KVM ARM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v13 0/9] Enable ptp_kvm for arm64
@ 2020-06-19 13:01 Jianyong Wu
  2020-06-19 13:01 ` [PATCH v13 1/9] arm64: Probe for the presence of KVM hypervisor services during boot Jianyong Wu
                   ` (8 more replies)
  0 siblings, 9 replies; 16+ messages in thread
From: Jianyong Wu @ 2020-06-19 13:01 UTC (permalink / raw)
  To: netdev, yangbo.lu, john.stultz, tglx, pbonzini,
	sean.j.christopherson, maz, richardcochran, Mark.Rutland, will,
	suzuki.poulose, steven.price
  Cc: justin.he, Wei.Chen, kvm, linux-kernel, nd, kvmarm, linux-arm-kernel

Currently, we offen use ntp (sync time with remote network clock)
to sync time in VM. But the precision of ntp is subject to network delay
so it's difficult to sync time in a high precision.

kvm virtual ptp clock (ptp_kvm) offers another way to sync time in VM,
as the remote clock locates in the host instead of remote network clock.
It targets to sync time between guest and host in virtualization
environment and in this way, we can keep the time of all the VMs running
in the same host in sync. In general, the delay of communication between
host and guest is quiet small, so ptp_kvm can offer time sync precision
up to in order of nanosecond. Please keep in mind that ptp_kvm just
limits itself to be a channel which transmit the remote clock from
host to guest and leaves the time sync jobs to an application, eg. chrony,
in usersapce in VM.

How ptp_kvm works:
After ptp_kvm initialized, there will be a new device node under
/dev called ptp%d. A guest userspace service, like chrony, can use this
device to get host walltime, sometimes also counter cycle, which depends
on the service it calls. Then this guest userspace service can use those
data to do the time sync for guest.
here is a rough sketch to show how kvm ptp clock works.

|----------------------------|              |--------------------------|
|       guest userspace      |              |          host            |
|ioctl -> /dev/ptp%d         |              |                          |
|       ^   |                |              |                          |
|----------------------------|              |                          |
|       |   | guest kernel   |              |                          |
|       |   V      (get host walltime/counter cycle)                   |
|      ptp_kvm -> hypercall - - - - - - - - - - ->hypercall service    |
|                         <- - - - - - - - - - - -                     |
|----------------------------|              |--------------------------|

1. time sync service in guest userspace call ptp device through /dev/ptp%d.
2. ptp_kvm module in guest recive this request then invoke hypercall to
route into host kernel to request host walltime/counter cycle.
3. ptp_kvm hypercall service in host response to the request and send data
4. ptp (not ptp_kvm) in guest copy the data to userspace.

This ptp_kvm implementation focuses itself to step 2 and 3 and step 2 works
in guest comparing step 3 works in host kernel.

change log:
from v12 to v13:
        (1) rebase code on 5.8-rc1.
        (2) this patch set base on 2 patches of 1/8 and 2/8 from Will Decon.
        (3) remove the change to ptp device code of extend getcrosststamp.
        (4) remove the mechanism of letting user choose the counter type in
ptp_kvm for arm64.
        (5) add virtual counter option in ptp_kvm service to let user choose
the specific counter explicitly.

from v11 to v12:
        (1) rebase code on 5.7-rc6 and rebase 2 patches from Will Decon
including 1/11 and 2/11. as these patches introduce discover mechanism of
vendor smccc service.
        (2) rebase ptp_kvm hypercall service from standard smccc to vendor
smccc and add ptp_kvm to vendor smccc service discover mechanism.
        (3) add detail of why we need ptp_kvm and how ptp_kvm works in cover

from v10 to v11:
        (1) rebase code on 5.7-rc2.
        (2) remove support for arm32, as kvm support for arm32 will be
removed [1]
        (3) add error report in ptp_kvm initialization.

from v9 to v10:
        (1) change code base to v5.5.
        (2) enable ptp_kvm both for arm32 and arm64.
        (3) let user choose which of virtual counter or physical counter
should return when using crosstimestamp mode of ptp_kvm for arm/arm64.
        (4) extend input argument for getcrosstimestamp API.

from v8 to v9:
        (1) move ptp_kvm.h to driver/ptp/
        (2) replace license declaration of ptp_kvm.h the same with other
header files in the same directory.

from v7 to v8:
        (1) separate adding clocksource id for arm_arch_counter as a
single patch.
        (2) update commit message for patch 4/8.
        (3) refine patch 7/8 and patch 8/8 to make them more independent.

from v6 to v7:
        (1) include the omitted clocksource_id.h in last version.
        (2) reorder the header file in patch.
        (3) refine some words in commit message to make it more impersonal.

from v5 to v6:
        (1) apply Mark's patch[4] to get SMCCC conduit.
        (2) add mechanism to recognize current clocksource by add
clocksouce_id value into struct clocksource instead of method in patch-v5.
        (3) rename kvm_arch_ptp_get_clock_fn into

from v3 to v4:
        (1) fix clocksource of ptp_kvm to arch_sys_counter.
        (2) move kvm_arch_ptp_get_clock_fn into arm_arch_timer.c
        (3) subtract cntvoff before return cycles from host.
        (4) use ktime_get_snapshot instead of getnstimeofday and
get_current_counterval to return time and counter value.
        (5) split ktime and counter into two 32-bit block respectively
to avoid Y2038-safe issue.
        (6) set time compensation to device time as half of the delay of
hvc call.
        (7) add ARM_ARCH_TIMER as dependency of ptp_kvm for

from v2 to v3:
        (1) fix some issues in commit log.
        (2) add some receivers in send list.

from v1 to v2:
        (1) move arch-specific code from arch/ to driver/ptp/
        (2) offer mechanism to inform userspace if ptp_kvm service is
        (3) separate ptp_kvm code for arm64 into hypervisor part and
guest part.
        (4) add API to expose monotonic clock and counter value.
        (5) refine code: remove no necessary part and reconsitution.

[1] https://patchwork.kernel.org/cover/11373351/

Jianyong Wu (7):
  arm/arm64: KVM: Advertise KVM UID to guests via SMCCC
  smccc: export smccc conduit get helper.
  ptp: Reorganize ptp_kvm modules to make it arch-independent.
  clocksource: Add clocksource id for arm arch counter
  arm64/kvm: Add hypercall service for kvm ptp.
  ptp: arm64: Enable ptp_kvm for arm64
  arm64: Add kvm capability check extension for ptp_kvm

Thomas Gleixner (1):
  time: Add mechanism to recognize clocksource in time_get_snapshot

Will Deacon (1):
  arm64: Probe for the presence of KVM hypervisor services during boot

 arch/arm64/include/asm/hypervisor.h         | 11 +++
 arch/arm64/kernel/setup.c                   | 36 +++++++++
 arch/arm64/kvm/arm.c                        |  4 +
 arch/arm64/kvm/hypercalls.c                 | 79 +++++++++++++++---
 drivers/clocksource/arm_arch_timer.c        | 26 ++++++
 drivers/firmware/smccc/smccc.c              |  1 +
 drivers/ptp/Kconfig                         |  2 +-
 drivers/ptp/Makefile                        |  1 +
 drivers/ptp/ptp_kvm.h                       | 11 +++
 drivers/ptp/ptp_kvm_arm64.c                 | 53 ++++++++++++
 drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} | 80 +++++-------------
 drivers/ptp/ptp_kvm_x86.c                   | 89 +++++++++++++++++++++
 include/linux/arm-smccc.h                   | 56 +++++++++++++
 include/linux/clocksource.h                 |  6 ++
 include/linux/clocksource_ids.h             | 12 +++
 include/linux/timekeeping.h                 | 12 +--
 include/uapi/linux/kvm.h                    |  1 +
 kernel/time/clocksource.c                   |  3 +
 kernel/time/timekeeping.c                   |  1 +
 virt/kvm/Kconfig                            |  4 +
 20 files changed, 413 insertions(+), 75 deletions(-)
 create mode 100644 drivers/ptp/ptp_kvm.h
 create mode 100644 drivers/ptp/ptp_kvm_arm64.c
 rename drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} (63%)
 create mode 100644 drivers/ptp/ptp_kvm_x86.c
 create mode 100644 include/linux/clocksource_ids.h


kvmarm mailing list

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, back to index

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-19 13:01 [PATCH v13 0/9] Enable ptp_kvm for arm64 Jianyong Wu
2020-06-19 13:01 ` [PATCH v13 1/9] arm64: Probe for the presence of KVM hypervisor services during boot Jianyong Wu
2020-06-19 13:01 ` [PATCH v13 2/9] arm/arm64: KVM: Advertise KVM UID to guests via SMCCC Jianyong Wu
2020-07-27  3:45   ` Jianyong Wu
2020-07-27 11:38     ` Will Deacon
2020-07-28  1:07       ` Jianyong Wu
2020-08-20  9:43         ` Will Deacon
2020-06-19 13:01 ` [PATCH v13 3/9] smccc: Export smccc conduit get helper Jianyong Wu
2020-06-19 13:57   ` Christoph Hellwig
2020-06-22  1:29     ` Jianyong Wu
2020-06-19 13:01 ` [PATCH v13 4/9] ptp: Reorganize ptp_kvm module to make it arch-independent Jianyong Wu
2020-06-19 13:01 ` [PATCH v13 5/9] time: Add mechanism to recognize clocksource in time_get_snapshot Jianyong Wu
2020-06-19 13:01 ` [PATCH v13 6/9] clocksource: Add clocksource id for arm arch counter Jianyong Wu
2020-06-19 13:01 ` [PATCH v13 7/9] arm64/kvm: Add hypercall service for kvm ptp Jianyong Wu
2020-06-19 13:01 ` [PATCH v13 8/9] ptp: arm64: Enable ptp_kvm for arm64 Jianyong Wu
2020-06-19 13:01 ` [PATCH v13 9/9] arm64: Add kvm capability check extension for ptp_kvm Jianyong Wu

KVM ARM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/kvmarm/0 kvmarm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 kvmarm kvmarm/ https://lore.kernel.org/kvmarm \
	public-inbox-index kvmarm

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/public-inbox.git