* [PATCH AUTOSEL 4.19 050/671] pinctrl: meson-gxl: remove invalid GPIOX tsin_a pins
[not found] <20200116165502.8838-1-sashal@kernel.org>
@ 2020-01-16 16:44 ` Sasha Levin
2020-01-16 16:44 ` [PATCH AUTOSEL 4.19 057/671] arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply Sasha Levin
1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2020-01-16 16:44 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, Neil Armstrong, Linus Walleij, linux-gpio,
linux-amlogic, linux-arm-kernel
From: Neil Armstrong <narmstrong@baylibre.com>
[ Upstream commit d801064cb871806e6843738ecad38993646f53f7 ]
The GPIOX tsin_a pins wrongly uses the SDCard pinctrl bits, this
patch completely removes these pins entries until we find out what
are the correct bits and registers to be used instead.
Fixes: 5a6ae9b80139 ("pinctrl: meson-gxl: add tsin_a pins")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/meson/pinctrl-meson-gxl.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 158f618f1695..0c0a5018102b 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -239,13 +239,9 @@ static const unsigned int eth_link_led_pins[] = { GPIOZ_14 };
static const unsigned int eth_act_led_pins[] = { GPIOZ_15 };
static const unsigned int tsin_a_d0_pins[] = { GPIODV_0 };
-static const unsigned int tsin_a_d0_x_pins[] = { GPIOX_10 };
static const unsigned int tsin_a_clk_pins[] = { GPIODV_8 };
-static const unsigned int tsin_a_clk_x_pins[] = { GPIOX_11 };
static const unsigned int tsin_a_sop_pins[] = { GPIODV_9 };
-static const unsigned int tsin_a_sop_x_pins[] = { GPIOX_8 };
static const unsigned int tsin_a_d_valid_pins[] = { GPIODV_10 };
-static const unsigned int tsin_a_d_valid_x_pins[] = { GPIOX_9 };
static const unsigned int tsin_a_fail_pins[] = { GPIODV_11 };
static const unsigned int tsin_a_dp_pins[] = {
GPIODV_1, GPIODV_2, GPIODV_3, GPIODV_4, GPIODV_5, GPIODV_6, GPIODV_7,
@@ -432,10 +428,6 @@ static struct meson_pmx_group meson_gxl_periphs_groups[] = {
GROUP(spi_miso, 5, 2),
GROUP(spi_ss0, 5, 1),
GROUP(spi_sclk, 5, 0),
- GROUP(tsin_a_sop_x, 6, 3),
- GROUP(tsin_a_d_valid_x, 6, 2),
- GROUP(tsin_a_d0_x, 6, 1),
- GROUP(tsin_a_clk_x, 6, 0),
/* Bank Z */
GROUP(eth_mdio, 4, 23),
@@ -698,8 +690,8 @@ static const char * const eth_led_groups[] = {
};
static const char * const tsin_a_groups[] = {
- "tsin_a_clk", "tsin_a_clk_x", "tsin_a_sop", "tsin_a_sop_x",
- "tsin_a_d_valid", "tsin_a_d_valid_x", "tsin_a_d0", "tsin_a_d0_x",
+ "tsin_a_clk", "tsin_a_sop",
+ "tsin_a_d_valid", "tsin_a_d0",
"tsin_a_dp", "tsin_a_fail",
};
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH AUTOSEL 4.19 057/671] arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
[not found] <20200116165502.8838-1-sashal@kernel.org>
2020-01-16 16:44 ` [PATCH AUTOSEL 4.19 050/671] pinctrl: meson-gxl: remove invalid GPIOX tsin_a pins Sasha Levin
@ 2020-01-16 16:44 ` Sasha Levin
1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2020-01-16 16:44 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, devicetree, Neil Armstrong, Kevin Hilman,
linux-amlogic, linux-arm-kernel
From: Neil Armstrong <narmstrong@baylibre.com>
[ Upstream commit e1f2163deac059ad39f07aba9e314ebe605d5a7a ]
The hdmi_5v regulator must be enabled to provide power to the physical HDMI
PHY and enables the HDMI 5V presence loopback for the monitor.
Fixes: b409f625a6d5 ("ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 1 +
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 1 +
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 1 +
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 1 +
5 files changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 765247bc4f24..e14e0ce7e89f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -125,6 +125,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&hdmi_5v>;
};
&hdmi_tx_tmds_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 864ef0111b01..a589547fc6e3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -78,6 +78,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&hdmi_5v>;
};
&hdmi_tx_tmds_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index b4dfb9afdef8..db293440e4ca 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -155,6 +155,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&hdmi_5v>;
};
&hdmi_tx_tmds_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 5896e8a5d86b..2602940c2077 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -51,6 +51,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&hdmi_5v>;
};
&hdmi_tx_tmds_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 313f88f8759e..782e9edac805 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -271,6 +271,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&hdmi_5v>;
};
&hdmi_tx_tmds_port {
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 2+ messages in thread