Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH AUTOSEL 5.7 021/388] arm64: dts: meson-gxbb-kii-pro: fix board compatible
       [not found] <20200618010805.600873-1-sashal@kernel.org>
@ 2020-06-18  1:01 ` Sasha Levin
  2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 024/388] arm64: dts: meson: fixup SCP sram nodes Sasha Levin
                   ` (12 subsequent siblings)
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:01 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, Neil Armstrong, Kevin Hilman,
	linux-amlogic, linux-arm-kernel

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit d120b5f98031eefc22164ae8c6ea3711e7a04c19 ]

Remove the uneeded "amlogic,p201", "amlogic,s905" in the board compatible list.

It fixes:
meson-gxbb-kii-pro.dt.yaml: /: compatible: ['videostrong,kii-pro', 'amlogic,p201', 'amlogic,s905', 'amlogic,meson-gxbb'] is not valid under any of the given schemas

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200326165958.19274-5-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 6c9cc45fb417..e8394a8269ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -11,7 +11,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 / {
-	compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb";
+	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
 	model = "Videostrong KII Pro";
 
 	leds {
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 024/388] arm64: dts: meson: fixup SCP sram nodes
       [not found] <20200618010805.600873-1-sashal@kernel.org>
  2020-06-18  1:01 ` [PATCH AUTOSEL 5.7 021/388] arm64: dts: meson-gxbb-kii-pro: fix board compatible Sasha Levin
@ 2020-06-18  1:02 ` Sasha Levin
  2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 094/388] ASoC: meson: fix memory leak of links if allocation of ldata fails Sasha Levin
                   ` (11 subsequent siblings)
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:02 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, Neil Armstrong, Kevin Hilman,
	linux-amlogic, linux-arm-kernel

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 9ecded10b4b6af238da0c86197b0418912e7513e ]

The GX and AXG SCP sram nodes were using invalid compatible and
node names for the sram entries.

Fixup the sram entries node names, and use proper compatible for them.

It notably fixes:
sram@c8000000: 'scp-shmem@0', 'scp-shmem@200' do not match any of the regexes: '^([a-z]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+'

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200326165958.19274-3-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi |  6 +++---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi  | 10 +++++-----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index aace3d32a3df..8e6281c685fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1735,18 +1735,18 @@ sd_emmc_c: mmc@7000 {
 		};
 
 		sram: sram@fffc0000 {
-			compatible = "amlogic,meson-axg-sram", "mmio-sram";
+			compatible = "mmio-sram";
 			reg = <0x0 0xfffc0000 0x0 0x20000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x0 0xfffc0000 0x20000>;
 
-			cpu_scp_lpri: scp-shmem@13000 {
+			cpu_scp_lpri: scp-sram@13000 {
 				compatible = "amlogic,meson-axg-scp-shmem";
 				reg = <0x13000 0x400>;
 			};
 
-			cpu_scp_hpri: scp-shmem@13400 {
+			cpu_scp_hpri: scp-sram@13400 {
 				compatible = "amlogic,meson-axg-scp-shmem";
 				reg = <0x13400 0x400>;
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 03f79fe045b7..e2bb68ec8502 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -398,20 +398,20 @@ gic: interrupt-controller@c4301000 {
 		};
 
 		sram: sram@c8000000 {
-			compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
+			compatible = "mmio-sram";
 			reg = <0x0 0xc8000000 0x0 0x14000>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x0 0xc8000000 0x14000>;
 
-			cpu_scp_lpri: scp-shmem@0 {
-				compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
+			cpu_scp_lpri: scp-sram@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
 				reg = <0x13000 0x400>;
 			};
 
-			cpu_scp_hpri: scp-shmem@200 {
-				compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
+			cpu_scp_hpri: scp-sram@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
 				reg = <0x13400 0x400>;
 			};
 		};
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 094/388] ASoC: meson: fix memory leak of links if allocation of ldata fails
       [not found] <20200618010805.600873-1-sashal@kernel.org>
  2020-06-18  1:01 ` [PATCH AUTOSEL 5.7 021/388] arm64: dts: meson-gxbb-kii-pro: fix board compatible Sasha Levin
  2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 024/388] arm64: dts: meson: fixup SCP sram nodes Sasha Levin
@ 2020-06-18  1:03 ` Sasha Levin
  2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 103/388] ASoC: meson: add missing free_irq() in error path Sasha Levin
                   ` (10 subsequent siblings)
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:03 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, alsa-devel, Mark Brown, linux-amlogic,
	Colin Ian King, linux-arm-kernel

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 6e801dc411329aff592fbd48fb116183d0acdb00 ]

Currently if the allocation of ldata fails the error return path
does not kfree the allocated links object.  Fix this by adding
an error exit return path that performs the necessary kfree'ing.

Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Resource leak")
Link: https://lore.kernel.org/r/20200604171216.60043-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/meson-card-utils.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/sound/soc/meson/meson-card-utils.c b/sound/soc/meson/meson-card-utils.c
index 2ca8c98e204f..5a4a91c88734 100644
--- a/sound/soc/meson/meson-card-utils.c
+++ b/sound/soc/meson/meson-card-utils.c
@@ -49,19 +49,26 @@ int meson_card_reallocate_links(struct snd_soc_card *card,
 	links = krealloc(priv->card.dai_link,
 			 num_links * sizeof(*priv->card.dai_link),
 			 GFP_KERNEL | __GFP_ZERO);
+	if (!links)
+		goto err_links;
+
 	ldata = krealloc(priv->link_data,
 			 num_links * sizeof(*priv->link_data),
 			 GFP_KERNEL | __GFP_ZERO);
-
-	if (!links || !ldata) {
-		dev_err(priv->card.dev, "failed to allocate links\n");
-		return -ENOMEM;
-	}
+	if (!ldata)
+		goto err_ldata;
 
 	priv->card.dai_link = links;
 	priv->link_data = ldata;
 	priv->card.num_links = num_links;
 	return 0;
+
+err_ldata:
+	kfree(links);
+err_links:
+	dev_err(priv->card.dev, "failed to allocate links\n");
+	return -ENOMEM;
+
 }
 EXPORT_SYMBOL_GPL(meson_card_reallocate_links);
 
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 103/388] ASoC: meson: add missing free_irq() in error path
       [not found] <20200618010805.600873-1-sashal@kernel.org>
                   ` (2 preceding siblings ...)
  2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 094/388] ASoC: meson: fix memory leak of links if allocation of ldata fails Sasha Levin
@ 2020-06-18  1:03 ` Sasha Levin
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 151/388] clk: meson: meson8b: Fix the first parent of vid_pll_in_sel Sasha Levin
                   ` (9 subsequent siblings)
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:03 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, alsa-devel, Pavel Machek (CIP),
	Mark Brown, linux-amlogic, linux-arm-kernel, Jerome Brunet

From: "Pavel Machek (CIP)" <pavel@denx.de>

[ Upstream commit 3b8a299a58b2afce464ae11324b59dcf0f1d10a7 ]

free_irq() is missing in case of error, fix that.

Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

Link: https://lore.kernel.org/r/20200606153103.GA17905@amd
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-fifo.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index 2e9b56b29d31..b2e867113226 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -249,7 +249,7 @@ int axg_fifo_pcm_open(struct snd_soc_component *component,
 	/* Enable pclk to access registers and clock the fifo ip */
 	ret = clk_prepare_enable(fifo->pclk);
 	if (ret)
-		return ret;
+		goto free_irq;
 
 	/* Setup status2 so it reports the memory pointer */
 	regmap_update_bits(fifo->map, FIFO_CTRL1,
@@ -269,8 +269,14 @@ int axg_fifo_pcm_open(struct snd_soc_component *component,
 	/* Take memory arbitror out of reset */
 	ret = reset_control_deassert(fifo->arb);
 	if (ret)
-		clk_disable_unprepare(fifo->pclk);
+		goto free_clk;
+
+	return 0;
 
+free_clk:
+	clk_disable_unprepare(fifo->pclk);
+free_irq:
+	free_irq(fifo->irq, ss);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(axg_fifo_pcm_open);
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 151/388] clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
       [not found] <20200618010805.600873-1-sashal@kernel.org>
                   ` (3 preceding siblings ...)
  2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 103/388] ASoC: meson: add missing free_irq() in error path Sasha Levin
@ 2020-06-18  1:04 ` Sasha Levin
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 152/388] clk: meson: meson8b: Fix the polarity of the RESET_N lines Sasha Levin
                   ` (8 subsequent siblings)
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:04 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Neil Armstrong, Martin Blumenstingl, linux-amlogic,
	linux-clk, linux-arm-kernel, Jerome Brunet

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit da1978ac3d6cf278dedf5edbf350445a0fff2f08 ]

Use hdmi_pll_lvds_out as parent of the vid_pll_in_sel clock. It's not
easy to see that the vendor kernel does the same, but it actually does.
meson_clk_pll_ops in mainline still cannot fully recalculate all rates
from the HDMI PLL registers because some register bits (at the time of
writing it's unknown which bits are used for this) double the HDMI PLL
output rate (compared to simply considering M, N and FRAC) for some (but
not all) PLL settings.

Update the vid_pll_in_sel parent so our clock calculation works for
simple clock settings like the CVBS output (where no rate doubling is
going on). The PLL ops need to be fixed later on for more complex clock
settings (all HDMI rates).

Fixes: 6cb57c678bb70 ("clk: meson: meson8b: add the read-only video clock trees")
Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200417184127.1319871-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/meson8b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 34a70c4b4899..ac4a883acd2a 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1077,7 +1077,7 @@ static struct clk_regmap meson8b_vid_pll_in_sel = {
 		 * Meson8m2: vid2_pll
 		 */
 		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_hdmi_pll_dco.hw
+			&meson8b_hdmi_pll_lvds_out.hw
 		},
 		.num_parents = 1,
 		.flags = CLK_SET_RATE_PARENT,
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 152/388] clk: meson: meson8b: Fix the polarity of the RESET_N lines
       [not found] <20200618010805.600873-1-sashal@kernel.org>
                   ` (4 preceding siblings ...)
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 151/388] clk: meson: meson8b: Fix the first parent of vid_pll_in_sel Sasha Levin
@ 2020-06-18  1:04 ` Sasha Levin
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 153/388] clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits Sasha Levin
                   ` (7 subsequent siblings)
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:04 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Martin Blumenstingl, linux-amlogic, linux-clk,
	linux-arm-kernel, Jerome Brunet

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 0d3051c790ed2ef6bd91b92b07220313f06b95b3 ]

CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST and
CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE are active low. This means:
- asserting them requires setting the register value to 0
- de-asserting them requires setting the register value to 1

Set the register value accordingly for these two reset lines by setting
the inverted the register value compared to all other reset lines.

Fixes: 189621726bc2f6 ("clk: meson: meson8b: register the built-in reset controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200417184127.1319871-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/meson8b.c | 79 ++++++++++++++++++++++++++-----------
 1 file changed, 56 insertions(+), 23 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index ac4a883acd2a..ecd78cdca8ce 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -3506,54 +3506,87 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
 static const struct meson8b_clk_reset_line {
 	u32 reg;
 	u8 bit_idx;
+	bool active_low;
 } meson8b_clk_reset_bits[] = {
 	[CLKC_RESET_L2_CACHE_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 30
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 30,
+		.active_low = false,
 	},
 	[CLKC_RESET_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 29
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 29,
+		.active_low = false,
 	},
 	[CLKC_RESET_SCU_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 28
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 28,
+		.active_low = false,
 	},
 	[CLKC_RESET_CPU3_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 27
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 27,
+		.active_low = false,
 	},
 	[CLKC_RESET_CPU2_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 26
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 26,
+		.active_low = false,
 	},
 	[CLKC_RESET_CPU1_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 25
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 25,
+		.active_low = false,
 	},
 	[CLKC_RESET_CPU0_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 24
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 24,
+		.active_low = false,
 	},
 	[CLKC_RESET_A5_GLOBAL_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 18
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 18,
+		.active_low = false,
 	},
 	[CLKC_RESET_A5_AXI_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 17
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 17,
+		.active_low = false,
 	},
 	[CLKC_RESET_A5_ABP_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 16
+		.reg = HHI_SYS_CPU_CLK_CNTL0,
+		.bit_idx = 16,
+		.active_low = false,
 	},
 	[CLKC_RESET_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET] = {
-		.reg = HHI_SYS_CPU_CLK_CNTL1, .bit_idx = 30
+		.reg = HHI_SYS_CPU_CLK_CNTL1,
+		.bit_idx = 30,
+		.active_low = false,
 	},
 	[CLKC_RESET_VID_CLK_CNTL_SOFT_RESET] = {
-		.reg = HHI_VID_CLK_CNTL, .bit_idx = 15
+		.reg = HHI_VID_CLK_CNTL,
+		.bit_idx = 15,
+		.active_low = false,
 	},
 	[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_POST] = {
-		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 7
+		.reg = HHI_VID_DIVIDER_CNTL,
+		.bit_idx = 7,
+		.active_low = false,
 	},
 	[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_PRE] = {
-		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 3
+		.reg = HHI_VID_DIVIDER_CNTL,
+		.bit_idx = 3,
+		.active_low = false,
 	},
 	[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST] = {
-		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 1
+		.reg = HHI_VID_DIVIDER_CNTL,
+		.bit_idx = 1,
+		.active_low = true,
 	},
 	[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE] = {
-		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 0
+		.reg = HHI_VID_DIVIDER_CNTL,
+		.bit_idx = 0,
+		.active_low = true,
 	},
 };
 
@@ -3562,22 +3595,22 @@ static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
 {
 	struct meson8b_clk_reset *meson8b_clk_reset =
 		container_of(rcdev, struct meson8b_clk_reset, reset);
-	unsigned long flags;
 	const struct meson8b_clk_reset_line *reset;
+	unsigned int value = 0;
+	unsigned long flags;
 
 	if (id >= ARRAY_SIZE(meson8b_clk_reset_bits))
 		return -EINVAL;
 
 	reset = &meson8b_clk_reset_bits[id];
 
+	if (assert != reset->active_low)
+		value = BIT(reset->bit_idx);
+
 	spin_lock_irqsave(&meson_clk_lock, flags);
 
-	if (assert)
-		regmap_update_bits(meson8b_clk_reset->regmap, reset->reg,
-				   BIT(reset->bit_idx), BIT(reset->bit_idx));
-	else
-		regmap_update_bits(meson8b_clk_reset->regmap, reset->reg,
-				   BIT(reset->bit_idx), 0);
+	regmap_update_bits(meson8b_clk_reset->regmap, reset->reg,
+			   BIT(reset->bit_idx), value);
 
 	spin_unlock_irqrestore(&meson_clk_lock, flags);
 
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 153/388] clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits
       [not found] <20200618010805.600873-1-sashal@kernel.org>
                   ` (5 preceding siblings ...)
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 152/388] clk: meson: meson8b: Fix the polarity of the RESET_N lines Sasha Levin
@ 2020-06-18  1:04 ` Sasha Levin
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 158/388] arm64: dts: meson-g12b-ugoos-am6: fix board compatible Sasha Levin
                   ` (6 subsequent siblings)
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:04 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Martin Blumenstingl, linux-amlogic, linux-clk,
	linux-arm-kernel, Jerome Brunet

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 8bb629cfb28f4dad9d47f69249366e50ae5edc25 ]

The DIV{1,2,4,6,12}_EN bits are actually located in HHI_VID_CLK_CNTL
register:
- HHI_VID_CLK_CNTL[0] = DIV1_EN
- HHI_VID_CLK_CNTL[1] = DIV2_EN
- HHI_VID_CLK_CNTL[2] = DIV4_EN
- HHI_VID_CLK_CNTL[3] = DIV6_EN
- HHI_VID_CLK_CNTL[4] = DIV12_EN

Update the bits accordingly so we will enable the bits in the correct
register once we switch these clocks to be mutable.

Fixes: 6cb57c678bb70e ("clk: meson: meson8b: add the read-only video clock trees")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200417184127.1319871-4-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/meson8b.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index ecd78cdca8ce..5f375799ce46 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1213,7 +1213,7 @@ static struct clk_regmap meson8b_vclk_in_en = {
 
 static struct clk_regmap meson8b_vclk_div1_gate = {
 	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VID_CLK_DIV,
+		.offset = HHI_VID_CLK_CNTL,
 		.bit_idx = 0,
 	},
 	.hw.init = &(struct clk_init_data){
@@ -1243,7 +1243,7 @@ static struct clk_fixed_factor meson8b_vclk_div2_div = {
 
 static struct clk_regmap meson8b_vclk_div2_div_gate = {
 	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VID_CLK_DIV,
+		.offset = HHI_VID_CLK_CNTL,
 		.bit_idx = 1,
 	},
 	.hw.init = &(struct clk_init_data){
@@ -1273,7 +1273,7 @@ static struct clk_fixed_factor meson8b_vclk_div4_div = {
 
 static struct clk_regmap meson8b_vclk_div4_div_gate = {
 	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VID_CLK_DIV,
+		.offset = HHI_VID_CLK_CNTL,
 		.bit_idx = 2,
 	},
 	.hw.init = &(struct clk_init_data){
@@ -1303,7 +1303,7 @@ static struct clk_fixed_factor meson8b_vclk_div6_div = {
 
 static struct clk_regmap meson8b_vclk_div6_div_gate = {
 	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VID_CLK_DIV,
+		.offset = HHI_VID_CLK_CNTL,
 		.bit_idx = 3,
 	},
 	.hw.init = &(struct clk_init_data){
@@ -1333,7 +1333,7 @@ static struct clk_fixed_factor meson8b_vclk_div12_div = {
 
 static struct clk_regmap meson8b_vclk_div12_div_gate = {
 	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VID_CLK_DIV,
+		.offset = HHI_VID_CLK_CNTL,
 		.bit_idx = 4,
 	},
 	.hw.init = &(struct clk_init_data){
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 158/388] arm64: dts: meson-g12b-ugoos-am6: fix board compatible
       [not found] <20200618010805.600873-1-sashal@kernel.org>
                   ` (6 preceding siblings ...)
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 153/388] clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits Sasha Levin
@ 2020-06-18  1:04 ` Sasha Levin
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 159/388] arm64: dts: meson: fix leds subnodes name Sasha Levin
                   ` (5 subsequent siblings)
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:04 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, Neil Armstrong, Kevin Hilman,
	linux-amlogic, linux-arm-kernel

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 5c28dcbb3a1be167c07784b5f710ec602a57bea2 ]

Add missing amlogic,s922x in the board compatible list.

It fixes:
meson-g12b-ugoos-am6.dt.yaml: /: compatible: ['ugoos,am6', 'amlogic,g12b'] is not valid under any of the given schemas

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200326165958.19274-4-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index 06c5430eb92d..fdaacfd96b97 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -14,7 +14,7 @@
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
-	compatible = "ugoos,am6", "amlogic,g12b";
+	compatible = "ugoos,am6", "amlogic,s922x", "amlogic,g12b";
 	model = "Ugoos AM6";
 
 	aliases {
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 159/388] arm64: dts: meson: fix leds subnodes name
       [not found] <20200618010805.600873-1-sashal@kernel.org>
                   ` (7 preceding siblings ...)
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 158/388] arm64: dts: meson-g12b-ugoos-am6: fix board compatible Sasha Levin
@ 2020-06-18  1:04 ` Sasha Levin
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 161/388] clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers Sasha Levin
                   ` (4 subsequent siblings)
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:04 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, Neil Armstrong, Kevin Hilman,
	linux-amlogic, linux-arm-kernel

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 08dc0e5dd9aabd52cff9e94febe6b282d29deca4 ]

Fix the leds subnode names to match (^led-[0-9a-f]$|led)

It fixes:
meson-g12b-a311d-khadas-vim3.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-g12b-s922x-khadas-vim3.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-g12b-odroid-n2.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-nanopi-k2.dt.yaml: leds: 'stat' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-nexbox-a95x.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-odroidc2.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-vega-s95-pro.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-vega-s95-meta.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-vega-s95-telos.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-wetek-hub.dt.yaml: leds: 'system' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-wetek-play2.dt.yaml: leds: 'ethernet', 'system', 'wifi' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxl-s905x-libretech-cc.dt.yaml: leds: 'blue', 'system' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxl-s905d-libretech-pc.dt.yaml: leds: 'blue', 'green' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxm-rbox-pro.dt.yaml: leds: 'blue', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxm-s912-libretech-pc.dt.yaml: leds: 'blue', 'green' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-sm1-sei610.dt.yaml: leds: 'bluetooth' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-sm1-khadas-vim3l.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200326165958.19274-6-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi       | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts         | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts       | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts          | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi         | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts       | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi            | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts           | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi           | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts             | 2 +-
 11 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index 248b018c83d5..b1da36fdeac6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -96,14 +96,14 @@ dc_in: regulator-dc_in {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-green {
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_DISK_ACTIVITY;
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "disk-activity";
 		};
 
-		blue {
+		led-blue {
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index d6ca684e0e61..7be3e354093b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -29,7 +29,7 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		stat {
+		led-stat {
 			label = "nanopi-k2:blue:stat";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 65ec7dea828c..67d901ed2fa3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -31,7 +31,7 @@ memory@0 {
 
 	leds {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "a95x:system-status";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index b46ef985bb44..70fcfb7b0683 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -49,7 +49,7 @@ usb_otg_pwr: regulator-usb-pwrs {
 
 	leds {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "c2:blue:alive";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 45cb83625951..222ee8069cfa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -20,7 +20,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "vega-s95:blue:on";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index 1d32d1f6d032..2ab8a3d10079 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -14,13 +14,13 @@ / {
 	model = "WeTek Play 2";
 
 	leds {
-		wifi {
+		led-wifi {
 			label = "wetek-play:wifi-status";
 			gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		ethernet {
+		led-ethernet {
 			label = "wetek-play:ethernet-status";
 			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index dee51cf95223..d6133af09d64 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -25,7 +25,7 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		system {
+		led-system {
 			label = "wetek-play:system-status";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index e8348b2728db..a4a71c13891b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -54,14 +54,14 @@ hdmi_connector_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		system {
+		led-system {
 			label = "librecomputer:system-status";
 			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 			panic-indicator;
 		};
 
-		blue {
+		led-blue {
 			label = "librecomputer:blue";
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 420a88e9a195..c89c9f846fb1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -36,13 +36,13 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "rbox-pro:blue:on";
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		red {
+		led-red {
 			label = "rbox-pro:red:standby";
 			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 094ecf2222bb..1ef1e3672b96 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -39,13 +39,13 @@ button-function {
 	leds {
 		compatible = "gpio-leds";
 
-		white {
+		led-white {
 			label = "vim3:white:sys";
 			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		red {
+		led-red {
 			label = "vim3:red";
 			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index dfb2438851c0..5ab139a34c01 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -104,7 +104,7 @@ hdmi_connector_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		bluetooth {
+		led-bluetooth {
 			label = "sei610:blue:bt";
 			gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
 			default-state = "off";
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 161/388] clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers
       [not found] <20200618010805.600873-1-sashal@kernel.org>
                   ` (8 preceding siblings ...)
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 159/388] arm64: dts: meson: fix leds subnodes name Sasha Levin
@ 2020-06-18  1:04 ` Sasha Levin
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 168/388] usb: dwc3: meson-g12a: check return of dwc3_meson_g12a_usb_init Sasha Levin
                   ` (3 subsequent siblings)
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:04 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Martin Blumenstingl, linux-amlogic, linux-clk,
	linux-arm-kernel, Jerome Brunet

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit a29ae8600d50ece1856b062a39ed296b8b952259 ]

Not all u-boot versions initialize the HHI_GP_PLL_CNTL[2-5] registers.
In that case all HHI_GPLL_PLL_CNTL[1-5] registers are 0x0 and when
booting Linux the PLL fails to lock.
The initialization sequence from u-boot is:
- put the PLL into reset
- write 0x59C88000 to HHI_GP_PLL_CNTL2
- write 0xCA463823 to HHI_GP_PLL_CNTL3
- write 0x0286A027 to HHI_GP_PLL_CNTL4
- write 0x00003000 to HHI_GP_PLL_CNTL5
- set M, N, OD and the enable bit
- take the PLL out of reset
- check if it has locked
- disable the PLL

In Linux we already initialize M, N, OD, the enable and the reset bits.
Also the HHI_GP_PLL_CNTL[2-5] registers with these magic values (the
exact meaning is unknown) so the PLL can lock when the vendor u-boot did
not initialize these registers yet.

Fixes: b882964b376f21 ("clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200501215717.735393-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/meson8b.c | 9 +++++++++
 drivers/clk/meson/meson8b.h | 4 ++++
 2 files changed, 13 insertions(+)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 5f375799ce46..11f6b868cf2b 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1918,6 +1918,13 @@ static struct clk_regmap meson8b_mali = {
 	},
 };
 
+static const struct reg_sequence meson8m2_gp_pll_init_regs[] = {
+	{ .reg = HHI_GP_PLL_CNTL2,	.def = 0x59c88000 },
+	{ .reg = HHI_GP_PLL_CNTL3,	.def = 0xca463823 },
+	{ .reg = HHI_GP_PLL_CNTL4,	.def = 0x0286a027 },
+	{ .reg = HHI_GP_PLL_CNTL5,	.def = 0x00003000 },
+};
+
 static const struct pll_params_table meson8m2_gp_pll_params_table[] = {
 	PLL_PARAMS(182, 3),
 	{ /* sentinel */ },
@@ -1951,6 +1958,8 @@ static struct clk_regmap meson8m2_gp_pll_dco = {
 			.width   = 1,
 		},
 		.table = meson8m2_gp_pll_params_table,
+		.init_regs = meson8m2_gp_pll_init_regs,
+		.init_count = ARRAY_SIZE(meson8m2_gp_pll_init_regs),
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "gp_pll_dco",
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index c889fbeec30f..c91fb07fcb65 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -20,6 +20,10 @@
  * [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
  */
 #define HHI_GP_PLL_CNTL			0x40  /* 0x10 offset in data sheet */
+#define HHI_GP_PLL_CNTL2		0x44  /* 0x11 offset in data sheet */
+#define HHI_GP_PLL_CNTL3		0x48  /* 0x12 offset in data sheet */
+#define HHI_GP_PLL_CNTL4		0x4C  /* 0x13 offset in data sheet */
+#define HHI_GP_PLL_CNTL5		0x50  /* 0x14 offset in data sheet */
 #define HHI_VIID_CLK_DIV		0x128 /* 0x4a offset in data sheet */
 #define HHI_VIID_CLK_CNTL		0x12c /* 0x4b offset in data sheet */
 #define HHI_GCLK_MPEG0			0x140 /* 0x50 offset in data sheet */
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 168/388] usb: dwc3: meson-g12a: check return of dwc3_meson_g12a_usb_init
       [not found] <20200618010805.600873-1-sashal@kernel.org>
                   ` (9 preceding siblings ...)
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 161/388] clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers Sasha Levin
@ 2020-06-18  1:04 ` Sasha Levin
  2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 239/388] ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id" Sasha Levin
                   ` (2 subsequent siblings)
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:04 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Felipe Balbi, Neil Armstrong, Martin Blumenstingl,
	linux-usb, linux-amlogic, linux-arm-kernel

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 8f5bc1ec770c2bdc8c604ba4119a77d81d8f3529 ]

The dwc3_meson_g12a_usb_init function can return an error, check it.

Fixes: c99993376f72ca ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index b81d085bc534..2d257bdfe848 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -525,7 +525,9 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	/* Get dr_mode */
 	priv->otg_mode = usb_get_dr_mode(dev);
 
-	dwc3_meson_g12a_usb_init(priv);
+	ret = dwc3_meson_g12a_usb_init(priv);
+	if (ret)
+		goto err_disable_clks;
 
 	/* Init PHYs */
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 239/388] ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id"
       [not found] <20200618010805.600873-1-sashal@kernel.org>
                   ` (10 preceding siblings ...)
  2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 168/388] usb: dwc3: meson-g12a: check return of dwc3_meson_g12a_usb_init Sasha Levin
@ 2020-06-18  1:05 ` Sasha Levin
  2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 259/388] PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link Sasha Levin
  2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 305/388] usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Sasha Levin
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:05 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, devicetree, Martin Blumenstingl, Kevin Hilman,
	linux-amlogic, linux-arm-kernel

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 005231128e9e97461e81fa32421957a7664317ca ]

Let the PHY generate the RX and TX delay on the Odroid-C1 and MXIII
Plus.

Previously we did not know that these boards used an RX delay. We
assumed that setting the TX delay on the MAC side It turns out that
these boards also require an RX delay of 2ns (verified on Odroid-C1,
but the u-boot code uses the same setup on both boards). Ethernet only
worked because u-boot added this RX delay on the MAC side.

The 4ns TX delay was also wrong and the result of using an unsupported
RGMII TX clock divider setting. This has been fixed in the driver with
commit bd6f48546b9cb7 ("net: stmmac: dwmac-meson8b: Fix the RGMII TX
delay on Meson8b/8m2 SoCs").

Switch to phy-mode "rgmii-id" to let the PHY side handle all the delays,
(as recommended by the Ethernet maintainers anyways) to correctly
describe the need for a 2ns RX as well as 2ns TX delay on these boards.
This fixes the Ethernet performance on Odroid-C1 where there was a huge
amount of packet loss when transmitting data due to the incorrect TX
delay.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200512215148.540322-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts    | 3 +--
 arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 4 +---
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a2a47804fc4a..cb21ac9f517c 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -202,9 +202,8 @@ &ethmac {
 	pinctrl-0 = <&eth_rgmii_pins>;
 	pinctrl-names = "default";
 
-	phy-mode = "rgmii";
 	phy-handle = <&eth_phy>;
-	amlogic,tx-delay-ns = <4>;
+	phy-mode = "rgmii-id";
 
 	nvmem-cells = <&ethernet_mac_address>;
 	nvmem-cell-names = "mac-address";
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index d54477b1001c..cc498191ddd1 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -69,9 +69,7 @@ &ethmac {
 	pinctrl-names = "default";
 
 	phy-handle = <&eth_phy0>;
-	phy-mode = "rgmii";
-
-	amlogic,tx-delay-ns = <4>;
+	phy-mode = "rgmii-id";
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 259/388] PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
       [not found] <20200618010805.600873-1-sashal@kernel.org>
                   ` (11 preceding siblings ...)
  2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 239/388] ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id" Sasha Levin
@ 2020-06-18  1:05 ` Sasha Levin
  2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 305/388] usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Sasha Levin
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:05 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Rob Herring, Lorenzo Pieralisi, Neil Armstrong,
	Marc Zyngier, linux-pci, linux-amlogic, linux-arm-kernel

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 87dccf09323fc363bd0d072fcc12b96622ab8c69 ]

The vim3l board does not work with a standard PCIe switch (ASM1184e),
spitting all kind of errors - hinting at HW misconfiguration (no link,
port enumeration issues, etc).

According to the the Synopsys DWC PCIe Reference Manual, in the section
dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as:

"Sets all internal timers to fast mode for simulation purposes."

it is sound to set this bit from a simulation perspective, but on actual
silicon, which expects timers to have a nominal value, it is not.

Make sure the FAST_LINK_MODE bit is cleared when configuring the RC
to solve this problem.

Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@kernel.org
Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-meson.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
index 3715dceca1bf..ca59ba9e0ecd 100644
--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -289,11 +289,11 @@ static void meson_pcie_init_dw(struct meson_pcie *mp)
 	meson_cfg_writel(mp, val, PCIE_CFG0);
 
 	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
-	val &= ~LINK_CAPABLE_MASK;
+	val &= ~(LINK_CAPABLE_MASK | FAST_LINK_MODE);
 	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
 
 	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
-	val |= LINK_CAPABLE_X1 | FAST_LINK_MODE;
+	val |= LINK_CAPABLE_X1;
 	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
 
 	val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH AUTOSEL 5.7 305/388] usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
       [not found] <20200618010805.600873-1-sashal@kernel.org>
                   ` (12 preceding siblings ...)
  2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 259/388] PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link Sasha Levin
@ 2020-06-18  1:06 ` Sasha Levin
  13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2020-06-18  1:06 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sasha Levin, Hanjie Lin, Neil Armstrong, Martin Blumenstingl,
	Greg Kroah-Hartman, linux-usb, Yue Wang, linux-amlogic,
	linux-arm-kernel

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit be8c1001a7e681e8813882a42ed51c8dbffd8800 ]

Disable and unprepare the clocks when devm_reset_control_get_shared()
fails. This fixes the error path as this must disable the clocks which
were previously enabled.

Fixes: 1e355f21d3fb96 ("usb: dwc3: Add Amlogic A1 DWC3 glue")
Cc: Yue Wang <yue.wang@amlogic.com>
Cc: Hanjie Lin <hanjie.lin@amlogic.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200526202943.715220-2-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 2d257bdfe848..eabb3bb6fcaa 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -505,7 +505,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->reset)) {
 		ret = PTR_ERR(priv->reset);
 		dev_err(dev, "failed to get device reset, err=%d\n", ret);
-		return ret;
+		goto err_disable_clks;
 	}
 
 	ret = reset_control_reset(priv->reset);
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, back to index

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20200618010805.600873-1-sashal@kernel.org>
2020-06-18  1:01 ` [PATCH AUTOSEL 5.7 021/388] arm64: dts: meson-gxbb-kii-pro: fix board compatible Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 024/388] arm64: dts: meson: fixup SCP sram nodes Sasha Levin
2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 094/388] ASoC: meson: fix memory leak of links if allocation of ldata fails Sasha Levin
2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 103/388] ASoC: meson: add missing free_irq() in error path Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 151/388] clk: meson: meson8b: Fix the first parent of vid_pll_in_sel Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 152/388] clk: meson: meson8b: Fix the polarity of the RESET_N lines Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 153/388] clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 158/388] arm64: dts: meson-g12b-ugoos-am6: fix board compatible Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 159/388] arm64: dts: meson: fix leds subnodes name Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 161/388] clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 168/388] usb: dwc3: meson-g12a: check return of dwc3_meson_g12a_usb_init Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 239/388] ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id" Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 259/388] PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 305/388] usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Sasha Levin

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git