[PATCH AUTOSEL 6.2 5/7] ACPI: x86: Drop quirk for HP Elitebook

[PATCH AUTOSEL 6.2 5/7] ACPI: x86: Drop quirk for HP Elitebook

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit e32d546c483a2a0f607687f5b521c2a2f942ffbe ]

There was a quirk in `acpi/x86/s2idle.c` for an HP Elitebook G9
platforms to force AMD GUID codepath instead of Microsoft codepath.

This was due to a bug with WCN6855 WLAN firmware interaction with
the system.

This bug is fixed by WCN6855 firmware:
WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Remove the quirk as it's no longer necessary with this firmware.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=c7a57ef688f7d99d8338a5d8edddc8836ff0e6de
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/x86/s2idle.c | 24 ------------------------
 1 file changed, 24 deletions(-)

diff --git a/drivers/acpi/x86/s2idle.c b/drivers/acpi/x86/s2idle.c
index c7afce465a071..e499c60c45791 100644
--- a/drivers/acpi/x86/s2idle.c
+++ b/drivers/acpi/x86/s2idle.c
@@ -384,29 +384,6 @@ static const struct acpi_device_id amd_hid_ids[] = {
 	{}
 };
 
-static int lps0_prefer_amd(const struct dmi_system_id *id)
-{
-	pr_debug("Using AMD GUID w/ _REV 2.\n");
-	rev_id = 2;
-	return 0;
-}
-static const struct dmi_system_id s2idle_dmi_table[] __initconst = {
-	{
-		/*
-		 * AMD Rembrandt based HP EliteBook 835/845/865 G9
-		 * Contains specialized AML in AMD/_REV 2 path to avoid
-		 * triggering a bug in Qualcomm WLAN firmware. This may be
-		 * removed in the future if that firmware is fixed.
-		 */
-		.callback = lps0_prefer_amd,
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "HP"),
-			DMI_MATCH(DMI_BOARD_NAME, "8990"),
-		},
-	},
-	{}
-};
-
 static int lps0_device_attach(struct acpi_device *adev,
 			      const struct acpi_device_id *not_used)
 {
@@ -586,7 +563,6 @@ static const struct platform_s2idle_ops acpi_s2idle_ops_lps0 = {
 
 void __init acpi_s2idle_setup(void)
 {
-	dmi_check_system(s2idle_dmi_table);
 	acpi_scan_add_handler(&lps0_handler);
 	s2idle_set_ops(&acpi_s2idle_ops_lps0);
 }
-- 
2.39.2

[PATCH AUTOSEL 6.2 6/7] ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit e2a56364485e7789e7b8f342637c7f3a219f7ede ]

commit 018d6711c26e4 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.

It was reported that several more Dell systems suffered the same symptoms.
As the list is continuing to grow but these are all Cezanne systems,
instead add Cezanne to the CPU list to apply the StorageD3Enable property
and remove the whole list.

It was also reported that an HP system only has StorageD3Enable on the ACPI
device for the first NVME disk, not the second.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217003
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216773
Reported-by: David Alvarez Lombardi <dqalombardi@proton.me>
Reported-by: dbilios@stdio.gr
Reported-and-tested-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Tested-by: victor.bonnelle@proton.me
Tested-by: hurricanepootis@protonmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/x86/utils.c | 37 +++++++++++++------------------------
 1 file changed, 13 insertions(+), 24 deletions(-)

diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index 4e816bb402f68..e45285d4e62a4 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -200,39 +200,28 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s
  * a hardcoded allowlist for D3 support, which was used for these platforms.
  *
  * This allows quirking on Linux in a similar fashion.
+ *
+ * Cezanne systems shouldn't *normally* need this as the BIOS includes
+ * StorageD3Enable.  But for two reasons we have added it.
+ * 1) The BIOS on a number of Dell systems have ambiguity
+ *    between the same value used for _ADR on ACPI nodes GPP1.DEV0 and GPP1.NVME.
+ *    GPP1.NVME is needed to get StorageD3Enable node set properly.
+ *    https://bugzilla.kernel.org/show_bug.cgi?id=216440
+ *    https://bugzilla.kernel.org/show_bug.cgi?id=216773
+ *    https://bugzilla.kernel.org/show_bug.cgi?id=217003
+ * 2) On at least one HP system StorageD3Enable is missing on the second NVME
+      disk in the system.
  */
 static const struct x86_cpu_id storage_d3_cpu_ids[] = {
 	X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 96, NULL),	/* Renoir */
 	X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 104, NULL),	/* Lucienne */
-	{}
-};
-
-static const struct dmi_system_id force_storage_d3_dmi[] = {
-	{
-		/*
-		 * _ADR is ambiguous between GPP1.DEV0 and GPP1.NVME
-		 * but .NVME is needed to get StorageD3Enable node
-		 * https://bugzilla.kernel.org/show_bug.cgi?id=216440
-		 */
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 14 7425 2-in-1"),
-		}
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 16 5625"),
-		}
-	},
+	X86_MATCH_VENDOR_FAM_MODEL(AMD, 25, 80, NULL),	/* Cezanne */
 	{}
 };
 
 bool force_storage_d3(void)
 {
-	const struct dmi_system_id *dmi_id = dmi_first_match(force_storage_d3_dmi);
-
-	return dmi_id || x86_match_cpu(storage_d3_cpu_ids);
+	return x86_match_cpu(storage_d3_cpu_ids);
 }
 
 /*
-- 
2.39.2