From: Simon Huelck <simonmail@gmx.de>
To: Emiliano Ingrassia <ingrassia@epigenesys.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-amlogic@lists.infradead.org, netdev@vger.kernel.org,
alexandre.torgue@st.com, Gpeppe.cavallaro@st.com
Subject: Re: stmmac / meson8b-dwmac
Date: Thu, 7 Feb 2019 20:30:19 +0100 [thread overview]
Message-ID: <3001f244-8904-1e89-9595-62a65a7b32ae@gmx.de> (raw)
In-Reply-To: <20190206103645.GA2482@ingrassia.epigenesys.com>
Hi Guys,
i can confirm better performance with 4.14.29
- ~900 MBits with iperf2 in one way
-~ 500 - 600MBits with iperf2 in duplex in both directions
This wasnt the case with 4.17.9, not with 4.18, 4.19 or the 5.0 series.....
How can i help further ?
regards,
Simon
Am 06.02.2019 um 11:36 schrieb Emiliano Ingrassia:
> Hi Martin, Hi Simon,
>
> On Mon, Feb 04, 2019 at 03:34:41PM +0100, Martin Blumenstingl wrote:
>> On Thu, Jan 17, 2019 at 10:23 PM Simon Huelck <simonmail@gmx.de> wrote:
>> [...]
>>>>> I got problems with my ODROID c2 running on 4.19.16 ( and some releases
>>>>> earlier ). the stmmac / dwmac driver doesnt provide the 800M/900M
>>>>> performance that i was used to earlier.
>>>>>
> Simon, did you ever reach 1 Gbps full duplex speed?
> If yes, what was the kernel version did you use?
>
>>>>> Now im stuck near 550M/600M in the same environment. but what really
>>>>> confuses me that duplex does hurt even more.
>>>> interesting that you see this on the Odroid-C2 as well.
>>>> previously I have only observed it on an Odroid-C1
>>>>
>>>>> PC --- VLAN3 --> switch --VLAN3--> ODROID
>>>>>
>>>>> NAS <-- VLAN1 -- switch <-- VLAN1-- ODROID
>>>>>
>>>>>
>>>>> this means when im doing a iperf from PC to NAS, that my ODROID has load
>>>>> on RX/TX same time (duplex). this shouldnt be an issue , all is 1GBits
>>>>> FD. And in the past that wasnt an issue.
>> +Cc Emiliano who has seen a similar duplex issue on his Odroid-C1: [0]
>> (please note that all kernels prior to v5.1 with the pending patches
>> from [1] applied are only receiving data on RXD0 and RXD1 but not on
>> RXD2 and RXD3)
>>
>> Emiliano, can you confirm the duplex issue observed by Simon is
>> similar to the one you see on your Odroid-C1?
>>
> It could be but, if I understand correctly, Simon is limited in
> speed also in half duplex transmission (~550/600 Mbps), while we can
> reach at least 900 Mbps.
>
>>>>>
>>>>> Now what happens:
>>>>>
>>>>> - benchmark between PC - ODROID is roughly 550M
>>>>>
>>>>> - benchmark between NAS - ODROID is roughly 550M
>>>>>
>>>>> - benchmark between PC - NAS is only around 300M
>>>>>
>>>>>
>>>>> and like i said i was easliy able to hit 800 or even 900M to my NAS
>>>>> earlier. I applied some .dtb fixes for interrupt levels for the
>>>>> meson-gx.dtsi and meson-gxbb-odroid-c2.dtb, which will be mainlined ,
>>>>> but the effect stayed identical.
>>>> good that you have the interrupt patches already applied
>>>> I believe it don't fix any performance issues - it's a fix for the
>>>> Ethernet controller seemingly getting "stuck" (not processing data
>>>> anymore). however, that already rules out one potential issue
>>>>
>>>>> are you aware of this problem ? Earlier kernel versions were all
>>>>> perfectly fine and i stepped ( self compiled) kernel through all major
>>>>> releases since odroid c2 was mainlined.
>> Guiseppe, Alexandre: what kind of data do you need from us if we see
>> the speeds drop (in both directions) when we send and receive at the
>> same time?
>>
>> [...]
>>> the problem is that i dont have these kernel sources anymore :-(. but i
>>> can provide some testing and numbers. maybe i dig if i got these kernel
>>> configs somewhere around but i did not change much during migrating
>> do you remember the kernel version where it worked fine?
>>
>>> im using a zyxel gs1900-8 switch and a qnap ts231p , and as i said i
>>> didnt change my setup. i was able to hit 100MByte/s from my NAS , so
>>> close to the benchmarks of 900MBit/s
>> I typically only do small transfers or I have traffic only in one direction.
>> thus it's likely that I missed this in my own tests
>>
>>
>> Regards
>> Martin
>>
>>
>> [0] http://lists.infradead.org/pipermail/linux-amlogic/2018-December/009679.html
>> [1] https://patchwork.kernel.org/cover/10744905/
> Regards,
>
> Emiliano
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-02-07 19:30 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <a38e643c-ed9f-c306-cc95-84f70ebc1f10@gmx.de>
[not found] ` <CAFBinCDebPOsmrhSXecx48nGWHh7g_OGPbr1Y0M+n_v9Ht91ew@mail.gmail.com>
2019-01-17 21:23 ` stmmac / meson8b-dwmac Simon Huelck
2019-02-04 14:34 ` Martin Blumenstingl
2019-02-06 10:36 ` Emiliano Ingrassia
2019-02-06 18:04 ` Simon Huelck
2019-02-06 21:21 ` Simon Huelck
2019-02-07 19:30 ` Simon Huelck [this message]
2019-02-09 1:09 ` Martin Blumenstingl
2019-02-11 13:44 ` Jose Abreu
2019-02-14 7:21 ` Simon Huelck
2019-02-17 14:48 ` Martin Blumenstingl
2019-02-17 19:13 ` Simon Huelck
2019-02-18 8:42 ` Jose Abreu
2019-02-18 8:45 ` Jose Abreu
2019-02-18 12:33 ` Simon Huelck
2019-02-18 12:41 ` Jose Abreu
2019-02-18 13:02 ` Jose Abreu
2019-02-18 15:29 ` Simon Huelck
2019-02-18 15:31 ` Jose Abreu
2019-02-18 15:53 ` Simon Huelck
2019-02-18 16:26 ` Jose Abreu
2019-02-18 16:40 ` Simon Huelck
2019-02-18 16:43 ` Jose Abreu
2019-02-18 16:51 ` Simon Huelck
2019-02-18 17:05 ` Jose Abreu
2019-02-18 18:05 ` Simon Huelck
2019-02-19 8:47 ` Jose Abreu
2019-02-19 19:41 ` Simon Huelck
2019-02-21 14:21 ` Jerome Brunet
2019-02-21 17:27 ` Simon Huelck
2019-02-21 17:46 ` Jerome Brunet
2019-02-21 19:34 ` Simon Huelck
2019-02-22 17:21 ` Anand Moon
2019-02-24 15:00 ` Simon Huelck
2019-02-24 15:02 ` Simon Huelck
2019-02-24 19:42 ` Sebastian Gottschall
2019-02-24 20:34 ` Simon Huelck
2019-02-27 11:09 ` Jose Abreu
2019-02-27 19:02 ` Simon Huelck
2019-03-01 9:23 ` Jose Abreu
2019-03-05 9:55 ` Simon Huelck
2019-03-06 11:35 ` Simon Huelck
2019-03-06 11:45 ` Simon Huelck
2019-05-11 14:53 ` Simon Huelck
2019-05-13 9:07 ` Jose Abreu
2019-05-22 12:48 ` Simon Huelck
2019-05-22 14:02 ` Neil Armstrong
2019-02-27 21:03 ` Simon Huelck
2019-02-18 17:05 ` Simon Huelck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3001f244-8904-1e89-9595-62a65a7b32ae@gmx.de \
--to=simonmail@gmx.de \
--cc=Gpeppe.cavallaro@st.com \
--cc=alexandre.torgue@st.com \
--cc=ingrassia@epigenesys.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).