kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Longpeng (Mike)" <longpeng2@huawei.com>
To: Mike Kravetz <mike.kravetz@oracle.com>,
	Sean Christopherson <sean.j.christopherson@intel.com>
Cc: <akpm@linux-foundation.org>, <linux-mm@kvack.org>,
	<linux-kernel@vger.kernel.org>, <arei.gonglei@huawei.com>,
	<weidong.huang@huawei.com>, <weifuqiang@huawei.com>,
	<kvm@vger.kernel.org>,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
	Matthew Wilcox <willy@infradead.org>
Subject: Re: [PATCH] mm/hugetlb: avoid get wrong ptep caused by race
Date: Thu, 20 Feb 2020 10:30:55 +0800	[thread overview]
Message-ID: <502b5e52-060b-6864-d1b7-eab2dc951aed@huawei.com> (raw)
In-Reply-To: <098a5dd6-e1da-f161-97d7-cfe735d14fd8@oracle.com>

在 2020/2/20 3:33, Mike Kravetz 写道:
> + Kirill
> On 2/18/20 5:58 PM, Sean Christopherson wrote:
>> On Wed, Feb 19, 2020 at 09:39:59AM +0800, Longpeng (Mike) wrote:
>>> 在 2020/2/19 4:37, Sean Christopherson 写道:
>>>> On Tue, Feb 18, 2020 at 08:10:25PM +0800, Longpeng(Mike) wrote:
>>>>> Our machine encountered a panic after run for a long time and
>>>>> the calltrace is:
>>>>
>>>> What's the actual panic?  Is it a BUG() in hugetlb_fault(), a bad pointer
>>>> dereference, etc...?
>>>>
>>> A bad pointer dereference.
>>>
>>> pgd -> pud -> user 1G hugepage
>>> huge_pte_offset() wants to return NULL or pud (point to the entry), but it maybe
>>> return the a bad pointer of the user 1G hugepage.
>>>
>>>>> RIP: 0010:[<ffffffff9dff0587>]  [<ffffffff9dff0587>] hugetlb_fault+0x307/0xbe0
>>>>> RSP: 0018:ffff9567fc27f808  EFLAGS: 00010286
>>>>> RAX: e800c03ff1258d48 RBX: ffffd3bb003b69c0 RCX: e800c03ff1258d48
>>>>> RDX: 17ff3fc00eda72b7 RSI: 00003ffffffff000 RDI: e800c03ff1258d48
>>>>> RBP: ffff9567fc27f8c8 R08: e800c03ff1258d48 R09: 0000000000000080
>>>>> R10: ffffaba0704c22a8 R11: 0000000000000001 R12: ffff95c87b4b60d8
>>>>> R13: 00005fff00000000 R14: 0000000000000000 R15: ffff9567face8074
>>>>> FS:  00007fe2d9ffb700(0000) GS:ffff956900e40000(0000) knlGS:0000000000000000
>>>>> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>> CR2: ffffd3bb003b69c0 CR3: 000000be67374000 CR4: 00000000003627e0
>>>>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>>>> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>>>>> Call Trace:
>>>>>  [<ffffffff9df9b71b>] ? unlock_page+0x2b/0x30
>>>>>  [<ffffffff9dff04a2>] ? hugetlb_fault+0x222/0xbe0
>>>>>  [<ffffffff9dff1405>] follow_hugetlb_page+0x175/0x540
>>>>>  [<ffffffff9e15b825>] ? cpumask_next_and+0x35/0x50
>>>>>  [<ffffffff9dfc7230>] __get_user_pages+0x2a0/0x7e0
>>>>>  [<ffffffff9dfc648d>] __get_user_pages_unlocked+0x15d/0x210
>>>>>  [<ffffffffc068cfc5>] __gfn_to_pfn_memslot+0x3c5/0x460 [kvm]
>>>>>  [<ffffffffc06b28be>] try_async_pf+0x6e/0x2a0 [kvm]
>>>>>  [<ffffffffc06b4b41>] tdp_page_fault+0x151/0x2d0 [kvm]
>>>>>  [<ffffffffc075731c>] ? vmx_vcpu_run+0x2ec/0xc80 [kvm_intel]
>>>>>  [<ffffffffc0757328>] ? vmx_vcpu_run+0x2f8/0xc80 [kvm_intel]
>>>>>  [<ffffffffc06abc11>] kvm_mmu_page_fault+0x31/0x140 [kvm]
>>>>>  [<ffffffffc074d1ae>] handle_ept_violation+0x9e/0x170 [kvm_intel]
>>>>>  [<ffffffffc075579c>] vmx_handle_exit+0x2bc/0xc70 [kvm_intel]
>>>>>  [<ffffffffc074f1a0>] ? __vmx_complete_interrupts.part.73+0x80/0xd0 [kvm_intel]
>>>>>  [<ffffffffc07574c0>] ? vmx_vcpu_run+0x490/0xc80 [kvm_intel]
>>>>>  [<ffffffffc069f3be>] vcpu_enter_guest+0x7be/0x13a0 [kvm]
>>>>>  [<ffffffffc06cf53e>] ? kvm_check_async_pf_completion+0x8e/0xb0 [kvm]
>>>>>  [<ffffffffc06a6f90>] kvm_arch_vcpu_ioctl_run+0x330/0x490 [kvm]
>>>>>  [<ffffffffc068d919>] kvm_vcpu_ioctl+0x309/0x6d0 [kvm]
>>>>>  [<ffffffff9deaa8c2>] ? dequeue_signal+0x32/0x180
>>>>>  [<ffffffff9deae34d>] ? do_sigtimedwait+0xcd/0x230
>>>>>  [<ffffffff9e03aed0>] do_vfs_ioctl+0x3f0/0x540
>>>>>  [<ffffffff9e03b0c1>] SyS_ioctl+0xa1/0xc0
>>>>>  [<ffffffff9e53879b>] system_call_fastpath+0x22/0x27
>>>>>
>>>>> ( The kernel we used is older, but we think the latest kernel also has this
>>>>>   bug after dig into this problem. )
>>>>>
>>>>> For 1G hugepages, huge_pte_offset() wants to return NULL or pudp, but it
>>>>> may return a wrong 'pmdp' if there is a race. Please look at the following
>>>>> code snippet:
>>>>>     ...
>>>>>     pud = pud_offset(p4d, addr);
>>>>>     if (sz != PUD_SIZE && pud_none(*pud))
>>>>>         return NULL;
>>>>>     /* hugepage or swap? */
>>>>>     if (pud_huge(*pud) || !pud_present(*pud))
>>>>>         return (pte_t *)pud;
>>>>>
>>>>>     pmd = pmd_offset(pud, addr);
>>>>>     if (sz != PMD_SIZE && pmd_none(*pmd))
>>>>>         return NULL;
>>>>>     /* hugepage or swap? */
>>>>>     if (pmd_huge(*pmd) || !pmd_present(*pmd))
>>>>>         return (pte_t *)pmd;
>>>>>     ...
>>>>>
>>>>> The following sequence would trigger this bug:
>>>>> 1. CPU0: sz = PUD_SIZE and *pud = 0 , continue
>>>>> 1. CPU0: "pud_huge(*pud)" is false
>>>>> 2. CPU1: calling hugetlb_no_page and set *pud to xxxx8e7(PRESENT)
>>>>> 3. CPU0: "!pud_present(*pud)" is false, continue
>>>>> 4. CPU0: pmd = pmd_offset(pud, addr) and maybe return a wrong pmdp
>>>>> However, we want CPU0 to return NULL or pudp.
>>>>>
>>>>> We can avoid this race by read the pud only once.
>>>>
>>>> Are there any other options for avoiding the panic you hit?  I ask because
>>>> there are a variety of flows that use a very similar code pattern, e.g.
>>>> lookup_address_in_pgd(), and using READ_ONCE() in huge_pte_offset() but not
>>>> other flows could be confusing (or in my case, anxiety inducing[*]).  At
>>>> the least, adding a comment in huge_pte_offset() to explain the need for
>>>> READ_ONCE() would be helpful.
>>>>
>>> I hope the hugetlb and mm maintainers could give some other options if they
>>> approve this bug.
>>
>> The race and the fix make sense.  I assumed dereferencing garbage from the
>> huge page was the issue, but I wasn't 100% that was the case, which is why
>> I asked about alternative fixes.
>>
>>> We change the code from
>>> 	if (pud_huge(*pud) || !pud_present(*pud))
>>> to
>>> 	if (pud_huge(*pud)
>>> 		return (pte_t *)pud;
>>> 	busy loop for 500ms
>>> 	if (!pud_present(*pud))
>>> 		return (pte_t *)pud;
>>> and the panic will be hit quickly.
>>>
>>> ARM64 has already use READ/WRITE_ONCE to access the pagetable, look at this
>>> commit 20a004e7 (arm64: mm: Use READ_ONCE/WRITE_ONCE when accessing page tables).
>>>
>>> The root cause is: 'if (pud_huge(*pud) || !pud_present(*pud))' read entry from
>>> pud twice and the *pud maybe change in a race, so if we only read the pud once.
>>> I use READ_ONCE here is just for safe, to prevents the complier mischief if
>>> possible.
>>
>> FWIW, I'd be in favor of going the READ/WRITE_ONCE() route for x86, e.g.
>> convert everything as a follow-up patch (or patches).  I'm fairly confident
>> that KVM's usage of lookup_address_in_mm() is safe, but I wouldn't exactly
>> bet my life on it.  I'd much rather the failing scenario be that KVM uses
>> a sub-optimal page size as opposed to exploding on a bad pointer.
> 
> Longpeng(Mike) asked in another e-mail specifically about making similar
> changes to lookup_address_in_mm().  Replying here as there is more context.
> 
> I 'think' lookup_address_in_mm is safe from this issue.  Why?  IIUC, the
> problem with the huge_pte_offset routine is that the pud changes from
> pud_none() to pud_huge() in the middle of
> 'if (pud_huge(*pud) || !pud_present(*pud))'.  In the case of
> lookup_address_in_mm, we know pud was not pud_none() as it was previously
> checked.  I am not aware of any other state transitions which could cause
> us trouble.  However, I am no expert in this area.
> 
So... I need just fix huge_pte_offset in mm/hugetlb.c, right?

Is it possible the pud changes from pud_huge() to pud_none() while another CPU
is walking the pagetable ?

-- 
Regards,
Longpeng(Mike)


  reply	other threads:[~2020-02-20  2:31 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-18 12:10 [PATCH] mm/hugetlb: avoid get wrong ptep caused by race Longpeng(Mike)
2020-02-18 20:37 ` Sean Christopherson
2020-02-19  0:51   ` Mike Kravetz
2020-02-19  1:39   ` Longpeng (Mike)
2020-02-19  1:58     ` Sean Christopherson
2020-02-19 12:21       ` Longpeng (Mike)
2020-02-19 16:22         ` Sean Christopherson
2020-02-20  2:32           ` Longpeng (Mike)
2020-02-19 19:33       ` Mike Kravetz
2020-02-20  2:30         ` Longpeng (Mike) [this message]
2020-02-21  0:22           ` Mike Kravetz
2020-02-22  2:15             ` Longpeng (Mike)
2020-02-18 20:52 ` Matthew Wilcox
2020-02-19  2:09   ` Longpeng (Mike)
2020-02-19  3:49     ` Mike Kravetz
2020-02-19 12:52       ` Longpeng (Mike)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=502b5e52-060b-6864-d1b7-eab2dc951aed@huawei.com \
    --to=longpeng2@huawei.com \
    --cc=akpm@linux-foundation.org \
    --cc=arei.gonglei@huawei.com \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mike.kravetz@oracle.com \
    --cc=sean.j.christopherson@intel.com \
    --cc=weidong.huang@huawei.com \
    --cc=weifuqiang@huawei.com \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).