Linux-Amlogic Archive on lore.kernel.org
 help / Atom feed
* [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity
@ 2019-01-10 15:40 Loys Ollivier
  2019-01-11  1:28 ` Kevin Hilman
  2019-01-11 19:46 ` Martin Blumenstingl
  0 siblings, 2 replies; 5+ messages in thread
From: Loys Ollivier @ 2019-01-10 15:40 UTC (permalink / raw)
  To: devicetree, Kevin Hilman, linux-amlogic
  Cc: Martin Blumenstingl, Linus Walleij, Loys Ollivier, linux-mmc,
	linux-kernel, linux-arm-kernel, Jerome Brunet

Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
changed the behavior of "cd-inverted" to follow the device tree bindings
specification.
Lines specifying "cd-inverted" are now "active high".

Fix the SD card for meson by setting the cd-gpios as "active low" according
to the boards specifications.

Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
---

v3: fix typos in the commit message

v2: fix more occurences, also in other meson boards.

 arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi            | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts           | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts         | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts            | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi               | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi           | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi              | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts   | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts    | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi          | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts          | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts            | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts             | 3 +--
 14 files changed, 14 insertions(+), 28 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index e14e0ce7e89f..016641a41694 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -187,8 +187,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 8cd50b75171d..ade2ee09ae96 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -305,8 +305,7 @@
 	max-frequency = <200000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vddio_ao3v3>;
 	vqmmc-supply = <&vddio_tf>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 4cf7f6e80c6a..25105ac96d55 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -238,8 +238,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_card>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 2e1cd5e3a246..1cc9dc68ef00 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -258,8 +258,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&tflash_vdd>;
 	vqmmc-supply = <&tf_io>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index ce862266b9aa..0be0f2a5d2fe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -196,8 +196,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_card>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 93a4acf2c46c..ad4d50bd9d77 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -154,8 +154,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vcc_3v3>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index ec09bb5792b7..2d2db783c44c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -211,8 +211,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vcc_3v3>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
index f1c410e2da2b..796baea7a0bf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -131,8 +131,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_card>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index db293440e4ca..255cede7b447 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -238,8 +238,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vcc_3v3>;
 	vqmmc-supply = <&vcc_card>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 6739697be1de..9cbdb85fb591 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -183,8 +183,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_card>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index a1b31013ab6e..bc811a2faf42 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -137,8 +137,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 3c3a667a8df8..3f086ed7de05 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -356,8 +356,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index f7a1cffab4a8..8acfd40090d2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -147,8 +147,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 7212dc4531e4..7fa20a8ede17 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -170,8 +170,7 @@
 	max-frequency = <100000000>;
 	disable-wp;
 
-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
-- 
2.7.4


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity
  2019-01-10 15:40 [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity Loys Ollivier
@ 2019-01-11  1:28 ` Kevin Hilman
  2019-01-11 19:46 ` Martin Blumenstingl
  1 sibling, 0 replies; 5+ messages in thread
From: Kevin Hilman @ 2019-01-11  1:28 UTC (permalink / raw)
  To: Loys Ollivier, devicetree, linux-amlogic
  Cc: Martin Blumenstingl, Linus Walleij, Loys Ollivier, linux-mmc,
	linux-kernel, linux-arm-kernel, Jerome Brunet

Loys Ollivier <lollivier@baylibre.com> writes:

> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> changed the behavior of "cd-inverted" to follow the device tree bindings
> specification.
> Lines specifying "cd-inverted" are now "active high".
>
> Fix the SD card for meson by setting the cd-gpios as "active low" according
> to the boards specifications.
>
> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> Signed-off-by: Loys Ollivier <lollivier@baylibre.com>

Thanks for fixing this!

Queued as a fix for v5.1-rc,

I see that this is being fixed in the driver also, but I think fixing
the DTs is necessary also.

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity
  2019-01-10 15:40 [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity Loys Ollivier
  2019-01-11  1:28 ` Kevin Hilman
@ 2019-01-11 19:46 ` Martin Blumenstingl
  2019-01-11 19:55   ` Kevin Hilman
  1 sibling, 1 reply; 5+ messages in thread
From: Martin Blumenstingl @ 2019-01-11 19:46 UTC (permalink / raw)
  To: Loys Ollivier
  Cc: devicetree, Kevin Hilman, Linus Walleij, linux-mmc, linux-kernel,
	linux-amlogic, linux-arm-kernel, Jerome Brunet

Hi,

some nit-picks as well as my Tested-by (in case it's not too late) below.
thank you for taking care of this!

On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@baylibre.com> wrote:
>
> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> changed the behavior of "cd-inverted" to follow the device tree bindings
> specification.
> Lines specifying "cd-inverted" are now "active high".
this depends on the polarity from the cd-gpios property. above commit
caused cd-inverted to be applied twice (effectively making it a
no-op). thus "cd-inverted" only means "active high" if cd-gpios also
sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW
together with "cd-inverted" then the GPIO will be treated as active
low.

> Fix the SD card for meson by setting the cd-gpios as "active low" according
> to the boards specifications.
not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted"

> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
in my patches for the 32-bit boards I used the commit which added SD
card support to the board for the Fixes tag. however, I'm fine with
this as well (I just wanted to point out that there's a small
difference in our commits).

> Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
on my Khadas VIM(1), using Kevin's v5.0/fixes branch:
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>


Regards
Martin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity
  2019-01-11 19:46 ` Martin Blumenstingl
@ 2019-01-11 19:55   ` Kevin Hilman
  2019-01-14 13:30     ` Loys Ollivier
  0 siblings, 1 reply; 5+ messages in thread
From: Kevin Hilman @ 2019-01-11 19:55 UTC (permalink / raw)
  To: Martin Blumenstingl, Loys Ollivier
  Cc: devicetree, Linus Walleij, linux-mmc, linux-kernel,
	linux-amlogic, linux-arm-kernel, Jerome Brunet

Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:

> Hi,
>
> some nit-picks as well as my Tested-by (in case it's not too late) below.
> thank you for taking care of this!
>
> On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@baylibre.com> wrote:
>>
>> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
>> changed the behavior of "cd-inverted" to follow the device tree bindings
>> specification.
>> Lines specifying "cd-inverted" are now "active high".
> this depends on the polarity from the cd-gpios property. above commit
> caused cd-inverted to be applied twice (effectively making it a
> no-op). thus "cd-inverted" only means "active high" if cd-gpios also
> sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW
> together with "cd-inverted" then the GPIO will be treated as active
> low.
>
>> Fix the SD card for meson by setting the cd-gpios as "active low" according
>> to the boards specifications.
> not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted"
>
>> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> in my patches for the 32-bit boards I used the commit which added SD
> card support to the board for the Fixes tag. however, I'm fine with
> this as well (I just wanted to point out that there's a small
> difference in our commits).
>
>> Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
> on my Khadas VIM(1), using Kevin's v5.0/fixes branch:
> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

I can add this tested-by tag in my v5.0/fixes branch for now, and can
replace it with a follow up if Loys can update the changelog with your
suggestions/clarifications.

Thanks,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity
  2019-01-11 19:55   ` Kevin Hilman
@ 2019-01-14 13:30     ` Loys Ollivier
  0 siblings, 0 replies; 5+ messages in thread
From: Loys Ollivier @ 2019-01-14 13:30 UTC (permalink / raw)
  To: Martin Blumenstingl
  Cc: devicetree, Kevin Hilman, Linus Walleij, Loys Ollivier,
	linux-mmc, linux-kernel, linux-amlogic, linux-arm-kernel,
	Jerome Brunet


Hello,

On Fri 11 Jan 2019 at 19:55, Kevin Hilman wrote:

> Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
>
>> Hi,
>>
>> some nit-picks as well as my Tested-by (in case it's not too late) below.
>> thank you for taking care of this!
>>
You're welcome !
>> On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@baylibre.com> 
>> wrote:
>>>
>>> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
>>> changed the behavior of "cd-inverted" to follow the device tree bindings
>>> specification.
>>> Lines specifying "cd-inverted" are now "active high".
>> this depends on the polarity from the cd-gpios property. above commit
>> caused cd-inverted to be applied twice (effectively making it a
>> no-op). thus "cd-inverted" only means "active high" if cd-gpios also
>> sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW
>> together with "cd-inverted" then the GPIO will be treated as active
>> low.
>>
Hum ok so there's more to it than the commit message. I'll come by with
something clearer for a v4. Thank you for the clarification.
>>> Fix the SD card for meson by setting the cd-gpios as "active low" 
>>> according
>>> to the boards specifications.
>> not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted"
>>
Indeed.
>>> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
>> in my patches for the 32-bit boards I used the commit which added SD
>> card support to the board for the Fixes tag. however, I'm fine with
>> this as well (I just wanted to point out that there's a small
>> difference in our commits).
>>
OK, I treat fixes tags as:
from the introduction (or discovery) of a regression (or bug), the
"Fixes" commit will patch the commit that introduced the regression.
Hence why I tagged the commit from which the platform was not acting
correctly anymore. If that's fine for you it's fine for me as well :) 
>>> Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
>> on my Khadas VIM(1), using Kevin's v5.0/fixes branch:
>> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>
> I can add this tested-by tag in my v5.0/fixes branch for now, and can
> replace it with a follow up if Loys can update the changelog with your
> suggestions/clarifications.
>
Will do.
> Thanks,
>
> Kevin


-- 
-L

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-10 15:40 [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity Loys Ollivier
2019-01-11  1:28 ` Kevin Hilman
2019-01-11 19:46 ` Martin Blumenstingl
2019-01-11 19:55   ` Kevin Hilman
2019-01-14 13:30     ` Loys Ollivier

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox