Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/1] arm64: dts: meson: g12b: odroid-n2: Assign a fixed index to mmc devices
@ 2021-01-27 23:08 Alexander Stein
  2021-01-29  8:07 ` Neil Armstrong
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Alexander Stein @ 2021-01-27 23:08 UTC (permalink / raw)
  To: Rob Herring, Kevin Hilman, Neil Armstrong, Jerome Brunet,
	Martin Blumenstingl
  Cc: Alexander Stein, devicetree, linux-arm-kernel, linux-amlogic

Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs
are not practical. Use newly introduced aliases for mmcblk devices from [1].
[1]
https://patchwork.kernel.org/patch/11747669/

Commit message taken from commit 0011c6d18277 ("arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.")

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
---
I was wondering which order I should use. Depending in your booting
medium (SD card or eMMC) you 'want' one or the other as mmc0.
In the end I ordered them according to the names.

 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 050862cd0996..2faa4da917c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -13,6 +13,8 @@ / {
 	aliases {
 		serial0 = &uart_AO;
 		ethernet0 = &ethmac;
+		mmc0 = &sd_emmc_b;
+		mmc1 = &sd_emmc_c;
 	};
 
 	dioo2133: audio-amplifier-0 {
-- 
2.30.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/1] arm64: dts: meson: g12b: odroid-n2: Assign a fixed index to mmc devices
  2021-01-27 23:08 [PATCH 1/1] arm64: dts: meson: g12b: odroid-n2: Assign a fixed index to mmc devices Alexander Stein
@ 2021-01-29  8:07 ` Neil Armstrong
  2021-01-29 20:51   ` Alexander Stein
  2021-02-02 17:03 ` [PATCH v2 1/1] arm64: dts: amlogic: " Alexander Stein
  2021-02-03 19:28 ` [PATCH v3 " Alexander Stein
  2 siblings, 1 reply; 10+ messages in thread
From: Neil Armstrong @ 2021-01-29  8:07 UTC (permalink / raw)
  To: Alexander Stein, Rob Herring, Kevin Hilman, Jerome Brunet,
	Martin Blumenstingl
  Cc: devicetree, linux-arm-kernel, linux-amlogic

Hi,

On 28/01/2021 00:08, Alexander Stein wrote:
> Recently introduced async probe on mmc devices can shuffle block IDs.
> Pin them to fixed values to ease booting in environments where UUIDs
> are not practical. Use newly introduced aliases for mmcblk devices from [1].
> [1]
> https://patchwork.kernel.org/patch/11747669/

I understand the goal, and this should be done for _all_ boards, not only the Odroid-N2.

Neil

> 
> Commit message taken from commit 0011c6d18277 ("arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.")
> 
> Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
> ---
> I was wondering which order I should use. Depending in your booting
> medium (SD card or eMMC) you 'want' one or the other as mmc0.
> In the end I ordered them according to the names.
> 
>  arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> index 050862cd0996..2faa4da917c1 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> @@ -13,6 +13,8 @@ / {
>  	aliases {
>  		serial0 = &uart_AO;
>  		ethernet0 = &ethmac;
> +		mmc0 = &sd_emmc_b;
> +		mmc1 = &sd_emmc_c;
>  	};
>  
>  	dioo2133: audio-amplifier-0 {
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/1] arm64: dts: meson: g12b: odroid-n2: Assign a fixed index to mmc devices
  2021-01-29  8:07 ` Neil Armstrong
@ 2021-01-29 20:51   ` Alexander Stein
  2021-02-02  0:50     ` Kevin Hilman
  0 siblings, 1 reply; 10+ messages in thread
From: Alexander Stein @ 2021-01-29 20:51 UTC (permalink / raw)
  To: Rob Herring, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
	Neil Armstrong
  Cc: devicetree, linux-arm-kernel, linux-amlogic

Hi,

Am Freitag, 29. Januar 2021, 09:07:45 CET schrieb Neil Armstrong:
> On 28/01/2021 00:08, Alexander Stein wrote:
> > Recently introduced async probe on mmc devices can shuffle block IDs.
> > Pin them to fixed values to ease booting in environments where UUIDs
> > are not practical. Use newly introduced aliases for mmcblk devices from 
[1].
> > [1]
> > https://patchwork.kernel.org/patch/11747669/
> 
> I understand the goal, and this should be done for _all_ boards, not only 
the Odroid-N2.

I see. So there are 2 options:
1.
Set the mapping for all 3 sd_emmc_* in the top-most .dtsi
Upside: very easy patch
Downside: When sd_emmc_a is not enabled "mmc0" will never be available.
Might be confusing.

2.
Set mapping only for enabled sd_emmc_* in the .dts[i] where it is enabled
Upside: Clean setup, only enabled sd_emmc_* have an alias
Downside: Much verbose patch(set)

Any preferences here? I honestly tend to 1. But this might break boards where
sd_emmc_a is not enabled, because the root device _will_ change in that case.

Best regards,
Alexander




_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/1] arm64: dts: meson: g12b: odroid-n2: Assign a fixed index to mmc devices
  2021-01-29 20:51   ` Alexander Stein
@ 2021-02-02  0:50     ` Kevin Hilman
  0 siblings, 0 replies; 10+ messages in thread
From: Kevin Hilman @ 2021-02-02  0:50 UTC (permalink / raw)
  To: Alexander Stein, Rob Herring, Jerome Brunet, Martin Blumenstingl,
	Neil Armstrong
  Cc: devicetree, linux-arm-kernel, linux-amlogic

Alexander Stein <alexander.stein@mailbox.org> writes:

> Hi,
>
> Am Freitag, 29. Januar 2021, 09:07:45 CET schrieb Neil Armstrong:
>> On 28/01/2021 00:08, Alexander Stein wrote:
>> > Recently introduced async probe on mmc devices can shuffle block IDs.
>> > Pin them to fixed values to ease booting in environments where UUIDs
>> > are not practical. Use newly introduced aliases for mmcblk devices from 
> [1].
>> > [1]
>> > https://patchwork.kernel.org/patch/11747669/
>> 
>> I understand the goal, and this should be done for _all_ boards, not only 
> the Odroid-N2.
>
> I see. So there are 2 options:
> 1.
> Set the mapping for all 3 sd_emmc_* in the top-most .dtsi
> Upside: very easy patch
> Downside: When sd_emmc_a is not enabled "mmc0" will never be available.
> Might be confusing.

sd_emmc_a is (almost?) always the iface used for SDIO devices, which are
not always present.

I would recommend we go with a single mapping in the top-level .dtsi

  SD card -> mmc0  (sd_emmc_b)
  eMMC    -> mmc1  (sd_emmc_c)
  SDIO    -> mmc2  (sd_emmc_a)

it's not exactly obvious why we don't go 0,1,2 == A,B,C but just
document it in the top-level .dtsi.

This approach also has the benefit of having the devices show up how
many/most boards showed up before the async probe changes.

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 1/1] arm64: dts: amlogic: Assign a fixed index to mmc devices
  2021-01-27 23:08 [PATCH 1/1] arm64: dts: meson: g12b: odroid-n2: Assign a fixed index to mmc devices Alexander Stein
  2021-01-29  8:07 ` Neil Armstrong
@ 2021-02-02 17:03 ` Alexander Stein
  2021-02-03 19:20   ` Kevin Hilman
  2021-02-03 19:28 ` [PATCH v3 " Alexander Stein
  2 siblings, 1 reply; 10+ messages in thread
From: Alexander Stein @ 2021-02-02 17:03 UTC (permalink / raw)
  To: Rob Herring, Kevin Hilman, Neil Armstrong, Jerome Brunet,
	Martin Blumenstingl
  Cc: Alexander Stein, devicetree, linux-arm-kernel, linux-amlogic

Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs
are not practical. Use newly introduced aliases for mmcblk devices from [1].
[1]
https://patchwork.kernel.org/patch/11747669/

Commit message taken from commit 0011c6d18277 ("arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.")

The unconventional order (B, C, A) is due to the fact that sd_emmc_a is
(according to the comments) only used for SDIO.

AFAICS all boards either have both sd_emmc_b and sd_emmc_c or only one of
them enabled. So the alias order should match the previous non-async order
for all of them.

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
---
Just for the records, I only tested this on my ODROID-N2 (G12 based) board.

 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 ++++++
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi         | 6 ++++++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 9c90d562ada1..15525f3aa4a6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -17,6 +17,12 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		mmc0 = &sd_emmc_b;
+		mmc1 = &sd_emmc_c;
+		mmc2 = &sd_emmc_a;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 726b91d3a905..769d7e8fda13 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -21,6 +21,12 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		mmc0 = &sd_emmc_b;
+		mmc1 = &sd_emmc_c;
+		mmc2 = &sd_emmc_a;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
2.30.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 1/1] arm64: dts: amlogic: Assign a fixed index to mmc devices
  2021-02-02 17:03 ` [PATCH v2 1/1] arm64: dts: amlogic: " Alexander Stein
@ 2021-02-03 19:20   ` Kevin Hilman
  0 siblings, 0 replies; 10+ messages in thread
From: Kevin Hilman @ 2021-02-03 19:20 UTC (permalink / raw)
  To: Alexander Stein, Rob Herring, Neil Armstrong, Jerome Brunet,
	Martin Blumenstingl
  Cc: Alexander Stein, devicetree, linux-arm-kernel, linux-amlogic

Alexander Stein <alexander.stein@mailbox.org> writes:

> Recently introduced async probe on mmc devices can shuffle block IDs.
> Pin them to fixed values to ease booting in environments where UUIDs
> are not practical. Use newly introduced aliases for mmcblk devices from [1].
> [1]
> https://patchwork.kernel.org/patch/11747669/
>
> Commit message taken from commit 0011c6d18277 ("arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.")
>
> The unconventional order (B, C, A) is due to the fact that sd_emmc_a is
> (according to the comments) only used for SDIO.
>
> AFAICS all boards either have both sd_emmc_b and sd_emmc_c or only one of
> them enabled. So the alias order should match the previous non-async order
> for all of them.
>
> Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
> ---
> Just for the records, I only tested this on my ODROID-N2 (G12 based) board.
>
>  arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 ++++++
>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi         | 6 ++++++
>  2 files changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> index 9c90d562ada1..15525f3aa4a6 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> @@ -17,6 +17,12 @@ / {
>  	#address-cells = <2>;
>  	#size-cells = <2>;
>  
> +	aliases {
> +		mmc0 = &sd_emmc_b;
> +		mmc1 = &sd_emmc_c;
> +		mmc2 = &sd_emmc_a;
> +	};
> +

Thanks for updating this.

minor nit: as I suggested earlier, could you add comments here showing the
intention that mmc0 -> SD, mmc1 -> eMMC, mmc2 -> SDIO

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v3 1/1] arm64: dts: amlogic: Assign a fixed index to mmc devices
  2021-01-27 23:08 [PATCH 1/1] arm64: dts: meson: g12b: odroid-n2: Assign a fixed index to mmc devices Alexander Stein
  2021-01-29  8:07 ` Neil Armstrong
  2021-02-02 17:03 ` [PATCH v2 1/1] arm64: dts: amlogic: " Alexander Stein
@ 2021-02-03 19:28 ` Alexander Stein
  2021-02-18 18:09   ` Alexander Stein
  2021-03-08 17:39   ` Kevin Hilman
  2 siblings, 2 replies; 10+ messages in thread
From: Alexander Stein @ 2021-02-03 19:28 UTC (permalink / raw)
  To: Rob Herring, Kevin Hilman, Neil Armstrong, Jerome Brunet,
	Martin Blumenstingl
  Cc: Alexander Stein, devicetree, linux-arm-kernel, linux-amlogic

Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs
are not practical. Use newly introduced aliases for mmcblk devices from [1].
[1]
https://patchwork.kernel.org/patch/11747669/

Commit message taken from commit 0011c6d18277 ("arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.")

The unconventional order (B, C, A) is due to the fact that sd_emmc_a is
(according to the comments) only used for SDIO.

AFAICS all boards either have both sd_emmc_b and sd_emmc_c or only one of
them enabled. So the alias order should match the previous non-async order
for all of them.

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
---
Changes in v3:
* Added comment on intented ordering

 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 ++++++
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi         | 6 ++++++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 9c90d562ada1..f9a42f45ac52 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -17,6 +17,12 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		mmc0 = &sd_emmc_b; /* SD card */
+		mmc1 = &sd_emmc_c; /* eMMC */
+		mmc2 = &sd_emmc_a; /* SDIO */
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 726b91d3a905..59d11f65c7b3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -21,6 +21,12 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		mmc0 = &sd_emmc_b; /* SD card */
+		mmc1 = &sd_emmc_c; /* eMMC */
+		mmc2 = &sd_emmc_a; /* SDIO */
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
2.30.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 1/1] arm64: dts: amlogic: Assign a fixed index to mmc devices
  2021-02-03 19:28 ` [PATCH v3 " Alexander Stein
@ 2021-02-18 18:09   ` Alexander Stein
  2021-03-08 17:43     ` Kevin Hilman
  2021-03-08 17:39   ` Kevin Hilman
  1 sibling, 1 reply; 10+ messages in thread
From: Alexander Stein @ 2021-02-18 18:09 UTC (permalink / raw)
  To: Rob Herring, Kevin Hilman, Neil Armstrong, Jerome Brunet,
	Martin Blumenstingl
  Cc: devicetree, linux-arm-kernel, linux-amlogic

Am Mittwoch, 3. Februar 2021, 20:28:24 CET schrieb Alexander Stein:
> Recently introduced async probe on mmc devices can shuffle block IDs.
> Pin them to fixed values to ease booting in environments where UUIDs
> are not practical. Use newly introduced aliases for mmcblk devices from [1].
> [1]
> https://patchwork.kernel.org/patch/11747669/
> 
> Commit message taken from commit 0011c6d18277 ("arm64: dts: rockchip: Assign
> a fixed index to mmc devices on rk3399 boards.")
> 
> The unconventional order (B, C, A) is due to the fact that sd_emmc_a is
> (according to the comments) only used for SDIO.
> 
> AFAICS all boards either have both sd_emmc_b and sd_emmc_c or only one of
> them enabled. So the alias order should match the previous non-async order
> for all of them.
> 
> Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>

Any feedback on this?

Best regards,
Alexander



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 1/1] arm64: dts: amlogic: Assign a fixed index to mmc devices
  2021-02-03 19:28 ` [PATCH v3 " Alexander Stein
  2021-02-18 18:09   ` Alexander Stein
@ 2021-03-08 17:39   ` Kevin Hilman
  1 sibling, 0 replies; 10+ messages in thread
From: Kevin Hilman @ 2021-03-08 17:39 UTC (permalink / raw)
  To: Martin Blumenstingl, Neil Armstrong, Jerome Brunet, Rob Herring,
	Alexander Stein
  Cc: linux-arm-kernel, linux-amlogic, devicetree

On Wed, 3 Feb 2021 20:28:24 +0100, Alexander Stein wrote:
> Recently introduced async probe on mmc devices can shuffle block IDs.
> Pin them to fixed values to ease booting in environments where UUIDs
> are not practical. Use newly introduced aliases for mmcblk devices from [1].
> [1]
> https://patchwork.kernel.org/patch/11747669/
> 
> Commit message taken from commit 0011c6d18277 ("arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.")
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: amlogic: Assign a fixed index to mmc devices
      commit: 7827db7f6141fda9af4b07864cab0c10398affff

Best regards,
-- 
Kevin Hilman <khilman@baylibre.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 1/1] arm64: dts: amlogic: Assign a fixed index to mmc devices
  2021-02-18 18:09   ` Alexander Stein
@ 2021-03-08 17:43     ` Kevin Hilman
  0 siblings, 0 replies; 10+ messages in thread
From: Kevin Hilman @ 2021-03-08 17:43 UTC (permalink / raw)
  To: Alexander Stein, Rob Herring, Neil Armstrong, Jerome Brunet,
	Martin Blumenstingl
  Cc: devicetree, linux-amlogic, linux-arm-kernel

Alexander Stein <alexander.stein@mailbox.org> writes:

> Am Mittwoch, 3. Februar 2021, 20:28:24 CET schrieb Alexander Stein:
>> Recently introduced async probe on mmc devices can shuffle block IDs.
>> Pin them to fixed values to ease booting in environments where UUIDs
>> are not practical. Use newly introduced aliases for mmcblk devices from [1].
>> [1]
>> https://patchwork.kernel.org/patch/11747669/
>> 
>> Commit message taken from commit 0011c6d18277 ("arm64: dts: rockchip: Assign
>> a fixed index to mmc devices on rk3399 boards.")
>> 
>> The unconventional order (B, C, A) is due to the fact that sd_emmc_a is
>> (according to the comments) only used for SDIO.
>> 
>> AFAICS all boards either have both sd_emmc_b and sd_emmc_c or only one of
>> them enabled. So the alias order should match the previous non-async order
>> for all of them.
>> 
>> Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
>
> Any feedback on this?

Sorry for the delay.

I somehow missed this v3 at the end of the v5.12 cycle, but I've queued
it up for v5.13 now so it should get broader testing in linux-next now.

Kevin


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-27 23:08 [PATCH 1/1] arm64: dts: meson: g12b: odroid-n2: Assign a fixed index to mmc devices Alexander Stein
2021-01-29  8:07 ` Neil Armstrong
2021-01-29 20:51   ` Alexander Stein
2021-02-02  0:50     ` Kevin Hilman
2021-02-02 17:03 ` [PATCH v2 1/1] arm64: dts: amlogic: " Alexander Stein
2021-02-03 19:20   ` Kevin Hilman
2021-02-03 19:28 ` [PATCH v3 " Alexander Stein
2021-02-18 18:09   ` Alexander Stein
2021-03-08 17:43     ` Kevin Hilman
2021-03-08 17:39   ` Kevin Hilman

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git