* [PATCH 00/58] serial/sysrq: Cleanup ifdeffery
@ 2019-12-13 0:05 Dmitry Safonov
2019-12-13 0:06 ` [PATCH 21/58] tty/serial: Migrate meson_uart to use has_sysrq Dmitry Safonov
2019-12-13 5:47 ` [PATCH 00/58] serial/sysrq: Cleanup ifdeffery Christophe Leroy
0 siblings, 2 replies; 4+ messages in thread
From: Dmitry Safonov @ 2019-12-13 0:05 UTC (permalink / raw)
To: linux-kernel
Cc: Alexandre Belloni, linux-aspeed, Benjamin Herrenschmidt,
Dmitry Safonov, Bjorn Andersson, Paul Mackerras,
Maciej W. Rozycki, sparclinux, Shawn Guo, Fabio Estevam,
linux-stm32, Kees Cook, Vasiliy Khoruzhick, Alexander Shiyan,
Dmitry Safonov, Michael Ellerman, Russell King,
Ludovic Desroches, Andy Gross, bcm-kernel-feedback-list,
Joel Stanley, linux-serial, Jiri Slaby, Orson Zhai, Iurii Zaikin,
Kevin Hilman, NXP Linux Team, Michal Simek, Alexandre Torgue,
linux-arm-msm, Sascha Hauer, Uwe Kleine-König, Johan Hovold,
linux-fsdevel, Florian Fainelli, Chunyan Zhang, linux-amlogic,
linux-arm-kernel, Maxime Coquelin, Timur Tabi, Andrew Jeffery,
Greg Kroah-Hartman, Patrice Chotard, Tony Prisk, Richard Genoud,
Luis Chamberlain, Pengutronix Kernel Team, Vineet Gupta,
Baolin Wang, linuxppc-dev, David S. Miller
The original purpose of the patches set was to add a way to enable
sysrq on a uart where currently it can be constantly either on or off
(CONFIG_MAGIC_SYSRQ_SERIAL), see the last patch:
"serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE"
But to do that, I had to add uart_try_toggle_sysrq() and I didn't want
to bloat serial_core.h even more. So, I did cleanup by removing
SUPPORT_SYSRQ resulting in a nice diff-stat and lesser ifdeffery.
Most patches are one-liners, I decided to keep them separated per-driver
to let reviewers easier follow the purpose.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Vasiliy Khoruzhick <vasilykh@arista.com>
Cc: linux-serial@vger.kernel.org
Dmitry Safonov (58):
sysrq: Remove sysrq_handler_registered
serial: Move sysrq members above
serial_core: Un-ifdef sysrq SUPPORT_SYSRQ
tty/serial: Migrate aspeed_vuart to use has_sysrq
tty/serial: Migrate 8250_fsl to use has_sysrq
tty/serial: Migrate bcm63xx_uart to use has_sysrq
tty/serial: Migrate 8250_omap to use has_sysrq
tty/serial: Migrate 8250_port to use has_sysrq
tty/serial: Migrate amba-pl01* to use has_sysrq
tty/serial: Migrate apbuart to use has_sysrq
tty/serial: Migrate arc_uart to use has_sysrq
tty/serial: Migrate atmel_serial to use has_sysrq
tty/serial: Migrate clps711x to use has_sysrq
tty/serial: Migrate cpm_uart to use has_sysrq
tty/serial: Migrate dz to use has_sysrq
tty/serial: Migrate efm32-uart to use has_sysrq
tty/serial: Migrate fsl_linflexuart to use has_sysrq
tty/serial: Migrate fsl_lpuart to use has_sysrq
tty/serial: Migrate imx to use has_sysrq
tty/serial: Migrate ip22zilog to use has_sysrq
tty/serial: Migrate meson_uart to use has_sysrq
tty/serial: Migrate milbeaut_usio to use has_sysrq
tty/serial: Migrate mpc52xx_uart to use has_sysrq
tty/serial: Don't zero port->sysrq
tty/serial: Migrate msm_serial to use has_sysrq
tty/serial: Migrate mux to use has_sysrq
tty/serial: Migrate mxs-auart to use has_sysrq
tty/serial: Migrate omap-serial to use has_sysrq
tty/serial: Migrate pch_uart to use has_sysrq
tty/serial: Don't check port->sysrq
tty/serial: Migrate pmac_zilog to use has_sysrq
tty/serial: Migrate pnx8xxx_uart to use has_sysrq
serial/f81534: Don't check port->sysrq
tty/serial: Migrate pxa to use has_sysrq
tty/serial: Migrate qcom_geni_serial to use has_sysrq
tty/serial: Migrate sa1100 to use has_sysrq
tty/serial: Migrate samsung_tty to use has_sysrq
tty/serial: Migrate sb1250-duart to use has_sysrq
tty/serial: Migrate sccnxp to use has_sysrq
tty/serial: Migrate serial_txx9 to use has_sysrq
tty/serial: Migrate sh-sci to use has_sysrq
tty/serial: Migrate sprd_serial to use has_sysrq
tty/serial: Migrate st-asc to use has_sysrq
tty/serial: Migrate stm32-usart to use has_sysrq
tty/serial: Migrate sunhv to use has_sysrq
tty/serial: Migrate sunsab to use has_sysrq
tty/serial: Migrate sunsu to use has_sysrq
tty/serial: Migrate sunzilog to use has_sysrq
serial/ucc_uart: Remove ifdef SUPPORT_SYSRQ
tty/serial: Migrate vr41xx_siu to use has_sysrq
tty/serial: Migrate vt8500_serial to use has_sysrq
tty/serial: Migrate xilinx_uartps to use has_sysrq
tty/serial: Migrate zs to use has_sysrq
serial_core: Remove SUPPORT_SYSRQ ifdeffery
usb/serial: Don't handle break when CONFIG_MAGIC_SYSRQ is disabled
serial_core: Move sysrq functions from header file
sysctl/sysrq: Remove __sysrq_enabled copy
serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
arch/powerpc/kernel/legacy_serial.c | 4 +-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 5 +-
drivers/tty/serial/8250/8250_fsl.c | 4 -
drivers/tty/serial/8250/8250_of.c | 4 +-
drivers/tty/serial/8250/8250_omap.c | 5 +-
drivers/tty/serial/8250/8250_port.c | 5 +-
drivers/tty/serial/amba-pl010.c | 5 +-
drivers/tty/serial/amba-pl011.c | 6 +-
drivers/tty/serial/apbuart.c | 5 +-
drivers/tty/serial/arc_uart.c | 5 +-
drivers/tty/serial/atmel_serial.c | 9 +-
drivers/tty/serial/bcm63xx_uart.c | 5 +-
drivers/tty/serial/clps711x.c | 5 +-
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 9 +-
drivers/tty/serial/dz.c | 5 +-
drivers/tty/serial/efm32-uart.c | 5 +-
drivers/tty/serial/fsl_linflexuart.c | 8 +-
drivers/tty/serial/fsl_lpuart.c | 9 +-
drivers/tty/serial/imx.c | 7 +-
drivers/tty/serial/ip22zilog.c | 7 +-
drivers/tty/serial/meson_uart.c | 5 +-
drivers/tty/serial/milbeaut_usio.c | 5 +-
drivers/tty/serial/mpc52xx_uart.c | 11 +-
drivers/tty/serial/msm_serial.c | 5 +-
drivers/tty/serial/mux.c | 5 +-
drivers/tty/serial/mxs-auart.c | 5 +-
drivers/tty/serial/omap-serial.c | 5 +-
drivers/tty/serial/pch_uart.c | 12 +-
drivers/tty/serial/pmac_zilog.c | 5 +-
drivers/tty/serial/pnx8xxx_uart.c | 7 +-
drivers/tty/serial/pxa.c | 5 +-
drivers/tty/serial/qcom_geni_serial.c | 5 +-
drivers/tty/serial/sa1100.c | 7 +-
drivers/tty/serial/samsung_tty.c | 5 +-
drivers/tty/serial/sb1250-duart.c | 5 +-
drivers/tty/serial/sccnxp.c | 5 +-
drivers/tty/serial/serial_core.c | 123 ++++++++++++++++++++
drivers/tty/serial/serial_txx9.c | 5 +-
drivers/tty/serial/sh-sci.c | 10 +-
drivers/tty/serial/sprd_serial.c | 5 +-
drivers/tty/serial/st-asc.c | 5 +-
drivers/tty/serial/stm32-usart.c | 5 +-
drivers/tty/serial/sunhv.c | 5 +-
drivers/tty/serial/sunsab.c | 5 +-
drivers/tty/serial/sunsu.c | 5 +-
drivers/tty/serial/sunzilog.c | 6 +-
drivers/tty/serial/ucc_uart.c | 2 -
drivers/tty/serial/vr41xx_siu.c | 5 +-
drivers/tty/serial/vt8500_serial.c | 5 +-
drivers/tty/serial/xilinx_uartps.c | 5 +-
drivers/tty/serial/zs.c | 5 +-
drivers/tty/sysrq.c | 16 +--
drivers/usb/serial/f81534.c | 6 +-
drivers/usb/serial/generic.c | 10 +-
include/linux/serial_core.h | 92 ++-------------
include/linux/sysrq.h | 1 +
kernel/sysctl.c | 41 ++++---
lib/Kconfig.debug | 8 ++
58 files changed, 238 insertions(+), 346 deletions(-)
--
2.24.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 21/58] tty/serial: Migrate meson_uart to use has_sysrq
2019-12-13 0:05 [PATCH 00/58] serial/sysrq: Cleanup ifdeffery Dmitry Safonov
@ 2019-12-13 0:06 ` Dmitry Safonov
2019-12-13 5:47 ` [PATCH 00/58] serial/sysrq: Cleanup ifdeffery Christophe Leroy
1 sibling, 0 replies; 4+ messages in thread
From: Dmitry Safonov @ 2019-12-13 0:06 UTC (permalink / raw)
To: linux-kernel
Cc: Vasiliy Khoruzhick, Dmitry Safonov, Greg Kroah-Hartman,
Dmitry Safonov, Kevin Hilman, linux-serial, Jiri Slaby,
linux-amlogic, linux-arm-kernel
The SUPPORT_SYSRQ ifdeffery is not nice as:
- May create misunderstanding about sizeof(struct uart_port) between
different objects
- Prevents moving functions from serial_core.h
- Reduces readability (well, it's ifdeffery - it's hard to follow)
In order to remove SUPPORT_SYSRQ, has_sysrq variable has been added.
Initialise it in driver's probe and remove ifdeffery.
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
---
drivers/tty/serial/meson_uart.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index fbc5bc022a39..12e15358554c 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -5,10 +5,6 @@
* Copyright (C) 2014 Carlo Caione <carlo@caione.org>
*/
-#if defined(CONFIG_SERIAL_MESON_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
#include <linux/clk.h>
#include <linux/console.h>
#include <linux/delay.h>
@@ -703,6 +699,7 @@ static int meson_uart_probe(struct platform_device *pdev)
port->mapsize = resource_size(res_mem);
port->irq = res_irq->start;
port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY;
+ port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MESON_CONSOLE);
port->dev = &pdev->dev;
port->line = pdev->id;
port->type = PORT_MESON;
--
2.24.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 00/58] serial/sysrq: Cleanup ifdeffery
2019-12-13 0:05 [PATCH 00/58] serial/sysrq: Cleanup ifdeffery Dmitry Safonov
2019-12-13 0:06 ` [PATCH 21/58] tty/serial: Migrate meson_uart to use has_sysrq Dmitry Safonov
@ 2019-12-13 5:47 ` Christophe Leroy
2019-12-13 16:41 ` Dmitry Safonov
1 sibling, 1 reply; 4+ messages in thread
From: Christophe Leroy @ 2019-12-13 5:47 UTC (permalink / raw)
To: Dmitry Safonov, linux-kernel
Cc: Alexandre Belloni, linux-aspeed, Dmitry Safonov, Bjorn Andersson,
Paul Mackerras, Maciej W. Rozycki, sparclinux, Fabio Estevam,
linux-stm32, Alexandre Torgue, Vasiliy Khoruzhick,
Alexander Shiyan, Kevin Hilman, Russell King, Ludovic Desroches,
Andy Gross, bcm-kernel-feedback-list, Joel Stanley, linux-serial,
Jiri Slaby, Orson Zhai, Iurii Zaikin, NXP Linux Team,
Michal Simek, Kees Cook, linux-arm-msm, Sascha Hauer,
Uwe Kleine-König, Johan Hovold, Baolin Wang,
Florian Fainelli, linux-amlogic, Pengutronix Kernel Team,
linux-arm-kernel, Timur Tabi, Andrew Jeffery, Greg Kroah-Hartman,
linuxppc-dev, Patrice Chotard, Tony Prisk, Richard Genoud,
Luis Chamberlain, Vineet Gupta, Maxime Coquelin, Chunyan Zhang,
linux-fsdevel, Shawn Guo, David S. Miller
Le 13/12/2019 à 01:05, Dmitry Safonov a écrit :
> The original purpose of the patches set was to add a way to enable
> sysrq on a uart where currently it can be constantly either on or off
> (CONFIG_MAGIC_SYSRQ_SERIAL), see the last patch:
> "serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE"
>
> But to do that, I had to add uart_try_toggle_sysrq() and I didn't want
> to bloat serial_core.h even more. So, I did cleanup by removing
> SUPPORT_SYSRQ resulting in a nice diff-stat and lesser ifdeffery.
>
> Most patches are one-liners, I decided to keep them separated per-driver
> to let reviewers easier follow the purpose.
>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Jiri Slaby <jslaby@suse.com>
> Cc: Vasiliy Khoruzhick <vasilykh@arista.com>
> Cc: linux-serial@vger.kernel.org
>
> Dmitry Safonov (58):
> sysrq: Remove sysrq_handler_registered
> serial: Move sysrq members above
> serial_core: Un-ifdef sysrq SUPPORT_SYSRQ
> tty/serial: Migrate aspeed_vuart to use has_sysrq
> tty/serial: Migrate 8250_fsl to use has_sysrq
> tty/serial: Migrate bcm63xx_uart to use has_sysrq
> tty/serial: Migrate 8250_omap to use has_sysrq
> tty/serial: Migrate 8250_port to use has_sysrq
> tty/serial: Migrate amba-pl01* to use has_sysrq
> tty/serial: Migrate apbuart to use has_sysrq
> tty/serial: Migrate arc_uart to use has_sysrq
> tty/serial: Migrate atmel_serial to use has_sysrq
> tty/serial: Migrate clps711x to use has_sysrq
> tty/serial: Migrate cpm_uart to use has_sysrq
> tty/serial: Migrate dz to use has_sysrq
> tty/serial: Migrate efm32-uart to use has_sysrq
> tty/serial: Migrate fsl_linflexuart to use has_sysrq
> tty/serial: Migrate fsl_lpuart to use has_sysrq
> tty/serial: Migrate imx to use has_sysrq
> tty/serial: Migrate ip22zilog to use has_sysrq
> tty/serial: Migrate meson_uart to use has_sysrq
> tty/serial: Migrate milbeaut_usio to use has_sysrq
> tty/serial: Migrate mpc52xx_uart to use has_sysrq
> tty/serial: Don't zero port->sysrq
> tty/serial: Migrate msm_serial to use has_sysrq
> tty/serial: Migrate mux to use has_sysrq
> tty/serial: Migrate mxs-auart to use has_sysrq
> tty/serial: Migrate omap-serial to use has_sysrq
> tty/serial: Migrate pch_uart to use has_sysrq
> tty/serial: Don't check port->sysrq
> tty/serial: Migrate pmac_zilog to use has_sysrq
> tty/serial: Migrate pnx8xxx_uart to use has_sysrq
> serial/f81534: Don't check port->sysrq
> tty/serial: Migrate pxa to use has_sysrq
> tty/serial: Migrate qcom_geni_serial to use has_sysrq
> tty/serial: Migrate sa1100 to use has_sysrq
> tty/serial: Migrate samsung_tty to use has_sysrq
> tty/serial: Migrate sb1250-duart to use has_sysrq
> tty/serial: Migrate sccnxp to use has_sysrq
> tty/serial: Migrate serial_txx9 to use has_sysrq
> tty/serial: Migrate sh-sci to use has_sysrq
> tty/serial: Migrate sprd_serial to use has_sysrq
> tty/serial: Migrate st-asc to use has_sysrq
> tty/serial: Migrate stm32-usart to use has_sysrq
> tty/serial: Migrate sunhv to use has_sysrq
> tty/serial: Migrate sunsab to use has_sysrq
> tty/serial: Migrate sunsu to use has_sysrq
> tty/serial: Migrate sunzilog to use has_sysrq
> serial/ucc_uart: Remove ifdef SUPPORT_SYSRQ
> tty/serial: Migrate vr41xx_siu to use has_sysrq
> tty/serial: Migrate vt8500_serial to use has_sysrq
> tty/serial: Migrate xilinx_uartps to use has_sysrq
> tty/serial: Migrate zs to use has_sysrq
> serial_core: Remove SUPPORT_SYSRQ ifdeffery
> usb/serial: Don't handle break when CONFIG_MAGIC_SYSRQ is disabled
> serial_core: Move sysrq functions from header file
> sysctl/sysrq: Remove __sysrq_enabled copy
> serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
powerpc patchwork didn't get the full series, see
https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=148198
Can't find them on linux-serial patchwork either
(https://patches.linaro.org/project/linux-serial/list/)
It is impossible to review/test powerpc bits without the first patches
of the series, where can the entire series be found ?
Christophe
>
> arch/powerpc/kernel/legacy_serial.c | 4 +-
> drivers/tty/serial/8250/8250_aspeed_vuart.c | 5 +-
> drivers/tty/serial/8250/8250_fsl.c | 4 -
> drivers/tty/serial/8250/8250_of.c | 4 +-
> drivers/tty/serial/8250/8250_omap.c | 5 +-
> drivers/tty/serial/8250/8250_port.c | 5 +-
> drivers/tty/serial/amba-pl010.c | 5 +-
> drivers/tty/serial/amba-pl011.c | 6 +-
> drivers/tty/serial/apbuart.c | 5 +-
> drivers/tty/serial/arc_uart.c | 5 +-
> drivers/tty/serial/atmel_serial.c | 9 +-
> drivers/tty/serial/bcm63xx_uart.c | 5 +-
> drivers/tty/serial/clps711x.c | 5 +-
> drivers/tty/serial/cpm_uart/cpm_uart_core.c | 9 +-
> drivers/tty/serial/dz.c | 5 +-
> drivers/tty/serial/efm32-uart.c | 5 +-
> drivers/tty/serial/fsl_linflexuart.c | 8 +-
> drivers/tty/serial/fsl_lpuart.c | 9 +-
> drivers/tty/serial/imx.c | 7 +-
> drivers/tty/serial/ip22zilog.c | 7 +-
> drivers/tty/serial/meson_uart.c | 5 +-
> drivers/tty/serial/milbeaut_usio.c | 5 +-
> drivers/tty/serial/mpc52xx_uart.c | 11 +-
> drivers/tty/serial/msm_serial.c | 5 +-
> drivers/tty/serial/mux.c | 5 +-
> drivers/tty/serial/mxs-auart.c | 5 +-
> drivers/tty/serial/omap-serial.c | 5 +-
> drivers/tty/serial/pch_uart.c | 12 +-
> drivers/tty/serial/pmac_zilog.c | 5 +-
> drivers/tty/serial/pnx8xxx_uart.c | 7 +-
> drivers/tty/serial/pxa.c | 5 +-
> drivers/tty/serial/qcom_geni_serial.c | 5 +-
> drivers/tty/serial/sa1100.c | 7 +-
> drivers/tty/serial/samsung_tty.c | 5 +-
> drivers/tty/serial/sb1250-duart.c | 5 +-
> drivers/tty/serial/sccnxp.c | 5 +-
> drivers/tty/serial/serial_core.c | 123 ++++++++++++++++++++
> drivers/tty/serial/serial_txx9.c | 5 +-
> drivers/tty/serial/sh-sci.c | 10 +-
> drivers/tty/serial/sprd_serial.c | 5 +-
> drivers/tty/serial/st-asc.c | 5 +-
> drivers/tty/serial/stm32-usart.c | 5 +-
> drivers/tty/serial/sunhv.c | 5 +-
> drivers/tty/serial/sunsab.c | 5 +-
> drivers/tty/serial/sunsu.c | 5 +-
> drivers/tty/serial/sunzilog.c | 6 +-
> drivers/tty/serial/ucc_uart.c | 2 -
> drivers/tty/serial/vr41xx_siu.c | 5 +-
> drivers/tty/serial/vt8500_serial.c | 5 +-
> drivers/tty/serial/xilinx_uartps.c | 5 +-
> drivers/tty/serial/zs.c | 5 +-
> drivers/tty/sysrq.c | 16 +--
> drivers/usb/serial/f81534.c | 6 +-
> drivers/usb/serial/generic.c | 10 +-
> include/linux/serial_core.h | 92 ++-------------
> include/linux/sysrq.h | 1 +
> kernel/sysctl.c | 41 ++++---
> lib/Kconfig.debug | 8 ++
> 58 files changed, 238 insertions(+), 346 deletions(-)
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 00/58] serial/sysrq: Cleanup ifdeffery
2019-12-13 5:47 ` [PATCH 00/58] serial/sysrq: Cleanup ifdeffery Christophe Leroy
@ 2019-12-13 16:41 ` Dmitry Safonov
0 siblings, 0 replies; 4+ messages in thread
From: Dmitry Safonov @ 2019-12-13 16:41 UTC (permalink / raw)
To: Christophe Leroy, linux-kernel
Cc: Alexandre Belloni, linux-aspeed, Dmitry Safonov, Bjorn Andersson,
Paul Mackerras, Maciej W. Rozycki, sparclinux, Fabio Estevam,
linux-stm32, Alexandre Torgue, Vasiliy Khoruzhick,
Alexander Shiyan, Kevin Hilman, Russell King, Ludovic Desroches,
Andy Gross, bcm-kernel-feedback-list, Joel Stanley, linux-serial,
Jiri Slaby, Orson Zhai, Iurii Zaikin, NXP Linux Team,
Michal Simek, Kees Cook, linux-arm-msm, Sascha Hauer,
Uwe Kleine-König, Johan Hovold, Baolin Wang,
Florian Fainelli, linux-amlogic, Pengutronix Kernel Team,
linux-arm-kernel, Timur Tabi, Andrew Jeffery, Greg Kroah-Hartman,
linuxppc-dev, Patrice Chotard, Tony Prisk, Richard Genoud,
Luis Chamberlain, Vineet Gupta, Maxime Coquelin, Chunyan Zhang,
linux-fsdevel, Shawn Guo, David S. Miller
Hi Christophe,
On 12/13/19 5:47 AM, Christophe Leroy wrote:
> Le 13/12/2019 à 01:05, Dmitry Safonov a écrit :
[..]
>
> powerpc patchwork didn't get the full series, see
> https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=148198
Yes, I was under impression that architecture mail-lists want related
patches. But now I see that from the patchwork point of view it's better
to have the whole series in inbox.
> Can't find them on linux-serial patchwork either
> (https://patches.linaro.org/project/linux-serial/list/)
I'm not sure - maybe the frequency of checking is low?
I see all patches in linux-serial ml:
https://marc.info/?l=linux-serial&r=1&b=201912&w=2
> It is impossible to review/test powerpc bits without the first patches
> of the series, where can the entire series be found ?
Sorry for the inconvenience.
I can resend without Cc'ing all people just to ppc mail-list if that
works for you. Or you can clone it directly from my github:
https://github.com/0x7f454c46/linux/tree/sysrq-serial-seq-v1
Thanks,
Dmitry
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-12-13 22:24 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-13 0:05 [PATCH 00/58] serial/sysrq: Cleanup ifdeffery Dmitry Safonov
2019-12-13 0:06 ` [PATCH 21/58] tty/serial: Migrate meson_uart to use has_sysrq Dmitry Safonov
2019-12-13 5:47 ` [PATCH 00/58] serial/sysrq: Cleanup ifdeffery Christophe Leroy
2019-12-13 16:41 ` Dmitry Safonov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).