Re: [PATCH v3 6/9] x86/smpboot: Support parallel startup of secondary CPUs

[David Woodhouse <dwmw2@infradead.org>]

[-- Attachment #1: Type: text/plain, Size: 13714 bytes --]

On Thu, 2021-12-16 at 19:20 +0000, David Woodhouse wrote:
> On Thu, 2021-12-16 at 13:00 -0600, Tom Lendacky wrote:
> > On 12/16/21 12:24 PM, David Woodhouse wrote:
> > > On Thu, 2021-12-16 at 08:24 -0600, Tom Lendacky wrote:
> > > 
> > > > This will break an SEV-ES guest because CPUID will generate a #VC and a
> > > > #VC handler has not been established yet.
> > > > 
> > > > I guess for now, you can probably just not enable parallel startup for
> > > > SEV-ES guests.
> > > 
> > > OK, thanks. I'll expand it to allow 24 bits of (physical) APIC ID then,
> > > since it's no longer limited to CPUs without X2APIC. Then we can
> > > refrain from doing parallel bringup for SEV-ES guests, as you suggest.
> > > 
> > > What precisely is the check I should be using for that?
> > 
> > Calling cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT) will return true for 
> > an SEV-ES guest.
> 
> Thanks. Incremental patch (which I'll roll into Thomas's patch) looks a
> bit like this. Testing it now...

Further inspection shows I really did want a bit to indicate that this
is a secondary AP startup, which Thomas had documented as such in the
comments in head_64.S but then actually called STARTUP_USE_APICID. 

Otherwise the special case of smpboot_control==zero for startup of the
BSP which uses the pre-existing initial_gs etc., might also get invoked
in the rare case that an AP has APIC ID #0.

So we really do need Sean's fix to do the masking in the right place,
which I had 'fixed' by removing that mask altogether. And we also need
Sean's fix to stop scribbling on initial_fs when each AP will calculate
it for itself anyway.

I've rebased and pushed to
https://git.infradead.org/users/dwmw2/linux.git/shortlog/refs/heads/parallel-5.17

I'll do some more testing and repost the series during next week. The
win is slightly more modest than the original patch sets because it now
only parallelises x86/cpu:kick. I'm going to do more careful review and
testing before doing the same for x86/cpu:wait-init in a later series.
You can see that coming together in the git tree but I'm only going to
post up to the 'Serialise topology updates' patch again for now.

The only real change is this patch; perhaps now we've fixed it Thomas
will provide a Signed-off-by for it? :)

Now looks like this...

From 888741f787a2e59b1471f15177c1ba981d06ad04 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 12 Feb 2021 18:30:28 +0100
Subject: [PATCH v3.1 6/9] x86/smpboot: Support parallel startup of secondary CPUs

To allow for parallel AP bringup, we need to avoid the use of global
variables for passing information to the APs, as well as preventing them
from all trying to use the same real-mode stack simultaneously.

So, introduce a 'lock' field in struct trampoline_header to use as a
simple bit-spinlock for the real-mode stack. That lock also protects
the global variables initial_gs, initial_stack and early_gdt_descr,
which can now be calculated...

So how do we calculate those addresses? Well, they they can all be found
from the per_cpu data for this CPU. Simples! Except... how does it know
what its CPU# is? OK, we export the cpuid_to_apicid[] array and it can
search it to find its APIC ID in there.

But now you whine at me that it doesn't even know its APIC ID? Well, if
it's a relatively modern CPU then the APIC ID is in CPUID leaf 0x0B so
we can use that. Otherwise... erm... OK, otherwise it can't have parallel
CPU bringup for now. We'll still use a global variable for those CPUs and
bring them up one at a time.

So add a global 'smpboot_control' field which either contains the APIC
ID, or a flag indicating that it can be found in CPUID.

This adds the 'do_parallel_bringup' flag in preparation but doesn't
actually enable parallel bringup yet.

[ dwmw2: Minor tweaks, write a commit message ]
[ seanc: Fix stray override of initial_gs in common_cpu_up() ]
Not-signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 arch/x86/include/asm/realmode.h      |  3 ++
 arch/x86/include/asm/smp.h           |  9 +++-
 arch/x86/kernel/acpi/sleep.c         |  1 +
 arch/x86/kernel/apic/apic.c          |  2 +-
 arch/x86/kernel/head_64.S            | 73 ++++++++++++++++++++++++++++
 arch/x86/kernel/smpboot.c            | 32 ++++++++++--
 arch/x86/realmode/init.c             |  3 ++
 arch/x86/realmode/rm/trampoline_64.S | 14 ++++++
 kernel/smpboot.c                     |  2 +-
 9 files changed, 132 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index 331474b150f1..1693bc834163 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -51,6 +51,7 @@ struct trampoline_header {
 	u64 efer;
 	u32 cr4;
 	u32 flags;
+	u32 lock;
 #endif
 };
 
@@ -64,6 +65,8 @@ extern unsigned long initial_stack;
 extern unsigned long initial_vc_handler;
 #endif
 
+extern u32 *trampoline_lock;
+
 extern unsigned char real_mode_blob[];
 extern unsigned char real_mode_relocs[];
 
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 81a0211a372d..4fe1320c2e8d 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -196,5 +196,12 @@ extern void nmi_selftest(void);
 #define nmi_selftest() do { } while (0)
 #endif
 
-#endif /* __ASSEMBLY__ */
+extern unsigned int smpboot_control;
+
+#endif /* !__ASSEMBLY__ */
+
+/* Control bits for startup_64 */
+#define	STARTUP_PARALLEL	0x80000000
+#define	STARTUP_SECONDARY	0x40000000
+
 #endif /* _ASM_X86_SMP_H */
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 1e97f944b47d..4f26cc9346ac 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -114,6 +114,7 @@ int x86_acpi_suspend_lowlevel(void)
 	early_gdt_descr.address =
 			(unsigned long)get_cpu_gdt_rw(smp_processor_id());
 	initial_gs = per_cpu_offset(smp_processor_id());
+	smpboot_control = 0;
 #endif
 	initial_code = (unsigned long)wakeup_long64;
        saved_magic = 0x123456789abcdef0L;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index b70344bf6600..5b20e051d84c 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2335,7 +2335,7 @@ static int nr_logical_cpuids = 1;
 /*
  * Used to store mapping between logical CPU IDs and APIC IDs.
  */
-static int cpuid_to_apicid[] = {
+int cpuid_to_apicid[] = {
 	[0 ... NR_CPUS - 1] = -1,
 };
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 9c63fc5988cd..b0d8c9fffc73 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -25,6 +25,7 @@
 #include <asm/export.h>
 #include <asm/nospec-branch.h>
 #include <asm/fixmap.h>
+#include <asm/smp.h>
 
 /*
  * We are not able to switch in one step to the final KERNEL ADDRESS SPACE
@@ -193,6 +194,66 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 1:
 	UNWIND_HINT_EMPTY
 
+	/*
+	 * Is this the boot CPU coming up? If so everything is available
+	 * in initial_gs, initial_stack and early_gdt_descr.
+	 */
+	movl	smpboot_control(%rip), %eax
+	testl	%eax, %eax
+	jz	.Lsetup_cpu
+
+	/*
+	 * Secondary CPUs find out the offsets via the APIC ID. For parallel
+	 * boot the APIC ID is retrieved from CPUID, otherwise it's encoded
+	 * in smpboot_control:
+	 * Bit 0-29	APIC ID if STARTUP_PARALLEL flag is not set
+	 * Bit 30	STARTUP_SECONDARY flag
+	 * Bit 31	STARTUP_PARALLEL flag (use CPUID 0x0b for APIC ID)
+	 */
+	testl	$STARTUP_PARALLEL, %eax
+	jnz	.Luse_cpuid_0b
+	andl	$0x0FFFFFFF, %eax
+	jmp	.Lsetup_AP
+
+.Luse_cpuid_0b:
+	mov	$0x0B, %eax
+	xorl	%ecx, %ecx
+	cpuid
+	mov	%edx, %eax
+
+.Lsetup_AP:
+	/* EAX contains the APICID of the current CPU */
+	xorl	%ecx, %ecx
+	leaq	cpuid_to_apicid(%rip), %rbx
+
+.Lfind_cpunr:
+	cmpl	(%rbx), %eax
+	jz	.Linit_cpu_data
+	addq	$4, %rbx
+	addq	$8, %rcx
+	jmp	.Lfind_cpunr
+
+.Linit_cpu_data:
+	/* Get the per cpu offset */
+	leaq	__per_cpu_offset(%rip), %rbx
+	addq	%rcx, %rbx
+	movq	(%rbx), %rbx
+	/* Save it for GS BASE setup */
+	movq	%rbx, initial_gs(%rip)
+
+	/* Calculate the GDT address */
+	movq	$gdt_page, %rcx
+	addq	%rbx, %rcx
+	movq	%rcx, early_gdt_descr_base(%rip)
+
+	/* Find the idle task stack */
+	movq	$idle_threads, %rcx
+	addq	%rbx, %rcx
+	movq	(%rcx), %rcx
+	movq	TASK_threadsp(%rcx), %rcx
+	movq	%rcx, initial_stack(%rip)
+
+.Lsetup_cpu:
 	/*
 	 * We must switch to a new descriptor in kernel space for the GDT
 	 * because soon the kernel won't have access anymore to the userspace
@@ -233,6 +294,14 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
 	 */
 	movq initial_stack(%rip), %rsp
 
+	/* Drop the realmode protection. For the boot CPU the pointer is NULL! */
+	movq	trampoline_lock(%rip), %rax
+	testq	%rax, %rax
+	jz	.Lsetup_idt
+	lock
+	btrl	$0, (%rax)
+
+.Lsetup_idt:
 	/* Setup and Load IDT */
 	pushq	%rsi
 	call	early_setup_idt
@@ -364,6 +433,7 @@ SYM_DATA(initial_vc_handler,	.quad handle_vc_boot_ghcb)
  * reliably detect the end of the stack.
  */
 SYM_DATA(initial_stack, .quad init_thread_union + THREAD_SIZE - FRAME_SIZE)
+SYM_DATA(trampoline_lock, .quad 0);
 	__FINITDATA
 
 	__INIT
@@ -589,6 +659,9 @@ SYM_DATA_END(level1_fixmap_pgt)
 SYM_DATA(early_gdt_descr,		.word GDT_ENTRIES*8-1)
 SYM_DATA_LOCAL(early_gdt_descr_base,	.quad INIT_PER_CPU_VAR(gdt_page))
 
+	.align 16
+SYM_DATA(smpboot_control,		.long 0)
+
 	.align 16
 /* This must match the first entry in level2_kernel_pgt */
 SYM_DATA(phys_base, .quad 0x0)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 38c5d65a568d..e060bbd79cc2 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -808,6 +808,16 @@ static int __init cpu_init_udelay(char *str)
 }
 early_param("cpu_init_udelay", cpu_init_udelay);
 
+static bool do_parallel_bringup = true;
+
+static int __init no_parallel_bringup(char *str)
+{
+	do_parallel_bringup = false;
+
+	return 0;
+}
+early_param("no_parallel_bringup", no_parallel_bringup);
+
 static void __init smp_quirk_init_udelay(void)
 {
 	/* if cmdline changed it from default, leave it alone */
@@ -1095,8 +1105,6 @@ int common_cpu_up(unsigned int cpu, struct task_struct *idle)
 #ifdef CONFIG_X86_32
 	/* Stack for startup_32 can be just as for start_secondary onwards */
 	per_cpu(cpu_current_top_of_stack, cpu) = task_top_of_stack(idle);
-#else
-	initial_gs = per_cpu_offset(cpu);
 #endif
 	return 0;
 }
@@ -1115,9 +1123,16 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle,
 	unsigned long boot_error = 0;
 
 	idle->thread.sp = (unsigned long)task_pt_regs(idle);
-	early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu);
 	initial_code = (unsigned long)start_secondary;
-	initial_stack  = idle->thread.sp;
+
+	if (IS_ENABLED(CONFIG_X86_32)) {
+		early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu);
+		initial_stack  = idle->thread.sp;
+	} else if (do_parallel_bringup) {
+		smpboot_control = STARTUP_SECONDARY | STARTUP_PARALLEL;
+	} else {
+		smpboot_control = STARTUP_SECONDARY | apicid;
+	}
 
 	/* Enable the espfix hack for this CPU */
 	init_espfix_ap(cpu);
@@ -1516,6 +1531,15 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	smp_quirk_init_udelay();
 
 	speculative_store_bypass_ht_init();
+
+	/*
+	 * We can do 64-bit AP bringup in parallel if the CPU reports its
+	 * APIC ID in CPUID leaf 0x0B. Otherwise it's too hard. And not
+	 * for SEV-ES guests because they can't use CPUID that early.
+	 */
+	if (IS_ENABLED(CONFIG_X86_32) || boot_cpu_data.cpuid_level < 0x0B ||
+	    cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT))
+		do_parallel_bringup = false;
 }
 
 void arch_thaw_secondary_cpus_begin(void)
diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
index c5e29db02a46..21b9e8b55618 100644
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -154,6 +154,9 @@ static void __init setup_real_mode(void)
 
 	trampoline_header->flags = 0;
 
+	trampoline_lock = &trampoline_header->lock;
+	*trampoline_lock = 0;
+
 	trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd);
 
 	/* Map the real mode stub as virtual == physical */
diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S
index cc8391f86cdb..12a540904e80 100644
--- a/arch/x86/realmode/rm/trampoline_64.S
+++ b/arch/x86/realmode/rm/trampoline_64.S
@@ -49,6 +49,19 @@ SYM_CODE_START(trampoline_start)
 	mov	%ax, %es
 	mov	%ax, %ss
 
+	/*
+	 * Make sure only one CPU fiddles with the realmode stack
+	 */
+.Llock_rm:
+	btl	$0, tr_lock
+	jnc	2f
+	pause
+	jmp	.Llock_rm
+2:
+	lock
+	btsl	$0, tr_lock
+	jc	.Llock_rm
+
 	# Setup stack
 	movl	$rm_stack_end, %esp
 
@@ -192,6 +205,7 @@ SYM_DATA_START(trampoline_header)
 	SYM_DATA(tr_efer,		.space 8)
 	SYM_DATA(tr_cr4,		.space 4)
 	SYM_DATA(tr_flags,		.space 4)
+	SYM_DATA(tr_lock,		.space 4)
 SYM_DATA_END(trampoline_header)
 
 #include "trampoline_common.S"
diff --git a/kernel/smpboot.c b/kernel/smpboot.c
index f6bc0bc8a2aa..934e64ff4eed 100644
--- a/kernel/smpboot.c
+++ b/kernel/smpboot.c
@@ -25,7 +25,7 @@
  * For the hotplug case we keep the task structs around and reuse
  * them.
  */
-static DEFINE_PER_CPU(struct task_struct *, idle_threads);
+DEFINE_PER_CPU(struct task_struct *, idle_threads);
 
 struct task_struct *idle_thread_get(unsigned int cpu)
 {
-- 
2.33.1


[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 5965 bytes --]