EEH_PE_INJECT_ERR:
+		minsz = offsetofend(struct vfio_eeh_pe_op, err.mask);
+		if (op.argsz < minsz)
+			return -EINVAL;
+		if (copy_from_user(&op, (void __user *)arg, minsz))
+			return -EFAULT;
+
+		return eeh_pe_inject_err(pe, op.err.type, op.err.func,
+					 op.err.addr, op.err.mask);
+	default:
+		return -EINVAL;
+	}
+}
+
 static long tce_iommu_ioctl(void *iommu_data,
 				 unsigned int cmd, unsigned long arg)
 {
@@ -1044,8 +1096,7 @@ static long tce_iommu_ioctl(void *iommu_data,
 
 		ret = 0;
 		list_for_each_entry(tcegrp, &container->group_list, next) {
-			ret = vfio_spapr_iommu_eeh_ioctl(tcegrp->grp,
-					cmd, arg);
+			ret = vfio_spapr_ioctl_eeh_pe_op(tcegrp->grp, arg);
 			if (ret)
 				return ret;
 		}
diff --git a/drivers/vfio/vfio_spapr_eeh.c b/drivers/vfio/vfio_spapr_eeh.c
deleted file mode 100644
index 221b1b637e18b0..00000000000000
--- a/drivers/vfio/vfio_spapr_eeh.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * EEH functionality support for VFIO devices. The feature is only
- * available on sPAPR compatible platforms.
- *
- * Copyright Gavin Shan, IBM Corporation 2014.
- */
-
-#include <linux/module.h>
-#include <linux/uaccess.h>
-#include <linux/vfio.h>
-#include <asm/eeh.h>
-
-#define DRIVER_VERSION	"0.1"
-#define DRIVER_AUTHOR	"Gavin Shan, IBM Corporation"
-#define DRIVER_DESC	"VFIO IOMMU SPAPR EEH"
-
-long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
-				unsigned int cmd, unsigned long arg)
-{
-	struct eeh_pe *pe;
-	struct vfio_eeh_pe_op op;
-	unsigned long minsz;
-	long ret = -EINVAL;
-
-	switch (cmd) {
-	case VFIO_EEH_PE_OP:
-		pe = eeh_iommu_group_to_pe(group);
-		if (!pe)
-			return -ENODEV;
-
-		minsz = offsetofend(struct vfio_eeh_pe_op, op);
-		if (copy_from_user(&op, (void __user *)arg, minsz))
-			return -EFAULT;
-		if (op.argsz < minsz || op.flags)
-			return -EINVAL;
-
-		switch (op.op) {
-		case VFIO_EEH_PE_DISABLE:
-			ret = eeh_pe_set_option(pe, EEH_OPT_DISABLE);
-			break;
-		case VFIO_EEH_PE_ENABLE:
-			ret = eeh_pe_set_option(pe, EEH_OPT_ENABLE);
-			break;
-		case VFIO_EEH_PE_UNFREEZE_IO:
-			ret = eeh_pe_set_option(pe, EEH_OPT_THAW_MMIO);
-			break;
-		case VFIO_EEH_PE_UNFREEZE_DMA:
-			ret = eeh_pe_set_option(pe, EEH_OPT_THAW_DMA);
-			break;
-		case VFIO_EEH_PE_GET_STATE:
-			ret = eeh_pe_get_state(pe);
-			break;
-		case VFIO_EEH_PE_RESET_DEACTIVATE:
-			ret = eeh_pe_reset(pe, EEH_RESET_DEACTIVATE, true);
-			break;
-		case VFIO_EEH_PE_RESET_HOT:
-			ret = eeh_pe_reset(pe, EEH_RESET_HOT, true);
-			break;
-		case VFIO_EEH_PE_RESET_FUNDAMENTAL:
-			ret = eeh_pe_reset(pe, EEH_RESET_FUNDAMENTAL, true);
-			break;
-		case VFIO_EEH_PE_CONFIGURE:
-			ret = eeh_pe_configure(pe);
-			break;
-		case VFIO_EEH_PE_INJECT_ERR:
-			minsz = offsetofend(struct vfio_eeh_pe_op, err.mask);
-			if (op.argsz < minsz)
-				return -EINVAL;
-			if (copy_from_user(&op, (void __user *)arg, minsz))
-				return -EFAULT;
-
-			ret = eeh_pe_inject_err(pe, op.err.type, op.err.func,
-						op.err.addr, op.err.mask);
-			break;
-		default:
-			ret = -EINVAL;
-		}
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(vfio_spapr_iommu_eeh_ioctl);
-
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index e8a5a9cdb9067f..bd9faaab85de18 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -231,18 +231,6 @@ int vfio_set_irqs_validate_and_prepare(struct vfio_irq_set *hdr,
 				       int num_irqs, int max_irq_type,
 				       size_t *data_size);
 
-#if IS_ENABLED(CONFIG_VFIO_SPAPR_EEH)
-long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group, unsigned int cmd,
-				unsigned long arg);
-#else
-static inline long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
-					      unsigned int cmd,
-					      unsigned long arg)
-{
-	return -ENOTTY;
-}
-#endif /* CONFIG_VFIO_SPAPR_EEH */
-
 /*
  * IRQfd - generic
  */
-- 
2.38.1

[PATCH v5 4/5] vfio: Remove CONFIG_VFIO_SPAPR_EEH

[Jason Gunthorpe]

We don't need a kconfig symbol for this, just directly test CONFIG_EEH in
the few places that need it.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
---
 drivers/vfio/Kconfig             | 5 -----
 drivers/vfio/pci/vfio_pci_core.c | 6 +++---
 2 files changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/vfio/Kconfig b/drivers/vfio/Kconfig
index 86c381ceb9a1e9..d25b91adfd64cd 100644
--- a/drivers/vfio/Kconfig
+++ b/drivers/vfio/Kconfig
@@ -20,11 +20,6 @@ config VFIO_IOMMU_SPAPR_TCE
 	depends on SPAPR_TCE_IOMMU
 	default VFIO
 
-config VFIO_SPAPR_EEH
-	tristate
-	depends on EEH && VFIO_IOMMU_SPAPR_TCE
-	default VFIO
-
 config VFIO_VIRQFD
 	tristate
 	select EVENTFD
diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
index c8b8a7a03eae7e..b0c83e1fce6eb6 100644
--- a/drivers/vfio/pci/vfio_pci_core.c
+++ b/drivers/vfio/pci/vfio_pci_core.c
@@ -27,7 +27,7 @@
 #include <linux/vgaarb.h>
 #include <linux/nospec.h>
 #include <linux/sched/mm.h>
-#if IS_ENABLED(CONFIG_VFIO_SPAPR_EEH)
+#if IS_ENABLED(CONFIG_EEH)
 #include <asm/eeh.h>
 #endif
 
@@ -689,7 +689,7 @@ void vfio_pci_core_close_device(struct vfio_device *core_vdev)
 		vdev->sriov_pf_core_dev->vf_token->users--;
 		mutex_unlock(&vdev->sriov_pf_core_dev->vf_token->lock);
 	}
-#if IS_ENABLED(CONFIG_VFIO_SPAPR_EEH)
+#if IS_ENABLED(CONFIG_EEH)
 	eeh_dev_release(vdev->pdev);
 #endif
 	vfio_pci_core_disable(vdev);
@@ -710,7 +710,7 @@ EXPORT_SYMBOL_GPL(vfio_pci_core_close_device);
 void vfio_pci_core_finish_enable(struct vfio_pci_core_device *vdev)
 {
 	vfio_pci_probe_mmaps(vdev);
-#if IS_ENABLED(CONFIG_VFIO_SPAPR_EEH)
+#if IS_ENABLED(CONFIG_EEH)
 	eeh_dev_open(vdev->pdev);
 #endif
 
-- 
2.38.1

[PATCH v5 5/5] vfio: Fold vfio_virqfd.ko into vfio.ko

[Jason Gunthorpe]

This is only 1.8k, putting it in its own module is not really
necessary. The kconfig infrastructure is still there to completely remove
it for systems that are trying for small footprint.

Put it in the main vfio.ko module now that kbuild can support multiple .c
files.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
---
 drivers/vfio/Kconfig     |  2 +-
 drivers/vfio/Makefile    |  4 +---
 drivers/vfio/vfio.h      | 13 +++++++++++++
 drivers/vfio/vfio_main.c |  7 +++++++
 drivers/vfio/virqfd.c    | 17 +++--------------
 5 files changed, 25 insertions(+), 18 deletions(-)

diff --git a/drivers/vfio/Kconfig b/drivers/vfio/Kconfig
index d25b91adfd64cd..0b8d53f63c7e5c 100644
--- a/drivers/vfio/Kconfig
+++ b/drivers/vfio/Kconfig
@@ -21,7 +21,7 @@ config VFIO_IOMMU_SPAPR_TCE
 	default VFIO
 
 config VFIO_VIRQFD
-	tristate
+	bool
 	select EVENTFD
 	default n
 
diff --git a/drivers/vfio/Makefile b/drivers/vfio/Makefile
index 50b8e8e3fb10dd..0721ed4831c92f 100644
--- a/drivers/vfio/Makefile
+++ b/drivers/vfio/Makefile
@@ -1,13 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
-vfio_virqfd-y := virqfd.o
-
 obj-$(CONFIG_VFIO) += vfio.o
 
 vfio-y += vfio_main.o \
 	  iova_bitmap.o \
 	  container.o
+vfio-$(CONFIG_VFIO_VIRQFD) += virqfd.o
 
-obj-$(CONFIG_VFIO_VIRQFD) += vfio_virqfd.o
 obj-$(CONFIG_VFIO_IOMMU_TYPE1) += vfio_iommu_type1.o
 obj-$(CONFIG_VFIO_IOMMU_SPAPR_TCE) += vfio_iommu_spapr_tce.o
 obj-$(CONFIG_VFIO_PCI) += pci/
diff --git a/drivers/vfio/vfio.h b/drivers/vfio/vfio.h
index bcad54bbab08c4..a7113b4baaa242 100644
--- a/drivers/vfio/vfio.h
+++ b/drivers/vfio/vfio.h
@@ -124,6 +124,19 @@ long vfio_container_ioctl_check_extension(struct vfio_container *container,
 int __init vfio_container_init(void);
 void vfio_container_cleanup(void);
 
+#if IS_ENABLED(CONFIG_VFIO_VIRQFD)
+int __init vfio_virqfd_init(void);
+void vfio_virqfd_exit(void);
+#else
+static inline int __init vfio_virqfd_init(void)
+{
+	return 0;
+}
+static inline void vfio_virqfd_exit(void)
+{
+}
+#endif
+
 #ifdef CONFIG_VFIO_NOIOMMU
 extern bool vfio_noiommu __read_mostly;
 #else
diff --git a/drivers/vfio/vfio_main.c b/drivers/vfio/vfio_main.c
index 2d168793d4e1ce..97d7b88c8fe1f4 100644
--- a/drivers/vfio/vfio_main.c
+++ b/drivers/vfio/vfio_main.c
@@ -1814,6 +1814,10 @@ static int __init vfio_init(void)
 	if (ret)
 		return ret;
 
+	ret = vfio_virqfd_init();
+	if (ret)
+		goto err_virqfd;
+
 	/* /dev/vfio/$GROUP */
 	vfio.class = class_create(THIS_MODULE, "vfio");
 	if (IS_ERR(vfio.class)) {
@@ -1844,6 +1848,8 @@ static int __init vfio_init(void)
 	class_destroy(vfio.class);
 	vfio.class = NULL;
 err_group_class:
+	vfio_virqfd_exit();
+err_virqfd:
 	vfio_container_cleanup();
 	return ret;
 }
@@ -1858,6 +1864,7 @@ static void __exit vfio_cleanup(void)
 	class_destroy(vfio.device_class);
 	vfio.device_class = NULL;
 	class_destroy(vfio.class);
+	vfio_virqfd_exit();
 	vfio_container_cleanup();
 	vfio.class = NULL;
 	xa_destroy(&vfio_device_set_xa);
diff --git a/drivers/vfio/virqfd.c b/drivers/vfio/virqfd.c
index 414e98d82b02e5..497a17b3786568 100644
--- a/drivers/vfio/virqfd.c
+++ b/drivers/vfio/virqfd.c
@@ -12,15 +12,12 @@
 #include <linux/file.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-
-#define DRIVER_VERSION  "0.1"
-#define DRIVER_AUTHOR   "Alex Williamson <alex.williamson@redhat.com>"
-#define DRIVER_DESC     "IRQFD support for VFIO bus drivers"
+#include "vfio.h"
 
 static struct workqueue_struct *vfio_irqfd_cleanup_wq;
 static DEFINE_SPINLOCK(virqfd_lock);
 
-static int __init vfio_virqfd_init(void)
+int __init vfio_virqfd_init(void)
 {
 	vfio_irqfd_cleanup_wq =
 		create_singlethread_workqueue("vfio-irqfd-cleanup");
@@ -30,7 +27,7 @@ static int __init vfio_virqfd_init(void)
 	return 0;
 }
 
-static void __exit vfio_virqfd_exit(void)
+void vfio_virqfd_exit(void)
 {
 	destroy_workqueue(vfio_irqfd_cleanup_wq);
 }
@@ -216,11 +213,3 @@ void vfio_virqfd_disable(struct virqfd **pvirqfd)
 	flush_workqueue(vfio_irqfd_cleanup_wq);
 }
 EXPORT_SYMBOL_GPL(vfio_virqfd_disable);
-
-module_init(vfio_virqfd_init);
-module_exit(vfio_virqfd_exit);
-
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-- 
2.38.1

Re: [PATCH v5 1/5] vfio/pci: Move all the SPAPR PCI specific logic to vfio_pci_core.ko

[Cornelia Huck]

On Mon, Dec 05 2022, Jason Gunthorpe <jgg@nvidia.com> wrote:

> The vfio_spapr_pci_eeh_open/release() functions are one line wrappers
> around an arch function. Just call them directly. This eliminates some
> weird exported symbols that don't need to exist.
>
> Reviewed-by: Christoph Hellwig <hch@lst.de>
> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
> ---
>  drivers/vfio/pci/vfio_pci_core.c | 11 +++++++++--
>  drivers/vfio/vfio_spapr_eeh.c    | 13 -------------
>  include/linux/vfio.h             | 11 -----------
>  3 files changed, 9 insertions(+), 26 deletions(-)

Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Re: [PATCH v5 5/5] vfio: Fold vfio_virqfd.ko into vfio.ko

[Cornelia Huck]

On Mon, Dec 05 2022, Jason Gunthorpe <jgg@nvidia.com> wrote:

> This is only 1.8k, putting it in its own module is not really
> necessary. The kconfig infrastructure is still there to completely remove
> it for systems that are trying for small footprint.
>
> Put it in the main vfio.ko module now that kbuild can support multiple .c
> files.
>
> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
> ---
>  drivers/vfio/Kconfig     |  2 +-
>  drivers/vfio/Makefile    |  4 +---
>  drivers/vfio/vfio.h      | 13 +++++++++++++
>  drivers/vfio/vfio_main.c |  7 +++++++
>  drivers/vfio/virqfd.c    | 17 +++--------------
>  5 files changed, 25 insertions(+), 18 deletions(-)

Reviewed-by: Cornelia Huck <cohuck@redhat.com>

Re: [PATCH v5 0/5] Simplify the module and kconfig structure in vfio

[Alex Williamson]

On Mon,  5 Dec 2022 11:29:15 -0400
Jason Gunthorpe <jgg@nvidia.com> wrote:

> This series does a little house cleaning to remove the SPAPR exported
> symbols, presence in the public header file, and reduce the number of
> modules that comprise VFIO.
> 
> v5:
>  - Reword commit messages
>  - Remove whitespace change from drivers/vfio/pci/vfio_pci_priv.h
> v4: https://lore.kernel.org/r/0-v4-7993c351e9dc+33a818-vfio_modules_jgg@nvidia.com
>  - Copy IBM copyright header to vfio_iommu_spapr_tce.c
>  - Use "return" not "ret = " in vfio_spapr_ioctl_eeh_pe_op()
>  - Use just "#if IS_ENABLED(CONFIG_EEH)"
> v3: https://lore.kernel.org/r/0-v3-8db96837cdf9+784-vfio_modules_jgg@nvidia.com
>  - New patch to fold SPAPR VFIO_CHECK_EXTENSION EEH code into the actual ioctl
>  - Remove the 'case VFIO_EEH_PE_OP' indenting level
>  - Just open code the calls and #ifdefs to eeh_dev_open()/release()
>    instead of using inline wrappers
>  - Rebase to v6.1-rc1
> v2: https://lore.kernel.org/r/0-v2-18daead6a41e+98-vfio_modules_jgg@nvidia.com
>  - Add stubs for vfio_virqfd_init()/vfio_virqfd_exit() so that linking
>    works even if vfio_pci/etc is not selected
> v1: https://lore.kernel.org/r/0-v1-10a2dba77915+c23-vfio_modules_jgg@nvidia.com
> 
> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
> 
> Jason Gunthorpe (5):
>   vfio/pci: Move all the SPAPR PCI specific logic to vfio_pci_core.ko
>   vfio/spapr: Move VFIO_CHECK_EXTENSION into tce_iommu_ioctl()
>   vfio: Move vfio_spapr_iommu_eeh_ioctl into vfio_iommu_spapr_tce.c
>   vfio: Remove CONFIG_VFIO_SPAPR_EEH
>   vfio: Fold vfio_virqfd.ko into vfio.ko
> 
>  drivers/vfio/Kconfig                |   7 +-
>  drivers/vfio/Makefile               |   5 +-
>  drivers/vfio/pci/vfio_pci_core.c    |  11 ++-
>  drivers/vfio/vfio.h                 |  13 ++++
>  drivers/vfio/vfio_iommu_spapr_tce.c |  65 ++++++++++++++---
>  drivers/vfio/vfio_main.c            |   7 ++
>  drivers/vfio/vfio_spapr_eeh.c       | 107 ----------------------------
>  drivers/vfio/virqfd.c               |  17 +----
>  include/linux/vfio.h                |  23 ------
>  9 files changed, 91 insertions(+), 164 deletions(-)
>  delete mode 100644 drivers/vfio/vfio_spapr_eeh.c
> 
> 
> base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780

Applied to vfio next branch for v6.2.  Thanks,

Alex