* [PATCH v3 1/3] dt-bindings: display: amlogic, meson-dw-hdmi: convert to yaml
2019-08-08 8:55 [PATCH v3 0/3] drm/meson: convert bindings to YAML schemas Neil Armstrong
@ 2019-08-08 8:55 ` Neil Armstrong
2019-08-08 8:55 ` [PATCH v3 2/3] dt-bindings: display: amlogic, meson-vpu: " Neil Armstrong
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Neil Armstrong @ 2019-08-08 8:55 UTC (permalink / raw)
To: robh+dt
Cc: Rob Herring, devicetree, Neil Armstrong, linux-kernel, dri-devel,
linux-amlogic
Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic Synopsys DW-HDMI specifics over to YAML schemas.
The original example and usage of clock-names uses a reversed "isfr"
and "iahb" clock-names, the rewritten YAML bindings uses the reversed
instead of fixing the device trees order.
The #sound-dai-cells optional property has been added to match this node
as a sound dai.
The port connection table has been dropped in favor of a description
of each port.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../display/amlogic,meson-dw-hdmi.txt | 119 --------------
.../display/amlogic,meson-dw-hdmi.yaml | 150 ++++++++++++++++++
2 files changed, 150 insertions(+), 119 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
deleted file mode 100644
index 3a50a7862cf3..000000000000
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-Amlogic specific extensions to the Synopsys Designware HDMI Controller
-======================================================================
-
-The Amlogic Meson Synopsys Designware Integration is composed of :
-- A Synopsys DesignWare HDMI Controller IP
-- A TOP control block controlling the Clocks and PHY
-- A custom HDMI PHY in order to convert video to TMDS signal
- ___________________________________
-| HDMI TOP |<= HPD
-|___________________________________|
-| | |
-| Synopsys HDMI | HDMI PHY |=> TMDS
-| Controller |________________|
-|___________________________________|<=> DDC
-
-The HDMI TOP block only supports HPD sensing.
-The Synopsys HDMI Controller interrupt is routed through the
-TOP Block interrupt.
-Communication to the TOP Block and the Synopsys HDMI Controller is done
-via a pair of dedicated addr+read/write registers.
-The HDMI PHY is configured by registers in the HHI register block.
-
-Pixel data arrives in 4:4:4 format from the VENC block and the VPU HDMI mux
-selects either the ENCI encoder for the 576i or 480i formats or the ENCP
-encoder for all the other formats including interlaced HD formats.
-
-The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate
-DVI timings for the HDMI controller.
-
-Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare
-HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF
-audio source interfaces.
-
-Required properties:
-- compatible: value should be different for each SoC family as :
- - GXBB (S905) : "amlogic,meson-gxbb-dw-hdmi"
- - GXL (S905X, S905D) : "amlogic,meson-gxl-dw-hdmi"
- - GXM (S912) : "amlogic,meson-gxm-dw-hdmi"
- followed by the common "amlogic,meson-gx-dw-hdmi"
- - G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-dw-hdmi"
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The HDMI interrupt number
-- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
- and the Amlogic Meson venci clocks as described in
- Documentation/devicetree/bindings/clock/clock-bindings.txt,
- the clocks are soc specific, the clock-names should be "iahb", "isfr", "venci"
-- resets, resets-names: must have the phandles to the HDMI apb, glue and phy
- resets as described in :
- Documentation/devicetree/bindings/reset/reset.txt,
- the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy"
-
-Optional properties:
-- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI
- logic, as described in the file ../regulator/regulator.txt
-
-Required nodes:
-
-The connections to the HDMI ports are modeled using the OF graph
-bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-The following table lists for each supported model the port number
-corresponding to each HDMI output and input.
-
- Port 0 Port 1
------------------------------------------
- S905 (GXBB) VENC Input TMDS Output
- S905X (GXL) VENC Input TMDS Output
- S905D (GXL) VENC Input TMDS Output
- S912 (GXM) VENC Input TMDS Output
- S905X2 (G12A) VENC Input TMDS Output
- S905Y2 (G12A) VENC Input TMDS Output
- S905D2 (G12A) VENC Input TMDS Output
-
-Example:
-
-hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
-};
-
-hdmi_tx: hdmi-tx@c883a000 {
- compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
- reg = <0x0 0xc883a000 0x0 0x1c>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
- resets = <&reset RESET_HDMITX_CAPB3>,
- <&reset RESET_HDMI_SYSTEM_RESET>,
- <&reset RESET_HDMI_TX>;
- reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
- <&clkc CLKID_GCLK_VENCI_INT0>;
- clock-names = "isfr", "iahb", "venci";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* VPU VENC Input */
- hdmi_tx_venc_port: port@0 {
- reg = <0>;
-
- hdmi_tx_in: endpoint {
- remote-endpoint = <&hdmi_tx_out>;
- };
- };
-
- /* TMDS Output */
- hdmi_tx_tmds_port: port@1 {
- reg = <1>;
-
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
new file mode 100644
index 000000000000..fb747682006d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |
+ The Amlogic Meson Synopsys Designware Integration is composed of
+ - A Synopsys DesignWare HDMI Controller IP
+ - A TOP control block controlling the Clocks and PHY
+ - A custom HDMI PHY in order to convert video to TMDS signal
+ ___________________________________
+ | HDMI TOP |<= HPD
+ |___________________________________|
+ | | |
+ | Synopsys HDMI | HDMI PHY |=> TMDS
+ | Controller |________________|
+ |___________________________________|<=> DDC
+
+ The HDMI TOP block only supports HPD sensing.
+ The Synopsys HDMI Controller interrupt is routed through the
+ TOP Block interrupt.
+ Communication to the TOP Block and the Synopsys HDMI Controller is done
+ via a pair of dedicated addr+read/write registers.
+ The HDMI PHY is configured by registers in the HHI register block.
+
+ Pixel data arrives in "4:4:4" format from the VENC block and the VPU HDMI mux
+ selects either the ENCI encoder for the 576i or 480i formats or the ENCP
+ encoder for all the other formats including interlaced HD formats.
+
+ The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate
+ DVI timings for the HDMI controller.
+
+ Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare
+ HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF
+ audio source interfaces.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,meson-gxbb-dw-hdmi # GXBB (S905)
+ - amlogic,meson-gxl-dw-hdmi # GXL (S905X, S905D)
+ - amlogic,meson-gxm-dw-hdmi # GXM (S912)
+ - const: amlogic,meson-gx-dw-hdmi
+ - enum:
+ - amlogic,meson-g12a-dw-hdmi # G12A (S905X2, S905Y2, S905D2)
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+
+ clock-names:
+ items:
+ - const: isfr
+ - const: iahb
+ - const: venci
+
+ resets:
+ minItems: 3
+
+ reset-names:
+ items:
+ - const: hdmitx_apb
+ - const: hdmitx
+ - const: hdmitx_phy
+
+ hdmi-supply:
+ description: phandle to an external 5V regulator to power the HDMI logic
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+
+ port@0:
+ type: object
+ description:
+ A port node pointing to the VENC Input port node.
+
+ port@1:
+ type: object
+ description:
+ A port node pointing to the TMDS Output port node.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - port@0
+ - port@1
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ hdmi_tx: hdmi-tx@c883a000 {
+ compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ reg = <0xc883a000 0x1c>;
+ interrupts = <57>;
+ resets = <&reset_apb>, <&reset_hdmitx>, <&reset_hdmitx_phy>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clk_isfr>, <&clk_iahb>, <&clk_venci>;
+ clock-names = "isfr", "iahb", "venci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VPU VENC Input */
+ hdmi_tx_venc_port: port@0 {
+ reg = <0>;
+
+ hdmi_tx_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+
+ /* TMDS Output */
+ hdmi_tx_tmds_port: port@1 {
+ reg = <1>;
+
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v3 2/3] dt-bindings: display: amlogic, meson-vpu: convert to yaml
2019-08-08 8:55 [PATCH v3 0/3] drm/meson: convert bindings to YAML schemas Neil Armstrong
2019-08-08 8:55 ` [PATCH v3 1/3] dt-bindings: display: amlogic, meson-dw-hdmi: convert to yaml Neil Armstrong
@ 2019-08-08 8:55 ` Neil Armstrong
2019-08-08 14:22 ` [PATCH v3 2/3] dt-bindings: display: amlogic,meson-vpu: " Rob Herring
2019-08-08 8:55 ` [PATCH v3 3/3] MAINTAINERS: Update with Amlogic DRM bindings converted as YAML Neil Armstrong
2019-08-14 9:54 ` [PATCH v3 0/3] drm/meson: convert bindings to YAML schemas Neil Armstrong
3 siblings, 1 reply; 7+ messages in thread
From: Neil Armstrong @ 2019-08-08 8:55 UTC (permalink / raw)
To: robh+dt
Cc: devicetree, linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic Display Controller over to YAML schemas.
The original example has a leftover "dmc" memory cell, that has been
removed in the yaml rewrite.
The port connection table has been dropped in favor of a description
of each port.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../bindings/display/amlogic,meson-vpu.txt | 121 ----------------
.../bindings/display/amlogic,meson-vpu.yaml | 137 ++++++++++++++++++
2 files changed, 137 insertions(+), 121 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
deleted file mode 100644
index be40a780501c..000000000000
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-Amlogic Meson Display Controller
-================================
-
-The Amlogic Meson Display controller is composed of several components
-that are going to be documented below:
-
-DMC|---------------VPU (Video Processing Unit)----------------|------HHI------|
- | vd1 _______ _____________ _________________ | |
-D |-------| |----| | | | | HDMI PLL |
-D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK |
-R |-------| |----| Processing | | | | |
- | osd2 | | | |---| Enci ----------|----|-----VDAC------|
-R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----|
-A | osd1 | | | Blenders | | Encl ----------|----|---------------|
-M |-------|______|----|____________| |________________| | |
-___|__________________________________________________________|_______________|
-
-
-VIU: Video Input Unit
----------------------
-
-The Video Input Unit is in charge of the pixel scanout from the DDR memory.
-It fetches the frames addresses, stride and parameters from the "Canvas" memory.
-This part is also in charge of the CSC (Colorspace Conversion).
-It can handle 2 OSD Planes and 2 Video Planes.
-
-VPP: Video Post Processing
---------------------------
-
-The Video Post Processing is in charge of the scaling and blending of the
-various planes into a single pixel stream.
-There is a special "pre-blending" used by the video planes with a dedicated
-scaler and a "post-blending" to merge with the OSD Planes.
-The OSD planes also have a dedicated scaler for one of the OSD.
-
-VENC: Video Encoders
---------------------
-
-The VENC is composed of the multiple pixel encoders :
- - ENCI : Interlace Video encoder for CVBS and Interlace HDMI
- - ENCP : Progressive Video Encoder for HDMI
- - ENCL : LCD LVDS Encoder
-The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock
-tree and provides the scanout clock to the VPP and VIU.
-The ENCI is connected to a single VDAC for Composite Output.
-The ENCI and ENCP are connected to an on-chip HDMI Transceiver.
-
-Device Tree Bindings:
----------------------
-
-VPU: Video Processing Unit
---------------------------
-
-Required properties:
-- compatible: value should be different for each SoC family as :
- - GXBB (S905) : "amlogic,meson-gxbb-vpu"
- - GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
- - GXM (S912) : "amlogic,meson-gxm-vpu"
- followed by the common "amlogic,meson-gx-vpu"
- - G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-vpu"
-- reg: base address and size of he following memory-mapped regions :
- - vpu
- - hhi
-- reg-names: should contain the names of the previous memory regions
-- interrupts: should contain the VENC Vsync interrupt number
-- amlogic,canvas: phandle to canvas provider node as described in the file
- ../soc/amlogic/amlogic,canvas.txt
-
-Optional properties:
-- power-domains: Optional phandle to associated power domain as described in
- the file ../power/power_domain.txt
-
-Required nodes:
-
-The connections to the VPU output video ports are modeled using the OF graph
-bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-The following table lists for each supported model the port number
-corresponding to each VPU output.
-
- Port 0 Port 1
------------------------------------------
- S905 (GXBB) CVBS VDAC HDMI-TX
- S905X (GXL) CVBS VDAC HDMI-TX
- S905D (GXL) CVBS VDAC HDMI-TX
- S912 (GXM) CVBS VDAC HDMI-TX
- S905X2 (G12A) CVBS VDAC HDMI-TX
- S905Y2 (G12A) CVBS VDAC HDMI-TX
- S905D2 (G12A) CVBS VDAC HDMI-TX
-
-Example:
-
-tv-connector {
- compatible = "composite-video-connector";
-
- port {
- tv_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
-};
-
-vpu: vpu@d0100000 {
- compatible = "amlogic,meson-gxbb-vpu";
- reg = <0x0 0xd0100000 0x0 0x100000>,
- <0x0 0xc883c000 0x0 0x1000>,
- <0x0 0xc8838000 0x0 0x1000>;
- reg-names = "vpu", "hhi", "dmc";
- interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* CVBS VDAC output port */
- port@0 {
- reg = <0>;
-
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&tv_connector_in>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
new file mode 100644
index 000000000000..d1205a6697a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson Display Controller
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |
+ The Amlogic Meson Display controller is composed of several components
+ that are going to be documented below
+
+ DMC|---------------VPU (Video Processing Unit)----------------|------HHI------|
+ | vd1 _______ _____________ _________________ | |
+ D |-------| |----| | | | | HDMI PLL |
+ D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK |
+ R |-------| |----| Processing | | | | |
+ | osd2 | | | |---| Enci ----------|----|-----VDAC------|
+ R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----|
+ A | osd1 | | | Blenders | | Encl ----------|----|---------------|
+ M |-------|______|----|____________| |________________| | |
+ ___|__________________________________________________________|_______________|
+
+
+ VIU: Video Input Unit
+ ---------------------
+
+ The Video Input Unit is in charge of the pixel scanout from the DDR memory.
+ It fetches the frames addresses, stride and parameters from the "Canvas" memory.
+ This part is also in charge of the CSC (Colorspace Conversion).
+ It can handle 2 OSD Planes and 2 Video Planes.
+
+ VPP: Video Post Processing
+ --------------------------
+
+ The Video Post Processing is in charge of the scaling and blending of the
+ various planes into a single pixel stream.
+ There is a special "pre-blending" used by the video planes with a dedicated
+ scaler and a "post-blending" to merge with the OSD Planes.
+ The OSD planes also have a dedicated scaler for one of the OSD.
+
+ VENC: Video Encoders
+ --------------------
+
+ The VENC is composed of the multiple pixel encoders
+ - ENCI : Interlace Video encoder for CVBS and Interlace HDMI
+ - ENCP : Progressive Video Encoder for HDMI
+ - ENCL : LCD LVDS Encoder
+ The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock
+ tree and provides the scanout clock to the VPP and VIU.
+ The ENCI is connected to a single VDAC for Composite Output.
+ The ENCI and ENCP are connected to an on-chip HDMI Transceiver.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,meson-gxbb-vpu # GXBB (S905)
+ - amlogic,meson-gxl-vpu # GXL (S905X, S905D)
+ - amlogic,meson-gxm-vpu # GXM (S912)
+ - const: amlogic,meson-gx-vpu
+ - enum:
+ - amlogic,meson-g12a-vpu # G12A (S905X2, S905Y2, S905D2)
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: vpu
+ - const: hhi
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+ description: phandle to the associated power domain
+
+ port@0:
+ type: object
+ description:
+ A port node pointing to the CVBS VDAC port node.
+
+ port@1:
+ type: object
+ description:
+ A port node pointing to the HDMI-TX port node.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - port@0
+ - port@1
+ - "#address-cells"
+ - "#size-cells"
+
+examples:
+ - |
+ vpu: vpu@d0100000 {
+ compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+ reg = <0xd0100000 0x100000>, <0xc883c000 0x1000>;
+ reg-names = "vpu", "hhi";
+ interrupts = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* CVBS VDAC output port */
+ port@0 {
+ reg = <0>;
+
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ };
+ };
+
+ /* HDMI TX output port */
+ port@1 {
+ reg = <1>;
+
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_tx_in>;
+ };
+ };
+ };
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v3 2/3] dt-bindings: display: amlogic,meson-vpu: convert to yaml
2019-08-08 8:55 ` [PATCH v3 2/3] dt-bindings: display: amlogic, meson-vpu: " Neil Armstrong
@ 2019-08-08 14:22 ` Rob Herring
0 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2019-08-08 14:22 UTC (permalink / raw)
To: Neil Armstrong; +Cc: devicetree, linux-kernel, dri-devel, linux-amlogic
On Thu, Aug 8, 2019 at 2:55 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Now that we have the DT validation in place, let's convert the device tree
> bindings for the Amlogic Display Controller over to YAML schemas.
>
> The original example has a leftover "dmc" memory cell, that has been
> removed in the yaml rewrite.
>
> The port connection table has been dropped in favor of a description
> of each port.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> .../bindings/display/amlogic,meson-vpu.txt | 121 ----------------
> .../bindings/display/amlogic,meson-vpu.yaml | 137 ++++++++++++++++++
> 2 files changed, 137 insertions(+), 121 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
> create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v3 3/3] MAINTAINERS: Update with Amlogic DRM bindings converted as YAML
2019-08-08 8:55 [PATCH v3 0/3] drm/meson: convert bindings to YAML schemas Neil Armstrong
2019-08-08 8:55 ` [PATCH v3 1/3] dt-bindings: display: amlogic, meson-dw-hdmi: convert to yaml Neil Armstrong
2019-08-08 8:55 ` [PATCH v3 2/3] dt-bindings: display: amlogic, meson-vpu: " Neil Armstrong
@ 2019-08-08 8:55 ` Neil Armstrong
2019-08-12 16:31 ` Maxime Jourdan
2019-08-14 9:54 ` [PATCH v3 0/3] drm/meson: convert bindings to YAML schemas Neil Armstrong
3 siblings, 1 reply; 7+ messages in thread
From: Neil Armstrong @ 2019-08-08 8:55 UTC (permalink / raw)
To: robh+dt
Cc: devicetree, linux-amlogic, linux-kernel, dri-devel, Neil Armstrong
The amlogic,meson-dw-hdmi.txt and amlogic,meson-vpu.txt has been
converted to YAML schemas, update MAINTAINERS to match them again.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
MAINTAINERS | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 6426db5198f0..c55c18531cd1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5318,8 +5318,8 @@ L: linux-amlogic@lists.infradead.org
W: http://linux-meson.com/
S: Supported
F: drivers/gpu/drm/meson/
-F: Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
-F: Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
+F: Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+F: Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
F: Documentation/gpu/meson.rst
T: git git://anongit.freedesktop.org/drm/drm-misc
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v3 3/3] MAINTAINERS: Update with Amlogic DRM bindings converted as YAML
2019-08-08 8:55 ` [PATCH v3 3/3] MAINTAINERS: Update with Amlogic DRM bindings converted as YAML Neil Armstrong
@ 2019-08-12 16:31 ` Maxime Jourdan
0 siblings, 0 replies; 7+ messages in thread
From: Maxime Jourdan @ 2019-08-12 16:31 UTC (permalink / raw)
To: Neil Armstrong
Cc: devicetree, Rob Herring, Linux Kernel Mailing List, dri-devel,
linux-amlogic
On Thu, Aug 8, 2019 at 10:55 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> The amlogic,meson-dw-hdmi.txt and amlogic,meson-vpu.txt has been
> converted to YAML schemas, update MAINTAINERS to match them again.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> MAINTAINERS | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6426db5198f0..c55c18531cd1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5318,8 +5318,8 @@ L: linux-amlogic@lists.infradead.org
> W: http://linux-meson.com/
> S: Supported
> F: drivers/gpu/drm/meson/
> -F: Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
> -F: Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
> +F: Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
> +F: Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
> F: Documentation/gpu/meson.rst
> T: git git://anongit.freedesktop.org/drm/drm-misc
>
> --
> 2.22.0
>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3 0/3] drm/meson: convert bindings to YAML schemas
2019-08-08 8:55 [PATCH v3 0/3] drm/meson: convert bindings to YAML schemas Neil Armstrong
` (2 preceding siblings ...)
2019-08-08 8:55 ` [PATCH v3 3/3] MAINTAINERS: Update with Amlogic DRM bindings converted as YAML Neil Armstrong
@ 2019-08-14 9:54 ` Neil Armstrong
3 siblings, 0 replies; 7+ messages in thread
From: Neil Armstrong @ 2019-08-14 9:54 UTC (permalink / raw)
To: robh+dt; +Cc: devicetree, linux-kernel, dri-devel, linux-amlogic
On 08/08/2019 10:55, Neil Armstrong wrote:
> This patchset converts the existing text bindings to YAML schemas.
>
> Those bindings have a lot of texts, thus is interesting to convert.
>
> All have been tested using :
> $ make ARCH=arm64 dtbs_check
>
> Issues with the amlogic arm64 DTs has already been identified thanks
> to the validation scripts. The DT fixes will be pushed once these yaml
> bindings are acked.
>
> Changes since v2:
> - Added review tag on amlogic,meson-dw-hdmi.yaml
> - Removed power-domains type from amlogic,meson-vpu.yaml
>
> Neil Armstrong (3):
> dt-bindings: display: amlogic,meson-dw-hdmi: convert to yaml
> dt-bindings: display: amlogic,meson-vpu: convert to yaml
> MAINTAINERS: Update with Amlogic DRM bindings converted as YAML
>
> .../display/amlogic,meson-dw-hdmi.txt | 119 --------------
> .../display/amlogic,meson-dw-hdmi.yaml | 150 ++++++++++++++++++
> .../bindings/display/amlogic,meson-vpu.txt | 121 --------------
> .../bindings/display/amlogic,meson-vpu.yaml | 137 ++++++++++++++++
> MAINTAINERS | 4 +-
> 5 files changed, 289 insertions(+), 242 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
> create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
> delete mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
> create mode 100644 Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
>
Applied to drm-misc-next
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 7+ messages in thread