linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jianxin Pan <jianxin.pan@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
	Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh@kernel.org>,
	Hanjie Lin <hanjie.lin@amlogic.com>,
	Victor Wan <victor.wan@amlogic.com>,
	Jianxin Pan <jianxin.pan@amlogic.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Yixun Lan <yixun.lan@amlogic.com>,
	linux-kernel@vger.kernel.org,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Liang Yang <liang.yang@amlogic.com>,
	Jian Hu <jian.hu@amlogic.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Carlo Caione <carlo@caione.org>,
	linux-amlogic@lists.infradead.org,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Qiufang Dai <qiufang.dai@amlogic.com>
Subject: [PATCH RESEND v8 2/4] clk: meson: add emmc sub clock phase delay driver
Date: Wed, 19 Dec 2018 19:40:40 +0800	[thread overview]
Message-ID: <1545219642-9834-3-git-send-email-jianxin.pan@amlogic.com> (raw)
In-Reply-To: <1545219642-9834-1-git-send-email-jianxin.pan@amlogic.com>

From: Yixun Lan <yixun.lan@amlogic.com>

Export the emmc sub clock phase delay ops which will be used
by the emmc sub clock driver itself.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
---
 drivers/clk/meson/Makefile          |  1 +
 drivers/clk/meson/clk-phase-delay.c | 73 +++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/clkc.h            |  7 ++++
 3 files changed, 81 insertions(+)
 create mode 100644 drivers/clk/meson/clk-phase-delay.c

diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index acd8694..d59620d 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o vid-pll-div.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-phase-delay.o
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-input.o
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += sclk-div.o
 obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o
diff --git a/drivers/clk/meson/clk-phase-delay.c b/drivers/clk/meson/clk-phase-delay.c
new file mode 100644
index 0000000..a6e6600
--- /dev/null
+++ b/drivers/clk/meson/clk-phase-delay.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Amlogic Meson MMC Sub Clock Controller Driver
+ *
+ * Copyright (c) 2017 Baylibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ * Author: Jianxin Pan <jianxin.pan@amlogic.com>
+ */
+
+#include <linux/clk-provider.h>
+#include "clkc.h"
+
+static inline struct meson_clk_phase_delay_data *
+meson_clk_get_phase_delay_data(struct clk_regmap *clk)
+{
+	return clk->data;
+}
+
+static int meson_clk_phase_delay_get_phase(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_clk_phase_delay_data *ph;
+	unsigned long period_ps, p, d;
+	int degrees;
+
+	ph = meson_clk_get_phase_delay_data(clk);
+	p = meson_parm_read(clk->map, &ph->phase);
+	degrees = p * 360 / (1 << (ph->phase.width));
+
+	period_ps = DIV_ROUND_UP_ULL(NSEC_PER_SEC * 1000ull,
+				     clk_hw_get_rate(hw));
+
+	d = meson_parm_read(clk->map, &ph->delay);
+	degrees += d * ph->delay_step_ps * 360 / period_ps;
+	degrees %= 360;
+
+	return degrees;
+}
+
+static int meson_clk_phase_delay_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_clk_phase_delay_data *ph;
+	unsigned long period_ps, d = 0;
+	unsigned int p;
+
+	ph = meson_clk_get_phase_delay_data(clk);
+	period_ps = DIV_ROUND_UP_ULL(NSEC_PER_SEC * 1000ull,
+				     clk_hw_get_rate(hw));
+
+	/*
+	 * First compute the phase index (p), the remainder (r) is the
+	 * part we'll try to acheive using the delays (d).
+	 */
+	p = 360 / 1 << (ph->phase.width);
+	degrees = degrees / p;
+	d = DIV_ROUND_CLOSEST((degrees % p) * period_ps,
+			      360 * ph->delay_step_ps);
+	d = min(d, PMASK(ph->delay.width));
+
+	meson_parm_write(clk->map, &ph->phase, degrees);
+	meson_parm_write(clk->map, &ph->delay, d);
+	return 0;
+}
+
+const struct clk_ops meson_clk_phase_delay_ops = {
+	.get_phase = meson_clk_phase_delay_get_phase,
+	.set_phase = meson_clk_phase_delay_set_phase,
+};
+EXPORT_SYMBOL_GPL(meson_clk_phase_delay_ops);
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 00b3320..e6f0905 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -118,6 +118,12 @@ struct clk_regmap _name = {						\
 	},								\
 };
 
+struct meson_clk_phase_delay_data {
+	struct parm	phase;
+	struct parm	delay;
+	unsigned int	delay_step_ps;
+};
+
 /* clk_ops */
 extern const struct clk_ops meson_clk_pll_ro_ops;
 extern const struct clk_ops meson_clk_pll_ops;
@@ -127,6 +133,7 @@ struct clk_regmap _name = {						\
 extern const struct clk_ops meson_clk_phase_ops;
 extern const struct clk_ops meson_vid_pll_div_ro_ops;
 extern const struct clk_ops meson_sclk_div_ops;
+extern const struct clk_ops meson_clk_phase_delay_ops;
 
 struct clk_hw *meson_clk_hw_register_input(struct device *dev,
 					   const char *of_name,
-- 
1.9.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2018-12-19 11:43 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-19 11:40 [PATCH RESEND v8 0/4] clk: meson: add a sub EMMC clock controller support Jianxin Pan
2018-12-19 11:40 ` [PATCH RESEND v8 1/4] clk: meson: add one based divider support for sclk divider Jianxin Pan
2018-12-19 11:40 ` Jianxin Pan [this message]
2018-12-19 11:40 ` [PATCH RESEND v8 3/4] clk: meson: add DT documentation for emmc clock controller Jianxin Pan
2018-12-19 11:40 ` [PATCH RESEND v8 4/4] clk: meson: add sub MMC clock controller driver Jianxin Pan
2018-12-31 20:12   ` kbuild test robot
2018-12-31 21:05   ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1545219642-9834-3-git-send-email-jianxin.pan@amlogic.com \
    --to=jianxin.pan@amlogic.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=carlo@caione.org \
    --cc=hanjie.lin@amlogic.com \
    --cc=jbrunet@baylibre.com \
    --cc=jian.hu@amlogic.com \
    --cc=khilman@baylibre.com \
    --cc=liang.yang@amlogic.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=mturquette@baylibre.com \
    --cc=narmstrong@baylibre.com \
    --cc=qiufang.dai@amlogic.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=victor.wan@amlogic.com \
    --cc=yixun.lan@amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).