Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
From: Guillaume La Roque <glaroque@baylibre.com>
To: linus.walleij@linaro.org, khilman@baylibre.com
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	jbrunet@baylibre.com
Subject: [PATCH v4 4/6] pinctrl: meson: Rework enable/disable bias part
Date: Thu,  9 May 2019 18:29:18 +0200
Message-ID: <20190509162920.7054-5-glaroque@baylibre.com> (raw)
In-Reply-To: <20190509162920.7054-1-glaroque@baylibre.com>

rework bias enable/disable part to prepare drive-strength integration
no functional changes

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson.c | 85 +++++++++++++++------------
 1 file changed, 49 insertions(+), 36 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index 96a4a72708e4..8ea5c1527064 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -174,62 +174,75 @@ int meson_pmx_get_groups(struct pinctrl_dev *pcdev, unsigned selector,
 	return 0;
 }
 
-static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
-			     unsigned long *configs, unsigned num_configs)
+static int meson_pinconf_disable_bias(struct meson_pinctrl *pc,
+				      unsigned int pin)
 {
-	struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
 	struct meson_bank *bank;
-	enum pin_config_param param;
-	unsigned int reg, bit;
-	int i, ret;
+	unsigned int reg, bit = 0;
+	int ret;
 
 	ret = meson_get_bank(pc, pin, &bank);
 	if (ret)
 		return ret;
 
+	meson_calc_reg_and_bit(bank, pin, REG_PULLEN, &reg, &bit);
+	ret = regmap_update_bits(pc->reg_pullen, reg, BIT(bit), 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int meson_pinconf_enable_bias(struct meson_pinctrl *pc, unsigned int pin,
+				     bool pull_up)
+{
+	struct meson_bank *bank;
+	unsigned int reg, bit, val = 0;
+	int ret;
+
+	ret = meson_get_bank(pc, pin, &bank);
+	if (ret)
+		return ret;
+
+	meson_calc_reg_and_bit(bank, pin, REG_PULL, &reg, &bit);
+	if (pull_up)
+		val = BIT(bit);
+
+	ret = regmap_update_bits(pc->reg_pull, reg, BIT(bit), val);
+	if (ret)
+		return ret;
+
+	meson_calc_reg_and_bit(bank, pin, REG_PULLEN, &reg, &bit);
+	ret = regmap_update_bits(pc->reg_pullen, reg, BIT(bit),	BIT(bit));
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
+			     unsigned long *configs, unsigned num_configs)
+{
+	struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+	enum pin_config_param param;
+	int i, ret;
+
 	for (i = 0; i < num_configs; i++) {
 		param = pinconf_to_config_param(configs[i]);
 
 		switch (param) {
 		case PIN_CONFIG_BIAS_DISABLE:
-			dev_dbg(pc->dev, "pin %u: disable bias\n", pin);
-
-			meson_calc_reg_and_bit(bank, pin, REG_PULLEN, &reg,
-					       &bit);
-			ret = regmap_update_bits(pc->reg_pullen, reg,
-						 BIT(bit), 0);
+			ret = meson_pinconf_disable_bias(pc, pin);
 			if (ret)
 				return ret;
 			break;
 		case PIN_CONFIG_BIAS_PULL_UP:
-			dev_dbg(pc->dev, "pin %u: enable pull-up\n", pin);
-
-			meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
-					       &reg, &bit);
-			ret = regmap_update_bits(pc->reg_pullen, reg,
-						 BIT(bit), BIT(bit));
-			if (ret)
-				return ret;
-
-			meson_calc_reg_and_bit(bank, pin, REG_PULL, &reg, &bit);
-			ret = regmap_update_bits(pc->reg_pull, reg,
-						 BIT(bit), BIT(bit));
+			ret = meson_pinconf_enable_bias(pc, pin, true);
 			if (ret)
 				return ret;
 			break;
 		case PIN_CONFIG_BIAS_PULL_DOWN:
-			dev_dbg(pc->dev, "pin %u: enable pull-down\n", pin);
-
-			meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
-					       &reg, &bit);
-			ret = regmap_update_bits(pc->reg_pullen, reg,
-						 BIT(bit), BIT(bit));
-			if (ret)
-				return ret;
-
-			meson_calc_reg_and_bit(bank, pin, REG_PULL, &reg, &bit);
-			ret = regmap_update_bits(pc->reg_pull, reg,
-						 BIT(bit), 0);
+			ret = meson_pinconf_enable_bias(pc, pin, false);
 			if (ret)
 				return ret;
 			break;
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-09 16:29 [PATCH v4 0/6] Add drive-strength in Meson pinctrl driver Guillaume La Roque
2019-05-09 16:29 ` [PATCH v4 1/6] dt-bindings: pinctrl: add a 'drive-strength-microamp' property Guillaume La Roque
2019-05-09 17:35   ` Kevin Hilman
2019-05-09 16:29 ` [PATCH v4 2/6] pinctrl: generic: add new 'drive-strength-microamp' property support Guillaume La Roque
2019-05-09 16:29 ` [PATCH v4 3/6] dt-bindings: pinctrl: meson: Add drive-strength-microamp property Guillaume La Roque
2019-05-09 16:29 ` Guillaume La Roque [this message]
2019-05-09 16:29 ` [PATCH v4 5/6] pinctrl: meson: add support of drive-strength-microamp Guillaume La Roque
2019-05-09 16:29 ` [PATCH v4 6/6] pinctrl: meson: g12a: add DS bank value Guillaume La Roque
2019-05-09 17:34 ` [PATCH v4 0/6] Add drive-strength in Meson pinctrl driver Kevin Hilman

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190509162920.7054-5-glaroque@baylibre.com \
    --to=glaroque@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox