From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 1/2] arm64: dts: meson: sei510: consistently order nodes
Date: Fri, 10 May 2019 17:53:26 +0200 [thread overview]
Message-ID: <20190510155327.5759-2-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190510155327.5759-1-jbrunet@baylibre.com>
Like order boards, order nodes by address then node names then aliases.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../boot/dts/amlogic/meson-g12a-sei510.dts | 92 +++++++++----------
1 file changed, 46 insertions(+), 46 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 34b40587e5ef..61fb30047d7f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -14,10 +14,6 @@
compatible = "seirobotics,sei510", "amlogic,g12a";
model = "SEI Robotics SEI510";
- aliases {
- serial0 = &uart_AO;
- };
-
adc_keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
@@ -31,13 +27,8 @@
};
};
- ao_5v: regulator-ao_5v {
- compatible = "regulator-fixed";
- regulator-name = "AO_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
+ aliases {
+ serial0 = &uart_AO;
};
chosen {
@@ -54,23 +45,6 @@
};
};
- dc_in: regulator-dc_in {
- compatible = "regulator-fixed";
- regulator-name = "DC_IN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- emmc_1v8: regulator-emmc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "EMMC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
@@ -87,12 +61,30 @@
reg = <0x0 0x0 0x0 0x40000000>;
};
- reserved-memory {
- /* TEE Reserved Memory */
- bl32_reserved: bl32@5000000 {
- reg = <0x0 0x05300000 0x0 0x2000000>;
- no-map;
- };
+ ao_5v: regulator-ao_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "AO_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ dc_in: regulator-dc_in {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ emmc_1v8: regulator-emmc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
};
vddao_3v3: regulator-vddao_3v3 {
@@ -122,6 +114,14 @@
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
+
+ reserved-memory {
+ /* TEE Reserved Memory */
+ bl32_reserved: bl32@5000000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+ };
};
&cec_AO {
@@ -144,6 +144,18 @@
};
};
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&saradc {
status = "okay";
vref-supply = <&vddio_ao1v8>;
@@ -161,18 +173,6 @@
};
};
-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-05-10 15:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-10 15:53 [PATCH 0/2] arm64: dts: meson: g12a board node order Jerome Brunet
2019-05-10 15:53 ` Jerome Brunet [this message]
2019-05-10 21:43 ` [PATCH 1/2] arm64: dts: meson: sei510: consistently order nodes Kevin Hilman
2019-05-11 15:52 ` Jerome Brunet
2019-05-13 7:41 ` Neil Armstrong
2019-05-13 23:40 ` Kevin Hilman
2019-05-10 15:53 ` [PATCH 2/2] arm64: dts: meson: u200: " Jerome Brunet
2019-05-10 21:46 ` [PATCH 0/2] arm64: dts: meson: g12a board node order Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190510155327.5759-2-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).