Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: khilman@baylibre.com, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org
Subject: Re: [PATCH 3/3] arm64: dts: meson: g12a: Add hwrng node
Date: Mon, 20 May 2019 19:45:58 +0200
Message-ID: <CAFBinCD6wJnYd3-E=kS6WCZLFebV9JYk-GybBxoMA8qQqGfSHw@mail.gmail.com> (raw)
In-Reply-To: <20190520134817.25435-4-narmstrong@baylibre.com>

Hi Neil,

On Mon, May 20, 2019 at 3:49 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> The Amlogic G12A has the hwrng module in an unknown "EFUSE" bus.
>
> The hwrng is not enabled on the vendor G12A DTs, but is enabled on
> next generation SM1 SoC family sharing the exact same memory mapping.
>
> Let's add the "EFUSE" bus and the hwrng node.
>
> This hwrng has been checked with the rng-tools rngtest FIPS tool :
> rngtest: starting FIPS tests...
> rngtest: bits received from input: 1630240032
> rngtest: FIPS 140-2 successes: 81436
> rngtest: FIPS 140-2 failures: 76
> rngtest: FIPS 140-2(2001-10-10) Monobit: 10
> rngtest: FIPS 140-2(2001-10-10) Poker: 6
> rngtest: FIPS 140-2(2001-10-10) Runs: 26
> rngtest: FIPS 140-2(2001-10-10) Long run: 34
> rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
> rngtest: input channel speed: (min=3.784; avg=5687.521; max=19073.486)Mibits/s
> rngtest: FIPS tests speed: (min=47.684; avg=52.348; max=52.835)Mibits/s
> rngtest: Program run time: 30000987 microseconds
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> index 8fcdd12f684a..19ef6a467d63 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> @@ -197,6 +197,19 @@
>                                 };
>                         };
>
> +                       apb_efuse: bus@30000 {
> +                               compatible = "simple-bus";
> +                               reg = <0x0 0x30000 0x0 0x1000>;
the public S922X datasheet lists the range as FF630000 - FF631FFF
that translates to a size of 0x2000, which the vendor kernel
(kernel/aml-4.9/arch/arm64/boot/dts/amlogic/mesong12a.dtsi from
buildroot-openlinux-A113-201901) seems to use as well:
  io_efuse_base{
    reg = <0x0 0xff630000 0x0 0x2000>;
  };

where did you take the size from?

> +                               #address-cells = <2>;
> +                               #size-cells = <2>;
> +                               ranges = <0x0 0x0 0x0 0x30000 0x0 0x1000>;
(see reg property above)

> +
> +                               hwrng: rng {
this should be rng@218


Martin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-20 13:48 [PATCH 0/3] arm64: dts: meson: g12a: add drive strength and hwrng Neil Armstrong
2019-05-20 13:48 ` [PATCH 1/3] arm64: dts: meson: g12a: add drive-strength hdmi ddc pins Neil Armstrong
2019-05-20 17:51   ` Martin Blumenstingl
2019-05-23 16:13     ` Kevin Hilman
2019-05-20 13:48 ` [PATCH 2/3] arm64: dts: meson: g12a: add drive strength for eth pins Neil Armstrong
2019-05-20 17:52   ` Martin Blumenstingl
2019-05-23 16:13     ` Kevin Hilman
2019-05-20 13:48 ` [PATCH 3/3] arm64: dts: meson: g12a: Add hwrng node Neil Armstrong
2019-05-20 17:45   ` Martin Blumenstingl [this message]
2019-05-21  8:31     ` Neil Armstrong
2019-05-23 16:13       ` Kevin Hilman

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAFBinCD6wJnYd3-E=kS6WCZLFebV9JYk-GybBxoMA8qQqGfSHw@mail.gmail.com' \
    --to=martin.blumenstingl@googlemail.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox