[PATCH AUTOSEL 5.2 69/76] KVM: arm/arm64: Only skip MMIO insn once

[PATCH AUTOSEL 5.2 69/76] KVM: arm/arm64: Only skip MMIO insn once

[Sasha Levin]

From: Andrew Jones <drjones@redhat.com>

[ Upstream commit 2113c5f62b7423e4a72b890bd479704aa85c81ba ]

If after an MMIO exit to userspace a VCPU is immediately run with an
immediate_exit request, such as when a signal is delivered or an MMIO
emulation completion is needed, then the VCPU completes the MMIO
emulation and immediately returns to userspace. As the exit_reason
does not get changed from KVM_EXIT_MMIO in these cases we have to
be careful not to complete the MMIO emulation again, when the VCPU is
eventually run again, because the emulation does an instruction skip
(and doing too many skips would be a waste of guest code :-) We need
to use additional VCPU state to track if the emulation is complete.
As luck would have it, we already have 'mmio_needed', which even
appears to be used in this way by other architectures already.

Fixes: 0d640732dbeb ("arm64: KVM: Skip MMIO insn after emulation")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 virt/kvm/arm/mmio.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/virt/kvm/arm/mmio.c b/virt/kvm/arm/mmio.c
index a8a6a0c883f1b..6af5c91337f25 100644
--- a/virt/kvm/arm/mmio.c
+++ b/virt/kvm/arm/mmio.c
@@ -86,6 +86,12 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	unsigned int len;
 	int mask;
 
+	/* Detect an already handled MMIO return */
+	if (unlikely(!vcpu->mmio_needed))
+		return 0;
+
+	vcpu->mmio_needed = 0;
+
 	if (!run->mmio.is_write) {
 		len = run->mmio.len;
 		if (len > sizeof(unsigned long))
@@ -188,6 +194,7 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
 	run->mmio.is_write	= is_write;
 	run->mmio.phys_addr	= fault_ipa;
 	run->mmio.len		= len;
+	vcpu->mmio_needed	= 1;
 
 	if (!ret) {
 		/* We handled the access successfully in the kernel. */
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

[PATCH AUTOSEL 5.2 76/76] KVM: arm/arm64: VGIC: Properly initialise private IRQ affinity

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 2e16f3e926ed48373c98edea85c6ad0ef69425d1 ]

At the moment we initialise the target *mask* of a virtual IRQ to the
VCPU it belongs to, even though this mask is only defined for GICv2 and
quickly runs out of bits for many GICv3 guests.
This behaviour triggers an UBSAN complaint for more than 32 VCPUs:
------
[ 5659.462377] UBSAN: Undefined behaviour in virt/kvm/arm/vgic/vgic-init.c:223:21
[ 5659.471689] shift exponent 32 is too large for 32-bit type 'unsigned int'
------
Also for GICv3 guests the reporting of TARGET in the "vgic-state" debugfs
dump is wrong, due to this very same problem.

Because there is no requirement to create the VGIC device before the
VCPUs (and QEMU actually does it the other way round), we can't safely
initialise mpidr or targets in kvm_vgic_vcpu_init(). But since we touch
every private IRQ for each VCPU anyway later (in vgic_init()), we can
just move the initialisation of those fields into there, where we
definitely know the VGIC type.

On the way make sure we really have either a VGICv2 or a VGICv3 device,
since the existing code is just checking for "VGICv3 or not", silently
ignoring the uninitialised case.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Dave Martin <dave.martin@arm.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 virt/kvm/arm/vgic/vgic-init.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c
index bdbc297d06fb4..e621b5d45b278 100644
--- a/virt/kvm/arm/vgic/vgic-init.c
+++ b/virt/kvm/arm/vgic/vgic-init.c
@@ -8,6 +8,7 @@
 #include <linux/cpu.h>
 #include <linux/kvm_host.h>
 #include <kvm/arm_vgic.h>
+#include <asm/kvm_emulate.h>
 #include <asm/kvm_mmu.h>
 #include "vgic.h"
 
@@ -164,12 +165,18 @@ static int kvm_vgic_dist_init(struct kvm *kvm, unsigned int nr_spis)
 		irq->vcpu = NULL;
 		irq->target_vcpu = vcpu0;
 		kref_init(&irq->refcount);
-		if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2) {
+		switch (dist->vgic_model) {
+		case KVM_DEV_TYPE_ARM_VGIC_V2:
 			irq->targets = 0;
 			irq->group = 0;
-		} else {
+			break;
+		case KVM_DEV_TYPE_ARM_VGIC_V3:
 			irq->mpidr = 0;
 			irq->group = 1;
+			break;
+		default:
+			kfree(dist->spis);
+			return -EINVAL;
 		}
 	}
 	return 0;
@@ -209,7 +216,6 @@ int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu)
 		irq->intid = i;
 		irq->vcpu = NULL;
 		irq->target_vcpu = vcpu;
-		irq->targets = 1U << vcpu->vcpu_id;
 		kref_init(&irq->refcount);
 		if (vgic_irq_is_sgi(i)) {
 			/* SGIs */
@@ -219,11 +225,6 @@ int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu)
 			/* PPIs */
 			irq->config = VGIC_CONFIG_LEVEL;
 		}
-
-		if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3)
-			irq->group = 1;
-		else
-			irq->group = 0;
 	}
 
 	if (!irqchip_in_kernel(vcpu->kvm))
@@ -286,10 +287,19 @@ int vgic_init(struct kvm *kvm)
 
 		for (i = 0; i < VGIC_NR_PRIVATE_IRQS; i++) {
 			struct vgic_irq *irq = &vgic_cpu->private_irqs[i];
-			if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3)
+			switch (dist->vgic_model) {
+			case KVM_DEV_TYPE_ARM_VGIC_V3:
 				irq->group = 1;
-			else
+				irq->mpidr = kvm_vcpu_get_mpidr_aff(vcpu);
+				break;
+			case KVM_DEV_TYPE_ARM_VGIC_V2:
 				irq->group = 0;
+				irq->targets = 1U << idx;
+				break;
+			default:
+				ret = -EINVAL;
+				goto out;
+			}
 		}
 	}
 
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm