[PATCH 00/12] add missing of_node_put after of_device_is_available

[PATCH 00/12] add missing of_node_put after of_device_is_available

[Julia Lawall]

Failure of of_device_is_available implies that the device node
should be put, if it is not used otherwise.

---

 arch/arm/mach-omap2/display.c                            |    4 +++-
 arch/powerpc/platforms/83xx/usb.c                        |    4 +++-
 drivers/bus/arm-cci.c                                    |    4 +++-
 drivers/cpufreq/armada-8k-cpufreq.c                      |    4 +++-
 drivers/crypto/amcc/crypto4xx_trng.c                     |    4 +++-
 drivers/firmware/psci.c                                  |    4 +++-
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c          |    4 +++-
 drivers/gpu/drm/tegra/rgb.c                              |    4 +++-
 drivers/phy/tegra/xusb.c                                 |    4 +++-
 drivers/soc/amlogic/meson-gx-socinfo.c                   |    4 +++-
 drivers/tee/optee/core.c                                 |    4 +++-
 drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c |    4 +++-
 12 files changed, 36 insertions(+), 12 deletions(-)

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Julia Lawall]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

---
 drivers/soc/amlogic/meson-gx-socinfo.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff -u -p a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c
--- a/drivers/soc/amlogic/meson-gx-socinfo.c
+++ b/drivers/soc/amlogic/meson-gx-socinfo.c
@@ -123,8 +123,10 @@ static int __init meson_gx_socinfo_init(
 		return -ENODEV;
 
 	/* check if interface is enabled */
-	if (!of_device_is_available(np))
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	/* check if chip-id is available */
 	if (!of_property_read_bool(np, "amlogic,has-chip-id"))


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Kevin Hilman]

Julia Lawall <Julia.Lawall@lip6.fr> writes:

> Add an of_node_put when a tested device node is not available.

[...] 
]

> Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>

Patch applied,

Thanks,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 09/12] meson-gx-socinfo: add missing of_node_put after of_device_is_available

[Markus Elfring]

> @@ -123,8 +123,10 @@  static int __init meson_gx_socinfo_init(
>  		return -ENODEV;
>
>  	/* check if interface is enabled */
> -	if (!of_device_is_available(np))
> +	if (!of_device_is_available(np)) {
> +		of_node_put(np);
>  		return -ENODEV;
> +	}
>
>  	/* check if chip-id is available */
>  	if (!of_property_read_bool(np, "amlogic,has-chip-id"))

How do you think about to adjust the exception handling in this function
implementation a bit more according to the Linux coding style?

Regards,
Markus

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic