* [PATCH v2 1/4] ARM: dts: meson8b: add the PWM_D output pin
2019-07-27 12:12 [PATCH v2 0/4] ARM: dts: meson8b: add VDDEE / mali-supply Martin Blumenstingl
@ 2019-07-27 12:12 ` Martin Blumenstingl
2019-07-27 12:12 ` [PATCH v2 2/4] ARM: dts: meson8b: ec100: add the VDDEE regulator Martin Blumenstingl
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Martin Blumenstingl @ 2019-07-27 12:12 UTC (permalink / raw)
To: linux-amlogic, khilman
Cc: Martin Blumenstingl, linux-kernel, linux-arm-kernel
The PWM_D output is used for the VDDEE PWM regulator which supplies for
example the Mali GPU on the EC-100 and Odroid-C1 boards. Add the output
pin the VDDEE regulators can be added.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm/boot/dts/meson8b.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index fba2c70c2fda..30fca9bb4bbe 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -361,6 +361,14 @@
};
};
+ pwm_d_pins: pwm-d {
+ mux {
+ groups = "pwm_d";
+ function = "pwm_d";
+ bias-disable;
+ };
+ };
+
uart_b0_pins: uart-b0 {
mux {
groups = "uart_tx_b0",
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/4] ARM: dts: meson8b: ec100: add the VDDEE regulator
2019-07-27 12:12 [PATCH v2 0/4] ARM: dts: meson8b: add VDDEE / mali-supply Martin Blumenstingl
2019-07-27 12:12 ` [PATCH v2 1/4] ARM: dts: meson8b: add the PWM_D output pin Martin Blumenstingl
@ 2019-07-27 12:12 ` Martin Blumenstingl
2019-07-27 12:12 ` [PATCH v2 3/4] ARM: dts: meson8b: odroidc1: " Martin Blumenstingl
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Martin Blumenstingl @ 2019-07-27 12:12 UTC (permalink / raw)
To: linux-amlogic, khilman
Cc: Martin Blumenstingl, linux-kernel, linux-arm-kernel
The VDDEE regulator is basically a copy of the VCCK regulator. VDDEE
supplies for example the Mali GPU and is controlled by PWM_D instead of
PWM_C.
Add the VDDEE PWM regulator and make it the supply of the Mali GPU.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm/boot/dts/meson8b-ec100.dts | 31 ++++++++++++++++++++++++++---
1 file changed, 28 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index 96d239d8334e..bed1dfef1985 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -219,6 +219,27 @@
*/
vin-supply = <&vcc_3v3>;
};
+
+ vddee: regulator-vddee {
+ /*
+ * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+ * Synchronous Step Down Regulator. Also called VDDAO
+ * in a part of the schematics.
+ */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDEE";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ vin-supply = <&vcc_5v>;
+
+ pwms = <&pwm_cd 1 1148 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&cpu0 {
@@ -269,6 +290,10 @@
};
};
+&mali {
+ mali-supply = <&vddee>;
+};
+
&saradc {
status = "okay";
vref-supply = <&vcc_1v8>;
@@ -350,10 +375,10 @@
&pwm_cd {
status = "okay";
- pinctrl-0 = <&pwm_c1_pins>;
+ pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_XTAL>;
- clock-names = "clkin0";
+ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+ clock-names = "clkin0", "clkin1";
};
&rtc {
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 3/4] ARM: dts: meson8b: odroidc1: add the VDDEE regulator
2019-07-27 12:12 [PATCH v2 0/4] ARM: dts: meson8b: add VDDEE / mali-supply Martin Blumenstingl
2019-07-27 12:12 ` [PATCH v2 1/4] ARM: dts: meson8b: add the PWM_D output pin Martin Blumenstingl
2019-07-27 12:12 ` [PATCH v2 2/4] ARM: dts: meson8b: ec100: add the VDDEE regulator Martin Blumenstingl
@ 2019-07-27 12:12 ` Martin Blumenstingl
2019-07-27 12:12 ` [PATCH v2 4/4] ARM: dts: meson8b: mxq: " Martin Blumenstingl
2019-08-05 21:16 ` [PATCH v2 0/4] ARM: dts: meson8b: add VDDEE / mali-supply Kevin Hilman
4 siblings, 0 replies; 6+ messages in thread
From: Martin Blumenstingl @ 2019-07-27 12:12 UTC (permalink / raw)
To: linux-amlogic, khilman
Cc: Martin Blumenstingl, linux-kernel, linux-arm-kernel
The VDDEE regulator is basically a copy of the VCCK regulator. VDDEE
supplies for example the Mali GPU and is controlled by PWM_D instead of
PWM_C.
Add the VDDEE PWM regulator and make it the supply of the Mali GPU.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm/boot/dts/meson8b-odroidc1.dts | 27 +++++++++++++++++++++++---
1 file changed, 24 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 86c4614e0a38..90f66dc45115 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -154,6 +154,23 @@
vin-supply = <&p5v0>;
};
+ vddee: regulator-vddee {
+ /* Monolithic Power Systems MP2161 */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDEE";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ vin-supply = <&p5v0>;
+
+ pwms = <&pwm_cd 1 12218 0>;
+ pwm-dutycycle-range = <91 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vdd_rtc: regulator-vdd-rtc {
/*
* Torex Semiconductor XC6215 configured for a fixed output of
@@ -276,6 +293,10 @@
pinctrl-names = "default";
};
+&mali {
+ mali-supply = <&vddee>;
+};
+
&saradc {
status = "okay";
vref-supply = <&vcc_1v8>;
@@ -308,10 +329,10 @@
&pwm_cd {
status = "okay";
- pinctrl-0 = <&pwm_c1_pins>;
+ pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_XTAL>;
- clock-names = "clkin0";
+ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+ clock-names = "clkin0", "clkin1";
};
&rtc {
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 4/4] ARM: dts: meson8b: mxq: add the VDDEE regulator
2019-07-27 12:12 [PATCH v2 0/4] ARM: dts: meson8b: add VDDEE / mali-supply Martin Blumenstingl
` (2 preceding siblings ...)
2019-07-27 12:12 ` [PATCH v2 3/4] ARM: dts: meson8b: odroidc1: " Martin Blumenstingl
@ 2019-07-27 12:12 ` Martin Blumenstingl
2019-08-05 21:16 ` [PATCH v2 0/4] ARM: dts: meson8b: add VDDEE / mali-supply Kevin Hilman
4 siblings, 0 replies; 6+ messages in thread
From: Martin Blumenstingl @ 2019-07-27 12:12 UTC (permalink / raw)
To: linux-amlogic, khilman
Cc: Martin Blumenstingl, linux-kernel, linux-arm-kernel
The VDDEE regulator is basically a copy of the VCCK regulator. VDDEE
supplies for example the Mali GPU and is controlled by PWM_D instead of
PWM_C.
Add the VDDEE PWM regulator and make it the supply of the Mali GPU.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm/boot/dts/meson8b-mxq.dts | 26 +++++++++++++++++++++++---
1 file changed, 23 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index bb27b34eb346..6e39ad52e42d 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -76,6 +76,22 @@
regulator-boot-on;
regulator-always-on;
};
+
+ vddee: regulator-vddee {
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDEE";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ vin-supply = <&vcc_5v>;
+
+ pwms = <&pwm_cd 1 1148 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&cpu0 {
@@ -112,6 +128,10 @@
};
};
+&mali {
+ mali-supply = <&vddee>;
+};
+
&saradc {
status = "okay";
vref-supply = <&vcc_1v8>;
@@ -143,10 +163,10 @@
&pwm_cd {
status = "okay";
- pinctrl-0 = <&pwm_c1_pins>;
+ pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_XTAL>;
- clock-names = "clkin0";
+ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+ clock-names = "clkin0", "clkin1";
};
&uart_AO {
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 0/4] ARM: dts: meson8b: add VDDEE / mali-supply
2019-07-27 12:12 [PATCH v2 0/4] ARM: dts: meson8b: add VDDEE / mali-supply Martin Blumenstingl
` (3 preceding siblings ...)
2019-07-27 12:12 ` [PATCH v2 4/4] ARM: dts: meson8b: mxq: " Martin Blumenstingl
@ 2019-08-05 21:16 ` Kevin Hilman
4 siblings, 0 replies; 6+ messages in thread
From: Kevin Hilman @ 2019-08-05 21:16 UTC (permalink / raw)
To: Martin Blumenstingl, linux-amlogic
Cc: Martin Blumenstingl, linux-kernel, linux-arm-kernel
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> EC-100 and Odroid-C1 use a "copy" of the VCCK regulator as "VDDEE"
> regulator. VDDEE supplies the Mali GPU and various other bits within
> the SoC.
>
> The VDDEE regulator is not exclusive to the Mali GPU so it must not
> change it's voltage. The GPU OPP table has a fixed voltage for all
> frequencies of 1.10V. This matches with what u-boot sets on my EC-100
> and Odroid-C1.
Series queued for v5.4,
Thanks,
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 6+ messages in thread