* [PATCH 01/33] doc: boards: amlogic: update documentation for index page
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 02/33] doc: boards: amlogic: update documentation for boot-flow Christian Hewitt
` (32 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation. Notably we remove all the board names from the
feature matrix to reduce table width. SoC types have been added to the
titles in individual board documents so readers can still correlate a
board against the features. This makes it easier to add new boards to
to the document in the future.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/index.rst | 137 +++++++++++++++++-------------------
1 file changed, 64 insertions(+), 73 deletions(-)
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index e51b904582..3eb1cf46e0 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -10,74 +10,65 @@ An up-do-date matrix is also available on: http://linux-meson.com
This matrix concerns the actual source code version.
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| | S905 | S905X | S912 | A113X | S905X2 | S922X | S905X3 |
-| | | S805X | S905D | | S905D2 | A311D | S905D3 |
-| | | S905W | | | S905Y2 | | |
-+===============================+===========+=================+==============+=============+============+=============+==============+
-| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 |
-| | Nanopi-K2 | Khadas-VIM | Libretech-PC | JetHub J100 | SEI510 | Khadas-VIM3 | Khadas-VIM3L |
-| | P200 | LibreTech-CC v1 | WeTek Core2 | | Radxa Zero | GT-King/Pro | Odroid-C4 |
-| | P201 | LibreTech-AC v2 | | | | GSKing-X | Odroid-HC4 |
-| | | JetHub J80 | | | | Odroid-Go- | BananaPi-M5 |
-| | | | | | | Ultra | |
-| | | | | | | Odroid-N2L | |
-| | | | | | | BPI-M4 | |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| Pinctrl/GPIO | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| Clock Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| PWM | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| Reset Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| Infrared Decoder | No | No | No | No | No | No | No |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| Ethernet | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| Multi-core | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| Fuse access | **Yes** | **Yes** |**Yes** |**Yes** |**Yes** |**Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| SPI (FC) | **Yes** | **Yes** | **Yes** | **Yes** |**Yes** | **Yes** | No |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| SPI (CC) | No | No | No | No | No | No | No |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| I2C | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| USB | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| USB OTG | No | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| eMMC | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| SDCard | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| NAND | No | No | No | No | No | No | No |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| ADC | **Yes** | **Yes** | **Yes** | **Yes** | No | No | No |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| CVBS Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| HDMI Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| CEC | No | No | No | *N/A* | No | No | No |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| Thermal Sensor | No | No | No | No | No | No | No |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| LCD/LVDS Output | No | *N/A* | No | No | No | No | No |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| MIPI DSI Output | *N/A* | *N/A* | *N/A* | No | No | No | No |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| SoC (version) information | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| PCIe (+NVMe) | *N/A* | *N/A* | *N/A* | **Yes** | **Yes** | **Yes** | **Yes** |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
-| Watchdog | *N/A* | **Yes** | *N/A* | *N/A* | *N/A* | *N/A* | *N/A* |
-+-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| SoCs | S905 | S805X | S912 | A113X | S905X2 | S922X | S905X3 |
+| | | S905X | S905D | | S905D2 | A311D | S905D3 |
+| | | S905W | | | S905Y2 | | |
++===================+===========+==========+==========+==========+==========+==========+==========+
+| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| Pinctrl/GPIO | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| Clock Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| PWM | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| Reset Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| Infrared Decoder | No | No | No | No | No | No | No |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| Ethernet | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| Multi-core | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| Fuse access | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| SPI (FC) | **Yes** | **Yes** | **Yes** | **Yes** |**Yes** | **Yes** | No |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| SPI (CC) | No | No | No | No | No | No | No |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| I2C | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| USB | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| USB OTG | No | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| eMMC | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| SDCard | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| NAND | No | No | No | No | No | No | No |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| ADC | **Yes** | **Yes** | **Yes** | **Yes** | No | No | No |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| CVBS Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| HDMI Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| CEC | No | No | No | *N/A* | No | No | No |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| Thermal Sensor | No | No | No | No | No | No | No |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| LCD/LVDS Output | No | *N/A* | No | No | No | No | No |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| MIPI DSI Output | *N/A* | *N/A* | *N/A* | No | No | No | No |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| SoC Rev/Info | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| PCIe (+NVMe) | *N/A* | *N/A* | *N/A* | **Yes** | **Yes** | **Yes** | **Yes** |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
+| Watchdog | *N/A* | **Yes** | *N/A* | *N/A* | *N/A* | *N/A* | *N/A* |
++-------------------+-----------+----------+----------+----------+----------+----------+----------+
Boot Documentation
------------------
@@ -85,8 +76,8 @@ Boot Documentation
.. toctree::
:maxdepth: 1
- pre-generated-fip
boot-flow
+ pre-generated-fip
Board Documentation
-------------------
@@ -96,12 +87,12 @@ Board Documentation
beelink-gtking
beelink-gtkingpro
- jethub-j100
jethub-j80
+ jethub-j100
+ khadas-vim
khadas-vim2
- khadas-vim3l
khadas-vim3
- khadas-vim
+ khadas-vim3l
libretech-ac
libretech-cc
nanopi-k2
@@ -115,9 +106,9 @@ Board Documentation
p212
q200
radxa-zero
- s400
sei510
sei610
+ s400
u200
wetek-core2
w400
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 02/33] doc: boards: amlogic: update documentation for boot-flow
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
2023-03-20 11:45 ` [PATCH 01/33] doc: boards: amlogic: update documentation for index page Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 03/33] doc: boards: amlogic: update documentation for pre-generated-fip's Christian Hewitt
` (31 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/boot-flow.rst | 178 ++++++++++++++++----------------
1 file changed, 90 insertions(+), 88 deletions(-)
diff --git a/doc/board/amlogic/boot-flow.rst b/doc/board/amlogic/boot-flow.rst
index 2049672b1b..041297c512 100644
--- a/doc/board/amlogic/boot-flow.rst
+++ b/doc/board/amlogic/boot-flow.rst
@@ -3,132 +3,134 @@
Amlogic SoC Boot Flow
=====================
-The Amlogic SoCs have a pre-defined boot sequence in the SoC ROM code. Here are
-the possible boot sources of different SoC families supported by U-Boot:
+Amlogic SoCs follow a pre-defined boot sequence stored in SoC ROM code. The possible boot
+sequences of the different SoC families are:
-GX* & AXG family
+GX* & AXG Family
----------------
-+----------+--------------------+-------+-------+---------------+---------------+
-| | 1 | 2 | 3 | 4 | 5 |
-+==========+====================+=======+=======+===============+===============+
-| S905 | POC=0: SPI NOR | eMMC | NAND | SD Card | USB Device |
-| S905X | | | | | |
-| S905L | | | | | |
-| S905W | | | | | |
-| S912 | | | | | |
-+----------+--------------------+-------+-------+---------------+---------------+
-| S805X | POC=0: SPI NOR | eMMC | NAND | USB Device | - |
-| A113D | | | | | |
-| A113X | | | | | |
-+----------+--------------------+-------+-------+---------------+---------------+
++----------+-------------------+---------+---------+---------+---------+
+| | 1 | 2 | 3 | 4 | 5 |
++==========+===================+=========+=========+=========+=========+
+| S905 | POC=0: SPI NOR | eMMC | NAND | SD | USB |
+| S905D | | | | | |
+| S905L | | | | | |
+| S905W | | | | | |
+| S905X | | | | | |
+| S905Y | | | | | |
+| S912 | | | | | |
++----------+-------------------+---------+---------+---------+---------+
+| S805X | POC=0: SPI NOR | eMMC | NAND | USB | - |
+| A113D | | | | | |
+| A113X | | | | | |
++----------+-------------------+---------+---------+---------+---------+
POC pin: `NAND_CLE`
-Some boards provide a button to force USB BOOT which disables the eMMC clock signal
-to bypass the eMMC stage. Others have removable eMMC modules; removing the eMMC and
-SDCard will allow boot from USB.
+Some boards provide a button to force USB boot by disabling the eMMC clock signal and
+allowing the eMMC step to be bypassed. Others have removable eMMC modules; removing an
+eMMC module and SD card will allow boot from USB.
-An exception is the lafrite board (aml-s805x-xx) which has no SDCard slot and boots
-from SPI. The only ways to boot the lafrite board from USB are:
+An exception is the Libre Computer AML-S805X-XX (LaFrite) board which has no SD card
+slot and boots from SPI. Booting a LaFrite board from USB requires either:
- - Erase the first sectors of SPI NOR flash
- - Insert an HDMI boot plug forcing boot over USB
+ - Erasing the first sectors of SPI NOR flash
+ - Inserting an HDMI boot plug forcing boot over USB
-The VIM1 and initial VIM2 boards provide a test point on the eMMC signals to block
-the storage from answering and continue to the next boot step.
+The VIM1 and initial VIM2 boards provide a test point on the eMMC signals to block the
+storage from answering, allowing boot to continue with the next boot step.
-The USB Device boot uses the first USB interface. On some boards this port is only
-available on an USB-A type connector and needs an special Type-A to Type-A cable to
-communicate with the BootROM.
+USB boot uses the first USB interface. On some boards this port is only available on a
+USB-A type connector and requires a special Type-A to Type-A cable to communicate with
+the BootROM.
-G12* & SM1 family
+G12* & SM1 Family
-----------------
-+-------+-------+-------+---------------+---------------+---------------+---------------+
-| POC0 | POC1 | POC2 | 1 | 2 | 3 | 4 |
-+=======+=======+=======+===============+===============+===============+===============+
-| 0 | 0 | 0 | USB Device | SPI NOR | NAND/eMMC | SDCard |
-+-------+-------+-------+---------------+---------------+---------------+---------------+
-| 0 | 0 | 1 | USB Device | NAND/eMMC | SDCard | - |
-+-------+-------+-------+---------------+---------------+---------------+---------------+
-| 0 | 1 | 0 | SPI NOR | NAND/eMMC | SDCard | USB Device |
-+-------+-------+-------+---------------+---------------+---------------+---------------+
-| 0 | 1 | 1 | SPI NAND | NAND/eMMC | USB Device | - |
-+-------+-------+-------+---------------+---------------+---------------+---------------+
-| 1 | 0 | 0 | USB Device | SPI NOR | NAND/eMMC | SDCard |
-+-------+-------+-------+---------------+---------------+---------------+---------------+
-| 1 | 0 | 1 | USB Device | NAND/eMMC | SDCard | - |
-+-------+-------+-------+---------------+---------------+---------------+---------------+
-| 1 | 1 | 0 | SPI NOR | NAND/eMMC | SDCard | USB Device |
-+-------+-------+-------+---------------+---------------+---------------+---------------+
-| 1 | 1 | 1 | NAND/eMMC | SDCard | USB Device | - |
-+-------+-------+-------+---------------+---------------+---------------+---------------+
-
-The last option (1/1/1) is the normal default seen on production devices.
++-------+-------+-------+------------+------------+------------+-----------+
+| POC0 | POC1 | POC2 | 1 | 2 | 3 | 4 |
++=======+=======+=======+============+============+============+===========+
+| 0 | 0 | 0 | USB | SPI-NOR | NAND/eMMC | SD |
++-------+-------+-------+------------+------------+-------------+----------+
+| 0 | 0 | 1 | USB | NAND/eMMC | SD | - |
++-------+-------+-------+------------+------------+------------+-----------+
+| 0 | 1 | 0 | SPI-NOR | NAND/eMMC | SD | USB |
++-------+-------+-------+------------+------------+------------+-----------+
+| 0 | 1 | 1 | SPI-NAND | NAND/eMMC | USB | - |
++-------+-------+-------+------------+------------+------------+-----------+
+| 1 | 0 | 0 | USB | SPI-NOR | NAND/eMMC | SD |
++-------+-------+-------+------------+------------+------------+-----------+
+| 1 | 0 | 1 | USB | NAND/eMMC | SD | - |
++-------+-------+-------+------------+------------+------------+-----------+
+| 1 | 1 | 0 | SPI-NOR | NAND/eMMC | SD | USB |
++-------+-------+-------+------------+------------+------------+-----------+
+| 1 | 1 | 1 | NAND/eMMC | SD | USB | - |
++-------+-------+-------+------------+------------+------------+-----------+
+
+The last option (1/1/1) is the normal default seen on production devices:
* POC0 pin: `BOOT_4` (0 and all other 1 means SPI NAND boot first)
* POC1 pin: `BOOT_5` (0 and all other 1 means USB Device boot first
* POC2 pin: `BOOT_6` (0 and all other 1 means SPI NOR boot first)
Most boards provide a button to force USB BOOT which lowers `BOOT_5` to 0. Some boards
-provide a test point on the eMMC or SPI NOR clock signals to block the storage from
-answering and continue to the next boot step.
+provide a test point on eMMC or SPI NOR clock signals to block storage from answering
+and allowing boot to continue from the next boot step.
-The Khadas VIM3/3L boards embed a microcontroller which sets POC signals according
-to its configuration or a specific key press sequence to either boot from SPI NOR
-or eMMC then SDCard, or boot as an USB Device.
+The Khadas VIM3/3L boards embed a microcontroller which sets POC signals according to
+its configuration or a specific key press sequence to either boot from SPI NOR or eMMC
+then SD card, or boot as a USB device.
-The Odroid N2/N2+ has a hardware switch to select between SPI NOR or eMMC boot.
+The Odroid N2/N2+ has a hardware switch to select between SPI NOR or eMMC boot. The
+Odroid HC4 has a button to disable SPI-NOR allowing boot from SD card.
Boot Modes
----------
- * SDCard
+ * SD
-The BootROM fetches the first SDCard sectors in one sequence, then checks the content
-of the data. The BootROM expects to find the FIP binary in sector 1, 512 bytes offset
-from the start.
+The BootROM fetches the first SD card sectors in one sequence then checks the content of
+the data. It expects to find the FIP binary in sector 1, 512 bytes offset from the start.
* eMMC
-The BootROM fetches the first sectors in one sequence, first on the main partition,
-and then on the Boot0 followed by Boot1 HW partitions. After each read, the BootROM
-checks the data and looks to the next partition if it fails. The BootROM expects to
-find the FIP binary in sector 1, 512 bytes offset from the start.
+The BootROM fetches the first sectors of the main partition in one sequence then checks
+the content of the data. On GXL and newer boards it expects to find the FIP binary in
+sector 1, 512 bytes offset from the start. If not found it checks the boot0 partition,
+then the boot1 partition. On GXBB it expects to find the FIP binary at an offset that
+conflicts with MBR partition tables, but this has been worked around (thus avoiding the
+need for a partition scheme that relocates the MBR). For a more detailed explanation
+please see: https://github.com/LibreELEC/amlogic-boot-fip/pull/8
- * SPI NOR
+ * SPI-NOR
-The BootROM fetches the first SPI NOR sectors in one sequence, then checks the content
-of the data. The BootROM expects to find the FIP binary in sector 1, 512 bytes offset
-from the start.
+The BootROM fetches the first SPI NOR sectors in one sequence then checks the content of
+the data. It expects to find the FIP binary in sector 1, 512 bytes offset from the start.
- * NAND & SPI NAND
+ * NAND & SPI-NAND
These modes are rarely used in open platforms and no details are available.
- * USB Device
+ * USB
-The BootROM sets the USB Gadget interface to serve a custom USB protocol with the
-USB ID 1b8e:c003. The Amlogic `update` utility is designed to use this protocol. It
-is also implemented in the Amlogic Vendor U-Boot.
+The BootROM supports a custom USB protocol and sets the USB Gadget interface to use the
+USB ID 1b8e:c003. The Amlogic `update` utility uses this protocol. It is also supported
+in the Amlogic vendor U-Boot sources.
-The open-source `pyamlboot` utility https://github.com/superna9999/pyamlboot also
-implements this protocol and can load U-Boot in memory in order to start the SoC
-without any attached storage or to recover from a failed/incorrect image flash.
+The `pyamlboot` utility https://github.com/superna9999/pyamlboot is open-source and also
+implements the USB protocol. It can load U-Boot into memory to start the SoC without the
+storage being attached, or to recover the device from a failed/incorrect image flash.
-HDMI Recovery
--------------
+HDMI Recovery Dongle
+--------------------
-The BootROM also briefly reads 8 bytes at address I2C 0x52 offset 0xf8 (248) on the
-HDMI DDC bus. If the content is `boot@USB` it will force USB boot mode. If the content
-is `boot@SDC` it will force SDCard boot mode.
+The BootROM also reads 8 bytes at address I2C 0x52 offset 0xf8 (248) on the HDMI DDC bus
+during startup. The content `boot@USB` forces USB boot. The content `boot@SDC` forces SD
+card boot. The content `boot@SPI` forces SPI-NOT boot. If an SD card or USB device does
+not enumerate the BootROM continues with the normal boot sequence.
-If USB Device doesn't enumerate or SD Card boot step doesn't work, the BootROM will
-continue with the normal boot sequence.
+HDMI boot dongles can be created by connecting a 256bytes EEPROM set to answer on address
+0x52, with `boot@USB` or `boot@SDC` or `boot@SPI` programmed at offset 0xf8 (248).
-Special boot dongles can be built by connecting a 256bytes EEPROM set to answer on
-address 0x52, and program `boot@USB` or `boot@SDC` at offset 0xf8 (248).
-
-Note: If the SoC is booted with USB Device forced at first step, it will keep the boot
-order on warm reboot. Only cold reboot (power removed) will reset the boot order.
+If the SoC is booted with USB Device forced at first step, it will retain the forced boot
+order on warm reboot. Only cold reboot (removing power) will reset the boot order.
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 03/33] doc: boards: amlogic: update documentation for pre-generated-fip's
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
2023-03-20 11:45 ` [PATCH 01/33] doc: boards: amlogic: update documentation for index page Christian Hewitt
2023-03-20 11:45 ` [PATCH 02/33] doc: boards: amlogic: update documentation for boot-flow Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 04/33] doc: boards: amlogic: update documentation for Beelink GT-King Christian Hewitt
` (30 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/pre-generated-fip.rst | 138 +++++++++++++++---------
1 file changed, 88 insertions(+), 50 deletions(-)
diff --git a/doc/board/amlogic/pre-generated-fip.rst b/doc/board/amlogic/pre-generated-fip.rst
index c63ea616b8..6a43d776d4 100644
--- a/doc/board/amlogic/pre-generated-fip.rst
+++ b/doc/board/amlogic/pre-generated-fip.rst
@@ -1,24 +1,57 @@
.. SPDX-License-Identifier: GPL-2.0+
-Pre-Generated FIP file set
-==========================
+Pre-Generated FIP File Repo
+===========================
-The Amlogic ARMv8 based SoCs uses a vendor variant of the Trusted Firmware-A
-boot architecture.
+Pre-built Flattened Image Package (FIP) sources and Amlogic signing binaries for many
+commercially available boards and some Android STB devices are collected for use with
+distro build-systems here: https://github.com/LibreELEC/amlogic-boot-fip
-You can find documentation on the Trusted Firmware-A architecture on: https://www.trustedfirmware.org/projects/tf-a/
+Using the pre-built FIP sources to sign U-Boot is simple, e.g. for LePotato:
-The Trusted Firmware-A uses the following boot elements (simplified):
+.. code-block:: bash
+
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh lepotato /path/to/u-boot/u-boot.bin my-output-dir
+
+Then write U-Boot to SD or eMMC with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
+
+Files Included
+--------------
+
+Amlogic ARMv8 SoCs use a vendor modified variant of the ARM Trusted Firmware-A boot
+architecture. See documentation here: https://www.trustedfirmware.org/projects/tf-a/
+
+Trusted Firmware-A uses the following boot elements (simplified):
+
+- BL1: First boot step implemented in ROM on Amlogic SoCs
+
+- BL2: Second boot step used to initialize the SoC main clocks & DDR interface. BL21
+ and ACS board-specific binaries must be "inserted" into the BL2 binary before signing
+ and packaging in order to be flashed on the platform
+
+- BL30: Amlogic Secure Co-Processor (SCP) firmware used to handle all system management
+ operations (DVFS, suspend/resume, ..)
+
+- BL301: Amlogic Secure Co-Processor (SCP) board-specific firmware "plug-in" to handle
+ custom DVFS & suspend-resume parameters
-- BL1: First boot step, implemented in ROM on Amlogic SoCs
-- BL2: Second boot step, used to initialize the SoC main clocks & DDR interface. The BL21 and ACS board-specific binaries are "inserted" in the BL32 binary before signing/packaging in order to be flashed on the platform.
-- BL30: Amlogic Secure Co-Processor (SCP) firmware used to handle all the system management operations (DVFS, suspend/resume, ...)
-- BL301: Amlogic Secure Co-Processor (SCP) board-specific firmware "plug-in" to handle custom DVFS & suspend-resume parameters
- BL31: Initializes the interrupt controller and the system management interface (PSCI)
-- BL32 (Optional): Is the Trusted Environment Execution (TEE) Operating System to run secure Trusted Apps, e.g. OP-TEE
+
+- BL32 (Optional): Is the Trusted Environment Execution (TEE) Operating System used to
+ run secure Trusted Apps, e.g. OP-TEE
+
- BL33: Is the last non-secure step, usually U-Boot which loads Linux
-Amlogic provides in binary form:
+Amlogic sources provide the following binaries:
- bl2.bin
- bl30.bin
@@ -26,10 +59,50 @@ Amlogic provides in binary form:
- bl31.img
- bl32.bin
-And for lastest SoCs, Amlogic also provides the DDR drivers used by the BL2 binary.
+For G12A/B and SM1 Amlogic also provides DDR drivers used by the BL2 binary:
+
+- ddr4_1d.fw
+- ddr4_2d.fw
+- ddr3_1d.fw
+- piei.fw
+- lpddr4_1d.fw
+- lpddr4_2d.fw
+- diag_lpddr4.fw
+- aml_ddr.fw
+
+The following files are generated from the Amlogic U-Boot fork:
+
+- acs.bin: Contains the PLL & DDR parameters for the board
+- bl301.bin: Contains the DVFS & suspend-resume handling code for the board
+- bl33.bin: U-boot binary image
+
+The acs.bin and bl301.bin files use U-Boot GPL-2.0+ headers and U-Boot build system and
+are thus considered to be issued from GPL-2.0+ source code.
+
+Amlogic alo provides pre-compiled x86_64 and Python2 binaries:
-The licence of these files wasn't clear until recently, the currently Amlogic distribution licence
-is the following:
+- aml_encrypt_gxb
+- aml_encrypt_gxl
+- aml_encrypt_g12a
+- aml_encrypt_g12b
+- acs_tool.pyc
+
+The repo replaces the pre-compiled acs_tool.pyc with a Python3 acs_tool.py that can be
+used with modern build hosts.
+
+The repo also provides the following files used with GXBB boards:
+
+- bl1.bin.hardkernel
+- aml_chksum
+
+The repo also supports the open-source 'gxlimg' signing tool that can be used to sign
+U-Boot binaries for GXL/GXM/G12A/G12B/SM1 boards: https://github.com/repk/gxlimg
+
+Licensing
+---------
+
+The licence of Amlogic provided binaries was not historically clear but has now been
+clarified. The current Amlogic distribution licence is below:
.. code-block:: C
@@ -56,38 +129,3 @@ is the following:
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-The following files are generated from the Amlogic U-Boot fork:
-
-- acs.bin: contains the PLL & DDR parameters for the board
-- bl301.bin: contains the DVFS & suspend-resume handling code for the board
-- bl33.bin: U-boot binary image
-
-The acs.bin & bl301.bin uses the U-Boot GPL-2.0+ headers & build systems, thus those
-are considered issued from GPL-2.0+ source code.
-
-The tools used to sign & package those binary files are delivered in binary format
-for Intel x86-64 and Python 2.x only.
-
-A collection of pre-built with the corresponding Amlogic binaries for the common
-commercially available boards were collected in the https://github.com/LibreELEC/amlogic-boot-fip
-repository.
-
-Using this collection for a commercially available board is very easy.
-
-Here considering the Libre Computer AML-S905X-CC, which codename is `lepotato`:
-
-.. code-block:: bash
-
- $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
- $ cd amlogic-boot-fip
- $ mkdir my-output-dir
- $ ./build-fip.sh lepotato /path/to/u-boot/u-boot.bin my-output-dir
-
-and then write the image to SD with:
-
-.. code-block:: bash
-
- $ DEV=/dev/your_sd_device
- $ dd if=my-output-dir/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=my-output-dir/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 04/33] doc: boards: amlogic: update documentation for Beelink GT-King
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (2 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 03/33] doc: boards: amlogic: update documentation for pre-generated-fip's Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 05/33] doc: boards: amlogic: update documentation for Beelink GT-King Pro Christian Hewitt
` (29 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/beelink-gtking.rst | 120 +++++++++++++--------------
1 file changed, 60 insertions(+), 60 deletions(-)
diff --git a/doc/board/amlogic/beelink-gtking.rst b/doc/board/amlogic/beelink-gtking.rst
index 2fb50c5f7b..342887d584 100644
--- a/doc/board/amlogic/beelink-gtking.rst
+++ b/doc/board/amlogic/beelink-gtking.rst
@@ -1,10 +1,10 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Beelink GT-King
-==========================
+U-Boot for Beelink GT-King (S922X)
+==================================
-The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
-board with an S922X-H chip.
+The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference board with an
+S922X-H chip and the following specifications:
- 4GB LPDDR4 RAM
- 64GB eMMC storage
@@ -18,10 +18,10 @@ board with an S922X-H chip.
- IR receiver
- 1x micro SD card slot
-Beelink do not provide public schematics, but have been willing
-to share them with known distro developers on request.
+Beelink do not provide public schematics, but have been willing to share them with known
+distro developers to assist with development.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -30,21 +30,21 @@ U-Boot compilation
$ make beelink-gtking_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-Amlogic does not provide sources for the firmware and for tools needed
-to create the bootloader image. Beelink have provided the Amlogic "SDK"
-in their forums, but the u-boot sources included result in 2GB RAM being
-detected. The following FIPs were generated with newer private sources
-and give correct (4GB) RAM detection:
-
-https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh beelink-s922x /path/to/u-boot/u-boot.bin my-output-dir
-NB: Beelink use a common board config for GT-King, GT-King Pro and the
-GS-King-X model, hence the "beelink-s922x" name.
+U-Boot Manual Signing
+---------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `beelink-s922x`
+Beelink released an Amlogic "SDK" dump in their forums, but the U-Boot sources included
+result in 2GB RAM detected. The following FIPs were generated with newer sources and
+detect 4GB RAM: https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
.. code-block:: bash
@@ -61,57 +61,57 @@ Go back to the mainline U-Boot source tree then:
$ cp u-boot.bin fip/bl33.bin
$ sh fip/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ sh fip/blx_fix.sh \
- fip/bl2.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/acs.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.g12a.enc \
- --level v3
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
$ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ fip/aml_encrypt_g12b --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc \
- --ddrfw1 fip/ddr4_1d.fw \
- --ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
- --ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
- --ddrfw8 fip/aml_ddr.fw \
- --level v3
-
-and then write the image to SD with:
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 05/33] doc: boards: amlogic: update documentation for Beelink GT-King Pro
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (3 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 04/33] doc: boards: amlogic: update documentation for Beelink GT-King Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 06/33] doc: boards: amlogic: update documentation for JetHub J100 Christian Hewitt
` (28 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/beelink-gtkingpro.rst | 120 ++++++++++++------------
1 file changed, 60 insertions(+), 60 deletions(-)
diff --git a/doc/board/amlogic/beelink-gtkingpro.rst b/doc/board/amlogic/beelink-gtkingpro.rst
index 07bb04bb36..541938b103 100644
--- a/doc/board/amlogic/beelink-gtkingpro.rst
+++ b/doc/board/amlogic/beelink-gtkingpro.rst
@@ -1,10 +1,10 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Beelink GT-King Pro
-==============================
+U-Boot for Beelink GT-King Pro (S922X)
+======================================
-The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference
-board with an S922X-H chip.
+The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference board with
+an S922X-H chip and the following specifications:
- 4GB LPDDR4 RAM
- 64GB eMMC storage
@@ -19,10 +19,10 @@ board with an S922X-H chip.
- 1x SD card slot
- 1x Power on/off button
-Beelink do not provide public schematics, but have been willing
-to share them with known distro developers on request.
+Beelink do not provide public schematics, but have been willing to share them with known
+distro developers to assist with development.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -31,21 +31,21 @@ U-Boot compilation
$ make beelink-gtkingpro_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-Amlogic does not provide sources for the firmware and for tools needed
-to create the bootloader image. Beelink have provided the Amlogic "SDK"
-in their forums, but the u-boot sources included result in 2GB RAM being
-detected. The following FIPs were generated with newer private sources
-and give correct (4GB) RAM detection:
-
-https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh beelink-s922x /path/to/u-boot/u-boot.bin my-output-dir
-NB: Beelink use a common board config for GT-King, GT-King Pro and the
-GS-King-X model, hence the "beelink-s922x" name.
+U-Boot Manual Signing
+---------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `beelink-s922x`
+Beelink released an Amlogic "SDK" dump in their forums, but the U-Boot sources included
+result in 2GB RAM detected. The following FIPs were generated with newer sources and
+detect 4GB RAM: https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
.. code-block:: bash
@@ -62,57 +62,57 @@ Go back to the mainline U-Boot source tree then:
$ cp u-boot.bin fip/bl33.bin
$ sh fip/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ sh fip/blx_fix.sh \
- fip/bl2.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/acs.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.g12a.enc \
- --level v3
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
$ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ fip/aml_encrypt_g12b --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc \
- --ddrfw1 fip/ddr4_1d.fw \
- --ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
- --ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
- --ddrfw8 fip/aml_ddr.fw \
- --level v3
-
-and then write the image to SD with:
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 06/33] doc: boards: amlogic: update documentation for JetHub J100
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (4 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 05/33] doc: boards: amlogic: update documentation for Beelink GT-King Pro Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 07/33] doc: boards: amlogic: update documentation for JetHub J80 Christian Hewitt
` (27 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/jethub-j100.rst | 66 ++++++++++++++++---------------
1 file changed, 35 insertions(+), 31 deletions(-)
diff --git a/doc/board/amlogic/jethub-j100.rst b/doc/board/amlogic/jethub-j100.rst
index dd1ed68b9c..0d63976789 100644
--- a/doc/board/amlogic/jethub-j100.rst
+++ b/doc/board/amlogic/jethub-j100.rst
@@ -1,11 +1,10 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for JetHub J100
-=======================
+U-Boot for JetHub J100 (A113X)
+==============================
-JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a series of home
-automation controller manufactured by JetHome with the following
-specifications:
+JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller device
+manufactured by JetHome with the following specifications:
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
@@ -22,16 +21,15 @@ specifications:
- DC source with a voltage of 9 to 56 V / Passive POE
- DIN Rail Mounting case
-Basic version also has:
+The basic version also has:
- - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output
- power and Zigbee 3.0 support.
+ - TI CC2538 + CC2592 Zigbee Wireless with upto 20dBm output power and Zigbee 3.0
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -40,14 +38,20 @@ U-Boot compilation
$ make jethub_j100_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `jethub-j100`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh jethub-j100 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain binaries
-from the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -55,7 +59,7 @@ from the git tree published by the board vendor:
$ cd jethub-u-boot
$ export FIPDIR=$PWD
-Go back to mainline U-boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -90,27 +94,27 @@ Go back to mainline U-boot source tree then :
bl2
$ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
$ $FIPDIR/j100/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ $FIPDIR/j100/aml_encrypt_axg --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc --level v3
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc --level v3
-and then write the image to eMMC with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_emmc_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 07/33] doc: boards: amlogic: update documentation for JetHub J80
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (5 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 06/33] doc: boards: amlogic: update documentation for JetHub J100 Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 08/33] doc: boards: amlogic: update documentation for Khadas VIM Christian Hewitt
` (26 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/jethub-j80.rst | 46 ++++++++++++++++++--------------
1 file changed, 26 insertions(+), 20 deletions(-)
diff --git a/doc/board/amlogic/jethub-j80.rst b/doc/board/amlogic/jethub-j80.rst
index f669a0118d..d20fbad4c5 100644
--- a/doc/board/amlogic/jethub-j80.rst
+++ b/doc/board/amlogic/jethub-j80.rst
@@ -1,10 +1,10 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for JetHub J80
-======================
+U-Boot for JetHub J80 (S905W)
+=============================
-JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation
-controller manufactured by JetHome with the following specifications:
+JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller device
+manufactured by JetHome with the following specifications:
- Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
- No video out
@@ -21,7 +21,7 @@ controller manufactured by JetHome with the following specifications:
- DC source 5V microUSB
- Square plastic case
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -30,14 +30,20 @@ U-Boot compilation
$ make jethub_j80_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `jethub-j80`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh jethub-j80 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain binaries
-from the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -45,7 +51,7 @@ from the git tree published by the board vendor:
$ cd jethub-u-boot
$ export FIPDIR=$PWD
-Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -84,16 +90,16 @@ Go back to mainline U-Boot source tree then :
$ $FIPDIR/j80/aml_encrypt_gxl --bl3enc --input fip/bl33.bin --compress lz4
$ $FIPDIR/j80/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
$ $FIPDIR/j80/aml_encrypt_gxl --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc
-and then write the image to SD/eMMC with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 08/33] doc: boards: amlogic: update documentation for Khadas VIM
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (6 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 07/33] doc: boards: amlogic: update documentation for JetHub J80 Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 09/33] doc: boards: amlogic: update documentation for Khadas VIM2 Christian Hewitt
` (25 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/khadas-vim.rst | 76 +++++++++++++++++---------------
1 file changed, 41 insertions(+), 35 deletions(-)
diff --git a/doc/board/amlogic/khadas-vim.rst b/doc/board/amlogic/khadas-vim.rst
index 04025d737c..f1fbe1a8a6 100644
--- a/doc/board/amlogic/khadas-vim.rst
+++ b/doc/board/amlogic/khadas-vim.rst
@@ -1,24 +1,24 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Khadas VIM
-======================
+U-Boot for Khadas VIM (S905X)
+=============================
-Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion
-Technology Co., Ltd with the following specifications:
+Khadas VIM is a Single Board Computer manufactured by Shenzhen Wesion Technology Co. Ltd
+with the following specifications:
- Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
- ARM Mali 450 GPU
- 2GB DDR3 SDRAM
+ - 8GB/16GB eMMC
- 10/100 Ethernet
- HDMI 2.0 4K/60Hz display
- 40-pin GPIO header
- 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG
- - 8GB/16GBeMMC
- microSD
- SDIO Wifi Module, Bluetooth
- - Two channels IR receiver
+ - Two channel IR receiver
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -27,14 +27,20 @@ U-Boot compilation
$ make khadas-vim_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `khadas-vim`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh khadas-vim /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -64,40 +70,40 @@ Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ $FIPDIR/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
$ $FIPDIR/blx_fix.sh \
- fip/bl2_acs.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/bl21.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
$ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 09/33] doc: boards: amlogic: update documentation for Khadas VIM2
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (7 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 08/33] doc: boards: amlogic: update documentation for Khadas VIM Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 10/33] doc: boards: amlogic: update documentation for Khadas VIM3 Christian Hewitt
` (24 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/khadas-vim2.rst | 76 +++++++++++++++++--------------
1 file changed, 41 insertions(+), 35 deletions(-)
diff --git a/doc/board/amlogic/khadas-vim2.rst b/doc/board/amlogic/khadas-vim2.rst
index 7ac3bdcbaf..78d47f93fe 100644
--- a/doc/board/amlogic/khadas-vim2.rst
+++ b/doc/board/amlogic/khadas-vim2.rst
@@ -1,25 +1,25 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Khadas VIM2
-=======================
+U-Boot for Khadas VIM2 (S912)
+=============================
-Khadas VIM2 is an Open Source DIY Box manufactured by Shenzhen Wesion
-Technology Co., Ltd with the following specifications:
+Khadas VIM2 is a Single Board Computer manufactured by Shenzhen Wesion Technology Co. Ltd
+with the following specifications:
- Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz
- ARM Mali T860 GPU
- - 2/3GB DDR4 SDRAM
+ - 2GB/3GB DDR4 SDRAM
+ - 16GB/32GB/64GB eMMC
- 10/100/1000 Ethernet
- HDMI 2.0 4K/60Hz display
- 40-pin GPIO header
- 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG
- - 16GB/32GB/64GB eMMC
- 2MB SPI Flash
- microSD
- SDIO Wifi Module, Bluetooth
- Two channels IR receiver
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -28,14 +28,20 @@ U-Boot compilation
$ make khadas-vim2_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh khadas-vim2 /path/to/u-boot/u-boot.bin my-output-dir
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `khadas-vim2`
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -50,7 +56,7 @@ the git tree published by the board vendor:
$ make
$ export FIPDIR=$PWD/fip
-Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -65,40 +71,40 @@ Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ $FIPDIR/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
$ $FIPDIR/blx_fix.sh \
- fip/bl2_acs.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/bl21.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
$ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
$ DEV=/dev/your_sd_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 10/33] doc: boards: amlogic: update documentation for Khadas VIM3
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (8 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 09/33] doc: boards: amlogic: update documentation for Khadas VIM2 Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 11/33] doc: boards: amlogic: update documentation for Khadas VIM3L Christian Hewitt
` (23 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/khadas-vim3.rst | 137 +++++++++++++++---------------
1 file changed, 68 insertions(+), 69 deletions(-)
diff --git a/doc/board/amlogic/khadas-vim3.rst b/doc/board/amlogic/khadas-vim3.rst
index 73dc32b79b..88f2e0ebbe 100644
--- a/doc/board/amlogic/khadas-vim3.rst
+++ b/doc/board/amlogic/khadas-vim3.rst
@@ -1,10 +1,10 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Khadas VIM3
-======================
+U-Boot for Khadas VIM3 (A311D)
+==============================
-Khadas VIM3 is a single board computer manufactured by Shenzhen Wesion
-Technology Co., Ltd. with the following specifications:
+Khadas VIM3 is a Single Board Computer manufactured by Shenzhen Wesion Technology Co. Ltd
+with the following specifications:
- Amlogic A311D Arm Cortex-A53 dual-core + Cortex-A73 quad-core SoC
- 4GB LPDDR4 SDRAM
@@ -20,32 +20,27 @@ Schematics are available on the manufacturer website.
PCIe Setup
----------
-The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
-lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
-an USB3.0 Type A connector and a M.2 Key M slot.
-The PHY driving these differential lines is shared between
-the USB3.0 controller and the PCIe Controller, thus only
-a single controller can use it.
-To setup for PCIe, run the following commands from U-Boot:
+The on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB
+3.1 SuperSpeed Data Switch between a USB3.0 Type-A connector and an M.2 Key M slot. The
+PHY driving these differential lines is shared between the USB3.0 controller and the PCIe
+Controller, thus only a single controller can use it.
+
+To setup for PCIe run the following commands from U-Boot then power-cycle the board:
.. code-block:: none
i2c dev i2c@5000
i2c mw 0x18 0x33 1
-Then power-cycle the board.
-
-To set back to USB3.0, run the following commands from U-Boot:
+To revert to USB3.0 run the following commands from U-Boot then power-cycle the board:
.. code-block:: none
i2c dev i2c@5000
i2c mw 0x18 0x33 0
-Then power-cycle the board.
-
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -54,14 +49,20 @@ U-Boot compilation
$ make khadas-vim3_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh khadas-vim3 /path/to/u-boot/u-boot.bin my-output-dir
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `khadas-vim3`
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -72,16 +73,14 @@ the git tree published by the board vendor:
$ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
$ DIR=vim3-u-boot
- $ git clone --depth 1 \
- https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \
- $DIR
+ $ git clone --depth 1 https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 $DIR
$ cd vim3-u-boot
$ make kvim3_defconfig
$ make CROSS_COMPILE=aarch64-none-elf-
$ export UBOOTDIR=$PWD
-Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -105,58 +104,58 @@ Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ bash fip/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ bash fip/blx_fix.sh \
- fip/bl2.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/acs.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.g12a.enc \
- --level v3
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33 --compress lz4
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33 --compress lz4
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc \
- --ddrfw1 fip/ddr4_1d.fw \
- --ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
- --ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
- --ddrfw8 fip/aml_ddr.fw \
- --ddrfw9 fip/lpddr3_1d.fw \
- --level v3
-
-and then write the image to SD with:
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --ddrfw9 fip/lpddr3_1d.fw \
+ --level v3
+
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 11/33] doc: boards: amlogic: update documentation for Khadas VIM3L
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (9 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 10/33] doc: boards: amlogic: update documentation for Khadas VIM3 Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 12/33] doc: boards: amlogic: update documentation for LaFrite Christian Hewitt
` (22 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/khadas-vim3l.rst | 137 ++++++++++++++---------------
1 file changed, 68 insertions(+), 69 deletions(-)
diff --git a/doc/board/amlogic/khadas-vim3l.rst b/doc/board/amlogic/khadas-vim3l.rst
index 692ab3d21d..935f43c725 100644
--- a/doc/board/amlogic/khadas-vim3l.rst
+++ b/doc/board/amlogic/khadas-vim3l.rst
@@ -1,10 +1,10 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Khadas VIM3L
-=======================
+U-Boot for Khadas VIM3L (S905D3)
+================================
-Khadas VIM3L is a single board computer manufactured by Shenzhen Wesion
-Technology Co., Ltd. with the following specifications:
+Khadas VIM3L is a Single Board Computer manufactured by Shenzhen Wesion Technology Co. Ltd
+with the following specifications:
- Amlogic S905D3 Arm Cortex-A55 quad-core SoC
- 2GB LPDDR4 SDRAM
@@ -20,32 +20,27 @@ Schematics are available on the manufacturer website.
PCIe Setup
----------
-The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
-lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
-an USB3.0 Type A connector and a M.2 Key M slot.
-The PHY driving these differential lines is shared between
-the USB3.0 controller and the PCIe Controller, thus only
-a single controller can use it.
-To setup for PCIe, run the following commands from U-Boot:
+The on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB
+3.1 SuperSpeed Data Switch between a USB3.0 Type-A connector and an M.2 Key-M slot. The
+PHY driving these differential lines is shared between the USB3.0 controller and the PCIe
+Controller, thus only a single controller can use it.
+
+To setup for PCIe run the following commands from U-Boot then power-cycle the board:
.. code-block:: none
i2c dev i2c@5000
i2c mw 0x18 0x33 1
-Then power-cycle the board.
-
-To set back to USB3.0, run the following commands from U-Boot:
+To revert to USB3.0 run the following commands from U-Boot then power-cycle the board:
.. code-block:: none
i2c dev i2c@5000
i2c mw 0x18 0x33 0
-Then power-cycle the board.
-
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -54,14 +49,20 @@ U-Boot compilation
$ make khadas-vim3l_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh khadas-vim3l /path/to/u-boot/u-boot.bin my-output-dir
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `khadas-vim3l`
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -72,16 +73,14 @@ the git tree published by the board vendor:
$ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
$ DIR=vim3l-u-boot
- $ git clone --depth 1 \
- https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \
- $DIR
+ $ git clone --depth 1 https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 $DIR
$ cd vim3l-u-boot
$ make kvim3l_defconfig
$ make CROSS_COMPILE=aarch64-none-elf-
$ export UBOOTDIR=$PWD
-Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -105,58 +104,58 @@ Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ bash fip/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ bash fip/blx_fix.sh \
- fip/bl2.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/acs.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.g12a.enc \
- --level v3
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33 --compress lz4
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33 --compress lz4
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc \
- --ddrfw1 fip/ddr4_1d.fw \
- --ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
- --ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
- --ddrfw8 fip/aml_ddr.fw \
- --ddrfw9 fip/lpddr3_1d.fw \
- --level v3
-
-and then write the image to SD with:
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --ddrfw9 fip/lpddr3_1d.fw \
+ --level v3
+
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 12/33] doc: boards: amlogic: update documentation for LaFrite
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (10 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 11/33] doc: boards: amlogic: update documentation for Khadas VIM3L Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 13/33] doc: boards: amlogic: update documentation for LePotato Christian Hewitt
` (21 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/libretech-ac.rst | 77 ++++++++++++++++--------------
1 file changed, 42 insertions(+), 35 deletions(-)
diff --git a/doc/board/amlogic/libretech-ac.rst b/doc/board/amlogic/libretech-ac.rst
index 7a915f9f26..6ebb7f646d 100644
--- a/doc/board/amlogic/libretech-ac.rst
+++ b/doc/board/amlogic/libretech-ac.rst
@@ -1,9 +1,9 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for LibreTech AC
-=======================
+U-Boot for LibreTech-AC 'LaFrite' (S805X)
+=========================================
-LibreTech AC is a single board computer manufactured by Libre Technology
+LibreTech-AC aka 'LaFrite' is a Single Board Computer manufactured by Libre Computer
with the following specifications:
- Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz
@@ -13,12 +13,13 @@ with the following specifications:
- HDMI 2.0 4K/60Hz display
- 40-pin GPIO header
- 4 x USB 2.0 Host
- - eMMC, SPI NOR Flash
+ - SPI NOR Flash
+ - Removable eMMC module
- Infrared receiver
Schematics are available on the manufacturer website.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -27,14 +28,20 @@ U-Boot compilation
$ make libretech-ac_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `lafrite`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh lafrite /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -50,7 +57,7 @@ the git tree published by the board vendor:
$ make
$ export UBOOTDIR=$PWD
-Download the latest Amlogic Buildroot package, and extract it :
+Download the latest Amlogic buildroot package and extract it:
.. code-block:: bash
@@ -58,7 +65,7 @@ Download the latest Amlogic Buildroot package, and extract it :
$ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader
$ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418
-Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -73,40 +80,40 @@ Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ sh $UBOOTDIR/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
$ sh $UBOOTDIR/blx_fix.sh \
- fip/bl2_acs.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/bl21.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
$ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
$ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
$ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
$ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc
-and then write the image to SD with:
+Then write U-Boot to USB or SPI-NOR with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 13/33] doc: boards: amlogic: update documentation for LePotato
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (11 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 12/33] doc: boards: amlogic: update documentation for LaFrite Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 14/33] doc: boards: amlogic: update documentation for NanoPi-K2 Christian Hewitt
` (20 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/libretech-cc.rst | 109 +++++++++++------------------
1 file changed, 40 insertions(+), 69 deletions(-)
diff --git a/doc/board/amlogic/libretech-cc.rst b/doc/board/amlogic/libretech-cc.rst
index 596ce45dc4..d1d3ce49f6 100644
--- a/doc/board/amlogic/libretech-cc.rst
+++ b/doc/board/amlogic/libretech-cc.rst
@@ -1,12 +1,12 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for LibreTech CCs
-========================
+U-Boot for LibreTech CC 'LePotato' (S905X)
+==========================================
-LibreTech CC is a single board computer manufactured by Libre Technology
-with the following specifications:
+LibreTech CC is a Single Board Computer manufactured by Libre Computer Technology with
+the following specifications:
-V1:
+v1:
- Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
- ARM Mali 450 GPU
@@ -19,14 +19,14 @@ V1:
- Infrared receiver
- Jack for CVBS and Audio
-V2:
+v2:
- Added SPI NOR
- Removed Jack
Schematics are available on the manufacturer website.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -37,36 +37,20 @@ U-Boot compilation
Use libretech-cc_v2_defconfig for v2.
-Image creation
---------------
-
-To boot the system, u-boot must be combined with several earlier stage
-bootloaders:
-
-* bl2.bin: vendor-provided binary blob
-* bl21.bin: built from vendor u-boot source
-* bl30.bin: vendor-provided binary blob
-* bl301.bin: built from vendor u-boot source
-* bl31.bin: vendor-provided binary blob
-* acs.bin: built from vendor u-boot source
-
-These binaries and the tools required below have been collected and prebuilt
-for convenience at <https://github.com/BayLibre/u-boot/releases/>. These
-apply to both v1 and v2.
-
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `lepotato`
-
-Download and extract the libretech-cc release from there, and set FIPDIR to
-point to the `fip` subdirectory.
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh lepotato /path/to/u-boot/u-boot.bin my-output-dir
- $ export FIPDIR=/path/to/extracted/fip
+U-Boot Manual Signing
+---------------------
-Alternatively, you can obtain the original vendor u-boot tree which
-contains the required blobs and sources, and build yourself.
-Note that old compilers are required for this to build. The compilers here
-are suggested by Amlogic, and they are 32-bit x86 binaries.
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -81,9 +65,7 @@ are suggested by Amlogic, and they are 32-bit x86 binaries.
$ make
$ export FIPDIR=$PWD/fip
-Once you have the binaries available (either through the prebuilt download,
-or having built the vendor u-boot yourself), you can then proceed to glue
-everything together. Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -98,51 +80,40 @@ everything together. Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ $FIPDIR/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
$ $FIPDIR/blx_fix.sh \
- fip/bl2_acs.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/bl21.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
$ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
-
-Note that Amlogic provides aml_encrypt_gxl as a 32-bit x86 binary with no
-source code. Should you prefer to avoid that, there are open source reverse
-engineered versions available:
-
-1. gxlimg <https://github.com/repk/gxlimg>, which comes with a handy
- Makefile that automates the whole process.
-2. meson-tools <https://github.com/afaerber/meson-tools>
-
-However, these community-developed alternatives are not endorsed by or
-supported by Amlogic.
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 14/33] doc: boards: amlogic: update documentation for NanoPi-K2
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (12 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 13/33] doc: boards: amlogic: update documentation for LePotato Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 15/33] doc: boards: amlogic: update documentation for ODROID-C2 Christian Hewitt
` (19 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation. Notably we can now support U-Boot install to
the removable eMMC storage module in addition to SD cards.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/nanopi-k2.rst | 93 +++++++++++++++++++--------------
1 file changed, 54 insertions(+), 39 deletions(-)
diff --git a/doc/board/amlogic/nanopi-k2.rst b/doc/board/amlogic/nanopi-k2.rst
index 76ff874434..2316dae0ec 100644
--- a/doc/board/amlogic/nanopi-k2.rst
+++ b/doc/board/amlogic/nanopi-k2.rst
@@ -1,10 +1,10 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for NanoPi-K2
-====================
+U-Boot for NanoPi-K2 (S905)
+===========================
-NanoPi-K2 is a single board computer manufactured by FriendlyElec
-with the following specifications:
+NanoPi-K2 is a single board computer manufactured by FriendlyElec with the following
+specifications:
- Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz
- ARM Mali 450 GPU
@@ -18,7 +18,7 @@ with the following specifications:
Schematics are available on the manufacturer website.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -27,14 +27,20 @@ U-Boot compilation
$ make nanopi-k2_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `nanopi-k2`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh nanopi-k2 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -43,7 +49,6 @@ the git tree published by the board vendor:
$ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
$ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
$ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
- $ git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot
$ git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot
$ cd amlogic-u-boot
$ sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile
@@ -52,7 +57,7 @@ the git tree published by the board vendor:
$ make
$ export FIPDIR=$PWD/fip
-Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -65,42 +70,52 @@ Go back to mainline U-Boot source tree then :
$ cp $FIPDIR/gxb/bl301.bin fip/
$ cp $FIPDIR/gxb/bl31.img fip/
$ cp u-boot.bin fip/bl33.bin
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/bl1.bin.hardkernel fip/bl1.bin.hardkernel
+ $ chmod +x fip/bl1.bin.hardkernel
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/aml_chksum fip/aml_chksum
+ $ chmod +x fip/aml_chksum
$ $FIPDIR/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
-
- $ $FIPDIR/fip_create \
- --bl30 fip/bl30_new.bin \
- --bl31 fip/bl31.img \
- --bl33 fip/bl33.bin \
- fip/fip.bin
-
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ $FIPDIR/fip_create --bl30 fip/bl30_new.bin \
+ --bl31 fip/bl31.img \
+ --bl33 fip/bl33.bin \
+ fip/fip.bin
+
+ $ sed -i 's/\x73\x02\x08\x91/\x1F\x20\x03\xD5/' fip/bl2.bin
$ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
$ $FIPDIR/blx_fix.sh \
- fip/bl2_acs.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/bl21.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin
$ $FIPDIR/gxb/aml_encrypt_gxb --bootsig \
- --input fip/boot_new.bin
- --output fip/u-boot.bin
+ --input fip/boot_new.bin
+ --output fip/u-boot.bin
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
- $ dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 conv=fsync
+ $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 seek=9 skip=8 count=87 conv=fsync,notrunc
+ $ dd if=/dev/zero of=fip/u-boot.bin.gxbb bs=512 seek=8 count=1 conv=fsync,notrunc
+ $ dd if=bl1.bin.hardkernel of=fip/u-boot.bin.gxbb bs=512 seek=2 skip=2 count=1 conv=fsync,notrunc
+ $ ./aml_chksum fip/u-boot.bin.gxbb
+ $ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 15/33] doc: boards: amlogic: update documentation for ODROID-C2
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (13 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 14/33] doc: boards: amlogic: update documentation for NanoPi-K2 Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 16/33] doc: boards: amlogic: update documentation for ODROID-C4 Christian Hewitt
` (18 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/odroid-c2.rst | 54 ++++++++++++++++++---------------
1 file changed, 30 insertions(+), 24 deletions(-)
diff --git a/doc/board/amlogic/odroid-c2.rst b/doc/board/amlogic/odroid-c2.rst
index 8a1be4bf55..82eea3820e 100644
--- a/doc/board/amlogic/odroid-c2.rst
+++ b/doc/board/amlogic/odroid-c2.rst
@@ -1,12 +1,12 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for ODROID-C2
-====================
+U-Boot for ODROID-C2 (S905)
+===========================
-ODROID-C2 is a single board computer manufactured by Hardkernel
-Co. Ltd with the following specifications:
+ODROID-C2 is a single board computer manufactured by Hardkernel with the following
+specifications:
- - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz
+ - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz
- ARM Mali 450 GPU
- 2GB DDR3 SDRAM
- Gigabit Ethernet
@@ -16,9 +16,9 @@ Co. Ltd with the following specifications:
- eMMC, microSD
- Infrared receiver
-Schematics are available on the manufacturer website.
+Schematics are available on the manufacturer website: https://wiki.odroid.com
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -27,38 +27,44 @@ U-Boot compilation
$ make odroid-c2_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `odroid-c2`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh odroid-c2 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
$ DIR=odroid-c2
- $ git clone --depth 1 \
- https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \
- $DIR
+ $ git clone --depth 1 https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 $DIR
+
$ $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \
- --bl301 $DIR/fip/gxb/bl301.bin \
- --bl31 $DIR/fip/gxb/bl31.bin \
- --bl33 u-boot.bin \
- $DIR/fip.bin
+ --bl301 $DIR/fip/gxb/bl301.bin \
+ --bl31 $DIR/fip/gxb/bl31.bin \
+ --bl33 u-boot.bin \
+ $DIR/fip.bin
+
$ $DIR/fip/fip_create --dump $DIR/fip.bin
$ cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin
$ $DIR/fip/gxb/aml_encrypt_gxb --bootsig \
- --input $DIR/boot_new.bin \
- --output $DIR/u-boot.img
+ --input $DIR/boot_new.bin \
+ --output $DIR/u-boot.img
$ dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/your_boot_device
$ BL1=$DIR/sd_fuse/bl1.bin.hardkernel
$ dd if=$BL1 of=$DEV conv=fsync bs=1 count=442
$ dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 16/33] doc: boards: amlogic: update documentation for ODROID-C4
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (14 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 15/33] doc: boards: amlogic: update documentation for ODROID-C2 Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 17/33] doc: boards: amlogic: update documentation for ODROID GO ULTRA Christian Hewitt
` (17 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation. Notably drop references to the ODROID-HC4 board
as its support has evolved and we will add an HC4 specific document in
a later patch.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/odroid-c4.rst | 117 ++++++++++++++++----------------
1 file changed, 60 insertions(+), 57 deletions(-)
diff --git a/doc/board/amlogic/odroid-c4.rst b/doc/board/amlogic/odroid-c4.rst
index b512c6a3d8..89198cda91 100644
--- a/doc/board/amlogic/odroid-c4.rst
+++ b/doc/board/amlogic/odroid-c4.rst
@@ -1,10 +1,10 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for ODROID-C4
-====================
+U-Boot for ODROID-C4 (S905X3)
+=============================
-ODROID-C4 is a single board computer manufactured by Hardkernel
-Co. Ltd with the following specifications:
+ODROID-C4 is a Single Board Computer manufactured by Hardkernel with the following
+specifications:
- Amlogic S905X3 Arm Cortex-A55 quad-core SoC
- 4GB DDR4 SDRAM
@@ -17,12 +17,9 @@ Co. Ltd with the following specifications:
- UART serial
- Infrared receiver
-The ODROID-HC4 is a variant with a PCIe-SATA controller, the same commands
-applies for HC4.
-
Schematics are available on the manufacturer website.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -31,14 +28,20 @@ U-Boot compilation
$ make odroid-c4_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh odroid-c4 /path/to/u-boot/u-boot.bin my-output-dir
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `odroid-c4` or `odroid-hc4`
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -58,7 +61,7 @@ the git tree published by the board vendor:
$ make
$ export UBOOTDIR=$PWD
-Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -82,58 +85,58 @@ Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ sh fip/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ sh fip/blx_fix.sh \
- fip/bl2.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/acs.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.g12a.enc \
- --level v3
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33 --compress lz4
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33 --compress lz4
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc \
- --ddrfw1 fip/ddr4_1d.fw \
- --ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
- --ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
- --ddrfw8 fip/aml_ddr.fw \
- --ddrfw9 fip/lpddr3_1d.fw \
- --level v3
-
-and then write the image to SD with:
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --ddrfw9 fip/lpddr3_1d.fw \
+ --level v3
+
+Then write the image to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 17/33] doc: boards: amlogic: update documentation for ODROID GO ULTRA
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (15 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 16/33] doc: boards: amlogic: update documentation for ODROID-C4 Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 18/33] doc: boards: amlogic: update documentation for ODROID-N2/N2+ Christian Hewitt
` (16 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/odroid-go-ultra.rst | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
diff --git a/doc/board/amlogic/odroid-go-ultra.rst b/doc/board/amlogic/odroid-go-ultra.rst
index 8df9e0cb79..50d91394d4 100644
--- a/doc/board/amlogic/odroid-go-ultra.rst
+++ b/doc/board/amlogic/odroid-go-ultra.rst
@@ -1,10 +1,9 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for ODROID-GO-ULTRA
+U-Boot for ODROID-GO-ULTRA (S922X)
==========================
-The Odroid Go Ultra is a portable gaming device with the following
-characteristics:
+The ODROID GO ULTRA is a portable gaming device with the following characteristics:
- Amlogic S922X SoC
- RK817 & RK818 PMICs
@@ -19,7 +18,7 @@ characteristics:
- 2x ADC Analog Joysticks
- USB-C Port for USB2 Device and Charging
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -28,7 +27,19 @@ U-Boot compilation
$ make odroid-go-ultra_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-Pleaser refer to :doc:`pre-generated-fip` with codename `odroid-go-ultra`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh odroid-go-ultra /path/to/u-boot/u-boot.bin my-output-dir
+
+Then write the image to SD or eMMC with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 18/33] doc: boards: amlogic: update documentation for ODROID-N2/N2+
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (16 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 17/33] doc: boards: amlogic: update documentation for ODROID GO ULTRA Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 19/33] doc: boards: amlogic: update documentation for ODROID-N2L Christian Hewitt
` (15 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation. Notably mention the ODROID-N2+ and the option
to use FDTDIR not FDT for automatic device-tree selection.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/odroid-n2.rst | 122 +++++++++++++++++---------------
1 file changed, 65 insertions(+), 57 deletions(-)
diff --git a/doc/board/amlogic/odroid-n2.rst b/doc/board/amlogic/odroid-n2.rst
index 7aad36e003..8ca1f89699 100644
--- a/doc/board/amlogic/odroid-n2.rst
+++ b/doc/board/amlogic/odroid-n2.rst
@@ -1,10 +1,10 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for ODROID-N2
-====================
+U-Boot for ODROID-N2/N2+ (S922X)
+================================
-ODROID-N2 is a single board computer manufactured by Hardkernel
-Co. Ltd with the following specifications:
+ODROID-N2 and ODROID-N2+ are a Single Board Computers manufactured by Hardkernel with the
+following specifications:
- Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
- 4GB DDR4 SDRAM
@@ -15,9 +15,13 @@ Co. Ltd with the following specifications:
- eMMC, microSD
- Infrared receiver
-Schematics are available on the manufacturer website.
+ODROID-N2+ uses Rev-C silicon allowing higher CPU opp-points. U-Boot contains logic to
+read the model detail from SARADC and select the correct device-tree file if FDTDIR is
+used instead of an FDT reference to a specfic device-tree.
-U-Boot compilation
+Schematics are available on the manufacturer website: https://wiki.odroid.com
+
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -26,14 +30,20 @@ U-Boot compilation
$ make odroid-n2_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh odroid-n2 /path/to/u-boot/u-boot.bin my-output-dir
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `odroid-n2` or `odroid-n2-plus`
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -44,16 +54,14 @@ the git tree published by the board vendor:
$ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
$ DIR=odroid-n2
- $ git clone --depth 1 \
- https://github.com/hardkernel/u-boot.git -b odroidn2-v2015.01 \
- $DIR
+ $ git clone --depth 1 https://github.com/hardkernel/u-boot.git -b odroidn2-v2015.01 $DIR
$ cd odroid-n2
$ make odroidn2_defconfig
$ make
$ export UBOOTDIR=$PWD
- Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -76,57 +84,57 @@ the git tree published by the board vendor:
$ cp u-boot.bin fip/bl33.bin
$ sh fip/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ sh fip/blx_fix.sh \
- fip/bl2.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/acs.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.g12a.enc \
- --level v3
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33 --compress lz4
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33 --compress lz4
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc \
- --ddrfw1 fip/ddr4_1d.fw \
- --ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
- --ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
- --ddrfw8 fip/aml_ddr.fw \
- --level v3
-
-and then write the image to SD with:
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 19/33] doc: boards: amlogic: update documentation for ODROID-N2L
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (17 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 18/33] doc: boards: amlogic: update documentation for ODROID-N2/N2+ Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 20/33] doc: boards: amlogic: update documentation for P200 Christian Hewitt
` (14 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/odroid-n2l.rst | 33 ++++++++++++++++++++++----------
1 file changed, 23 insertions(+), 10 deletions(-)
diff --git a/doc/board/amlogic/odroid-n2l.rst b/doc/board/amlogic/odroid-n2l.rst
index afd4409d1b..b264ace7f5 100644
--- a/doc/board/amlogic/odroid-n2l.rst
+++ b/doc/board/amlogic/odroid-n2l.rst
@@ -1,22 +1,23 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for ODROID-N2L
-=====================
+U-Boot for ODROID-N2L (S922X)
+=============================
-ODROID-N2L is a single board computer manufactured by Hardkernel
-Co. Ltd with the following specifications:
+ODROID-N2L is a Single Board Computer manufactured by Hardkernel with the following
+specifications:
- Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
- 4GB DDR4 SDRAM
- HDMI 2.1 4K/60Hz display
- 40-pin GPIO header
- - 1 x USB 3.0 Host, 1 x USB USB 2.0 Host
+ - 1x USB 3.0 Host
+ - 1x USB 2.0 Host
- eMMC, microSD
- MIPI DSI Port
-Schematics are available on the manufacturer website.
+Schematics are available on the manufacturer website: https://wiki.odroid.com
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -25,7 +26,19 @@ U-Boot compilation
$ make odroid-n2l_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `odroid-n2l`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh odroid-n2l /path/to/u-boot/u-boot.bin my-output-dir
+
+Then write U-Boot to SD or eMMC with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 20/33] doc: boards: amlogic: update documentation for P200
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (18 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 19/33] doc: boards: amlogic: update documentation for ODROID-N2L Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 21/33] doc: boards: amlogic: update documentation for P201 Christian Hewitt
` (13 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation. Notably we can now support U-Boot install to
the internal eMMC storage in addition to SD cards.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/p200.rst | 87 +++++++++++++++++++++++---------------
1 file changed, 53 insertions(+), 34 deletions(-)
diff --git a/doc/board/amlogic/p200.rst b/doc/board/amlogic/p200.rst
index 5e7c6b0276..b5c6ad096e 100644
--- a/doc/board/amlogic/p200.rst
+++ b/doc/board/amlogic/p200.rst
@@ -1,25 +1,24 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Amlogic P200
-=======================
+U-Boot for Amlogic P200 (S905)
+==============================
-P200 is a reference board manufactured by Amlogic with the following
-specifications:
+P200 is a reference board manufactured by Amlogic with the following specification:
- Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz
- ARM Mali 450 GPU
- 2GB DDR3 SDRAM
- Gigabit Ethernet
- HDMI 2.0 4K/60Hz display
- - 2 x USB 2.0 Host
+ - 2x USB 2.0 Host
- eMMC, microSD
- Infrared receiver
- SDIO WiFi Module
- - CVBS+Stereo Audio Jack
+ - CVBS + Stereo Audio Jack
Schematics are available from Amlogic on demand.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -28,14 +27,20 @@ U-Boot compilation
$ make p200_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `p200`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh p200 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image but sources have been shared by Linux development contractor, Baylibre:
.. code-block:: bash
@@ -50,7 +55,7 @@ the git tree published by the board vendor:
$ make
$ export FIPDIR=$PWD/fip
-Go back to mainline U-boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -63,37 +68,51 @@ Go back to mainline U-boot source tree then :
$ cp $FIPDIR/gxb/bl301.bin fip/
$ cp $FIPDIR/gxb/bl31.img fip/
$ cp u-boot.bin fip/bl33.bin
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/bl1.bin.hardkernel fip/bl1.bin.hardkernel
+ $ chmod +x fip/bl1.bin.hardkernel
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/aml_chksum fip/aml_chksum
+ $ chmod +x fip/aml_chksum
$ $FIPDIR/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
$ $FIPDIR/blx_fix.sh \
- fip/bl2_acs.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/bl21.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
-
- $ $FIPDIR/fip_create --bl30 fip/bl30_new.bin --bl31 fip/bl31.img --bl33 fip/bl33.bin fip/fip.bin
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ $FIPDIR/fip_create --bl30 fip/bl30_new.bin \
+ --bl31 fip/bl31.img \
+ --bl33 fip/bl33.bin \
+ fip/fip.bin
$ cat fip/bl2_new.bin fip/fip.bin >fip/boot_new.bin
- $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig --input fip/boot_new.bin --output fip/u-boot.bin
+ $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig \
+ --input fip/boot_new.bin \
+ --output fip/u-boot.bin
and then write the image to SD with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 conv=fsync
+ $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 seek=9 skip=8 count=87 conv=fsync,notrunc
+ $ dd if=/dev/zero of=fip/u-boot.bin.gxbb bs=512 seek=8 count=1 conv=fsync,notrunc
+ $ dd if=bl1.bin.hardkernel of=fip/u-boot.bin.gxbb bs=512 seek=2 skip=2 count=1 conv=fsync,notrunc
+ $ ./aml_chksum fip/u-boot.bin.gxbb
+ $ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 21/33] doc: boards: amlogic: update documentation for P201
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (19 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 20/33] doc: boards: amlogic: update documentation for P200 Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 22/33] doc: boards: amlogic: update documentation for Q200 Christian Hewitt
` (12 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation. Notably we can now support U-Boot install to
the internal eMMC storage in addition to SD cards.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/p201.rst | 87 +++++++++++++++++++++++---------------
1 file changed, 53 insertions(+), 34 deletions(-)
diff --git a/doc/board/amlogic/p201.rst b/doc/board/amlogic/p201.rst
index 2cd236582a..b3dce4204e 100644
--- a/doc/board/amlogic/p201.rst
+++ b/doc/board/amlogic/p201.rst
@@ -1,25 +1,24 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Amlogic P201
-=======================
+U-Boot for Amlogic P201 (S905)
+==============================
-P201 is a reference board manufactured by Amlogic with the following
-specifications:
+P201 is a reference board manufactured by Amlogic with the following specifications:
- Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz
- ARM Mali 450 GPU
- 2GB DDR3 SDRAM
- 10/100 Ethernet
- HDMI 2.0 4K/60Hz display
- - 2 x USB 2.0 Host
+ - 2x USB 2.0 Host
- eMMC, microSD
- Infrared receiver
- SDIO WiFi Module
- - CVBS+Stereo Audio Jack
+ - CVBS + Stereo Audio Jack
Schematics are available from Amlogic on demand.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -28,14 +27,20 @@ U-Boot compilation
$ make p201_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `p201`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh p201 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image but sources have been shared by Linux development contractor, Baylibre:
.. code-block:: bash
@@ -63,37 +68,51 @@ Go back to mainline U-boot source tree then :
$ cp $FIPDIR/gxb/bl301.bin fip/
$ cp $FIPDIR/gxb/bl31.img fip/
$ cp u-boot.bin fip/bl33.bin
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/bl1.bin.hardkernel fip/bl1.bin.hardkernel
+ $ chmod +x fip/bl1.bin.hardkernel
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/aml_chksum fip/aml_chksum
+ $ chmod +x fip/aml_chksum
$ $FIPDIR/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
$ $FIPDIR/blx_fix.sh \
- fip/bl2_acs.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/bl21.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
-
- $ $FIPDIR/fip_create --bl30 fip/bl30_new.bin --bl31 fip/bl31.img --bl33 fip/bl33.bin fip/fip.bin
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ $FIPDIR/fip_create --bl30 fip/bl30_new.bin \
+ --bl31 fip/bl31.img \
+ --bl33 fip/bl33.bin \
+ fip/fip.bin
$ cat fip/bl2_new.bin fip/fip.bin >fip/boot_new.bin
- $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig --input fip/boot_new.bin --output fip/u-boot.bin
+ $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig \
+ --input fip/boot_new.bin \
+ --output fip/u-boot.bin
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 conv=fsync
+ $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 seek=9 skip=8 count=87 conv=fsync,notrunc
+ $ dd if=/dev/zero of=fip/u-boot.bin.gxbb bs=512 seek=8 count=1 conv=fsync,notrunc
+ $ dd if=bl1.bin.hardkernel of=fip/u-boot.bin.gxbb bs=512 seek=2 skip=2 count=1 conv=fsync,notrunc
+ $ ./aml_chksum fip/u-boot.bin.gxbb
+ $ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 22/33] doc: boards: amlogic: update documentation for Q200
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (20 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 21/33] doc: boards: amlogic: update documentation for P201 Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:45 ` [PATCH 23/33] doc: boards: amlogic: update documentation for Radxa Zero Christian Hewitt
` (11 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/q200.rst | 76 +++++++++++++++++++++-----------------
1 file changed, 42 insertions(+), 34 deletions(-)
diff --git a/doc/board/amlogic/q200.rst b/doc/board/amlogic/q200.rst
index 3ac4116be4..c304980579 100644
--- a/doc/board/amlogic/q200.rst
+++ b/doc/board/amlogic/q200.rst
@@ -1,24 +1,24 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Amlogic Q200
-=======================
+U-Boot for Amlogic Q200 (S912)
+==============================
-Q200 is a reference board manufactured by Amlogic with the following
-specifications:
+Q200 is a reference board manufactured by Amlogic with the following specifications:
- Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz
- ARM Mali T860 GPU
- 2/3GB DDR4 SDRAM
- 10/100/1000 Ethernet
- HDMI 2.0 4K/60Hz display
- - 2 x USB 2.0 Host, 1 x USB 2.0 Device
+ - 2x USB 2.0 Host
+ - 1x USB 2.0 Device
- 16GB/32GB/64GB eMMC
- 2MB SPI Flash
- microSD
- SDIO Wifi Module, Bluetooth
- IR receiver
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -27,12 +27,20 @@ U-Boot compilation
$ make khadas-vim2_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh q200 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
+
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image but sources have been shared by Linux development contractor, Baylibre:
.. code-block:: bash
@@ -47,7 +55,7 @@ the git tree published by the board vendor:
$ make
$ export FIPDIR=$PWD/fip
-Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -62,40 +70,40 @@ Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ $FIPDIR/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
$ $FIPDIR/blx_fix.sh \
- fip/bl2_acs.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/bl21.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
$ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 23/33] doc: boards: amlogic: update documentation for Radxa Zero
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (21 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 22/33] doc: boards: amlogic: update documentation for Q200 Christian Hewitt
@ 2023-03-20 11:45 ` Christian Hewitt
2023-03-20 11:46 ` [PATCH 24/33] doc: boards: amlogic: update documentation for S400 Christian Hewitt
` (10 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:45 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/radxa-zero.rst | 45 +++++++++++++++++---------------
1 file changed, 24 insertions(+), 21 deletions(-)
diff --git a/doc/board/amlogic/radxa-zero.rst b/doc/board/amlogic/radxa-zero.rst
index f5611f52ec..e8a8d87320 100644
--- a/doc/board/amlogic/radxa-zero.rst
+++ b/doc/board/amlogic/radxa-zero.rst
@@ -1,14 +1,13 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Radxa Zero
-=====================
+U-Boot for Radxa Zero (S905Y2)
+==============================
-Radxa Zero is a small form factor SBC based on the Amlogic S905Y2
-chipset that ships in a number of RAM/eMMC configurations:
+Radxa Zero is a small form factor SBC based on the Amlogic S905Y2 chipset that ships in
+a number of RAM/eMMC configurations:
-Boards with 512MB/1GB LPDDR4 RAM have no eMMC storage and BCM43436
-wireless (2.4GHz b/g/n) while 2GB/4GB boards have 8/16/32/64/128GB
-eMMC storage and BCM4345 wireless (2.4/5GHz a/b/g/n/ac).
+512MB/1GB LPDDR4 RAM boards have no eMMC and BCM43436 wireless (2.4GHz b/g/n) while the
+2GB/4GB boards have 8/16/32/64/128GB eMMC and BCM4345 wireless (2.4/5GHz a/b/g/n/ac).
- Amlogic S905Y2 quad-core Cortex-A53
- Mali G31-MP2 GPU
@@ -18,11 +17,9 @@ eMMC storage and BCM4345 wireless (2.4/5GHz a/b/g/n/ac).
- 1x micro SD Card slot
- 40 Pin GPIO header
-Schematics are available on the manufacturer website:
+Schematics are available on the manufacturer website: https://dl.radxa.com/zero/docs/hw
-https://dl.radxa.com/zero/docs/hw/RADAX_ZERO_V13_SCH_20210309.pdf
-
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -31,14 +28,20 @@ U-Boot compilation
$ make radxa-zero_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh radxa-zero /path/to/u-boot/u-boot.bin my-output-dir
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `radxa-zero`
+U-Boot Manual Signing
+---------------------
-Amlogic does not provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-git trees published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -61,16 +64,16 @@ git trees published by the board vendor:
$ cd ../fip/radxa-zero
$ make
-This will generate:
+This will generate the signed U-Boot binaries:
.. code-block:: bash
$ u-boot.bin u-boot.bin.sd.bin u-boot.bin.usb.bl2 u-boot.bin.usb.tpl
-Then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 24/33] doc: boards: amlogic: update documentation for S400
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (22 preceding siblings ...)
2023-03-20 11:45 ` [PATCH 23/33] doc: boards: amlogic: update documentation for Radxa Zero Christian Hewitt
@ 2023-03-20 11:46 ` Christian Hewitt
2023-03-20 11:46 ` [PATCH 25/33] doc: boards: amlogic: update documentation for SEI510 Christian Hewitt
` (9 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:46 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/s400.rst | 89 ++++++++++++++++++++------------------
1 file changed, 47 insertions(+), 42 deletions(-)
diff --git a/doc/board/amlogic/s400.rst b/doc/board/amlogic/s400.rst
index c92817b421..b00fe64e1b 100644
--- a/doc/board/amlogic/s400.rst
+++ b/doc/board/amlogic/s400.rst
@@ -1,15 +1,14 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Amlogic S400
-=======================
+U-Boot for Amlogic S400 (A113X)
+===============================
-S400 is a reference board manufactured by Amlogic with the following
-specifications:
+S400 is a reference board manufactured by Amlogic with the following specifications:
- - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz
+ - Amlogic A113X ARM Cortex-A53 quad-core SoC @ 1.2GHz
- 1GB DDR4 SDRAM
- 10/100 Ethernet
- - 2 x USB 2.0 Host
+ - 2x USB 2.0 Host
- eMMC
- Infrared receiver
- SDIO WiFi Module
@@ -19,7 +18,7 @@ specifications:
Schematics are available from Amlogic on demand.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -28,14 +27,20 @@ U-Boot compilation
$ make s400_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `s400`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh s400 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image but sources have been shared by Linux development contractor, Baylibre:
.. code-block:: bash
@@ -65,47 +70,47 @@ Go back to mainline U-boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ $FIPDIR/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
$ $FIPDIR/blx_fix.sh \
- fip/bl2_acs.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/bl21.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
$ $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ $FIPDIR/axg/aml_encrypt_axg --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc --level v3
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc --level v3
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 25/33] doc: boards: amlogic: update documentation for SEI510
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (23 preceding siblings ...)
2023-03-20 11:46 ` [PATCH 24/33] doc: boards: amlogic: update documentation for S400 Christian Hewitt
@ 2023-03-20 11:46 ` Christian Hewitt
2023-03-20 11:46 ` [PATCH 26/33] doc: boards: amlogic: update documentation for SEI610 Christian Hewitt
` (8 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:46 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/sei510.rst | 113 ++++++++++++++++++-----------------
1 file changed, 59 insertions(+), 54 deletions(-)
diff --git a/doc/board/amlogic/sei510.rst b/doc/board/amlogic/sei510.rst
index c55e778494..09b0f53e16 100644
--- a/doc/board/amlogic/sei510.rst
+++ b/doc/board/amlogic/sei510.rst
@@ -1,21 +1,20 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Amlogic SEI510
-=========================
+U-Boot for Amlogic SEI510 (S905X2)
+==================================
-SEI510 is a customer board manufactured by SEI Robotics with the following
-specifications:
+SEI510 is a customer board manufactured by SEI Robotics with the following specification:
- Amlogic S905X2 ARM Cortex-A53 quad-core SoC
- 2GB DDR4 SDRAM
- 10/100 Ethernet (Internal PHY)
- - 1 x USB 3.0 Host
+ - 1x USB 3.0 Host
- eMMC
- SDcard
- Infrared receiver
- SDIO WiFi Module
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -24,14 +23,20 @@ U-Boot compilation
$ make sei510_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `sei510`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh sei510 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -46,7 +51,7 @@ the git tree published by the board vendor:
$ make
$ export UBOOTDIR=$PWD
-Download the latest Amlogic Buildroot package, and extract it :
+Download the latest Amlogic Buildroot package and extract it:
.. code-block:: bash
@@ -55,7 +60,7 @@ Download the latest Amlogic Buildroot package, and extract it :
$ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706
$ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
-Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -77,56 +82,56 @@ Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ sh fip/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ sh fip/blx_fix.sh \
- fip/bl2.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/acs.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.g12a.enc \
- --level v3
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
$ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
$ $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ $FIPDIR/g12a/aml_encrypt_g12a --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc \
- --ddrfw1 fip/ddr4_1d.fw \
- --ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
- --ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
- --level v3
-
-and then write the image to SD with:
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --level v3
+
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 26/33] doc: boards: amlogic: update documentation for SEI610
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (24 preceding siblings ...)
2023-03-20 11:46 ` [PATCH 25/33] doc: boards: amlogic: update documentation for SEI510 Christian Hewitt
@ 2023-03-20 11:46 ` Christian Hewitt
2023-03-20 11:46 ` [PATCH 27/33] doc: boards: amlogic: update documentation for U200 Christian Hewitt
` (7 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:46 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/sei610.rst | 118 ++++++++++++++++++-----------------
1 file changed, 61 insertions(+), 57 deletions(-)
diff --git a/doc/board/amlogic/sei610.rst b/doc/board/amlogic/sei610.rst
index 2d754497cc..84aaeff4ed 100644
--- a/doc/board/amlogic/sei610.rst
+++ b/doc/board/amlogic/sei610.rst
@@ -1,23 +1,22 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Amlogic SEI610
-=========================
+U-Boot for Amlogic SEI610 (S905X3)
+==================================
-SEI610 is a customer board manufactured by SEI Robotics with the following
-specifications:
+SEI610 is a customer board manufactured by SEI Robotics with the following specification:
- Amlogic S905X3 ARM Cortex-A55 quad-core SoC
- 2GB DDR4 SDRAM
- 10/100 Ethernet (Internal PHY)
- - 1 x USB 3.0 Host
- - 1 x USB Type-C DRD
- - 1 x FTDI USB Serial Debug Interface
+ - 1x USB 3.0 Host
+ - 1x USB Type-C DRD
+ - 1x FTDI USB Serial Debug Interface
- eMMC
- SDcard
- Infrared receiver
- SDIO WiFi Module
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -26,14 +25,20 @@ U-Boot compilation
$ make sei610_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `sei610`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh sei610 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -48,7 +53,7 @@ the git tree published by the board vendor:
$ make
$ export UBOOTDIR=$PWD
-Download the latest Amlogic Buildroot package, and extract it :
+Download the latest Amlogic buildroot package and extract it:
.. code-block:: bash
@@ -57,8 +62,7 @@ Download the latest Amlogic Buildroot package, and extract it :
$ export BRDIR=$PWD/buildroot-openlinux-A113-201901
$ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
-Go back to mainline U-Boot source tree then :
-
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -80,56 +84,56 @@ Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ sh fip/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ sh fip/blx_fix.sh \
- fip/bl2.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/acs.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.g12a.enc \
- --level v3
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
$ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
$ $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ $FIPDIR/g12a/aml_encrypt_g12a --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc \
- --ddrfw1 fip/ddr4_1d.fw \
- --ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
- --ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
- --level v3
-
-and then write the image to SD with:
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --level v3
+
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 27/33] doc: boards: amlogic: update documentation for U200
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (25 preceding siblings ...)
2023-03-20 11:46 ` [PATCH 26/33] doc: boards: amlogic: update documentation for SEI610 Christian Hewitt
@ 2023-03-20 11:46 ` Christian Hewitt
2023-03-20 11:46 ` [PATCH 28/33] doc: boards: amlogic: update documentation for W400 Christian Hewitt
` (6 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:46 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/u200.rst | 113 +++++++++++++++++++------------------
1 file changed, 59 insertions(+), 54 deletions(-)
diff --git a/doc/board/amlogic/u200.rst b/doc/board/amlogic/u200.rst
index 53213fdb68..6d1d66b4ea 100644
--- a/doc/board/amlogic/u200.rst
+++ b/doc/board/amlogic/u200.rst
@@ -1,15 +1,14 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Amlogic U200
-=======================
+U-Boot for Amlogic U200 (S905X2)
+================================
-U200 is a reference board manufactured by Amlogic with the following
-specifications:
+U200 is a reference board manufactured by Amlogic with the following specification:
- Amlogic S905D2 ARM Cortex-A53 quad-core SoC
- 2GB DDR4 SDRAM
- 10/100 Ethernet (Internal PHY)
- - 1 x USB 3.0 Host
+ - 1x USB 3.0 Host
- eMMC
- SDcard
- Infrared receiver
@@ -20,7 +19,7 @@ specifications:
Schematics are available from Amlogic on demand.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -29,14 +28,20 @@ U-Boot compilation
$ make u200_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `u200`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh u200 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -51,7 +56,7 @@ the git tree published by the board vendor:
$ make
$ export UBOOTDIR=$PWD
-Download the latest Amlogic Buildroot package, and extract it :
+Download the latest Amlogic buildroot package and extract it:
.. code-block:: bash
@@ -60,7 +65,7 @@ Download the latest Amlogic Buildroot package, and extract it :
$ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706
$ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
-Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -82,56 +87,56 @@ Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ sh fip/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ sh fip/blx_fix.sh \
- fip/bl2.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/acs.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.g12a.enc \
- --level v3
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
$ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
$ $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ $FIPDIR/g12a/aml_encrypt_g12a --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc \
- --ddrfw1 fip/ddr4_1d.fw \
- --ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
- --ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
- --level v3
-
-and then write the image to SD with:
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --level v3
+
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 28/33] doc: boards: amlogic: update documentation for W400
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (26 preceding siblings ...)
2023-03-20 11:46 ` [PATCH 27/33] doc: boards: amlogic: update documentation for U200 Christian Hewitt
@ 2023-03-20 11:46 ` Christian Hewitt
2023-03-20 11:46 ` [PATCH 29/33] doc: boards: amlogic: update documentation for WeTek Core2 Christian Hewitt
` (5 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:46 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/w400.rst | 115 ++++++++++++++++++++-----------------
1 file changed, 61 insertions(+), 54 deletions(-)
diff --git a/doc/board/amlogic/w400.rst b/doc/board/amlogic/w400.rst
index 38dbf52fb9..634fe1298d 100644
--- a/doc/board/amlogic/w400.rst
+++ b/doc/board/amlogic/w400.rst
@@ -1,15 +1,14 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for Amlogic W400
-=======================
+U-Boot for Amlogic W400 (S922X)
+===============================
-U200 is a reference board manufactured by Amlogic with the following
-specifications:
+W400 is a reference board manufactured by Amlogic with the following specification:
- Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
- 2GB DDR4 SDRAM
- 10/100 Ethernet (Internal PHY)
- - 1 x USB 3.0 Host
+ - 1x USB 3.0 Host
- eMMC
- SDcard
- Infrared receiver
@@ -20,7 +19,7 @@ specifications:
Schematics are available from Amlogic on demand.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -29,12 +28,20 @@ U-Boot compilation
$ make w400_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh jethub-j100 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
+
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -49,7 +56,7 @@ the git tree published by the board vendor:
$ make
$ export UBOOTDIR=$PWD
-Download the latest Amlogic Buildroot package, and extract it :
+Download the latest Amlogic buildroot package and extract it:
.. code-block:: bash
@@ -58,7 +65,7 @@ Download the latest Amlogic Buildroot package, and extract it :
$ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706
$ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
-Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -81,57 +88,57 @@ Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ sh fip/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ sh fip/blx_fix.sh \
- fip/bl2.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/acs.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $FIPDIR/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
- --output fip/bl30_new.bin.g12a.enc \
- --level v3
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
$ $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
- --output fip/bl30_new.bin.enc \
- --level v3 --type bl30
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
$ $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
- --output fip/bl31.img.enc \
- --level v3 --type bl31
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
$ $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
- --output fip/bl33.bin.enc \
- --level v3 --type bl33
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
$ $FIPDIR/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
- --output fip/bl2.n.bin.sig
+ --output fip/bl2.n.bin.sig
$ $FIPDIR/g12b/aml_encrypt_g12b --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc \
- --ddrfw1 fip/ddr4_1d.fw \
- --ddrfw2 fip/ddr4_2d.fw \
- --ddrfw3 fip/ddr3_1d.fw \
- --ddrfw4 fip/piei.fw \
- --ddrfw5 fip/lpddr4_1d.fw \
- --ddrfw6 fip/lpddr4_2d.fw \
- --ddrfw7 fip/diag_lpddr4.fw \
- --ddrfw8 fip/aml_ddr.fw \
- --level v3
-
-and then write the image to SD with:
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 29/33] doc: boards: amlogic: update documentation for WeTek Core2
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (27 preceding siblings ...)
2023-03-20 11:46 ` [PATCH 28/33] doc: boards: amlogic: update documentation for W400 Christian Hewitt
@ 2023-03-20 11:46 ` Christian Hewitt
2023-03-20 18:40 ` Simon Glass
2023-03-20 11:46 ` [PATCH 30/33] doc: boards: amlogic: add documentation for BananaPi CM4IO Christian Hewitt
` (4 subsequent siblings)
33 siblings, 1 reply; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:46 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Improve documentation.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/wetek-core2.rst | 83 +++++++++++++++++--------------
1 file changed, 47 insertions(+), 36 deletions(-)
diff --git a/doc/board/amlogic/wetek-core2.rst b/doc/board/amlogic/wetek-core2.rst
index 0147d5fbe2..5eba566af4 100644
--- a/doc/board/amlogic/wetek-core2.rst
+++ b/doc/board/amlogic/wetek-core2.rst
@@ -1,23 +1,24 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for WeTek Core2
-======================
+U-Boot for WeTek Core2 (S912)
+=============================
-WeTek Core2 is an Android STB based on the Q200 reference design with
-the following specifications:
+WeTek Core2 is an Android STB based on the Q200 reference design with the following
+specifications:
- Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz
- ARM Mali T820 GPU
- 3GB DDR4 SDRAM
- 10/100 Realtek RTL8152 Ethernet (internal USB)
- HDMI 2.0 4K/60Hz display
- - 2x USB 2.0 Host, 1x USB 2.0 OTG (internal)
+ - 2x USB 2.0 Host
+ - 1x USB 2.0 OTG (internal)
- 32GB eMMC
- microSD
- SDIO Wifi Module, Bluetooth
- Two channel IR receiver
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -26,15 +27,21 @@ U-Boot compilation
$ make wetek-core2_defconfig
$ make
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `wetek-core2`
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh wetek-core2 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
-Amlogic does not provide sources for the firmware or the tools needed
-to create the bootloader image, and WeTek has not publicly shared the
-precompiled FIP binaries. However the public Khadas VIM2 sources also
-work with the Core2 box so we can use the Khadas git tree:
+Amlogic does not provide firmware sources or tools needed to create the bootloader image
+and WeTek has not publicly shared the precompiled FIP binaries. However the Khadas VIM2
+sources also work with the Core2 box so we can use the Khadas git tree:
.. code-block:: bash
@@ -49,7 +56,7 @@ work with the Core2 box so we can use the Khadas git tree:
$ make
$ export FIPDIR=$PWD/fip
-Go back to mainline U-Boot source tree then:
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -61,38 +68,42 @@ Go back to mainline U-Boot source tree then:
$ cp $FIPDIR/gxl/bl301.bin fip/
$ cp $FIPDIR/gxl/bl31.img fip/
$ cp u-boot.bin fip/bl33.bin
+
$ $FIPDIR/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
$ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
+
$ $FIPDIR/blx_fix.sh \
- fip/bl2_acs.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/bl21.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
$ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc
-then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* Re: [PATCH 29/33] doc: boards: amlogic: update documentation for WeTek Core2
2023-03-20 11:46 ` [PATCH 29/33] doc: boards: amlogic: update documentation for WeTek Core2 Christian Hewitt
@ 2023-03-20 18:40 ` Simon Glass
2023-03-21 5:10 ` Christian Hewitt
0 siblings, 1 reply; 42+ messages in thread
From: Simon Glass @ 2023-03-20 18:40 UTC (permalink / raw)
To: Christian Hewitt; +Cc: u-boot, u-boot-amlogic, linux-amlogic
Hi Christian,
On Tue, 21 Mar 2023 at 06:05, Christian Hewitt
<christianshewitt@gmail.com> wrote:
>
> Improve documentation.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> doc/board/amlogic/wetek-core2.rst | 83 +++++++++++++++++--------------
> 1 file changed, 47 insertions(+), 36 deletions(-)
This should really move to binman. Would you like to take a look?
I sent a patch for this a while ago but it needs something to review
and try out.
https://patchwork.ozlabs.org/project/uboot/patch/20220110031413.1970836-39-sjg@chromium.org/
I am happy to do more on it as needed.
Regards.
Simon
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 29/33] doc: boards: amlogic: update documentation for WeTek Core2
2023-03-20 18:40 ` Simon Glass
@ 2023-03-21 5:10 ` Christian Hewitt
2023-04-01 6:33 ` Simon Glass
0 siblings, 1 reply; 42+ messages in thread
From: Christian Hewitt @ 2023-03-21 5:10 UTC (permalink / raw)
To: Simon Glass; +Cc: u-boot, u-boot-amlogic, linux-amlogic
> On 20 Mar 2023, at 10:40 pm, Simon Glass <sjg@chromium.org> wrote:
>
> Hi Christian,
>
> On Tue, 21 Mar 2023 at 06:05, Christian Hewitt
> <christianshewitt@gmail.com> wrote:
>>
>> Improve documentation.
>>
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>> ---
>> doc/board/amlogic/wetek-core2.rst | 83 +++++++++++++++++--------------
>> 1 file changed, 47 insertions(+), 36 deletions(-)
>
> This should really move to binman. Would you like to take a look?
>
> I sent a patch for this a while ago but it needs something to review
> and try out.
>
> https://patchwork.ozlabs.org/project/uboot/patch/20220110031413.1970836-39-sjg@chromium.org/
>
> I am happy to do more on it as needed.
Hello Simon,
For now this is just a cleanup but longer-term (won’t be quick) I can
take a look. Do you have that series rebased against current and in a
repo somewhere for easier cherry-picking?
Christian
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 29/33] doc: boards: amlogic: update documentation for WeTek Core2
2023-03-21 5:10 ` Christian Hewitt
@ 2023-04-01 6:33 ` Simon Glass
0 siblings, 0 replies; 42+ messages in thread
From: Simon Glass @ 2023-04-01 6:33 UTC (permalink / raw)
To: Christian Hewitt; +Cc: u-boot, u-boot-amlogic, linux-amlogic
Hi Christian,
On Tue, 21 Mar 2023 at 18:11, Christian Hewitt
<christianshewitt@gmail.com> wrote:
>
>
> > On 20 Mar 2023, at 10:40 pm, Simon Glass <sjg@chromium.org> wrote:
> >
> > Hi Christian,
> >
> > On Tue, 21 Mar 2023 at 06:05, Christian Hewitt
> > <christianshewitt@gmail.com> wrote:
> >>
> >> Improve documentation.
> >>
> >> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> >> ---
> >> doc/board/amlogic/wetek-core2.rst | 83 +++++++++++++++++--------------
> >> 1 file changed, 47 insertions(+), 36 deletions(-)
> >
> > This should really move to binman. Would you like to take a look?
> >
> > I sent a patch for this a while ago but it needs something to review
> > and try out.
> >
> > https://patchwork.ozlabs.org/project/uboot/patch/20220110031413.1970836-39-sjg@chromium.org/
> >
> > I am happy to do more on it as needed.
>
> Hello Simon,
>
> For now this is just a cleanup but longer-term (won’t be quick) I can
> take a look. Do you have that series rebased against current and in a
> repo somewhere for easier cherry-picking?
>
OK I sent a v2 patch.
Regards,
Simon
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH 30/33] doc: boards: amlogic: add documentation for BananaPi CM4IO
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (28 preceding siblings ...)
2023-03-20 11:46 ` [PATCH 29/33] doc: boards: amlogic: update documentation for WeTek Core2 Christian Hewitt
@ 2023-03-20 11:46 ` Christian Hewitt
2023-03-20 12:13 ` Neil Armstrong
2023-03-20 11:46 ` [PATCH 31/33] doc: boards: amlogic: add documentation for BananaPi M5 Christian Hewitt
` (3 subsequent siblings)
33 siblings, 1 reply; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:46 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Add build instructions for the BananaPi BPI-CM4IO carrier board with
BPI-CM4 module.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
board/amlogic/u200/MAINTAINERS | 1 -
board/amlogic/w400/MAINTAINERS | 2 +
doc/board/amlogic/bananapi-cm4io.rst | 152 +++++++++++++++++++++++++++
doc/board/amlogic/index.rst | 1 +
4 files changed, 155 insertions(+), 1 deletion(-)
create mode 100644 doc/board/amlogic/bananapi-cm4io.rst
diff --git a/board/amlogic/u200/MAINTAINERS b/board/amlogic/u200/MAINTAINERS
index 7535e489d1..47cec234a1 100644
--- a/board/amlogic/u200/MAINTAINERS
+++ b/board/amlogic/u200/MAINTAINERS
@@ -4,7 +4,6 @@ S: Maintained
L: u-boot-amlogic@groups.io
F: board/amlogic/u200/
F: configs/u200_defconfig
-F: configs/bananapi-cm4-cm4io_defconfig
F: configs/bananapi-m5_defconfig
F: configs/radxa-zero_defconfig
F: doc/board/amlogic/u200.rst
diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS
index 96ccda2001..26a4c2c587 100644
--- a/board/amlogic/w400/MAINTAINERS
+++ b/board/amlogic/w400/MAINTAINERS
@@ -3,4 +3,6 @@ M: Neil Armstrong <neil.armstrong@linaro.org>
S: Maintained
L: u-boot-amlogic@groups.io
F: board/amlogic/w400/
+F: configs/bananapi-cm4-cm4io_defconfig
F: doc/board/amlogic/w400.rst
+F: doc/board/amlogic/bananapi-cm4io.rst
diff --git a/doc/board/amlogic/bananapi-cm4io.rst b/doc/board/amlogic/bananapi-cm4io.rst
new file mode 100644
index 0000000000..aabe2ef197
--- /dev/null
+++ b/doc/board/amlogic/bananapi-cm4io.rst
@@ -0,0 +1,152 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for BananaPi CM4 with CM4IO (A311D)
+==========================================
+
+BPI-CM4 is a system-on-module board manufactured by Sinovoip. It follows the Raspberry Pi
+CM4 interface specification but with a single HDMI port and a single DSI output:
+
+ - Amlogic A311D Arm Cortex-A53 dual-core + Cortex-A73 quad-core SoC
+ - 4GB DDR4 SDRAM
+ - 16GB eMMC
+ - NPU
+ - HDMI 2.1 display
+ - Gigabit Ethernet
+ - RTL8822CS WiFi (a/b/g/n/ac) + BT 5.0
+
+BPI-CM4IO is a carrier board for the BPI-CM4 module with the following specification:
+
+ - CM4 interface
+ - HDMI interface
+ - MIPI CSI interface
+ - MIPI DSI interface
+ - Ethernet interface
+ - PCIe interface
+ - SD (micro)
+ - SIM (micro)
+ - 26-pin GPIO
+ - UART serial
+ - 1x USB-C (power)
+ - 2x USB 2.0
+
+Schematics are available from the manufacturer: https://wiki.banana-pi.org/Banana_Pi_BPI-CM4
+
+U-Boot Compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make bananapi-cm4io_defconfig
+ $ make
+
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh bananapi-cm4io /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
+
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
+
+.. code-block:: bash
+
+ $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+
+ $ DIR=bananapi-cm4io
+ $ git clone --depth 1 https://github.com/Dangku/amlogic-u-boot.git -b khadas-g12b-v2015.01-m2s $DIR
+
+ $ cd $DIR
+ $ make bananapi_cm4_defconfig
+ $ make
+ $ export UBDIR=$PWD
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+
+ $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
+ $ cp $UBDIR/build/scp_task/bl301.bin fip/
+ $ cp $UBDIR/build/board/bananapi/bananpi_cm4/firmware/acs.bin fip/
+ $ cp $UBDIR/fip/g12a/bl2.bin fip/
+ $ cp $UBDIR/fip/g12a/bl30.bin fip/
+ $ cp $UBDIR/fip/g12a/bl31.img fip/
+ $ cp $UBDIR/fip/g12a/ddr3_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/ddr4_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/ddr4_2d.fw fip/
+ $ cp $UBDIR/fip/g12a/diag_lpddr4.fw fip/
+ $ cp $UBDIR/fip/g12a/lpddr3_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/lpddr4_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/lpddr4_2d.fw fip/
+ $ cp $UBDIR/fip/g12a/piei.fw fip/
+ $ cp $UBDIR/fip/g12a/aml_ddr.fw fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33 --compress lz4
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --ddrfw9 fip/lpddr3_1d.fw \
+ --level v3
+
+Then write the image to SD or eMMC with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index 3eb1cf46e0..e3ed1158df 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -85,6 +85,7 @@ Board Documentation
.. toctree::
:maxdepth: 1
+ bananapi-cm4io
beelink-gtking
beelink-gtkingpro
jethub-j80
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* Re: [PATCH 30/33] doc: boards: amlogic: add documentation for BananaPi CM4IO
2023-03-20 11:46 ` [PATCH 30/33] doc: boards: amlogic: add documentation for BananaPi CM4IO Christian Hewitt
@ 2023-03-20 12:13 ` Neil Armstrong
2023-03-20 12:23 ` Christian Hewitt
0 siblings, 1 reply; 42+ messages in thread
From: Neil Armstrong @ 2023-03-20 12:13 UTC (permalink / raw)
To: u-boot-amlogic, christianshewitt, u-boot, linux-amlogic
On 20/03/2023 12:46, Christian Hewitt wrote:
> Add build instructions for the BananaPi BPI-CM4IO carrier board with
> BPI-CM4 module.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> board/amlogic/u200/MAINTAINERS | 1 -
> board/amlogic/w400/MAINTAINERS | 2 +
> doc/board/amlogic/bananapi-cm4io.rst | 152 +++++++++++++++++++++++++++
> doc/board/amlogic/index.rst | 1 +
> 4 files changed, 155 insertions(+), 1 deletion(-)
> create mode 100644 doc/board/amlogic/bananapi-cm4io.rst
>
<snip>
> +
> +U-Boot Signing with Pre-Built FIP repo
> +--------------------------------------
> +
> +.. code-block:: bash
> + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
> + $ cd amlogic-boot-fip
> + $ mkdir my-output-dir
> + $ ./build-fip.sh bananapi-cm4io /path/to/u-boot/u-boot.bin my-output-dir
This should be bananapi-m2s since the same is used, or we should duplicate it for cm4io/cm4.
Neil
<snip>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 30/33] doc: boards: amlogic: add documentation for BananaPi CM4IO
2023-03-20 12:13 ` Neil Armstrong
@ 2023-03-20 12:23 ` Christian Hewitt
2023-03-20 12:25 ` neil.armstrong
0 siblings, 1 reply; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 12:23 UTC (permalink / raw)
To: neil.armstrong; +Cc: u-boot-amlogic, u-boot, linux-amlogic
> On 20 Mar 2023, at 4:13 pm, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>
> On 20/03/2023 12:46, Christian Hewitt wrote:
>> Add build instructions for the BananaPi BPI-CM4IO carrier board with
>> BPI-CM4 module.
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>> ---
>> board/amlogic/u200/MAINTAINERS | 1 -
>> board/amlogic/w400/MAINTAINERS | 2 +
>> doc/board/amlogic/bananapi-cm4io.rst | 152 +++++++++++++++++++++++++++
>> doc/board/amlogic/index.rst | 1 +
>> 4 files changed, 155 insertions(+), 1 deletion(-)
>> create mode 100644 doc/board/amlogic/bananapi-cm4io.rst
>
> <snip>
>
>> +
>> +U-Boot Signing with Pre-Built FIP repo
>> +--------------------------------------
>> +
>> +.. code-block:: bash
>> + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
>> + $ cd amlogic-boot-fip
>> + $ mkdir my-output-dir
>> + $ ./build-fip.sh bananapi-cm4io /path/to/u-boot/u-boot.bin my-output-dir
>
>
> This should be bananapi-m2s since the same is used, or we should duplicate it for cm4io/cm4.
https://github.com/LibreELEC/amlogic-boot-fip/tree/master/bananapi-cm4io
^ It’s the same FIPs that were submitted for M2S but for packaging
reasons I cloned them (users struggle to find images not explicitly
named for their board). I’ll submit patches for the M2S and M2-Pro
boards once this series is accepted (hopefully).
Christian
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 30/33] doc: boards: amlogic: add documentation for BananaPi CM4IO
2023-03-20 12:23 ` Christian Hewitt
@ 2023-03-20 12:25 ` neil.armstrong
0 siblings, 0 replies; 42+ messages in thread
From: neil.armstrong @ 2023-03-20 12:25 UTC (permalink / raw)
To: Christian Hewitt; +Cc: u-boot-amlogic, u-boot, linux-amlogic
On 20/03/2023 13:23, Christian Hewitt wrote:
>
>> On 20 Mar 2023, at 4:13 pm, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>>
>> On 20/03/2023 12:46, Christian Hewitt wrote:
>>> Add build instructions for the BananaPi BPI-CM4IO carrier board with
>>> BPI-CM4 module.
>>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>>> ---
>>> board/amlogic/u200/MAINTAINERS | 1 -
>>> board/amlogic/w400/MAINTAINERS | 2 +
>>> doc/board/amlogic/bananapi-cm4io.rst | 152 +++++++++++++++++++++++++++
>>> doc/board/amlogic/index.rst | 1 +
>>> 4 files changed, 155 insertions(+), 1 deletion(-)
>>> create mode 100644 doc/board/amlogic/bananapi-cm4io.rst
>>
>> <snip>
>>
>>> +
>>> +U-Boot Signing with Pre-Built FIP repo
>>> +--------------------------------------
>>> +
>>> +.. code-block:: bash
>>> + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
>>> + $ cd amlogic-boot-fip
>>> + $ mkdir my-output-dir
>>> + $ ./build-fip.sh bananapi-cm4io /path/to/u-boot/u-boot.bin my-output-dir
>>
>>
>> This should be bananapi-m2s since the same is used, or we should duplicate it for cm4io/cm4.
>
> https://github.com/LibreELEC/amlogic-boot-fip/tree/master/bananapi-cm4io
>
> ^ It’s the same FIPs that were submitted for M2S but for packaging
> reasons I cloned them (users struggle to find images not explicitly
> named for their board). I’ll submit patches for the M2S and M2-Pro
> boards once this series is accepted (hopefully).
Ack, so no changes needed then !
>
> Christian
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH 31/33] doc: boards: amlogic: add documentation for BananaPi M5
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (29 preceding siblings ...)
2023-03-20 11:46 ` [PATCH 30/33] doc: boards: amlogic: add documentation for BananaPi CM4IO Christian Hewitt
@ 2023-03-20 11:46 ` Christian Hewitt
2023-03-20 11:46 ` [PATCH 32/33] doc: boards: amlogic: add documentation for GS-King-X Christian Hewitt
` (2 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:46 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Add missing build documentation for the BPI-M5 board.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/bananapi-m5.rst | 141 ++++++++++++++++++++++++++++++
doc/board/amlogic/index.rst | 1 +
2 files changed, 142 insertions(+)
create mode 100644 doc/board/amlogic/bananapi-m5.rst
diff --git a/doc/board/amlogic/bananapi-m5.rst b/doc/board/amlogic/bananapi-m5.rst
new file mode 100644
index 0000000000..ddc14b4eef
--- /dev/null
+++ b/doc/board/amlogic/bananapi-m5.rst
@@ -0,0 +1,141 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for BananaPi BPI-M5 (S905X3)
+===================================
+
+BananaPi BPI-M5 is a Single Board Computer manufactured by Sinovoip with the following
+specification:
+
+ - Amlogic S905X3 Arm Cortex-A55 quad-core SoC
+ - 4GB DDR4 SDRAM
+ - 16GB eMMC
+ - Gigabit Ethernet
+ - HDMI 2.1 display
+ - 40-pin GPIO header
+ - 4x USB 3.0 Host
+ - 1x USB-C (power)
+ - microSD
+ - UART serial
+ - Infrared receiver
+
+Schematics are available from the manufacturer: https://wiki.banana-pi.org/Banana_Pi_BPI-M5
+
+U-Boot Compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make bananapi-m5_defconfig
+ $ make
+
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh bananapi-m5 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
+
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
+
+.. code-block:: bash
+
+ $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+
+ $ DIR=bananapi-m5
+ $ git clone --depth 1 https://github.com/Dangku/amlogic-u-boot.git -b odroidg12-v2015.01-c4-m5 $DIR
+
+ $ cd $DIR
+ $ make bananapi_m5_defconfig
+ $ make
+ $ export UBOOTDIR=$PWD
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+
+ $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
+ $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/
+ $ cp $UBOOTDIR/build/board/bananapi/bananpi_m5/firmware/acs.bin fip/
+ $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/
+ $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/
+ $ cp $UBOOTDIR/fip/g12a/bl31.img fip/
+ $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/piei.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33 --compress lz4
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --ddrfw9 fip/lpddr3_1d.fw \
+ --level v3
+
+Then write the image to SD or eMMC with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index e3ed1158df..808c857622 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -86,6 +86,7 @@ Board Documentation
:maxdepth: 1
bananapi-cm4io
+ bananapi-m5
beelink-gtking
beelink-gtkingpro
jethub-j80
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 32/33] doc: boards: amlogic: add documentation for GS-King-X
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (30 preceding siblings ...)
2023-03-20 11:46 ` [PATCH 31/33] doc: boards: amlogic: add documentation for BananaPi M5 Christian Hewitt
@ 2023-03-20 11:46 ` Christian Hewitt
2023-03-20 11:46 ` [PATCH 33/33] doc: boards: amlogic: add documentation for ODROID-HC4 Christian Hewitt
2023-03-22 14:26 ` [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Neil Armstrong
33 siblings, 0 replies; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:46 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
GS-King-X is also supported with the beelink-s922x FIP sources and can use
the GT-King defconfig. Add a board document with instructions.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
board/amlogic/beelink-s922x/MAINTAINERS | 3 +-
doc/board/amlogic/beelink-gskingx.rst | 121 ++++++++++++++++++++++++
doc/board/amlogic/index.rst | 1 +
3 files changed, 124 insertions(+), 1 deletion(-)
create mode 100644 doc/board/amlogic/beelink-gskingx.rst
diff --git a/board/amlogic/beelink-s922x/MAINTAINERS b/board/amlogic/beelink-s922x/MAINTAINERS
index 47b622765a..8dddeb91d5 100644
--- a/board/amlogic/beelink-s922x/MAINTAINERS
+++ b/board/amlogic/beelink-s922x/MAINTAINERS
@@ -3,8 +3,9 @@ M: Christian Hewitt <christianshewitt@gmail.com>
S: Maintained
L: u-boot-amlogic@groups.io
F: board/amlogic/beelink-s922x/
+F: configs/beelink-gsking-x_defconfig
F: configs/beelink-gtking_defconfig
F: configs/beelink-gtkingpro_defconfig
-F: configs/beelink-gsking-x_defconfig
+F: doc/board/amlogic/beelink-gskingx.rst
F: doc/board/amlogic/beelink-gtking.rst
F: doc/board/amlogic/beelink-gtkingpro.rst
diff --git a/doc/board/amlogic/beelink-gskingx.rst b/doc/board/amlogic/beelink-gskingx.rst
new file mode 100644
index 0000000000..987d358c77
--- /dev/null
+++ b/doc/board/amlogic/beelink-gskingx.rst
@@ -0,0 +1,121 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Beelink GS-King-X (S922X)
+====================================
+
+The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference board with an
+S922X-H chip and the following specifications:
+
+- 4GB LPDDR4 RAM
+- 64GB eMMC storage
+- 10/100/1000 Base-T Ethernet
+- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
+- HDMI 2.1 video
+- S/PDIF optical output
+- 2x ESS9018 audio DACs
+- 4x Ricor RT6862 audio amps
+- Analogue headphone output
+- 1x USB 2.0 OTG port
+- 3x USB 3.0 ports
+- IR receiver
+- 1x micro SD card slot (internal)
+- USB SATA controller with 2x 3.5" drive bays
+- 1x Power on/off button
+
+Beelink do not provide public schematics, but have been willing to share them with known
+distro developers to assist with development.
+
+U-Boot Compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make beelink-gsking-x_defconfig
+ $ make
+
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh beelink-s922x /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
+
+Beelink released an Amlogic "SDK" dump in their forums but the U-Boot sources included
+result in 2GB RAM detected. The following FIPs were generated with newer sources and
+detect 4GB RAM: https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
+
+.. code-block:: bash
+
+ $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
+ $ unzip master.zip
+ $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+ $ cp $FIPDIR/* fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33
+ $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ fip/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --level v3
+
+Then write U-Boot to SD or eMMC with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index 808c857622..7c4c161e0d 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -87,6 +87,7 @@ Board Documentation
bananapi-cm4io
bananapi-m5
+ beelink-gskingx
beelink-gtking
beelink-gtkingpro
jethub-j80
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* [PATCH 33/33] doc: boards: amlogic: add documentation for ODROID-HC4
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (31 preceding siblings ...)
2023-03-20 11:46 ` [PATCH 32/33] doc: boards: amlogic: add documentation for GS-King-X Christian Hewitt
@ 2023-03-20 11:46 ` Christian Hewitt
2024-04-05 8:03 ` Heinrich Schuchardt
2023-03-22 14:26 ` [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Neil Armstrong
33 siblings, 1 reply; 42+ messages in thread
From: Christian Hewitt @ 2023-03-20 11:46 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic
Add separate documentation for the ODROID-HC4 board to ensure
users build U-Boot using the HC4 defconfig that enables PCIe
SATA boot. This avoids user frustration trying to boot after
using the C4 recipe which only works from SD card.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
doc/board/amlogic/index.rst | 1 +
doc/board/amlogic/odroid-hc4.rst | 141 +++++++++++++++++++++++++++++++
2 files changed, 142 insertions(+)
create mode 100644 doc/board/amlogic/odroid-hc4.rst
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index 7c4c161e0d..9b76bca427 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -101,6 +101,7 @@ Board Documentation
nanopi-k2
odroid-c2
odroid-c4
+ odroid-hc4
odroid-n2
odroid-n2l
odroid-go-ultra
diff --git a/doc/board/amlogic/odroid-hc4.rst b/doc/board/amlogic/odroid-hc4.rst
new file mode 100644
index 0000000000..94c3312022
--- /dev/null
+++ b/doc/board/amlogic/odroid-hc4.rst
@@ -0,0 +1,141 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for ODROID-HC4 (S905X3)
+==============================
+
+ODROID-HC4 is a variant of the ODROID-C4 single board computer manufactured by Hardkernel
+with the following specification:
+
+ - Amlogic S905X3 Arm Cortex-A55 quad-core SoC
+ - 4GB DDR4 SDRAM
+ - 16MB XT25F128B SPI-NOR flash
+ - Gigabit Ethernet
+ - HDMI 2.1 display
+ - 7-pin GPIO header for OLED display and RTC
+ - 1x USB 2.0 host (micro)
+ - 2x SATA ports via ASM1061 PCIe to SATA controller
+ - microSD
+ - UART serial
+ - Infrared receiver
+
+Schematics are available on the manufacturer website.
+
+U-Boot Compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make odroid-hc4_defconfig
+ $ make
+
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh odroid-hc4 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
+
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
+
+.. code-block:: bash
+
+ $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+
+ $ DIR=odroid-hc4
+ $ git clone --depth 1 https://github.com/hardkernel/u-boot.git -b odroidg12-v2015.01 $DIR
+
+ $ cd odroid-hc4
+ $ make odroidc4_defconfig
+ $ make
+ $ export UBOOTDIR=$PWD
+
+Go back to mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+
+ $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
+ $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/
+ $ cp $UBOOTDIR/build/board/hardkernel/odroidc4/firmware/acs.bin fip/
+ $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/
+ $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/
+ $ cp $UBOOTDIR/fip/g12a/bl31.img fip/
+ $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/piei.fw fip/
+ $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33 --compress lz4
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --ddrfw9 fip/lpddr3_1d.fw \
+ --level v3
+
+Then write U-Boot to SD or SPI-NOR with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 42+ messages in thread* Re: [PATCH 33/33] doc: boards: amlogic: add documentation for ODROID-HC4
2023-03-20 11:46 ` [PATCH 33/33] doc: boards: amlogic: add documentation for ODROID-HC4 Christian Hewitt
@ 2024-04-05 8:03 ` Heinrich Schuchardt
0 siblings, 0 replies; 42+ messages in thread
From: Heinrich Schuchardt @ 2024-04-05 8:03 UTC (permalink / raw)
To: Christian Hewitt; +Cc: u-boot, u-boot-amlogic, linux-amlogic
On 3/20/23 12:46, Christian Hewitt wrote:
> Add separate documentation for the ODROID-HC4 board to ensure
> users build U-Boot using the HC4 defconfig that enables PCIe
> SATA boot. This avoids user frustration trying to boot after
> using the C4 recipe which only works from SD card.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> doc/board/amlogic/index.rst | 1 +
> doc/board/amlogic/odroid-hc4.rst | 141 +++++++++++++++++++++++++++++++
> 2 files changed, 142 insertions(+)
> create mode 100644 doc/board/amlogic/odroid-hc4.rst
>
> diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
> index 7c4c161e0d..9b76bca427 100644
> --- a/doc/board/amlogic/index.rst
> +++ b/doc/board/amlogic/index.rst
> @@ -101,6 +101,7 @@ Board Documentation
> nanopi-k2
> odroid-c2
> odroid-c4
> + odroid-hc4
> odroid-n2
> odroid-n2l
> odroid-go-ultra
> diff --git a/doc/board/amlogic/odroid-hc4.rst b/doc/board/amlogic/odroid-hc4.rst
> new file mode 100644
> index 0000000000..94c3312022
> --- /dev/null
> +++ b/doc/board/amlogic/odroid-hc4.rst
> @@ -0,0 +1,141 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +U-Boot for ODROID-HC4 (S905X3)
> +==============================
> +
> +ODROID-HC4 is a variant of the ODROID-C4 single board computer manufactured by Hardkernel
> +with the following specification:
> +
> + - Amlogic S905X3 Arm Cortex-A55 quad-core SoC
> + - 4GB DDR4 SDRAM
> + - 16MB XT25F128B SPI-NOR flash
> + - Gigabit Ethernet
> + - HDMI 2.1 display
> + - 7-pin GPIO header for OLED display and RTC
> + - 1x USB 2.0 host (micro)
> + - 2x SATA ports via ASM1061 PCIe to SATA controller
> + - microSD
> + - UART serial
> + - Infrared receiver
> +
> +Schematics are available on the manufacturer website.
> +
> +U-Boot Compilation
> +------------------
> +
> +.. code-block:: bash
> +
> + $ export CROSS_COMPILE=aarch64-none-elf-
> + $ make odroid-hc4_defconfig
> + $ make
> +
> +U-Boot Signing with Pre-Built FIP repo
> +--------------------------------------
> +
> +.. code-block:: bash
> + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
> + $ cd amlogic-boot-fip
> + $ mkdir my-output-dir
> + $ ./build-fip.sh odroid-hc4 /path/to/u-boot/u-boot.bin my-output-dir
> +
> +U-Boot Manual Signing
> +---------------------
> +
> +Amlogic does not provide sources for the firmware and tools needed to create a bootloader
> +image so it is necessary to obtain binaries from sources published by the board vendor:
> +
> +.. code-block:: bash
> +
> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
> +
> + $ DIR=odroid-hc4
> + $ git clone --depth 1 https://github.com/hardkernel/u-boot.git -b odroidg12-v2015.01 $DIR
> +
> + $ cd odroid-hc4
> + $ make odroidc4_defconfig
> + $ make
> + $ export UBOOTDIR=$PWD
> +
> +Go back to mainline U-Boot source tree then:
> +
> +.. code-block:: bash
> +
> + $ mkdir fip
Thanks a lot for providing all these board descriptions.
Prefixing with $ makes copy-/pasting multiple commands impossible.
I personally feel distracted by the prompts. But if you really want
those $ signs displayed, please, use
.. prompt:: bash $
mkdir fip
Best regards
Heinrich
> +
> + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
> + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/
> + $ cp $UBOOTDIR/build/board/hardkernel/odroidc4/firmware/acs.bin fip/
> + $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/
> + $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/
> + $ cp $UBOOTDIR/fip/g12a/bl31.img fip/
> + $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/piei.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/
> + $ cp u-boot.bin fip/bl33.bin
> +
> + $ sh fip/blx_fix.sh \
> + fip/bl30.bin \
> + fip/zero_tmp \
> + fip/bl30_zero.bin \
> + fip/bl301.bin \
> + fip/bl301_zero.bin \
> + fip/bl30_new.bin \
> + bl30
> +
> + $ sh fip/blx_fix.sh \
> + fip/bl2.bin \
> + fip/zero_tmp \
> + fip/bl2_zero.bin \
> + fip/acs.bin \
> + fip/bl21_zero.bin \
> + fip/bl2_new.bin \
> + bl2
> +
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
> + --output fip/bl30_new.bin.g12a.enc \
> + --level v3
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
> + --output fip/bl30_new.bin.enc \
> + --level v3 --type bl30
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
> + --output fip/bl31.img.enc \
> + --level v3 --type bl31
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
> + --output fip/bl33.bin.enc \
> + --level v3 --type bl33 --compress lz4
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
> + --output fip/bl2.n.bin.sig
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
> + --output fip/u-boot.bin \
> + --bl2 fip/bl2.n.bin.sig \
> + --bl30 fip/bl30_new.bin.enc \
> + --bl31 fip/bl31.img.enc \
> + --bl33 fip/bl33.bin.enc \
> + --ddrfw1 fip/ddr4_1d.fw \
> + --ddrfw2 fip/ddr4_2d.fw \
> + --ddrfw3 fip/ddr3_1d.fw \
> + --ddrfw4 fip/piei.fw \
> + --ddrfw5 fip/lpddr4_1d.fw \
> + --ddrfw6 fip/lpddr4_2d.fw \
> + --ddrfw7 fip/diag_lpddr4.fw \
> + --ddrfw8 fip/aml_ddr.fw \
> + --ddrfw9 fip/lpddr3_1d.fw \
> + --level v3
> +
> +Then write U-Boot to SD or SPI-NOR with:
> +
> +.. code-block:: bash
> +
> + $ DEV=/dev/boot_device
> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs
2023-03-20 11:45 [PATCH 00/33] doc: board: amlogic: spring clean-up of Amlogic docs Christian Hewitt
` (32 preceding siblings ...)
2023-03-20 11:46 ` [PATCH 33/33] doc: boards: amlogic: add documentation for ODROID-HC4 Christian Hewitt
@ 2023-03-22 14:26 ` Neil Armstrong
33 siblings, 0 replies; 42+ messages in thread
From: Neil Armstrong @ 2023-03-22 14:26 UTC (permalink / raw)
To: u-boot, u-boot-amlogic, linux-amlogic, Christian Hewitt
Hi,
On Mon, 20 Mar 2023 11:45:36 +0000, Christian Hewitt wrote:
> Amlogic documentation spans U-Boot support from 2015-current resulting
> in older content being harder to follow. And due to many international
> contributors the docs also contain grammar quirks.
>
> This series reworks all board documents to be more consistent. There is
> deliberate emphasis on using the amlogic-boot-fip repo for signing tasks
> as this is easier for most users to follow. The original/longer signing
> process (described as Manual Signing) has been tidied up.
>
> [...]
Thanks, Applied to https://source.denx.de/u-boot/custodians/u-boot-amlogic (u-boot-amlogic-test)
[01/33] doc: boards: amlogic: update documentation for index page
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/862b7c1fcc5e94c7d91cc9caf22c7b6205b7fffd
[02/33] doc: boards: amlogic: update documentation for boot-flow
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/4ce746b8cf07ed4c532a36fda587104d667bf54a
[03/33] doc: boards: amlogic: update documentation for pre-generated-fip's
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/3d1744b392ae57adfa1c068acb9f94a44cc82070
[04/33] doc: boards: amlogic: update documentation for Beelink GT-King
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/d0d4a85d14b18dda87ef0111a03644a9886aebd4
[05/33] doc: boards: amlogic: update documentation for Beelink GT-King Pro
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/c03d19d5dc0e20dde9c4b34feb0f47c59a82a640
[06/33] doc: boards: amlogic: update documentation for JetHub J100
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/cf43c9f7d3c7b4b83a94a9ff961b0807f4f92c47
[07/33] doc: boards: amlogic: update documentation for JetHub J80
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/47ab069e9a9dd047dcad3c984d8e6cbcb6e26a04
[08/33] doc: boards: amlogic: update documentation for Khadas VIM
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/329794577adf7e53ba1e0c3a86686e21655965c1
[09/33] doc: boards: amlogic: update documentation for Khadas VIM2
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/e3de21c60685d15fd5746b23a7d72545889580cd
[10/33] doc: boards: amlogic: update documentation for Khadas VIM3
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/de54d4cc16b9d4bfdda196dac5bdbd0d8128cd02
[11/33] doc: boards: amlogic: update documentation for Khadas VIM3L
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/3240318b212d46e1e5ea4af92eec6b26b67f5ad4
[12/33] doc: boards: amlogic: update documentation for LaFrite
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/cb197ca63debc82d23a8ca419623278839b6ff48
[13/33] doc: boards: amlogic: update documentation for LePotato
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/ba07d965dd5ee74e66c32bc5a3fce5c69ed4b2d2
[14/33] doc: boards: amlogic: update documentation for NanoPi-K2
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/7c7ecc84f1c1edb79e7e2b1e0070b288cf1e22fc
[15/33] doc: boards: amlogic: update documentation for ODROID-C2
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/665633ec055d15989e187861ea419518bf517017
[16/33] doc: boards: amlogic: update documentation for ODROID-C4
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/4760b2e8e2e46ad61ab7ed91733786d9a9e4696c
[17/33] doc: boards: amlogic: update documentation for ODROID GO ULTRA
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/144ffe96aa1638028593afa2b669bcf08ac0ad38
[18/33] doc: boards: amlogic: update documentation for ODROID-N2/N2+
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/11a1fc1d305e773f27135adad56cbcc5e1c2bd6a
[19/33] doc: boards: amlogic: update documentation for ODROID-N2L
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/6ba5d42c42752829b22f80748972716d5bb27c59
[20/33] doc: boards: amlogic: update documentation for P200
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/f0b8c1f6a54b8ef45972a18e969250d859c9a866
[21/33] doc: boards: amlogic: update documentation for P201
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/db6b333e37c2a98e2bcc09a5545635aaeb2c1301
[22/33] doc: boards: amlogic: update documentation for Q200
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/3ce3109c3783c27aa18b0a17eb6d8ead23f92d85
[23/33] doc: boards: amlogic: update documentation for Radxa Zero
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/1b23862b4177151b477d740e8760d45978549926
[24/33] doc: boards: amlogic: update documentation for S400
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/aabf0dcb31dce2443975ab21871fa32077a89e1f
[25/33] doc: boards: amlogic: update documentation for SEI510
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/d784394073bcb1884628621899d41a6b82c626e8
[26/33] doc: boards: amlogic: update documentation for SEI610
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/02b7453f2b573ca9fba83cc671a7732e090df020
[27/33] doc: boards: amlogic: update documentation for U200
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/d7a3034b40894c7d065de1b4070da7cef8574150
[28/33] doc: boards: amlogic: update documentation for W400
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/d00df62bdafd7ac570a08f7f812f547155a394f8
[29/33] doc: boards: amlogic: update documentation for WeTek Core2
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/433ed65e21eb3778b460d550a0d5af3cb4e5d7ca
[30/33] doc: boards: amlogic: add documentation for BananaPi CM4IO
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/4f94b51561ea2e6b9e5b12ca7b2dbedf96ca81ab
[31/33] doc: boards: amlogic: add documentation for BananaPi M5
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/e2b60c150c3b6a418e286945cc337d6efffa1f11
[32/33] doc: boards: amlogic: add documentation for GS-King-X
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/d0072d1bd98477ae3ab701633db9630c242846d8
[33/33] doc: boards: amlogic: add documentation for ODROID-HC4
https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/f288eeb66306187d97cc45a2781e0804cc840093
--
Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 42+ messages in thread