KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
* [RESEND PATCH] drivers: arm arch timer: Correct fault programming of CNTKCTL_EL1.EVNTI
@ 2020-07-17  9:21 Keqian Zhu
  2020-07-28  7:39 ` zhukeqian
  2020-07-28 10:16 ` Marc Zyngier
  0 siblings, 2 replies; 4+ messages in thread
From: Keqian Zhu @ 2020-07-17  9:21 UTC (permalink / raw)
  To: linux-kernel, linux-arm-kernel, kvmarm, kvm
  Cc: Marc Zyngier, Catalin Marinas, Will Deacon

ARM virtual counter supports event stream. It can only trigger an event
when the trigger bit of CNTVCT_EL0 changes from 0 to 1 (or from 1 to 0),
so the actual period of event stream is 2 ^ (cntkctl_evnti + 1). For
example, when the trigger bit is 0, then it triggers an event for every
two cycles.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
---
 drivers/clocksource/arm_arch_timer.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index ecf7b7db2d05..06d99a4b1b9b 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -799,10 +799,20 @@ static void __arch_timer_setup(unsigned type,
 static void arch_timer_evtstrm_enable(int divider)
 {
 	u32 cntkctl = arch_timer_get_cntkctl();
+	int cntkctl_evnti;
+
+	/*
+	 * Note that it can only trigger an event when the trigger bit
+	 * of CNTVCT_EL0 changes from 1 to 0 (or from 0 to 1), so the
+	 * actual period of event stream is 2 ^ (cntkctl_evnti + 1).
+	 */
+	cntkctl_evnti = divider - 1;
+	cntkctl_evnti = min(cntkctl_evnti, 15);
+	cntkctl_evnti = max(cntkctl_evnti, 0);
 
 	cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
 	/* Set the divider and enable virtual event stream */
-	cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
+	cntkctl |= (cntkctl_evnti << ARCH_TIMER_EVT_TRIGGER_SHIFT)
 			| ARCH_TIMER_VIRT_EVT_EN;
 	arch_timer_set_cntkctl(cntkctl);
 	arch_timer_set_evtstrm_feature();
@@ -816,10 +826,11 @@ static void arch_timer_configure_evtstream(void)
 	/* Find the closest power of two to the divisor */
 	evt_stream_div = arch_timer_rate / ARCH_TIMER_EVT_STREAM_FREQ;
 	pos = fls(evt_stream_div);
-	if (pos > 1 && !(evt_stream_div & (1 << (pos - 2))))
+	if ((pos == 1) || (pos > 1 && !(evt_stream_div & (1 << (pos - 2)))))
 		pos--;
+
 	/* enable event stream */
-	arch_timer_evtstrm_enable(min(pos, 15));
+	arch_timer_evtstrm_enable(pos);
 }
 
 static void arch_counter_set_user_access(void)
-- 
2.19.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-17  9:21 [RESEND PATCH] drivers: arm arch timer: Correct fault programming of CNTKCTL_EL1.EVNTI Keqian Zhu
2020-07-28  7:39 ` zhukeqian
2020-07-28 10:16 ` Marc Zyngier
2020-07-28 11:59   ` zhukeqian

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
		kvmarm@lists.cs.columbia.edu
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/edu.columbia.cs.lists.kvmarm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git