Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 0/2] add meson secure watchdog driver
@ 2019-11-25 12:33 Xingyu Chen
  2019-11-25 12:33 ` [PATCH v4 1/2] firmware: meson_sm: add new SMC ID support for accessing secure watchdog Xingyu Chen
  2019-11-25 12:33 ` [PATCH v4 2/2] watchdog: add meson secure watchdog driver Xingyu Chen
  0 siblings, 2 replies; 3+ messages in thread
From: Xingyu Chen @ 2019-11-25 12:33 UTC (permalink / raw)
  To: Wim Van Sebroeck, Guenter Roeck, Kevin Hilman, Neil Armstrong,
	Rob Herring
  Cc: Qianggui Song, linux-watchdog, Jianxin Pan, linux-kernel,
	Jian Hu, linux-arm-kernel, linux-amlogic, Xingyu Chen,
	Jerome Brunet

The watchdog controller on the Meson-A/C series SoCs is moved to secure world,
We have to call SMC instruction to trap the ATF for watchdog operation. These
operations are different from previous SoCs, so we introduce a new watchdog
driver to support this kind of SoCs.

Chnages since v3 at [2]:
- add SM_A1_ prefix for WATCHDOG_OPS
- remove phandle to secure-monitor node
- remove watchdog node from dts, and register wdt device by platform_device_register_simple()
- remove dt-binding for meson secure watchdog
- use the msec as unit of timeout parameter which is passed to fw side

Changes since v2 at [1]:
- remove useless dependency in Kconfig
- return zero when getting left time value fails

Changes since v1 at [0]:
- add a new dependency in Kconfig
- simplify/add the return operation
- remove useless ping operation when setting the timeout
- fix some return values
- fix the license statement

[0]:https://lore.kernel.org/linux-amlogic/1570874721-36077-1-git-send-email-xingyu.chen@amlogic.com
[1]:https://lore.kernel.org/linux-amlogic/1571387622-35132-1-git-send-email-xingyu.chen@amlogic.com
[2]:https://lore.kernel.org/linux-amlogic/1571983984-11771-1-git-send-email-xingyu.chen@amlogic.com

Xingyu Chen (2):
  firmware: meson_sm: add new SMC ID support for accessing secure
    watchdog
  watchdog: add meson secure watchdog driver

 drivers/firmware/meson/meson_sm.c       |   1 +
 drivers/watchdog/Kconfig                |  16 +++
 drivers/watchdog/Makefile               |   1 +
 drivers/watchdog/meson_sec_wdt.c        | 207 ++++++++++++++++++++++++++++++++
 include/linux/firmware/meson/meson_sm.h |   1 +
 5 files changed, 226 insertions(+)
 create mode 100644 drivers/watchdog/meson_sec_wdt.c

-- 
2.7.4


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH v4 1/2] firmware: meson_sm: add new SMC ID support for accessing secure watchdog
  2019-11-25 12:33 [PATCH v4 0/2] add meson secure watchdog driver Xingyu Chen
@ 2019-11-25 12:33 ` Xingyu Chen
  2019-11-25 12:33 ` [PATCH v4 2/2] watchdog: add meson secure watchdog driver Xingyu Chen
  1 sibling, 0 replies; 3+ messages in thread
From: Xingyu Chen @ 2019-11-25 12:33 UTC (permalink / raw)
  To: Wim Van Sebroeck, Guenter Roeck, Kevin Hilman, Neil Armstrong,
	Rob Herring
  Cc: Qianggui Song, linux-watchdog, Jianxin Pan, linux-kernel,
	Jian Hu, linux-arm-kernel, linux-amlogic, Xingyu Chen,
	Jerome Brunet

The new SMC ID is used to access secure registers by meson secure
watchdog driver.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
---
 drivers/firmware/meson/meson_sm.c       | 1 +
 include/linux/firmware/meson/meson_sm.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c
index 1d5b4d7..8cdd405 100644
--- a/drivers/firmware/meson/meson_sm.c
+++ b/drivers/firmware/meson/meson_sm.c
@@ -44,6 +44,7 @@ static const struct meson_sm_chip gxbb_chip = {
 		CMD(SM_EFUSE_WRITE,	0x82000031),
 		CMD(SM_EFUSE_USER_MAX,	0x82000033),
 		CMD(SM_GET_CHIP_ID,	0x82000044),
+		CMD(SM_A1_WATCHDOG_OPS,	0x82000086),
 		{ /* sentinel */ },
 	},
 };
diff --git a/include/linux/firmware/meson/meson_sm.h b/include/linux/firmware/meson/meson_sm.h
index 6669e2a..9ef1524 100644
--- a/include/linux/firmware/meson/meson_sm.h
+++ b/include/linux/firmware/meson/meson_sm.h
@@ -12,6 +12,7 @@ enum {
 	SM_EFUSE_WRITE,
 	SM_EFUSE_USER_MAX,
 	SM_GET_CHIP_ID,
+	SM_A1_WATCHDOG_OPS,
 };
 
 struct meson_sm_firmware;
-- 
2.7.4


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH v4 2/2] watchdog: add meson secure watchdog driver
  2019-11-25 12:33 [PATCH v4 0/2] add meson secure watchdog driver Xingyu Chen
  2019-11-25 12:33 ` [PATCH v4 1/2] firmware: meson_sm: add new SMC ID support for accessing secure watchdog Xingyu Chen
@ 2019-11-25 12:33 ` Xingyu Chen
  1 sibling, 0 replies; 3+ messages in thread
From: Xingyu Chen @ 2019-11-25 12:33 UTC (permalink / raw)
  To: Wim Van Sebroeck, Guenter Roeck, Kevin Hilman, Neil Armstrong,
	Rob Herring
  Cc: Qianggui Song, linux-watchdog, Jianxin Pan, linux-kernel,
	Jian Hu, linux-arm-kernel, linux-amlogic, Xingyu Chen,
	Jerome Brunet

The watchdog controller on the Meson-A/C series SoCs is moved to secure
world, watchdog operation needs to be done in secure EL3 mode via ATF,
Non-secure world can call SMC instruction to trap to AFT for watchdog
operation.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
---
 drivers/watchdog/Kconfig         |  16 +++
 drivers/watchdog/Makefile        |   1 +
 drivers/watchdog/meson_sec_wdt.c | 207 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 224 insertions(+)
 create mode 100644 drivers/watchdog/meson_sec_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 58e7c10..e305fba 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -826,6 +826,22 @@ config MESON_GXBB_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called meson_gxbb_wdt.
 
+config MESON_SEC_WATCHDOG
+	tristate "Amlogic Meson Secure watchdog support"
+	depends on MESON_SM
+	select WATCHDOG_CORE
+	help
+	  The watchdog controller on the Meson-A/C series SoCs is moved to
+	  secure world, watchdog operation needs to be done in secure EL3
+	  mode via ATF, non-secure world can call SMC instruction to trap
+	  to ATF for the watchdog operation.
+
+	  Say Y here if watchdog controller on Meson SoCs is located in
+	  secure world.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called meson_sec_wdt.
+
 config MESON_WATCHDOG
 	tristate "Amlogic Meson SoCs watchdog support"
 	depends on ARCH_MESON || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 2ee352b..5e6b73d 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -78,6 +78,7 @@ obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
 obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
 obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
 obj-$(CONFIG_MESON_GXBB_WATCHDOG) += meson_gxbb_wdt.o
+obj-$(CONFIG_MESON_SEC_WATCHDOG) += meson_sec_wdt.o
 obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
 obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
 obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
diff --git a/drivers/watchdog/meson_sec_wdt.c b/drivers/watchdog/meson_sec_wdt.c
new file mode 100644
index 00000000..c022d6d
--- /dev/null
+++ b/drivers/watchdog/meson_sec_wdt.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Xingyu Chen <xingyu.chen@amlogic.com>
+ *
+ */
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/firmware/meson/meson_sm.h>
+
+#define MESON_SIP_WDT_DISABLE		0x1
+#define MESON_SIP_WDT_ENABLE		0x2
+#define MESON_SIP_WDT_PING		0x3
+#define MESON_SIP_WDT_INIT		0x4
+#define MESON_SIP_WDT_RESETNOW		0x5
+#define MESON_SIP_WDT_SETTIMEOUT	0x6
+#define MESON_SIP_WDT_GETTIMELEFT	0x7
+
+#define DEFAULT_TIMEOUT			30 /* seconds */
+
+/*
+ * Watchdog timer tick is set to 1ms in secfw side, and tick count is
+ * stored in the bit[16-31] of WATCHDOG_CNT register, so the maximum
+ * timeout value is 0xffff ms.
+ */
+#define MAX_TIMEOUT_MS			0xFFFF
+#define DRV_NAME			"meson-sec-wdt"
+
+static struct platform_device *platform_device;
+struct meson_sec_wdt {
+	struct watchdog_device wdt_dev;
+	struct meson_sm_firmware *fw;
+};
+
+static int meson_sec_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct meson_sec_wdt *data = watchdog_get_drvdata(wdt_dev);
+
+	return meson_sm_call(data->fw, SM_A1_WATCHDOG_OPS, NULL,
+			     MESON_SIP_WDT_ENABLE, 0, 0, 0, 0);
+}
+
+static int meson_sec_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct meson_sec_wdt *data = watchdog_get_drvdata(wdt_dev);
+
+	return meson_sm_call(data->fw, SM_A1_WATCHDOG_OPS, NULL,
+			     MESON_SIP_WDT_DISABLE, 0, 0, 0, 0);
+}
+
+static int meson_sec_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct meson_sec_wdt *data = watchdog_get_drvdata(wdt_dev);
+
+	return meson_sm_call(data->fw, SM_A1_WATCHDOG_OPS, NULL,
+			     MESON_SIP_WDT_PING, 0, 0, 0, 0);
+}
+
+static int meson_sec_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				     unsigned int timeout)
+{
+	struct meson_sec_wdt *data = watchdog_get_drvdata(wdt_dev);
+
+	wdt_dev->timeout = timeout;
+
+	return meson_sm_call(data->fw, SM_A1_WATCHDOG_OPS, NULL,
+			     MESON_SIP_WDT_SETTIMEOUT,
+			     wdt_dev->timeout * 1000, 0, 0, 0);
+}
+
+static unsigned int meson_sec_wdt_get_timeleft(struct watchdog_device *wdt_dev)
+{
+	int ret;
+	unsigned int timeleft;
+	struct meson_sec_wdt *data = watchdog_get_drvdata(wdt_dev);
+
+	ret = meson_sm_call(data->fw, SM_A1_WATCHDOG_OPS, &timeleft,
+			    MESON_SIP_WDT_GETTIMELEFT, 0, 0, 0, 0);
+
+	if (ret)
+		return 0;
+
+	return timeleft;
+}
+
+static const struct watchdog_ops meson_sec_wdt_ops = {
+	.start = meson_sec_wdt_start,
+	.stop = meson_sec_wdt_stop,
+	.ping = meson_sec_wdt_ping,
+	.set_timeout = meson_sec_wdt_set_timeout,
+	.get_timeleft = meson_sec_wdt_get_timeleft,
+};
+
+static const struct watchdog_info meson_sec_wdt_info = {
+	.identity = "Meson Secure Watchdog Timer",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static int __maybe_unused meson_sec_wdt_resume(struct device *dev)
+{
+	struct meson_sec_wdt *data = dev_get_drvdata(dev);
+
+	if (watchdog_active(&data->wdt_dev))
+		return meson_sec_wdt_start(&data->wdt_dev);
+
+	return 0;
+}
+
+static int __maybe_unused meson_sec_wdt_suspend(struct device *dev)
+{
+	struct meson_sec_wdt *data = dev_get_drvdata(dev);
+
+	if (watchdog_active(&data->wdt_dev))
+		return meson_sec_wdt_stop(&data->wdt_dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops meson_sec_wdt_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(meson_sec_wdt_suspend, meson_sec_wdt_resume)
+};
+
+static int meson_sec_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct meson_sec_wdt *data;
+	struct device_node *sm_np;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	sm_np = of_find_compatible_node(NULL, NULL, "amlogic,meson-gxbb-sm");
+	if (!sm_np) {
+		dev_err(&pdev->dev, "no secure-monitor node\n");
+		return -EINVAL;
+	}
+
+	data->fw = meson_sm_get(sm_np);
+	of_node_put(sm_np);
+	if (!data->fw)
+		return -EPROBE_DEFER;
+
+	platform_set_drvdata(pdev, data);
+
+	data->wdt_dev.parent = dev;
+	data->wdt_dev.info = &meson_sec_wdt_info;
+	data->wdt_dev.ops = &meson_sec_wdt_ops;
+	data->wdt_dev.max_hw_heartbeat_ms = MAX_TIMEOUT_MS;
+	data->wdt_dev.min_timeout = 1;
+	data->wdt_dev.timeout = DEFAULT_TIMEOUT;
+	watchdog_set_drvdata(&data->wdt_dev, data);
+
+	ret = meson_sm_call(data->fw, SM_A1_WATCHDOG_OPS, NULL,
+			    MESON_SIP_WDT_INIT,
+			    data->wdt_dev.timeout * 1000, 0, 0, 0);
+	if (ret)
+		return ret;
+
+	watchdog_stop_on_reboot(&data->wdt_dev);
+
+	return devm_watchdog_register_device(dev, &data->wdt_dev);
+}
+
+static struct platform_driver meson_sec_wdt_driver = {
+	.probe	= meson_sec_wdt_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.pm = &meson_sec_wdt_pm_ops,
+	},
+};
+
+static int __init meson_sec_wdt_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&meson_sec_wdt_driver);
+	if (ret)
+		return ret;
+
+	platform_device = platform_device_register_simple(DRV_NAME,
+							  -1, NULL, 0);
+	if (IS_ERR(platform_device)) {
+		ret = PTR_ERR(platform_device);
+		platform_driver_unregister(&meson_sec_wdt_driver);
+	}
+
+	return ret;
+}
+
+static void __exit meson_sec_wdt_exit(void)
+{
+	platform_device_unregister(platform_device);
+	platform_driver_unregister(&meson_sec_wdt_driver);
+}
+
+module_init(meson_sec_wdt_init);
+module_exit(meson_sec_wdt_exit);
+
+MODULE_AUTHOR("Xingyu Chen <xingyu.chen@amlogic.com>");
+MODULE_DESCRIPTION("Amlogic Secure Watchdog Timer Driver");
+MODULE_LICENSE("Dual MIT/GPL");
-- 
2.7.4


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-25 12:33 [PATCH v4 0/2] add meson secure watchdog driver Xingyu Chen
2019-11-25 12:33 ` [PATCH v4 1/2] firmware: meson_sm: add new SMC ID support for accessing secure watchdog Xingyu Chen
2019-11-25 12:33 ` [PATCH v4 2/2] watchdog: add meson secure watchdog driver Xingyu Chen

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git