[PATCH 0/3] arm64: dts: meson: g12a: add drive strength and hwrng

[PATCH 0/3] arm64: dts: meson: g12a: add drive strength and hwrng

[Neil Armstrong]

This patchset adds :
- drive strength for the HDMI DDC and Ethernet pads
- HWRNG node

Dependencies: 
- None

Neil Armstrong (3):
  arm64: dts: meson: g12a: add drive-strength hdmi ddc pins
  arm64: dts: meson: g12a: add drive strength for eth pins
  arm64: dts: meson: g12a: Add hwrng node

 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 1/3] arm64: dts: meson: g12a: add drive-strength hdmi ddc pins

[Neil Armstrong]

With the default boot settings, the DDC drive strength is too weak,
set the driver-strengh to 4mA to avoid errors on the DDC line.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 5b4942c73e65..aa678d92238b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -327,6 +327,7 @@
 								 "hdmitx_sck";
 							function = "hdmitx";
 							bias-disable;
+							drive-strength-microamp = <4000>;
 						};
 					};
 
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 2/3] arm64: dts: meson: g12a: add drive strength for eth pins

[Neil Armstrong]

With the X96 Max board using an external Gigabit Ethernet PHY,
add the same driver strength to the Ethernet pins as the vendor
tree.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index aa678d92238b..8fcdd12f684a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -263,6 +263,7 @@
 								 "eth_txd0",
 								 "eth_txd1";
 							function = "eth";
+							drive-strength-microamp = <4000>;
 							bias-disable;
 						};
 					};
@@ -275,6 +276,7 @@
 								 "eth_txd2_rgmii",
 								 "eth_txd3_rgmii";
 							function = "eth";
+							drive-strength-microamp = <4000>;
 							bias-disable;
 						};
 					};
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 3/3] arm64: dts: meson: g12a: Add hwrng node

[Neil Armstrong]

The Amlogic G12A has the hwrng module in an unknown "EFUSE" bus.

The hwrng is not enabled on the vendor G12A DTs, but is enabled on
next generation SM1 SoC family sharing the exact same memory mapping.

Let's add the "EFUSE" bus and the hwrng node.

This hwrng has been checked with the rng-tools rngtest FIPS tool :
rngtest: starting FIPS tests...
rngtest: bits received from input: 1630240032
rngtest: FIPS 140-2 successes: 81436
rngtest: FIPS 140-2 failures: 76
rngtest: FIPS 140-2(2001-10-10) Monobit: 10
rngtest: FIPS 140-2(2001-10-10) Poker: 6
rngtest: FIPS 140-2(2001-10-10) Runs: 26
rngtest: FIPS 140-2(2001-10-10) Long run: 34
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=3.784; avg=5687.521; max=19073.486)Mibits/s
rngtest: FIPS tests speed: (min=47.684; avg=52.348; max=52.835)Mibits/s
rngtest: Program run time: 30000987 microseconds

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 8fcdd12f684a..19ef6a467d63 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -197,6 +197,19 @@
 				};
 			};
 
+			apb_efuse: bus@30000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x30000 0x0 0x1000>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x30000 0x0 0x1000>;
+
+				hwrng: rng {
+					compatible = "amlogic,meson-rng";
+					reg = <0x0 0x218 0x0 0x4>;
+				};
+			};
+
 			periphs: bus@34400 {
 				compatible = "simple-bus";
 				reg = <0x0 0x34400 0x0 0x400>;
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 3/3] arm64: dts: meson: g12a: Add hwrng node

[Martin Blumenstingl]

Hi Neil,

On Mon, May 20, 2019 at 3:49 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> The Amlogic G12A has the hwrng module in an unknown "EFUSE" bus.
>
> The hwrng is not enabled on the vendor G12A DTs, but is enabled on
> next generation SM1 SoC family sharing the exact same memory mapping.
>
> Let's add the "EFUSE" bus and the hwrng node.
>
> This hwrng has been checked with the rng-tools rngtest FIPS tool :
> rngtest: starting FIPS tests...
> rngtest: bits received from input: 1630240032
> rngtest: FIPS 140-2 successes: 81436
> rngtest: FIPS 140-2 failures: 76
> rngtest: FIPS 140-2(2001-10-10) Monobit: 10
> rngtest: FIPS 140-2(2001-10-10) Poker: 6
> rngtest: FIPS 140-2(2001-10-10) Runs: 26
> rngtest: FIPS 140-2(2001-10-10) Long run: 34
> rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
> rngtest: input channel speed: (min=3.784; avg=5687.521; max=19073.486)Mibits/s
> rngtest: FIPS tests speed: (min=47.684; avg=52.348; max=52.835)Mibits/s
> rngtest: Program run time: 30000987 microseconds
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> index 8fcdd12f684a..19ef6a467d63 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> @@ -197,6 +197,19 @@
>                                 };
>                         };
>
> +                       apb_efuse: bus@30000 {
> +                               compatible = "simple-bus";
> +                               reg = <0x0 0x30000 0x0 0x1000>;
the public S922X datasheet lists the range as FF630000 - FF631FFF
that translates to a size of 0x2000, which the vendor kernel
(kernel/aml-4.9/arch/arm64/boot/dts/amlogic/mesong12a.dtsi from
buildroot-openlinux-A113-201901) seems to use as well:
  io_efuse_base{
    reg = <0x0 0xff630000 0x0 0x2000>;
  };

where did you take the size from?

> +                               #address-cells = <2>;
> +                               #size-cells = <2>;
> +                               ranges = <0x0 0x0 0x0 0x30000 0x0 0x1000>;
(see reg property above)

> +
> +                               hwrng: rng {
this should be rng@218


Martin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 1/3] arm64: dts: meson: g12a: add drive-strength hdmi ddc pins

[Martin Blumenstingl]

On Mon, May 20, 2019 at 3:48 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> With the default boot settings, the DDC drive strength is too weak,
> set the driver-strengh to 4mA to avoid errors on the DDC line.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Amlogic's vendor kernel (from buildroot-openlinux-A113-201901) does the same so:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 2/3] arm64: dts: meson: g12a: add drive strength for eth pins

[Martin Blumenstingl]

On Mon, May 20, 2019 at 3:48 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> With the X96 Max board using an external Gigabit Ethernet PHY,
> add the same driver strength to the Ethernet pins as the vendor
> tree.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Amlogic's vendor kernel (from buildroot-openlinux-A113-201901) does the same so:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 3/3] arm64: dts: meson: g12a: Add hwrng node

[Neil Armstrong]

On 20/05/2019 19:45, Martin Blumenstingl wrote:
> Hi Neil,
> 
> On Mon, May 20, 2019 at 3:49 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> The Amlogic G12A has the hwrng module in an unknown "EFUSE" bus.
>>
>> The hwrng is not enabled on the vendor G12A DTs, but is enabled on
>> next generation SM1 SoC family sharing the exact same memory mapping.
>>
>> Let's add the "EFUSE" bus and the hwrng node.
>>
>> This hwrng has been checked with the rng-tools rngtest FIPS tool :
>> rngtest: starting FIPS tests...
>> rngtest: bits received from input: 1630240032
>> rngtest: FIPS 140-2 successes: 81436
>> rngtest: FIPS 140-2 failures: 76
>> rngtest: FIPS 140-2(2001-10-10) Monobit: 10
>> rngtest: FIPS 140-2(2001-10-10) Poker: 6
>> rngtest: FIPS 140-2(2001-10-10) Runs: 26
>> rngtest: FIPS 140-2(2001-10-10) Long run: 34
>> rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
>> rngtest: input channel speed: (min=3.784; avg=5687.521; max=19073.486)Mibits/s
>> rngtest: FIPS tests speed: (min=47.684; avg=52.348; max=52.835)Mibits/s
>> rngtest: Program run time: 30000987 microseconds
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> index 8fcdd12f684a..19ef6a467d63 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> @@ -197,6 +197,19 @@
>>                                 };
>>                         };
>>
>> +                       apb_efuse: bus@30000 {
>> +                               compatible = "simple-bus";
>> +                               reg = <0x0 0x30000 0x0 0x1000>;
> the public S922X datasheet lists the range as FF630000 - FF631FFF
> that translates to a size of 0x2000, which the vendor kernel
> (kernel/aml-4.9/arch/arm64/boot/dts/amlogic/mesong12a.dtsi from
> buildroot-openlinux-A113-201901) seems to use as well:
>   io_efuse_base{
>     reg = <0x0 0xff630000 0x0 0x2000>;
>   };
> 
> where did you take the size from?

Another typo, it's 0x2000.

> 
>> +                               #address-cells = <2>;
>> +                               #size-cells = <2>;
>> +                               ranges = <0x0 0x0 0x0 0x30000 0x0 0x1000>;
> (see reg property above)
> 
>> +
>> +                               hwrng: rng {
> this should be rng@218

Exact.

> 
> 
> Martin
> 

Neil

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 1/3] arm64: dts: meson: g12a: add drive-strength hdmi ddc pins

[Kevin Hilman]

Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:

> On Mon, May 20, 2019 at 3:48 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> With the default boot settings, the DDC drive strength is too weak,
>> set the driver-strengh to 4mA to avoid errors on the DDC line.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> Amlogic's vendor kernel (from buildroot-openlinux-A113-201901) does the same so:
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Queued for v5.3,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 2/3] arm64: dts: meson: g12a: add drive strength for eth pins

[Kevin Hilman]

Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:

> On Mon, May 20, 2019 at 3:48 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> With the X96 Max board using an external Gigabit Ethernet PHY,
>> add the same driver strength to the Ethernet pins as the vendor
>> tree.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> Amlogic's vendor kernel (from buildroot-openlinux-A113-201901) does the same so:
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Queued for v5.3,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 3/3] arm64: dts: meson: g12a: Add hwrng node

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> On 20/05/2019 19:45, Martin Blumenstingl wrote:
>> Hi Neil,
>> 
>> On Mon, May 20, 2019 at 3:49 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>
>>> The Amlogic G12A has the hwrng module in an unknown "EFUSE" bus.
>>>
>>> The hwrng is not enabled on the vendor G12A DTs, but is enabled on
>>> next generation SM1 SoC family sharing the exact same memory mapping.
>>>
>>> Let's add the "EFUSE" bus and the hwrng node.
>>>
>>> This hwrng has been checked with the rng-tools rngtest FIPS tool :
>>> rngtest: starting FIPS tests...
>>> rngtest: bits received from input: 1630240032
>>> rngtest: FIPS 140-2 successes: 81436
>>> rngtest: FIPS 140-2 failures: 76
>>> rngtest: FIPS 140-2(2001-10-10) Monobit: 10
>>> rngtest: FIPS 140-2(2001-10-10) Poker: 6
>>> rngtest: FIPS 140-2(2001-10-10) Runs: 26
>>> rngtest: FIPS 140-2(2001-10-10) Long run: 34
>>> rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
>>> rngtest: input channel speed: (min=3.784; avg=5687.521; max=19073.486)Mibits/s
>>> rngtest: FIPS tests speed: (min=47.684; avg=52.348; max=52.835)Mibits/s
>>> rngtest: Program run time: 30000987 microseconds
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>> ---
>>>  arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 13 +++++++++++++
>>>  1 file changed, 13 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>>> index 8fcdd12f684a..19ef6a467d63 100644
>>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>>> @@ -197,6 +197,19 @@
>>>                                 };
>>>                         };
>>>
>>> +                       apb_efuse: bus@30000 {
>>> +                               compatible = "simple-bus";
>>> +                               reg = <0x0 0x30000 0x0 0x1000>;
>> the public S922X datasheet lists the range as FF630000 - FF631FFF
>> that translates to a size of 0x2000, which the vendor kernel
>> (kernel/aml-4.9/arch/arm64/boot/dts/amlogic/mesong12a.dtsi from
>> buildroot-openlinux-A113-201901) seems to use as well:
>>   io_efuse_base{
>>     reg = <0x0 0xff630000 0x0 0x2000>;
>>   };
>> 
>> where did you take the size from?
>
> Another typo, it's 0x2000.
>
>> 
>>> +                               #address-cells = <2>;
>>> +                               #size-cells = <2>;
>>> +                               ranges = <0x0 0x0 0x0 0x30000 0x0 0x1000>;
>> (see reg property above)
>> 
>>> +
>>> +                               hwrng: rng {
>> this should be rng@218
>
> Exact.
>

Will wait for v2 on this one,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic