From: Paolo Bonzini <pbonzini@redhat.com>
To: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
Li RongQing <lirongqing@baidu.com>
Subject: Re: [PATCH v2 01/23] KVM: x86: Purge "highest ISR" cache when updating APICv state
Date: Mon, 5 Sep 2022 23:58:13 +0200 [thread overview]
Message-ID: <38f5cb16-84d3-d50c-7a85-c4940f3ef319@redhat.com> (raw)
In-Reply-To: <20220903002254.2411750-2-seanjc@google.com>
On 9/3/22 02:22, Sean Christopherson wrote:
> Purge the "highest ISR" cache when updating APICv state on a vCPU. The
> cache must not be used when APICv is active as hardware may emulate EOIs
> (and other operations) without exiting to KVM.
>
> This fixes a bug where KVM will effectively block IRQs in perpetuity due
> to the "highest ISR" never getting reset if APICv is activated on a vCPU
> while an IRQ is in-service. Hardware emulates the EOI and KVM never gets
> a chance to update its cache.
>
> Fixes: b26a695a1d78 ("kvm: lapic: Introduce APICv update helper function")
> Cc: stable@vger.kernel.org
> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> Cc: Maxim Levitsky <mlevitsk@redhat.com>
> Signed-off-by: Sean Christopherson <seanjc@google.com>
> ---
> arch/x86/kvm/lapic.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> index 9dda989a1cf0..38e9b8e5278c 100644
> --- a/arch/x86/kvm/lapic.c
> +++ b/arch/x86/kvm/lapic.c
> @@ -2429,6 +2429,7 @@ void kvm_apic_update_apicv(struct kvm_vcpu *vcpu)
> */
> apic->isr_count = count_vectors(apic->regs + APIC_ISR);
> }
> + apic->highest_isr_cache = -1;
> }
> EXPORT_SYMBOL_GPL(kvm_apic_update_apicv);
>
> @@ -2485,7 +2486,6 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event)
> kvm_lapic_set_reg(apic, APIC_TMR + 0x10 * i, 0);
> }
> kvm_apic_update_apicv(vcpu);
> - apic->highest_isr_cache = -1;
> update_divide_count(apic);
> atomic_set(&apic->lapic_timer.pending, 0);
>
> @@ -2772,7 +2772,6 @@ int kvm_apic_set_state(struct kvm_vcpu *vcpu, struct kvm_lapic_state *s)
> __start_apic_timer(apic, APIC_TMCCT);
> kvm_lapic_set_reg(apic, APIC_TMCCT, 0);
> kvm_apic_update_apicv(vcpu);
> - apic->highest_isr_cache = -1;
> if (apic->apicv_active) {
> static_call_cond(kvm_x86_apicv_post_state_restore)(vcpu);
> static_call_cond(kvm_x86_hwapic_irr_update)(vcpu, apic_find_highest_irr(apic));
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
next prev parent reply other threads:[~2022-09-05 21:58 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-03 0:22 [PATCH v2 00/23] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 01/23] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2022-09-05 21:58 ` Paolo Bonzini [this message]
2022-09-03 0:22 ` [PATCH v2 02/23] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
2022-09-05 21:58 ` Paolo Bonzini
2022-09-03 0:22 ` [PATCH v2 03/23] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2022-09-05 21:59 ` Paolo Bonzini
2022-09-03 0:22 ` [PATCH v2 04/23] KVM: x86: Inhibit AVIC SPTEs if any vCPU enables x2APIC Sean Christopherson
2022-09-05 22:02 ` Paolo Bonzini
2022-09-13 19:52 ` Suthikulpanit, Suravee
2022-09-14 7:39 ` Sean Christopherson
2022-09-14 17:41 ` Suthikulpanit, Suravee
2022-09-16 17:47 ` Sean Christopherson
2022-09-16 19:10 ` Sean Christopherson
2022-09-20 13:07 ` Maxim Levitsky
2022-09-20 15:46 ` Sean Christopherson
2022-09-20 16:50 ` Sean Christopherson
2022-09-23 10:18 ` Maxim Levitsky
2022-09-23 10:19 ` Maxim Levitsky
2022-09-03 0:22 ` [PATCH v2 05/23] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 06/23] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 07/23] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 08/23] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 09/23] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 10/23] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 11/23] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 12/23] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 13/23] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2022-09-13 23:32 ` Suthikulpanit, Suravee
2022-09-14 7:42 ` Sean Christopherson
2022-09-15 2:11 ` Suthikulpanit, Suravee
2022-09-16 18:52 ` Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 14/23] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 15/23] KVM: x86: Explicitly skip adding vCPU to optimized logical map if LDR==0 Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 16/23] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 17/23] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 18/23] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 19/23] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 20/23] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 21/23] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 22/23] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2022-09-03 0:22 ` [PATCH v2 23/23] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=38f5cb16-84d3-d50c-7a85-c4940f3ef319@redhat.com \
--to=pbonzini@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lirongqing@baidu.com \
--cc=mlevitsk@redhat.com \
--cc=seanjc@google.com \
--cc=suravee.suthikulpanit@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).