* [PATCH 0/2] Input: Replace surface3_button code with soc_button_array
@ 2022-02-24 11:02 Hans de Goede
2022-02-24 11:02 ` [PATCH 1/2] Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons Hans de Goede
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Hans de Goede @ 2022-02-24 11:02 UTC (permalink / raw)
To: Rafael J . Wysocki, Dmitry Torokhov, Maximilian Luz, Mark Gross,
Andy Shevchenko
Cc: Hans de Goede, linux-acpi, linux-input, platform-driver-x86
Hi All,
I noticed that the surface3_button code was pretty much a 1:1 copy of
soc_button_array. This series adds support to soc_button_array for the
MSHW0028 device on the Microsoft Surface 3 (non pro) and removes the
now no longer needed surface3_button driver.
Rafael, this includes an addition to ignore_serial_bus_ids[] in
drivers/apci/scan.c, may we have your ack for merging this through
the input or pdx86 tree please ?
Dmitry, I believe it would be best to keep these 2 patches together
and merge both through either the input or the pdx86 tree. If you
are ok with me merging this through the pdx86 tree may I have your
Ack for that ?
If you prefer merging this through the input tree please consider
this my ack for also merge 2/2 through the input tree.
Note both patches can also be merged through separate trees without
issues but keeping them together seems better to me.
Regards,
Hans
Hans de Goede (2):
Input: soc_button_array - add support for Microsoft Surface 3
(MSHW0028) buttons
platform/surface: Remove Surface 3 Button driver
drivers/acpi/scan.c | 5 +
drivers/input/misc/soc_button_array.c | 24 +-
drivers/platform/surface/Kconfig | 7 -
drivers/platform/surface/Makefile | 1 -
drivers/platform/surface/surface3_button.c | 247 ---------------------
5 files changed, 28 insertions(+), 256 deletions(-)
delete mode 100644 drivers/platform/surface/surface3_button.c
--
2.35.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons
2022-02-24 11:02 [PATCH 0/2] Input: Replace surface3_button code with soc_button_array Hans de Goede
@ 2022-02-24 11:02 ` Hans de Goede
2022-02-24 13:08 ` Maximilian Luz
` (2 more replies)
2022-02-24 11:02 ` [PATCH 2/2] platform/surface: Remove Surface 3 Button driver Hans de Goede
` (2 subsequent siblings)
3 siblings, 3 replies; 9+ messages in thread
From: Hans de Goede @ 2022-02-24 11:02 UTC (permalink / raw)
To: Rafael J . Wysocki, Dmitry Torokhov, Maximilian Luz, Mark Gross,
Andy Shevchenko
Cc: Hans de Goede, linux-acpi, linux-input, platform-driver-x86
The drivers/platform/surface/surface3_button.c code is alsmost a 1:1 copy
of the soc_button_array code.
The only big difference is that it binds to an i2c_client rather then to
a platform_device. The cause of this is the ACPI resources for the MSHW0028
device containing a bogus I2cSerialBusV2 resource which causes the kernel
to instantiate an i2c_client for it instead of a platform_device.
Add "MSHW0028" to the ignore_serial_bus_ids[] list in drivers/apci/scan.c,
so that a platform_device will be instantiated and add support for
the MSHW0028 HID to soc_button_array.
This fully replaces surface3_button, which will be removed in a separate
commit (since it binds to the now no longer created i2c_client it no
longer does anyyhing after this commit).
Note the MSHW0028 id is used by Microsoft to describe the tablet buttons on
both the Surface 3 and the Surface 3 Pro and the actual API/implementation
for the Surface 3 Pro is quite different. The changes in this commit should
not impact the separate surfacepro3_button driver:
1. Because of the bogus I2cSerialBusV2 resource problem that driver binds
to the acpi_device itself, so instantiating a platform_device instead of
an i2c_client does not matter.
2. The soc_button_array driver will not bind to the MSHW0028 device on
the Surface 3 Pro, because it has no GPIO resources.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/acpi/scan.c | 5 +++++
drivers/input/misc/soc_button_array.c | 24 +++++++++++++++++++++++-
2 files changed, 28 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 4463c2eda61e..e993c8b253f5 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1749,6 +1749,11 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
{"INT3515", },
/* Non-conforming _HID for Cirrus Logic already released */
{"CLSA0100", },
+ /*
+ * Some ACPI devs contain SerialBus resources even though they are not
+ * attached to a serial bus at all.
+ */
+ {"MSHW0028", },
/*
* HIDs of device with an UartSerialBusV2 resource for which userspace
* expects a regular tty cdev to be created (instead of the in kernel
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index cb6ec59a045d..cbb1599a520e 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -469,6 +469,27 @@ static const struct soc_device_data soc_device_INT33D3 = {
.button_info = soc_button_INT33D3,
};
+/*
+ * Button info for Microsoft Surface 3 (non pro), this is indentical to
+ * the PNP0C40 info except that the home button is active-high.
+ *
+ * The Surface 3 Pro also has a MSHW0028 ACPI device, but that uses a custom
+ * version of the drivers/platform/x86/intel/hid.c 5 button array ACPI API
+ * instead. A check() callback is not necessary though as the Surface 3 Pro
+ * MSHW0028 ACPI device's resource table does not contain any GPIOs.
+ */
+static const struct soc_button_info soc_button_MSHW0028[] = {
+ { "power", 0, EV_KEY, KEY_POWER, false, true, true },
+ { "home", 1, EV_KEY, KEY_LEFTMETA, false, true, false },
+ { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true },
+ { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false, true },
+ { }
+};
+
+static const struct soc_device_data soc_device_MSHW0028 = {
+ .button_info = soc_button_MSHW0028,
+};
+
/*
* Special device check for Surface Book 2 and Surface Pro (2017).
* Both, the Surface Pro 4 (surfacepro3_button.c) and the above mentioned
@@ -535,7 +556,8 @@ static const struct acpi_device_id soc_button_acpi_match[] = {
{ "ID9001", (unsigned long)&soc_device_INT33D3 },
{ "ACPI0011", 0 },
- /* Microsoft Surface Devices (5th and 6th generation) */
+ /* Microsoft Surface Devices (3th, 5th and 6th generation) */
+ { "MSHW0028", (unsigned long)&soc_device_MSHW0028 },
{ "MSHW0040", (unsigned long)&soc_device_MSHW0040 },
{ }
--
2.35.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] platform/surface: Remove Surface 3 Button driver
2022-02-24 11:02 [PATCH 0/2] Input: Replace surface3_button code with soc_button_array Hans de Goede
2022-02-24 11:02 ` [PATCH 1/2] Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons Hans de Goede
@ 2022-02-24 11:02 ` Hans de Goede
2022-02-24 13:09 ` Maximilian Luz
2022-02-25 16:48 ` [PATCH 0/2] Input: Replace surface3_button code with soc_button_array Andy Shevchenko
2022-03-02 11:34 ` Hans de Goede
3 siblings, 1 reply; 9+ messages in thread
From: Hans de Goede @ 2022-02-24 11:02 UTC (permalink / raw)
To: Rafael J . Wysocki, Dmitry Torokhov, Maximilian Luz, Mark Gross,
Andy Shevchenko
Cc: Hans de Goede, linux-acpi, linux-input, platform-driver-x86
The Surface 3 buttons are now handled by the generic soc_button_array
driver. As part of adding support to soc_button_array the ACPI code
now instantiates a platform_device rather then an i2c_client so there
no longer is an i2c_client for this driver to bind to.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/platform/surface/Kconfig | 7 -
drivers/platform/surface/Makefile | 1 -
drivers/platform/surface/surface3_button.c | 247 ---------------------
3 files changed, 255 deletions(-)
delete mode 100644 drivers/platform/surface/surface3_button.c
diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig
index 463f1ec5c14e..eb79fbed8059 100644
--- a/drivers/platform/surface/Kconfig
+++ b/drivers/platform/surface/Kconfig
@@ -28,13 +28,6 @@ config SURFACE3_WMI
To compile this driver as a module, choose M here: the module will
be called surface3-wmi.
-config SURFACE_3_BUTTON
- tristate "Power/home/volume buttons driver for Microsoft Surface 3 tablet"
- depends on ACPI
- depends on KEYBOARD_GPIO && I2C
- help
- This driver handles the power/home/volume buttons on the Microsoft Surface 3 tablet.
-
config SURFACE_3_POWER_OPREGION
tristate "Surface 3 battery platform operation region support"
depends on ACPI
diff --git a/drivers/platform/surface/Makefile b/drivers/platform/surface/Makefile
index 32889482de55..0fc9cd3e4dd9 100644
--- a/drivers/platform/surface/Makefile
+++ b/drivers/platform/surface/Makefile
@@ -5,7 +5,6 @@
#
obj-$(CONFIG_SURFACE3_WMI) += surface3-wmi.o
-obj-$(CONFIG_SURFACE_3_BUTTON) += surface3_button.o
obj-$(CONFIG_SURFACE_3_POWER_OPREGION) += surface3_power.o
obj-$(CONFIG_SURFACE_ACPI_NOTIFY) += surface_acpi_notify.o
obj-$(CONFIG_SURFACE_AGGREGATOR) += aggregator/
diff --git a/drivers/platform/surface/surface3_button.c b/drivers/platform/surface/surface3_button.c
deleted file mode 100644
index 48d77e7aae76..000000000000
--- a/drivers/platform/surface/surface3_button.c
+++ /dev/null
@@ -1,247 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Supports for the button array on the Surface tablets.
- *
- * (C) Copyright 2016 Red Hat, Inc
- *
- * Based on soc_button_array.c:
- *
- * {C} Copyright 2014 Intel Corporation
- */
-
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/acpi.h>
-#include <linux/gpio/consumer.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-
-#define SURFACE_BUTTON_OBJ_NAME "TEV2"
-#define MAX_NBUTTONS 4
-
-/*
- * Some of the buttons like volume up/down are auto repeat, while others
- * are not. To support both, we register two platform devices, and put
- * buttons into them based on whether the key should be auto repeat.
- */
-#define BUTTON_TYPES 2
-
-/*
- * Power button, Home button, Volume buttons support is supposed to
- * be covered by drivers/input/misc/soc_button_array.c, which is implemented
- * according to "Windows ACPI Design Guide for SoC Platforms".
- * However surface 3 seems not to obey the specs, instead it uses
- * device TEV2(MSHW0028) for declaring the GPIOs. The gpios are also slightly
- * different in which the Home button is active high.
- * Compared to surfacepro3_button.c which also handles MSHW0028, the Surface 3
- * is a reduce platform and thus uses GPIOs, not ACPI events.
- * We choose an I2C driver here because we need to access the resources
- * declared under the device node, while surfacepro3_button.c only needs
- * the ACPI companion node.
- */
-static const struct acpi_device_id surface3_acpi_match[] = {
- { "MSHW0028", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(acpi, surface3_acpi_match);
-
-struct surface3_button_info {
- const char *name;
- int acpi_index;
- unsigned int event_type;
- unsigned int event_code;
- bool autorepeat;
- bool wakeup;
- bool active_low;
-};
-
-struct surface3_button_data {
- struct platform_device *children[BUTTON_TYPES];
-};
-
-/*
- * Get the Nth GPIO number from the ACPI object.
- */
-static int surface3_button_lookup_gpio(struct device *dev, int acpi_index)
-{
- struct gpio_desc *desc;
- int gpio;
-
- desc = gpiod_get_index(dev, NULL, acpi_index, GPIOD_ASIS);
- if (IS_ERR(desc))
- return PTR_ERR(desc);
-
- gpio = desc_to_gpio(desc);
-
- gpiod_put(desc);
-
- return gpio;
-}
-
-static struct platform_device *
-surface3_button_device_create(struct i2c_client *client,
- const struct surface3_button_info *button_info,
- bool autorepeat)
-{
- const struct surface3_button_info *info;
- struct platform_device *pd;
- struct gpio_keys_button *gpio_keys;
- struct gpio_keys_platform_data *gpio_keys_pdata;
- int n_buttons = 0;
- int gpio;
- int error;
-
- gpio_keys_pdata = devm_kzalloc(&client->dev,
- sizeof(*gpio_keys_pdata) +
- sizeof(*gpio_keys) * MAX_NBUTTONS,
- GFP_KERNEL);
- if (!gpio_keys_pdata)
- return ERR_PTR(-ENOMEM);
-
- gpio_keys = (void *)(gpio_keys_pdata + 1);
-
- for (info = button_info; info->name; info++) {
- if (info->autorepeat != autorepeat)
- continue;
-
- gpio = surface3_button_lookup_gpio(&client->dev,
- info->acpi_index);
- if (!gpio_is_valid(gpio))
- continue;
-
- gpio_keys[n_buttons].type = info->event_type;
- gpio_keys[n_buttons].code = info->event_code;
- gpio_keys[n_buttons].gpio = gpio;
- gpio_keys[n_buttons].active_low = info->active_low;
- gpio_keys[n_buttons].desc = info->name;
- gpio_keys[n_buttons].wakeup = info->wakeup;
- n_buttons++;
- }
-
- if (n_buttons == 0) {
- error = -ENODEV;
- goto err_free_mem;
- }
-
- gpio_keys_pdata->buttons = gpio_keys;
- gpio_keys_pdata->nbuttons = n_buttons;
- gpio_keys_pdata->rep = autorepeat;
-
- pd = platform_device_alloc("gpio-keys", PLATFORM_DEVID_AUTO);
- if (!pd) {
- error = -ENOMEM;
- goto err_free_mem;
- }
-
- error = platform_device_add_data(pd, gpio_keys_pdata,
- sizeof(*gpio_keys_pdata));
- if (error)
- goto err_free_pdev;
-
- error = platform_device_add(pd);
- if (error)
- goto err_free_pdev;
-
- return pd;
-
-err_free_pdev:
- platform_device_put(pd);
-err_free_mem:
- devm_kfree(&client->dev, gpio_keys_pdata);
- return ERR_PTR(error);
-}
-
-static int surface3_button_remove(struct i2c_client *client)
-{
- struct surface3_button_data *priv = i2c_get_clientdata(client);
-
- int i;
-
- for (i = 0; i < BUTTON_TYPES; i++)
- if (priv->children[i])
- platform_device_unregister(priv->children[i]);
-
- return 0;
-}
-
-static struct surface3_button_info surface3_button_surface3[] = {
- { "power", 0, EV_KEY, KEY_POWER, false, true, true },
- { "home", 1, EV_KEY, KEY_LEFTMETA, false, true, false },
- { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true },
- { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false, true },
- { }
-};
-
-static int surface3_button_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct device *dev = &client->dev;
- struct surface3_button_data *priv;
- struct platform_device *pd;
- int i;
- int error;
-
- if (strncmp(acpi_device_bid(ACPI_COMPANION(&client->dev)),
- SURFACE_BUTTON_OBJ_NAME,
- strlen(SURFACE_BUTTON_OBJ_NAME)))
- return -ENODEV;
-
- error = gpiod_count(dev, NULL);
- if (error < 0) {
- dev_dbg(dev, "no GPIO attached, ignoring...\n");
- return error;
- }
-
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- i2c_set_clientdata(client, priv);
-
- for (i = 0; i < BUTTON_TYPES; i++) {
- pd = surface3_button_device_create(client,
- surface3_button_surface3,
- i == 0);
- if (IS_ERR(pd)) {
- error = PTR_ERR(pd);
- if (error != -ENODEV) {
- surface3_button_remove(client);
- return error;
- }
- continue;
- }
-
- priv->children[i] = pd;
- }
-
- if (!priv->children[0] && !priv->children[1])
- return -ENODEV;
-
- return 0;
-}
-
-static const struct i2c_device_id surface3_id[] = {
- { }
-};
-MODULE_DEVICE_TABLE(i2c, surface3_id);
-
-static struct i2c_driver surface3_driver = {
- .probe = surface3_button_probe,
- .remove = surface3_button_remove,
- .id_table = surface3_id,
- .driver = {
- .name = "surface3",
- .acpi_match_table = ACPI_PTR(surface3_acpi_match),
- },
-};
-module_i2c_driver(surface3_driver);
-
-MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
-MODULE_DESCRIPTION("surface3 button array driver");
-MODULE_LICENSE("GPL v2");
--
2.35.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons
2022-02-24 11:02 ` [PATCH 1/2] Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons Hans de Goede
@ 2022-02-24 13:08 ` Maximilian Luz
2022-02-25 19:57 ` Rafael J. Wysocki
2022-03-01 20:41 ` Dmitry Torokhov
2 siblings, 0 replies; 9+ messages in thread
From: Maximilian Luz @ 2022-02-24 13:08 UTC (permalink / raw)
To: Hans de Goede, Rafael J . Wysocki, Dmitry Torokhov, Mark Gross,
Andy Shevchenko
Cc: linux-acpi, linux-input, platform-driver-x86
On 2/24/22 12:02, Hans de Goede wrote:
> The drivers/platform/surface/surface3_button.c code is alsmost a 1:1 copy
> of the soc_button_array code.
>
> The only big difference is that it binds to an i2c_client rather then to
> a platform_device. The cause of this is the ACPI resources for the MSHW0028
> device containing a bogus I2cSerialBusV2 resource which causes the kernel
> to instantiate an i2c_client for it instead of a platform_device.
>
> Add "MSHW0028" to the ignore_serial_bus_ids[] list in drivers/apci/scan.c,
> so that a platform_device will be instantiated and add support for
> the MSHW0028 HID to soc_button_array.
>
> This fully replaces surface3_button, which will be removed in a separate
> commit (since it binds to the now no longer created i2c_client it no
> longer does anyyhing after this commit).
>
> Note the MSHW0028 id is used by Microsoft to describe the tablet buttons on
> both the Surface 3 and the Surface 3 Pro and the actual API/implementation
> for the Surface 3 Pro is quite different. The changes in this commit should
> not impact the separate surfacepro3_button driver:
>
> 1. Because of the bogus I2cSerialBusV2 resource problem that driver binds
> to the acpi_device itself, so instantiating a platform_device instead of
> an i2c_client does not matter.
>
> 2. The soc_button_array driver will not bind to the MSHW0028 device on
> the Surface 3 Pro, because it has no GPIO resources.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Looks good to me.
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] platform/surface: Remove Surface 3 Button driver
2022-02-24 11:02 ` [PATCH 2/2] platform/surface: Remove Surface 3 Button driver Hans de Goede
@ 2022-02-24 13:09 ` Maximilian Luz
0 siblings, 0 replies; 9+ messages in thread
From: Maximilian Luz @ 2022-02-24 13:09 UTC (permalink / raw)
To: Hans de Goede, Rafael J . Wysocki, Dmitry Torokhov, Mark Gross,
Andy Shevchenko
Cc: linux-acpi, linux-input, platform-driver-x86
On 2/24/22 12:02, Hans de Goede wrote:
> The Surface 3 buttons are now handled by the generic soc_button_array
> driver. As part of adding support to soc_button_array the ACPI code
> now instantiates a platform_device rather then an i2c_client so there
> no longer is an i2c_client for this driver to bind to.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Looks good to me.
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 0/2] Input: Replace surface3_button code with soc_button_array
2022-02-24 11:02 [PATCH 0/2] Input: Replace surface3_button code with soc_button_array Hans de Goede
2022-02-24 11:02 ` [PATCH 1/2] Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons Hans de Goede
2022-02-24 11:02 ` [PATCH 2/2] platform/surface: Remove Surface 3 Button driver Hans de Goede
@ 2022-02-25 16:48 ` Andy Shevchenko
2022-03-02 11:34 ` Hans de Goede
3 siblings, 0 replies; 9+ messages in thread
From: Andy Shevchenko @ 2022-02-25 16:48 UTC (permalink / raw)
To: Hans de Goede
Cc: Rafael J . Wysocki, Dmitry Torokhov, Maximilian Luz, Mark Gross,
Andy Shevchenko, linux-acpi, linux-input, platform-driver-x86
On Thu, Feb 24, 2022 at 12:02:39PM +0100, Hans de Goede wrote:
> Hi All,
>
> I noticed that the surface3_button code was pretty much a 1:1 copy of
> soc_button_array. This series adds support to soc_button_array for the
> MSHW0028 device on the Microsoft Surface 3 (non pro) and removes the
> now no longer needed surface3_button driver.
Thanks, I like esp. patch 2 in this series.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Rafael, this includes an addition to ignore_serial_bus_ids[] in
> drivers/apci/scan.c, may we have your ack for merging this through
> the input or pdx86 tree please ?
>
> Dmitry, I believe it would be best to keep these 2 patches together
> and merge both through either the input or the pdx86 tree. If you
> are ok with me merging this through the pdx86 tree may I have your
> Ack for that ?
>
> If you prefer merging this through the input tree please consider
> this my ack for also merge 2/2 through the input tree.
>
> Note both patches can also be merged through separate trees without
> issues but keeping them together seems better to me.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons
2022-02-24 11:02 ` [PATCH 1/2] Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons Hans de Goede
2022-02-24 13:08 ` Maximilian Luz
@ 2022-02-25 19:57 ` Rafael J. Wysocki
2022-03-01 20:41 ` Dmitry Torokhov
2 siblings, 0 replies; 9+ messages in thread
From: Rafael J. Wysocki @ 2022-02-25 19:57 UTC (permalink / raw)
To: Hans de Goede
Cc: Rafael J . Wysocki, Dmitry Torokhov, Maximilian Luz, Mark Gross,
Andy Shevchenko, ACPI Devel Maling List, linux-input,
Platform Driver
On Thu, Feb 24, 2022 at 12:03 PM Hans de Goede <hdegoede@redhat.com> wrote:
>
> The drivers/platform/surface/surface3_button.c code is alsmost a 1:1 copy
> of the soc_button_array code.
>
> The only big difference is that it binds to an i2c_client rather then to
> a platform_device. The cause of this is the ACPI resources for the MSHW0028
> device containing a bogus I2cSerialBusV2 resource which causes the kernel
> to instantiate an i2c_client for it instead of a platform_device.
>
> Add "MSHW0028" to the ignore_serial_bus_ids[] list in drivers/apci/scan.c,
> so that a platform_device will be instantiated and add support for
> the MSHW0028 HID to soc_button_array.
>
> This fully replaces surface3_button, which will be removed in a separate
> commit (since it binds to the now no longer created i2c_client it no
> longer does anyyhing after this commit).
>
> Note the MSHW0028 id is used by Microsoft to describe the tablet buttons on
> both the Surface 3 and the Surface 3 Pro and the actual API/implementation
> for the Surface 3 Pro is quite different. The changes in this commit should
> not impact the separate surfacepro3_button driver:
>
> 1. Because of the bogus I2cSerialBusV2 resource problem that driver binds
> to the acpi_device itself, so instantiating a platform_device instead of
> an i2c_client does not matter.
>
> 2. The soc_button_array driver will not bind to the MSHW0028 device on
> the Surface 3 Pro, because it has no GPIO resources.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
for the change in scan.c and I'm expecting that you'll take care of
this series yourself. Otherwise, please let me know.
> ---
> drivers/acpi/scan.c | 5 +++++
> drivers/input/misc/soc_button_array.c | 24 +++++++++++++++++++++++-
> 2 files changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 4463c2eda61e..e993c8b253f5 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1749,6 +1749,11 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
> {"INT3515", },
> /* Non-conforming _HID for Cirrus Logic already released */
> {"CLSA0100", },
> + /*
> + * Some ACPI devs contain SerialBus resources even though they are not
> + * attached to a serial bus at all.
> + */
> + {"MSHW0028", },
> /*
> * HIDs of device with an UartSerialBusV2 resource for which userspace
> * expects a regular tty cdev to be created (instead of the in kernel
> diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
> index cb6ec59a045d..cbb1599a520e 100644
> --- a/drivers/input/misc/soc_button_array.c
> +++ b/drivers/input/misc/soc_button_array.c
> @@ -469,6 +469,27 @@ static const struct soc_device_data soc_device_INT33D3 = {
> .button_info = soc_button_INT33D3,
> };
>
> +/*
> + * Button info for Microsoft Surface 3 (non pro), this is indentical to
> + * the PNP0C40 info except that the home button is active-high.
> + *
> + * The Surface 3 Pro also has a MSHW0028 ACPI device, but that uses a custom
> + * version of the drivers/platform/x86/intel/hid.c 5 button array ACPI API
> + * instead. A check() callback is not necessary though as the Surface 3 Pro
> + * MSHW0028 ACPI device's resource table does not contain any GPIOs.
> + */
> +static const struct soc_button_info soc_button_MSHW0028[] = {
> + { "power", 0, EV_KEY, KEY_POWER, false, true, true },
> + { "home", 1, EV_KEY, KEY_LEFTMETA, false, true, false },
> + { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true },
> + { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false, true },
> + { }
> +};
> +
> +static const struct soc_device_data soc_device_MSHW0028 = {
> + .button_info = soc_button_MSHW0028,
> +};
> +
> /*
> * Special device check for Surface Book 2 and Surface Pro (2017).
> * Both, the Surface Pro 4 (surfacepro3_button.c) and the above mentioned
> @@ -535,7 +556,8 @@ static const struct acpi_device_id soc_button_acpi_match[] = {
> { "ID9001", (unsigned long)&soc_device_INT33D3 },
> { "ACPI0011", 0 },
>
> - /* Microsoft Surface Devices (5th and 6th generation) */
> + /* Microsoft Surface Devices (3th, 5th and 6th generation) */
> + { "MSHW0028", (unsigned long)&soc_device_MSHW0028 },
> { "MSHW0040", (unsigned long)&soc_device_MSHW0040 },
>
> { }
> --
> 2.35.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons
2022-02-24 11:02 ` [PATCH 1/2] Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons Hans de Goede
2022-02-24 13:08 ` Maximilian Luz
2022-02-25 19:57 ` Rafael J. Wysocki
@ 2022-03-01 20:41 ` Dmitry Torokhov
2 siblings, 0 replies; 9+ messages in thread
From: Dmitry Torokhov @ 2022-03-01 20:41 UTC (permalink / raw)
To: Hans de Goede
Cc: Rafael J . Wysocki, Maximilian Luz, Mark Gross, Andy Shevchenko,
linux-acpi, linux-input, platform-driver-x86
On Thu, Feb 24, 2022 at 12:02:40PM +0100, Hans de Goede wrote:
> The drivers/platform/surface/surface3_button.c code is alsmost a 1:1 copy
> of the soc_button_array code.
>
> The only big difference is that it binds to an i2c_client rather then to
> a platform_device. The cause of this is the ACPI resources for the MSHW0028
> device containing a bogus I2cSerialBusV2 resource which causes the kernel
> to instantiate an i2c_client for it instead of a platform_device.
>
> Add "MSHW0028" to the ignore_serial_bus_ids[] list in drivers/apci/scan.c,
> so that a platform_device will be instantiated and add support for
> the MSHW0028 HID to soc_button_array.
>
> This fully replaces surface3_button, which will be removed in a separate
> commit (since it binds to the now no longer created i2c_client it no
> longer does anyyhing after this commit).
>
> Note the MSHW0028 id is used by Microsoft to describe the tablet buttons on
> both the Surface 3 and the Surface 3 Pro and the actual API/implementation
> for the Surface 3 Pro is quite different. The changes in this commit should
> not impact the separate surfacepro3_button driver:
>
> 1. Because of the bogus I2cSerialBusV2 resource problem that driver binds
> to the acpi_device itself, so instantiating a platform_device instead of
> an i2c_client does not matter.
>
> 2. The soc_button_array driver will not bind to the MSHW0028 device on
> the Surface 3 Pro, because it has no GPIO resources.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Please feel free to merge through platform tree.
Thanks.
--
Dmitry
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 0/2] Input: Replace surface3_button code with soc_button_array
2022-02-24 11:02 [PATCH 0/2] Input: Replace surface3_button code with soc_button_array Hans de Goede
` (2 preceding siblings ...)
2022-02-25 16:48 ` [PATCH 0/2] Input: Replace surface3_button code with soc_button_array Andy Shevchenko
@ 2022-03-02 11:34 ` Hans de Goede
3 siblings, 0 replies; 9+ messages in thread
From: Hans de Goede @ 2022-03-02 11:34 UTC (permalink / raw)
To: Rafael J . Wysocki, Dmitry Torokhov, Maximilian Luz, Mark Gross,
Andy Shevchenko
Cc: linux-acpi, linux-input, platform-driver-x86
Hi All,
On 2/24/22 12:02, Hans de Goede wrote:
> Hi All,
>
> I noticed that the surface3_button code was pretty much a 1:1 copy of
> soc_button_array. This series adds support to soc_button_array for the
> MSHW0028 device on the Microsoft Surface 3 (non pro) and removes the
> now no longer needed surface3_button driver.
>
> Rafael, this includes an addition to ignore_serial_bus_ids[] in
> drivers/apci/scan.c, may we have your ack for merging this through
> the input or pdx86 tree please ?
>
> Dmitry, I believe it would be best to keep these 2 patches together
> and merge both through either the input or the pdx86 tree. If you
> are ok with me merging this through the pdx86 tree may I have your
> Ack for that ?
>
> If you prefer merging this through the input tree please consider
> this my ack for also merge 2/2 through the input tree.
>
> Note both patches can also be merged through separate trees without
> issues but keeping them together seems better to me.
Thank you all for the reviews + acks,
I've added this series to my review-hans (soon to be for-next) branch now.
Regards,
Hans
> Hans de Goede (2):
> Input: soc_button_array - add support for Microsoft Surface 3
> (MSHW0028) buttons
> platform/surface: Remove Surface 3 Button driver
>
> drivers/acpi/scan.c | 5 +
> drivers/input/misc/soc_button_array.c | 24 +-
> drivers/platform/surface/Kconfig | 7 -
> drivers/platform/surface/Makefile | 1 -
> drivers/platform/surface/surface3_button.c | 247 ---------------------
> 5 files changed, 28 insertions(+), 256 deletions(-)
> delete mode 100644 drivers/platform/surface/surface3_button.c
>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-03-02 11:34 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-24 11:02 [PATCH 0/2] Input: Replace surface3_button code with soc_button_array Hans de Goede
2022-02-24 11:02 ` [PATCH 1/2] Input: soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons Hans de Goede
2022-02-24 13:08 ` Maximilian Luz
2022-02-25 19:57 ` Rafael J. Wysocki
2022-03-01 20:41 ` Dmitry Torokhov
2022-02-24 11:02 ` [PATCH 2/2] platform/surface: Remove Surface 3 Button driver Hans de Goede
2022-02-24 13:09 ` Maximilian Luz
2022-02-25 16:48 ` [PATCH 0/2] Input: Replace surface3_button code with soc_button_array Andy Shevchenko
2022-03-02 11:34 ` Hans de Goede
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).