Linux-ACPI Archive on lore.kernel.org
 help / color / Atom feed
From: "Kaneda, Erik" <erik.kaneda@intel.com>
To: Hans de Goede <hdegoede@redhat.com>,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>,
	Len Brown <lenb@kernel.org>,
	"Moore, Robert" <robert.moore@intel.com>
Cc: "linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>,
	"devel@acpica.org" <devel@acpica.org>
Subject: RE: [PATCH] ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions
Date: Mon, 26 Oct 2020 20:55:57 +0000
Message-ID: <MWHPR11MB159947FE046515CE985CA571F0190@MWHPR11MB1599.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20201025094542.3669-1-hdegoede@redhat.com>



> -----Original Message-----
> From: Hans de Goede <hdegoede@redhat.com>
> Sent: Sunday, October 25, 2020 2:46 AM
> To: Rafael J . Wysocki <rjw@rjwysocki.net>; Len Brown <lenb@kernel.org>;
> Moore, Robert <robert.moore@intel.com>; Kaneda, Erik
> <erik.kaneda@intel.com>
> Cc: Hans de Goede <hdegoede@redhat.com>; linux-acpi@vger.kernel.org;
> devel@acpica.org
> Subject: [PATCH] ACPICA: Also handle "orphan" _REG methods for GPIO
> OpRegions
> 
> Before this commit acpi_ev_execute_reg_methods() had special handling
> to handle "orphan" (no matching OpRegion declared) _REG methods for EC
> nodes.
> 
> On Intel Cherry Trail devices there are 2 possible ACPI OpRegions for
> accessing GPIOs. The standard GeneralPurposeIo OpRegion and the Cherry
> Trail specific UserDefined 0x9X OpRegions.
> 
> Having 2 different types of OpRegions leads to potential issues with
> checks for OpRegion availability, or in other words checks if _REG has
> been called for the OpRegion which the ACPI code wants to use.
> 
> Except for the "orphan" EC handling, ACPICA core does not call _REG on
> an ACPI node which does not define an OpRegion matching the type being
> registered; and the reference design DSDT, from which most Cherry Trail
> DSDTs are derived, does not define GeneralPurposeIo, nor
> UserDefined(0x93)
> OpRegions for the GPO2 (UID 3) device, because no pins were assigned ACPI
> controlled functions in the reference design.
> 
> Together this leads to the perfect storm, at least on the Cherry Trail
> based Medion Akayo E1239T. This design does use a GPO2 pin from its ACPI
> code and has added the Cherry Trail specific UserDefined(0x93) opregion
> to its GPO2 ACPI node to access this pin.
> 
> But it uses a has _REG been called availability check for the standard
> GeneralPurposeIo OpRegion. This clearly is a bug in the DSDT, but this
> does work under Windows. This issue leads to the intel_vbtn driver
> reporting the device always being in tablet-mode at boot, even if it
> is in laptop mode. Which in turn causes userspace to ignore touchpad
> events. So iow this issues causes the touchpad to not work at boot.
> 
> This commit fixes this by extending the "orphan" _REG method handling
> to also apply to GPIO address-space handlers.
> 
> Note it seems that Windows always calls "orphan" _REG methods so me
> may want to consider dropping the space-id check and always do
> "orphan" _REG method handling.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  drivers/acpi/acpica/evregion.c | 54 +++++++++++++++++-----------------
>  1 file changed, 27 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c
> index 738d4b231f34..21ff341e34a4 100644
> --- a/drivers/acpi/acpica/evregion.c
> +++ b/drivers/acpi/acpica/evregion.c
> @@ -21,7 +21,8 @@ extern u8 acpi_gbl_default_address_spaces[];
>  /* Local prototypes */
> 
>  static void
> -acpi_ev_orphan_ec_reg_method(struct acpi_namespace_node
> *ec_device_node);
> +acpi_ev_execute_orphan_reg_method(struct acpi_namespace_node
> *device_node,
> +				  acpi_adr_space_type space_id);
> 
>  static acpi_status
>  acpi_ev_reg_run(acpi_handle obj_handle,
> @@ -684,10 +685,12 @@ acpi_ev_execute_reg_methods(struct
> acpi_namespace_node *node,
>  				     ACPI_NS_WALK_UNLOCK,
> acpi_ev_reg_run, NULL,
>  				     &info, NULL);
> 
> -	/* Special case for EC: handle "orphan" _REG methods with no region
> */
> -
> -	if (space_id == ACPI_ADR_SPACE_EC) {
> -		acpi_ev_orphan_ec_reg_method(node);
> +	/*
> +	 * Special case for EC and GPIO: handle "orphan" _REG methods with
> +	 * no region.
> +	 */
> +	if (space_id == ACPI_ADR_SPACE_EC || space_id ==
> ACPI_ADR_SPACE_GPIO) {
> +		acpi_ev_execute_orphan_reg_method(node, space_id);
>  	}
> 
>  	ACPI_DEBUG_PRINT_RAW((ACPI_DB_NAMES,
> @@ -760,31 +763,28 @@ acpi_ev_reg_run(acpi_handle obj_handle,
> 
> 
> /**********************************************************
> *********************
>   *
> - * FUNCTION:    acpi_ev_orphan_ec_reg_method
> + * FUNCTION:    acpi_ev_execute_orphan_reg_method
>   *
> - * PARAMETERS:  ec_device_node      - Namespace node for an EC device
> + * PARAMETERS:  device_node     - Namespace node for an ACPI device
> + *              space_id        - The address space ID
>   *
>   * RETURN:      None
>   *
> - * DESCRIPTION: Execute an "orphan" _REG method that appears under the
> EC
> + * DESCRIPTION: Execute an "orphan" _REG method that appears under an
> ACPI
>   *              device. This is a _REG method that has no corresponding region
> - *              within the EC device scope. The orphan _REG method appears to
> - *              have been enabled by the description of the ECDT in the ACPI
> - *              specification: "The availability of the region space can be
> - *              detected by providing a _REG method object underneath the
> - *              Embedded Controller device."
> - *
> - *              To quickly access the EC device, we use the ec_device_node used
> - *              during EC handler installation. Otherwise, we would need to
> - *              perform a time consuming namespace walk, executing _HID
> - *              methods to find the EC device.
> + *              within the device's scope. ACPI tables depending on these
> + *              "orphan" _REG methods have been seen for both EC and GPIO
> + *              Operation Regions. Presumably the Windows ACPI implementation
> + *              always calls the _REG method independent of the presence of
> + *              an actual Operation Region with the correct address space ID.
>   *
>   *  MUTEX:      Assumes the namespace is locked
>   *
> 
> **********************************************************
> ********************/
> 
>  static void
> -acpi_ev_orphan_ec_reg_method(struct acpi_namespace_node
> *ec_device_node)
> +acpi_ev_execute_orphan_reg_method(struct acpi_namespace_node
> *device_node,
> +				  acpi_adr_space_type space_id)
>  {
>  	acpi_handle reg_method;
>  	struct acpi_namespace_node *next_node;
> @@ -792,9 +792,9 @@ acpi_ev_orphan_ec_reg_method(struct
> acpi_namespace_node *ec_device_node)
>  	struct acpi_object_list args;
>  	union acpi_object objects[2];
> 
> -	ACPI_FUNCTION_TRACE(ev_orphan_ec_reg_method);
> +	ACPI_FUNCTION_TRACE(ev_execute_orphan_reg_method);
> 
> -	if (!ec_device_node) {
> +	if (!device_node) {
>  		return_VOID;
>  	}
> 
> @@ -804,7 +804,7 @@ acpi_ev_orphan_ec_reg_method(struct
> acpi_namespace_node *ec_device_node)
> 
>  	/* Get a handle to a _REG method immediately under the EC device
> */
> 
> -	status = acpi_get_handle(ec_device_node, METHOD_NAME__REG,
> &reg_method);
> +	status = acpi_get_handle(device_node, METHOD_NAME__REG,
> &reg_method);
>  	if (ACPI_FAILURE(status)) {
>  		goto exit;	/* There is no _REG method present */
>  	}
> @@ -816,23 +816,23 @@ acpi_ev_orphan_ec_reg_method(struct
> acpi_namespace_node *ec_device_node)
>  	 * with other space IDs to be present; but the code below will then
>  	 * execute the _REG method with the embedded_control space_ID
> argument.
>  	 */
> -	next_node = acpi_ns_get_next_node(ec_device_node, NULL);
> +	next_node = acpi_ns_get_next_node(device_node, NULL);
>  	while (next_node) {
>  		if ((next_node->type == ACPI_TYPE_REGION) &&
>  		    (next_node->object) &&
> -		    (next_node->object->region.space_id ==
> ACPI_ADR_SPACE_EC)) {
> +		    (next_node->object->region.space_id == space_id)) {
>  			goto exit;	/* Do not execute the _REG */
>  		}
> 
> -		next_node = acpi_ns_get_next_node(ec_device_node,
> next_node);
> +		next_node = acpi_ns_get_next_node(device_node,
> next_node);
>  	}
> 
> -	/* Evaluate the _REG(embedded_control,Connect) method */
> +	/* Evaluate the _REG(space_id, Connect) method */
> 
>  	args.count = 2;
>  	args.pointer = objects;
>  	objects[0].type = ACPI_TYPE_INTEGER;
> -	objects[0].integer.value = ACPI_ADR_SPACE_EC;
> +	objects[0].integer.value = space_id;
>  	objects[1].type = ACPI_TYPE_INTEGER;
>  	objects[1].integer.value = ACPI_REG_CONNECT;
> 
> --
> 2.28.0

This looks good to me. Bob, any thoughts?

Erik

  reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-25  9:45 Hans de Goede
2020-10-26 20:55 ` Kaneda, Erik [this message]
2020-10-27 14:17   ` Moore, Robert
2020-10-27 17:43     ` Kaneda, Erik
2020-10-27 18:59       ` Hans de Goede
2020-10-28 22:33         ` Kaneda, Erik
2020-10-29  9:48           ` Hans de Goede
2020-10-30 18:57             ` Kaneda, Erik
2020-11-04 22:08           ` Moore, Robert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MWHPR11MB159947FE046515CE985CA571F0190@MWHPR11MB1599.namprd11.prod.outlook.com \
    --to=erik.kaneda@intel.com \
    --cc=devel@acpica.org \
    --cc=hdegoede@redhat.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=robert.moore@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ACPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-acpi/0 linux-acpi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-acpi linux-acpi/ https://lore.kernel.org/linux-acpi \
		linux-acpi@vger.kernel.org
	public-inbox-index linux-acpi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-acpi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git