* [PATCH v2 0/2] Meson8/Meson8b: sound card support @ 2021-07-17 23:30 Martin Blumenstingl 2021-07-17 23:30 ` [PATCH v2 1/2] ARM: dts: meson: Add the AIU audio controller Martin Blumenstingl ` (2 more replies) 0 siblings, 3 replies; 6+ messages in thread From: Martin Blumenstingl @ 2021-07-17 23:30 UTC (permalink / raw) To: linux-amlogic Cc: narmstrong, khilman, linux-arm-kernel, linux-kernel, Martin Blumenstingl This series adds the AIU audio controller for Meson8 and Meson8b. The AIU audio controller has been found to work fine with out-of-tree patches for HDMI audio (over I2S). SPDIF output also works (tested with a scope). Endless Mini (EC-100) has an RT5640 audio codec. The driver for this codec can be selected since commit 08c56cab302a05 ("ASoC: rt5640: Make codec selectable"), which is part of Linux 5.14-rc1. While support is not perfect (due to us lacking proper support for configuring GPIO_BSD_EN) audio output still works fine. This series is based on my bugfix patch "ARM: dts: meson8: Use a higher default GPU clock frequency" from [0] Changes since v1 at [1]: - added sound-name-prefix = "AIU"; to the first patch to make it identical to what we have in meson-gx.dtsi - drop audio-routing property from the sound card in the second patch as it doesn't appear to be needed [0] https://patchwork.kernel.org/project/linux-amlogic/patch/20210711214023.2163565-1-martin.blumenstingl@googlemail.com/ [1] https://patchwork.kernel.org/project/linux-amlogic/cover/20210713231103.2994354-1-martin.blumenstingl@googlemail.com/ Martin Blumenstingl (2): ARM: dts: meson: Add the AIU audio controller ARM: dts: meson8b: ec100: wire up the RT5640 audio codec arch/arm/boot/dts/meson.dtsi | 12 ++++++ arch/arm/boot/dts/meson8.dtsi | 63 +++++++++++++++++++++++++++++ arch/arm/boot/dts/meson8b-ec100.dts | 44 ++++++++++++++++++++ arch/arm/boot/dts/meson8b.dtsi | 63 +++++++++++++++++++++++++++++ 4 files changed, 182 insertions(+) -- 2.32.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/2] ARM: dts: meson: Add the AIU audio controller 2021-07-17 23:30 [PATCH v2 0/2] Meson8/Meson8b: sound card support Martin Blumenstingl @ 2021-07-17 23:30 ` Martin Blumenstingl 2021-07-26 8:00 ` Neil Armstrong 2021-07-17 23:30 ` [PATCH v2 2/2] ARM: dts: meson8b: ec100: wire up the RT5640 audio codec Martin Blumenstingl 2021-07-26 8:12 ` [PATCH v2 0/2] Meson8/Meson8b: sound card support Neil Armstrong 2 siblings, 1 reply; 6+ messages in thread From: Martin Blumenstingl @ 2021-07-17 23:30 UTC (permalink / raw) To: linux-amlogic Cc: narmstrong, khilman, linux-arm-kernel, linux-kernel, Martin Blumenstingl Add the AIU audio controller to the Amlogic Meson6/8/8b/8m2 SoC DT. This provides I2S and SPDIF outputs as well as codec glues for the internal HDMI controller. Also add the clock inputs and pin mux definitions on Meson8/8b/8m2. On Meson6 this is omitted because we neither have a clock nor pin controller node there yet. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- arch/arm/boot/dts/meson.dtsi | 12 +++++++ arch/arm/boot/dts/meson8.dtsi | 63 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/meson8b.dtsi | 63 ++++++++++++++++++++++++++++++++++ 3 files changed, 138 insertions(+) diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index bd0e864964e9..3be7cba603d5 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/sound/meson-aiu.h> / { #address-cells = <1>; @@ -36,6 +37,17 @@ hhi: system-controller@4000 { reg = <0x4000 0x400>; }; + aiu: audio-controller@5400 { + compatible = "amlogic,aiu"; + #sound-dai-cells = <2>; + sound-name-prefix = "AIU"; + reg = <0x5400 0x2ac>; + interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "i2s", "spdif"; + status = "disabled"; + }; + assist: assist@7c00 { compatible = "amlogic,meson-mx-assist", "syscon"; reg = <0x7c00 0x200>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 686c7b7c79d5..f80ddc98d3a2 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -317,6 +317,29 @@ mali: gpu@c0000 { }; }; /* end of / */ +&aiu { + compatible = "amlogic,aiu-meson8", "amlogic,aiu"; + clocks = <&clkc CLKID_AIU_GLUE>, + <&clkc CLKID_I2S_OUT>, + <&clkc CLKID_AOCLK_GATE>, + <&clkc CLKID_CTS_AMCLK>, + <&clkc CLKID_MIXER_IFACE>, + <&clkc CLKID_IEC958>, + <&clkc CLKID_IEC958_GATE>, + <&clkc CLKID_CTS_MCLK_I958>, + <&clkc CLKID_CTS_I958>; + clock-names = "pclk", + "i2s_pclk", + "i2s_aoclk", + "i2s_mclk", + "i2s_mixer", + "spdif_pclk", + "spdif_aoclk", + "spdif_mclk", + "spdif_mclk_sel"; + resets = <&reset RESET_AIU>; +}; + &aobus { pmu: pmu@e0 { compatible = "amlogic,meson8-pmu", "syscon"; @@ -340,6 +363,38 @@ gpio_ao: ao-bank@14 { gpio-ranges = <&pinctrl_aobus 0 0 16>; }; + i2s_am_clk_pins: i2s-am-clk-out { + mux { + groups = "i2s_am_clk_out_ao"; + function = "i2s_ao"; + bias-disable; + }; + }; + + i2s_out_ao_clk_pins: i2s-ao-clk-out { + mux { + groups = "i2s_ao_clk_out_ao"; + function = "i2s_ao"; + bias-disable; + }; + }; + + i2s_out_lr_clk_pins: i2s-lr-clk-out { + mux { + groups = "i2s_lr_clk_out_ao"; + function = "i2s_ao"; + bias-disable; + }; + }; + + i2s_out_ch01_ao_pins: i2s-out-ch01 { + mux { + groups = "i2s_out_ch01_ao"; + function = "i2s_ao"; + bias-disable; + }; + }; + uart_ao_a_pins: uart_ao_a { mux { groups = "uart_tx_ao_a", "uart_rx_ao_a"; @@ -460,6 +515,14 @@ mux { }; }; + spdif_out_pins: spdif-out { + mux { + groups = "spdif_out"; + function = "spdif"; + bias-disable; + }; + }; + spi_nor_pins: nor { mux { groups = "nor_d", "nor_q", "nor_c", "nor_cs"; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index c02b03cbcdf4..b49b7cbaed4e 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -279,6 +279,29 @@ mali: gpu@c0000 { }; }; /* end of / */ +&aiu { + compatible = "amlogic,aiu-meson8b", "amlogic,aiu"; + clocks = <&clkc CLKID_AIU_GLUE>, + <&clkc CLKID_I2S_OUT>, + <&clkc CLKID_AOCLK_GATE>, + <&clkc CLKID_CTS_AMCLK>, + <&clkc CLKID_MIXER_IFACE>, + <&clkc CLKID_IEC958>, + <&clkc CLKID_IEC958_GATE>, + <&clkc CLKID_CTS_MCLK_I958>, + <&clkc CLKID_CTS_I958>; + clock-names = "pclk", + "i2s_pclk", + "i2s_aoclk", + "i2s_mclk", + "i2s_mixer", + "spdif_pclk", + "spdif_aoclk", + "spdif_mclk", + "spdif_mclk_sel"; + resets = <&reset RESET_AIU>; +}; + &aobus { pmu: pmu@e0 { compatible = "amlogic,meson8b-pmu", "syscon"; @@ -302,6 +325,46 @@ gpio_ao: ao-bank@14 { gpio-ranges = <&pinctrl_aobus 0 0 16>; }; + i2s_am_clk_pins: i2s-am-clk-out { + mux { + groups = "i2s_am_clk_out"; + function = "i2s"; + bias-disable; + }; + }; + + i2s_out_ao_clk_pins: i2s-ao-clk-out { + mux { + groups = "i2s_ao_clk_out"; + function = "i2s"; + bias-disable; + }; + }; + + i2s_out_lr_clk_pins: i2s-lr-clk-out { + mux { + groups = "i2s_lr_clk_out"; + function = "i2s"; + bias-disable; + }; + }; + + i2s_out_ch01_ao_pins: i2s-out-ch01 { + mux { + groups = "i2s_out_01"; + function = "i2s"; + bias-disable; + }; + }; + + spdif_out_1_pins: spdif-out-1 { + mux { + groups = "spdif_out_1"; + function = "spdif_1"; + bias-disable; + }; + }; + uart_ao_a_pins: uart_ao_a { mux { groups = "uart_tx_ao_a", "uart_rx_ao_a"; -- 2.32.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] ARM: dts: meson: Add the AIU audio controller 2021-07-17 23:30 ` [PATCH v2 1/2] ARM: dts: meson: Add the AIU audio controller Martin Blumenstingl @ 2021-07-26 8:00 ` Neil Armstrong 0 siblings, 0 replies; 6+ messages in thread From: Neil Armstrong @ 2021-07-26 8:00 UTC (permalink / raw) To: Martin Blumenstingl, linux-amlogic Cc: khilman, linux-arm-kernel, linux-kernel On 18/07/2021 01:30, Martin Blumenstingl wrote: > Add the AIU audio controller to the Amlogic Meson6/8/8b/8m2 SoC DT. This > provides I2S and SPDIF outputs as well as codec glues for the internal > HDMI controller. > Also add the clock inputs and pin mux definitions on Meson8/8b/8m2. On > Meson6 this is omitted because we neither have a clock nor pin > controller node there yet. > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > --- > arch/arm/boot/dts/meson.dtsi | 12 +++++++ > arch/arm/boot/dts/meson8.dtsi | 63 ++++++++++++++++++++++++++++++++++ > arch/arm/boot/dts/meson8b.dtsi | 63 ++++++++++++++++++++++++++++++++++ > 3 files changed, 138 insertions(+) > > diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi > index bd0e864964e9..3be7cba603d5 100644 > --- a/arch/arm/boot/dts/meson.dtsi > +++ b/arch/arm/boot/dts/meson.dtsi > @@ -5,6 +5,7 @@ > > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/sound/meson-aiu.h> > > / { > #address-cells = <1>; > @@ -36,6 +37,17 @@ hhi: system-controller@4000 { > reg = <0x4000 0x400>; > }; > > + aiu: audio-controller@5400 { > + compatible = "amlogic,aiu"; > + #sound-dai-cells = <2>; > + sound-name-prefix = "AIU"; > + reg = <0x5400 0x2ac>; > + interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "i2s", "spdif"; > + status = "disabled"; > + }; > + > assist: assist@7c00 { > compatible = "amlogic,meson-mx-assist", "syscon"; > reg = <0x7c00 0x200>; > diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi > index 686c7b7c79d5..f80ddc98d3a2 100644 > --- a/arch/arm/boot/dts/meson8.dtsi > +++ b/arch/arm/boot/dts/meson8.dtsi > @@ -317,6 +317,29 @@ mali: gpu@c0000 { > }; > }; /* end of / */ > > +&aiu { > + compatible = "amlogic,aiu-meson8", "amlogic,aiu"; > + clocks = <&clkc CLKID_AIU_GLUE>, > + <&clkc CLKID_I2S_OUT>, > + <&clkc CLKID_AOCLK_GATE>, > + <&clkc CLKID_CTS_AMCLK>, > + <&clkc CLKID_MIXER_IFACE>, > + <&clkc CLKID_IEC958>, > + <&clkc CLKID_IEC958_GATE>, > + <&clkc CLKID_CTS_MCLK_I958>, > + <&clkc CLKID_CTS_I958>; > + clock-names = "pclk", > + "i2s_pclk", > + "i2s_aoclk", > + "i2s_mclk", > + "i2s_mixer", > + "spdif_pclk", > + "spdif_aoclk", > + "spdif_mclk", > + "spdif_mclk_sel"; > + resets = <&reset RESET_AIU>; > +}; > + > &aobus { > pmu: pmu@e0 { > compatible = "amlogic,meson8-pmu", "syscon"; > @@ -340,6 +363,38 @@ gpio_ao: ao-bank@14 { > gpio-ranges = <&pinctrl_aobus 0 0 16>; > }; > > + i2s_am_clk_pins: i2s-am-clk-out { > + mux { > + groups = "i2s_am_clk_out_ao"; > + function = "i2s_ao"; > + bias-disable; > + }; > + }; > + > + i2s_out_ao_clk_pins: i2s-ao-clk-out { > + mux { > + groups = "i2s_ao_clk_out_ao"; > + function = "i2s_ao"; > + bias-disable; > + }; > + }; > + > + i2s_out_lr_clk_pins: i2s-lr-clk-out { > + mux { > + groups = "i2s_lr_clk_out_ao"; > + function = "i2s_ao"; > + bias-disable; > + }; > + }; > + > + i2s_out_ch01_ao_pins: i2s-out-ch01 { > + mux { > + groups = "i2s_out_ch01_ao"; > + function = "i2s_ao"; > + bias-disable; > + }; > + }; > + > uart_ao_a_pins: uart_ao_a { > mux { > groups = "uart_tx_ao_a", "uart_rx_ao_a"; > @@ -460,6 +515,14 @@ mux { > }; > }; > > + spdif_out_pins: spdif-out { > + mux { > + groups = "spdif_out"; > + function = "spdif"; > + bias-disable; > + }; > + }; > + > spi_nor_pins: nor { > mux { > groups = "nor_d", "nor_q", "nor_c", "nor_cs"; > diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi > index c02b03cbcdf4..b49b7cbaed4e 100644 > --- a/arch/arm/boot/dts/meson8b.dtsi > +++ b/arch/arm/boot/dts/meson8b.dtsi > @@ -279,6 +279,29 @@ mali: gpu@c0000 { > }; > }; /* end of / */ > > +&aiu { > + compatible = "amlogic,aiu-meson8b", "amlogic,aiu"; > + clocks = <&clkc CLKID_AIU_GLUE>, > + <&clkc CLKID_I2S_OUT>, > + <&clkc CLKID_AOCLK_GATE>, > + <&clkc CLKID_CTS_AMCLK>, > + <&clkc CLKID_MIXER_IFACE>, > + <&clkc CLKID_IEC958>, > + <&clkc CLKID_IEC958_GATE>, > + <&clkc CLKID_CTS_MCLK_I958>, > + <&clkc CLKID_CTS_I958>; > + clock-names = "pclk", > + "i2s_pclk", > + "i2s_aoclk", > + "i2s_mclk", > + "i2s_mixer", > + "spdif_pclk", > + "spdif_aoclk", > + "spdif_mclk", > + "spdif_mclk_sel"; > + resets = <&reset RESET_AIU>; > +}; > + > &aobus { > pmu: pmu@e0 { > compatible = "amlogic,meson8b-pmu", "syscon"; > @@ -302,6 +325,46 @@ gpio_ao: ao-bank@14 { > gpio-ranges = <&pinctrl_aobus 0 0 16>; > }; > > + i2s_am_clk_pins: i2s-am-clk-out { > + mux { > + groups = "i2s_am_clk_out"; > + function = "i2s"; > + bias-disable; > + }; > + }; > + > + i2s_out_ao_clk_pins: i2s-ao-clk-out { > + mux { > + groups = "i2s_ao_clk_out"; > + function = "i2s"; > + bias-disable; > + }; > + }; > + > + i2s_out_lr_clk_pins: i2s-lr-clk-out { > + mux { > + groups = "i2s_lr_clk_out"; > + function = "i2s"; > + bias-disable; > + }; > + }; > + > + i2s_out_ch01_ao_pins: i2s-out-ch01 { > + mux { > + groups = "i2s_out_01"; > + function = "i2s"; > + bias-disable; > + }; > + }; > + > + spdif_out_1_pins: spdif-out-1 { > + mux { > + groups = "spdif_out_1"; > + function = "spdif_1"; > + bias-disable; > + }; > + }; > + > uart_ao_a_pins: uart_ao_a { > mux { > groups = "uart_tx_ao_a", "uart_rx_ao_a"; > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] ARM: dts: meson8b: ec100: wire up the RT5640 audio codec 2021-07-17 23:30 [PATCH v2 0/2] Meson8/Meson8b: sound card support Martin Blumenstingl 2021-07-17 23:30 ` [PATCH v2 1/2] ARM: dts: meson: Add the AIU audio controller Martin Blumenstingl @ 2021-07-17 23:30 ` Martin Blumenstingl 2021-07-26 8:00 ` Neil Armstrong 2021-07-26 8:12 ` [PATCH v2 0/2] Meson8/Meson8b: sound card support Neil Armstrong 2 siblings, 1 reply; 6+ messages in thread From: Martin Blumenstingl @ 2021-07-17 23:30 UTC (permalink / raw) To: linux-amlogic Cc: narmstrong, khilman, linux-arm-kernel, linux-kernel, Martin Blumenstingl The Realtek RT5640 codec is connected to the SoC's I2S interface. Describe this in the .dts together with the codec's LDO1 enable GPIO so audio can be played on the Endless Mini. While here, add a note about the realtek,ldo1-en-gpios for which the EC100 uses GPIO_BSD_EN. Due to driver limitations this pin cannot be used currently. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- arch/arm/boot/dts/meson8b-ec100.dts | 44 +++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 8e48ccc6b634..e404bdccdab9 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -96,6 +96,32 @@ rtc32k_xtal: rtc32k-xtal-clk { #clock-cells = <0>; }; + sound { + compatible = "amlogic,gx-sound-card"; + model = "M8B-EC100"; + + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-rates = <270950400>, + <294912000>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&rt5640>; + }; + }; + }; + usb_vbus: regulator-usb-vbus { /* * Silergy SY6288CCAC-GP 2A Power Distribution Switch. @@ -242,6 +268,14 @@ vddee: regulator-vddee { }; }; +&aiu { + status = "okay"; + + pinctrl-0 = <&i2s_am_clk_pins>, <&i2s_out_ao_clk_pins>, + <&i2s_out_lr_clk_pins>, <&i2s_out_ch01_ao_pins>; + pinctrl-names = "default"; +}; + &cpu0 { cpu-supply = <&vcck>; }; @@ -283,9 +317,19 @@ &i2c_A { rt5640: codec@1c { compatible = "realtek,rt5640"; + reg = <0x1c>; + + #sound-dai-cells = <0>; + interrupt-parent = <&gpio_intc>; interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */ + + /* + * TODO: realtek,ldo1-en-gpios is connected to GPIO_BSD_EN. + * We currently cannot configure this pin correctly. + * Luckily for us it's in the "right" state by default. + */ realtek,in1-differential; }; }; -- 2.32.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: meson8b: ec100: wire up the RT5640 audio codec 2021-07-17 23:30 ` [PATCH v2 2/2] ARM: dts: meson8b: ec100: wire up the RT5640 audio codec Martin Blumenstingl @ 2021-07-26 8:00 ` Neil Armstrong 0 siblings, 0 replies; 6+ messages in thread From: Neil Armstrong @ 2021-07-26 8:00 UTC (permalink / raw) To: Martin Blumenstingl, linux-amlogic Cc: khilman, linux-arm-kernel, linux-kernel On 18/07/2021 01:30, Martin Blumenstingl wrote: > The Realtek RT5640 codec is connected to the SoC's I2S interface. > Describe this in the .dts together with the codec's LDO1 enable GPIO so > audio can be played on the Endless Mini. > While here, add a note about the realtek,ldo1-en-gpios for which the > EC100 uses GPIO_BSD_EN. Due to driver limitations this pin cannot be > used currently. > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > --- > arch/arm/boot/dts/meson8b-ec100.dts | 44 +++++++++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts > index 8e48ccc6b634..e404bdccdab9 100644 > --- a/arch/arm/boot/dts/meson8b-ec100.dts > +++ b/arch/arm/boot/dts/meson8b-ec100.dts > @@ -96,6 +96,32 @@ rtc32k_xtal: rtc32k-xtal-clk { > #clock-cells = <0>; > }; > > + sound { > + compatible = "amlogic,gx-sound-card"; > + model = "M8B-EC100"; > + > + assigned-clocks = <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>, > + <&clkc CLKID_MPLL2>; > + assigned-clock-rates = <270950400>, > + <294912000>, > + <393216000>; > + > + dai-link-0 { > + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; > + }; > + > + dai-link-1 { > + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; > + dai-format = "i2s"; > + mclk-fs = <256>; > + > + codec-0 { > + sound-dai = <&rt5640>; > + }; > + }; > + }; > + > usb_vbus: regulator-usb-vbus { > /* > * Silergy SY6288CCAC-GP 2A Power Distribution Switch. > @@ -242,6 +268,14 @@ vddee: regulator-vddee { > }; > }; > > +&aiu { > + status = "okay"; > + > + pinctrl-0 = <&i2s_am_clk_pins>, <&i2s_out_ao_clk_pins>, > + <&i2s_out_lr_clk_pins>, <&i2s_out_ch01_ao_pins>; > + pinctrl-names = "default"; > +}; > + > &cpu0 { > cpu-supply = <&vcck>; > }; > @@ -283,9 +317,19 @@ &i2c_A { > > rt5640: codec@1c { > compatible = "realtek,rt5640"; > + > reg = <0x1c>; > + > + #sound-dai-cells = <0>; > + > interrupt-parent = <&gpio_intc>; > interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */ > + > + /* > + * TODO: realtek,ldo1-en-gpios is connected to GPIO_BSD_EN. > + * We currently cannot configure this pin correctly. > + * Luckily for us it's in the "right" state by default. > + */ > realtek,in1-differential; > }; > }; > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 0/2] Meson8/Meson8b: sound card support 2021-07-17 23:30 [PATCH v2 0/2] Meson8/Meson8b: sound card support Martin Blumenstingl 2021-07-17 23:30 ` [PATCH v2 1/2] ARM: dts: meson: Add the AIU audio controller Martin Blumenstingl 2021-07-17 23:30 ` [PATCH v2 2/2] ARM: dts: meson8b: ec100: wire up the RT5640 audio codec Martin Blumenstingl @ 2021-07-26 8:12 ` Neil Armstrong 2 siblings, 0 replies; 6+ messages in thread From: Neil Armstrong @ 2021-07-26 8:12 UTC (permalink / raw) To: linux-amlogic, Martin Blumenstingl Cc: Neil Armstrong, linux-arm-kernel, linux-kernel, khilman Hi, On Sun, 18 Jul 2021 01:30:28 +0200, Martin Blumenstingl wrote: > This series adds the AIU audio controller for Meson8 and Meson8b. The > AIU audio controller has been found to work fine with out-of-tree > patches for HDMI audio (over I2S). SPDIF output also works (tested with > a scope). > Endless Mini (EC-100) has an RT5640 audio codec. The driver for this > codec can be selected since commit 08c56cab302a05 ("ASoC: rt5640: Make > codec selectable"), which is part of Linux 5.14-rc1. While support is > not perfect (due to us lacking proper support for configuring > GPIO_BSD_EN) audio output still works fine. > > [...] Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (for-next) [1/2] ARM: dts: meson: Add the AIU audio controller https://git.kernel.org/amlogic/c/4f8ca13df1d5ff1c09e06acbd1bc7d4d8510dfc0 [2/2] ARM: dts: meson8b: ec100: wire up the RT5640 audio codec https://git.kernel.org/amlogic/c/0bd475db1a5d0cd89b435ff6bfee083aca5d104a -- Neil _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-07-26 8:14 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-07-17 23:30 [PATCH v2 0/2] Meson8/Meson8b: sound card support Martin Blumenstingl 2021-07-17 23:30 ` [PATCH v2 1/2] ARM: dts: meson: Add the AIU audio controller Martin Blumenstingl 2021-07-26 8:00 ` Neil Armstrong 2021-07-17 23:30 ` [PATCH v2 2/2] ARM: dts: meson8b: ec100: wire up the RT5640 audio codec Martin Blumenstingl 2021-07-26 8:00 ` Neil Armstrong 2021-07-26 8:12 ` [PATCH v2 0/2] Meson8/Meson8b: sound card support Neil Armstrong
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).