* [RFC v2 PATCH 0/4] add support for videostrong KII Pro
@ 2019-11-17 17:56 Mohammad Rasim
2019-11-17 17:56 ` [RFC PATCH 1/4] dt-bindings: Add vendor prefix for Videostrong Technology Co., Ltd Mohammad Rasim
` (3 more replies)
0 siblings, 4 replies; 12+ messages in thread
From: Mohammad Rasim @ 2019-11-17 17:56 UTC (permalink / raw)
To: linux-amlogic
Cc: Martin Blumenstingl, Kevin Hilman, Mohammad Rasim, Neil Armstrong
This patch set adds support for the Videostrong KII Pro tv box which is based on the gxbb-p201 reference design.
Patch 1 and 4 also adds support for the BCM4335A0 that comes with this device
Device specifications:
SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz
System Memory – 2GB DDR3
Storage – 16GB eMMC flash + micro SD card slot up to 32GB
Video Output – HDMI 2.0 up to 4K @ 60Hz, and 3.5mm AV (composite video) jack
Audio – HDMI, AV (stereo audio), optical S/PDIF
Video Codecs – 10-bit H.265 up to 4K60, MPEG/VC-1/AVS+/H.265 up to 4K30
Tuner – Combo DVB-T/T2 and DVB-S/S2 with two connectors
Connectivity – 10/100M Ethernet, 802.11 b/g/n/ac Wi-Fi, and Bluetooth 4.0 (Ampak AP6335)
USB – 4x USB 2.0 host ports
Misc – Power button and LED, IR receiver
Power Supply – DC 12V/1A
Dimensions – 130 x 120 x 32 mm
Weight – 187.50 grams
Changes since RFC v1:
- add commit description to the cover letter
- update bluetooth bindings
- use lowercase name for the dts filename,vendor prefix and device compatible
- add copyrights to the new files
- include "meson-gxbb-p20x.dtsi" instead of "meson-gxbb-p201.dts"
Mohammad Rasim (4):
dt-bindings: Add vendor prefix for Videostrong Technology Co., Ltd.
dt-bindings: net: Add compatible for BCM4335A0 bluetooth module
arm64: dts: meson-gxbb: add support for Videostrong KII Pro
Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth
.../bindings/net/broadcom-bluetooth.txt | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-gxbb-kii-pro.dts | 39 +++++++++++++++++++
drivers/bluetooth/btbcm.c | 1 +
drivers/bluetooth/hci_bcm.c | 1 +
6 files changed, 45 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
--
2.23.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 12+ messages in thread
* [RFC PATCH 1/4] dt-bindings: Add vendor prefix for Videostrong Technology Co., Ltd.
2019-11-17 17:56 [RFC v2 PATCH 0/4] add support for videostrong KII Pro Mohammad Rasim
@ 2019-11-17 17:56 ` Mohammad Rasim
2019-11-18 10:03 ` Neil Armstrong
2019-11-17 17:56 ` [RFC PATCH 2/4] dt-bindings: net: Add compatible for BCM4335A0 bluetooth module Mohammad Rasim
` (2 subsequent siblings)
3 siblings, 1 reply; 12+ messages in thread
From: Mohammad Rasim @ 2019-11-17 17:56 UTC (permalink / raw)
To: linux-amlogic, devicetree, Rob Herring, Mark Rutland
Cc: Martin Blumenstingl, Kevin Hilman, Mohammad Rasim, Neil Armstrong
Videostrong Technology Co., Ltd., A manufacturer of Android Players & STB( Android with DVB Hybrid box &DVB-T2/S2/C/ISDB-T/DTMB-TH/ATSC,,)as well as HD media players.
Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 967e78c5ec0a..e4bd0a9fd4e5 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1006,6 +1006,8 @@ patternProperties:
description: Variscite Ltd.
"^via,.*":
description: VIA Technologies, Inc.
+ "^videostrong,.*":
+ description: Videostrong Technology Co., Ltd.
"^virtio,.*":
description: Virtual I/O Device Specification, developed by the OASIS consortium
"^vishay,.*":
--
2.23.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RFC PATCH 2/4] dt-bindings: net: Add compatible for BCM4335A0 bluetooth module
2019-11-17 17:56 [RFC v2 PATCH 0/4] add support for videostrong KII Pro Mohammad Rasim
2019-11-17 17:56 ` [RFC PATCH 1/4] dt-bindings: Add vendor prefix for Videostrong Technology Co., Ltd Mohammad Rasim
@ 2019-11-17 17:56 ` Mohammad Rasim
2019-11-18 10:03 ` Neil Armstrong
2019-11-17 17:56 ` [RFC PATCH 3/4] arm64: dts: meson-gxbb: add support for Videostrong KII Pro Mohammad Rasim
2019-11-17 17:56 ` [RFC PATCH 4/4] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth Mohammad Rasim
3 siblings, 1 reply; 12+ messages in thread
From: Mohammad Rasim @ 2019-11-17 17:56 UTC (permalink / raw)
To: linux-amlogic, devicetree, Rob Herring, Marcel Holtmann
Cc: Martin Blumenstingl, Kevin Hilman, Mohammad Rasim, Neil Armstrong
Available in the Ampak AP6335 WiFi/Bluetooth combo
Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
---
Documentation/devicetree/bindings/net/broadcom-bluetooth.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
index 4fa00e2eafcf..0717399191a2 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
@@ -14,6 +14,7 @@ Required properties:
* "brcm,bcm4330-bt"
* "brcm,bcm43438-bt"
* "brcm,bcm4345c5"
+ * "brcm,bcm4335a0"
Optional properties:
--
2.23.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RFC PATCH 3/4] arm64: dts: meson-gxbb: add support for Videostrong KII Pro
2019-11-17 17:56 [RFC v2 PATCH 0/4] add support for videostrong KII Pro Mohammad Rasim
2019-11-17 17:56 ` [RFC PATCH 1/4] dt-bindings: Add vendor prefix for Videostrong Technology Co., Ltd Mohammad Rasim
2019-11-17 17:56 ` [RFC PATCH 2/4] dt-bindings: net: Add compatible for BCM4335A0 bluetooth module Mohammad Rasim
@ 2019-11-17 17:56 ` Mohammad Rasim
2019-11-18 10:26 ` Neil Armstrong
2019-11-17 17:56 ` [RFC PATCH 4/4] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth Mohammad Rasim
3 siblings, 1 reply; 12+ messages in thread
From: Mohammad Rasim @ 2019-11-17 17:56 UTC (permalink / raw)
To: linux-amlogic, Rob Herring, devicetree
Cc: Martin Blumenstingl, Kevin Hilman, Mohammad Rasim, Neil Armstrong
This patch adds support for the Videostrong KII Pro tv box which is based on the gxbb-p201 reference design
Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-gxbb-kii-pro.dts | 39 +++++++++++++++++++
2 files changed, 40 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 84afecba9ec0..a795a170dcab 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
new file mode 100644
index 000000000000..b63dabb7bf97
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+/* Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com>
+*/
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+ compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb";
+ model = "Videostrong KII Pro";
+
+
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm4335a0";
+ };
+};
+
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_rmii_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0>, <10000>, <1000000>;
+ snps,reset-active-low;
+};
+
+
--
2.23.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RFC PATCH 4/4] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth
2019-11-17 17:56 [RFC v2 PATCH 0/4] add support for videostrong KII Pro Mohammad Rasim
` (2 preceding siblings ...)
2019-11-17 17:56 ` [RFC PATCH 3/4] arm64: dts: meson-gxbb: add support for Videostrong KII Pro Mohammad Rasim
@ 2019-11-17 17:56 ` Mohammad Rasim
2019-11-18 10:04 ` Neil Armstrong
3 siblings, 1 reply; 12+ messages in thread
From: Mohammad Rasim @ 2019-11-17 17:56 UTC (permalink / raw)
To: linux-amlogic, linux-bluetooth, Johan Hedberg, Marcel Holtmann
Cc: Martin Blumenstingl, Kevin Hilman, Mohammad Rasim, Neil Armstrong
This patch adds the device ID for the BCM4335A0 module (part of the AMPAK AP6335 WIFI/Bluetooth combo)
hciconfig output:
```
hci1: Type: Primary Bus: UART
BD Address: 43:35:B0:07:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:5079 acl:0 sco:0 events:567 errors:0
TX bytes:69065 acl:0 sco:0 commands:567 errors:0
Features: 0xbf 0xfe 0xcf 0xff 0xdf 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH SNIFF
Link mode: SLAVE ACCEPT
Name: 'alarm'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Version: 4.0 (0x6) Revision: 0x161
LMP Version: 4.0 (0x6) Subversion: 0x4106
Manufacturer: Broadcom Corporation (15)
```
Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
---
drivers/bluetooth/btbcm.c | 1 +
drivers/bluetooth/hci_bcm.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 2d2e6d862068..22464bf8cda3 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -339,6 +339,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
{ 0x220e, "BCM20702A1" }, /* 001.002.014 */
{ 0x4217, "BCM4329B1" }, /* 002.002.023 */
{ 0x6106, "BCM4359C0" }, /* 003.001.006 */
+ { 0x4106, "BCM4335A0" }, /* 002.001.006 */
{ }
};
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 7646636f2d18..7eba10b0ae6c 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1422,6 +1422,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = {
{ .compatible = "brcm,bcm4345c5" },
{ .compatible = "brcm,bcm4330-bt" },
{ .compatible = "brcm,bcm43438-bt" },
+ { .compatible = "brcm,bcm4335a0" },
{ },
};
MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match);
--
2.23.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 2/4] dt-bindings: net: Add compatible for BCM4335A0 bluetooth module
2019-11-17 17:56 ` [RFC PATCH 2/4] dt-bindings: net: Add compatible for BCM4335A0 bluetooth module Mohammad Rasim
@ 2019-11-18 10:03 ` Neil Armstrong
2019-11-18 17:53 ` Mohammad Rasim
0 siblings, 1 reply; 12+ messages in thread
From: Neil Armstrong @ 2019-11-18 10:03 UTC (permalink / raw)
To: Mohammad Rasim, linux-amlogic, devicetree, Rob Herring, Marcel Holtmann
Cc: Martin Blumenstingl, Kevin Hilman
Hi,
On 17/11/2019 18:56, Mohammad Rasim wrote:
>
> Available in the Ampak AP6335 WiFi/Bluetooth combo
>
> Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
> ---
> Documentation/devicetree/bindings/net/broadcom-bluetooth.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> index 4fa00e2eafcf..0717399191a2 100644
> --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> @@ -14,6 +14,7 @@ Required properties:
> * "brcm,bcm4330-bt"
> * "brcm,bcm43438-bt"
> * "brcm,bcm4345c5"
> + * "brcm,bcm4335a0"
Is there a specific reason to add a new compatible here ? it the BT interface of the BCM4335A0 different for the actual compatible modules ?
If not, simply use a common "brcm,bcm43438-bt" compatible string.
Neil
>
> Optional properties:
>
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 1/4] dt-bindings: Add vendor prefix for Videostrong Technology Co., Ltd.
2019-11-17 17:56 ` [RFC PATCH 1/4] dt-bindings: Add vendor prefix for Videostrong Technology Co., Ltd Mohammad Rasim
@ 2019-11-18 10:03 ` Neil Armstrong
0 siblings, 0 replies; 12+ messages in thread
From: Neil Armstrong @ 2019-11-18 10:03 UTC (permalink / raw)
To: Mohammad Rasim, linux-amlogic, devicetree, Rob Herring, Mark Rutland
Cc: Martin Blumenstingl, Kevin Hilman
On 17/11/2019 18:56, Mohammad Rasim wrote:
> Videostrong Technology Co., Ltd., A manufacturer of Android Players & STB( Android with DVB Hybrid box &DVB-T2/S2/C/ISDB-T/DTMB-TH/ATSC,,)as well as HD media players.
>
> Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
> ---
> Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 967e78c5ec0a..e4bd0a9fd4e5 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -1006,6 +1006,8 @@ patternProperties:
> description: Variscite Ltd.
> "^via,.*":
> description: VIA Technologies, Inc.
> + "^videostrong,.*":
> + description: Videostrong Technology Co., Ltd.
> "^virtio,.*":
> description: Virtual I/O Device Specification, developed by the OASIS consortium
> "^vishay,.*":
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 4/4] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth
2019-11-17 17:56 ` [RFC PATCH 4/4] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth Mohammad Rasim
@ 2019-11-18 10:04 ` Neil Armstrong
0 siblings, 0 replies; 12+ messages in thread
From: Neil Armstrong @ 2019-11-18 10:04 UTC (permalink / raw)
To: Mohammad Rasim, linux-amlogic, linux-bluetooth, Johan Hedberg,
Marcel Holtmann
Cc: Martin Blumenstingl, Kevin Hilman
On 17/11/2019 18:56, Mohammad Rasim wrote:
> This patch adds the device ID for the BCM4335A0 module (part of the AMPAK AP6335 WIFI/Bluetooth combo)
>
> hciconfig output:
> ```
> hci1: Type: Primary Bus: UART
> BD Address: 43:35:B0:07:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1
> UP RUNNING
> RX bytes:5079 acl:0 sco:0 events:567 errors:0
> TX bytes:69065 acl:0 sco:0 commands:567 errors:0
> Features: 0xbf 0xfe 0xcf 0xff 0xdf 0xff 0x7b 0x87
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH SNIFF
> Link mode: SLAVE ACCEPT
> Name: 'alarm'
> Class: 0x000000
> Service Classes: Unspecified
> Device Class: Miscellaneous,
> HCI Version: 4.0 (0x6) Revision: 0x161
> LMP Version: 4.0 (0x6) Subversion: 0x4106
> Manufacturer: Broadcom Corporation (15)
> ```
>
> Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
> ---
> drivers/bluetooth/btbcm.c | 1 +
> drivers/bluetooth/hci_bcm.c | 1 +
> 2 files changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
> index 2d2e6d862068..22464bf8cda3 100644
> --- a/drivers/bluetooth/btbcm.c
> +++ b/drivers/bluetooth/btbcm.c
> @@ -339,6 +339,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
> { 0x220e, "BCM20702A1" }, /* 001.002.014 */
> { 0x4217, "BCM4329B1" }, /* 002.002.023 */
> { 0x6106, "BCM4359C0" }, /* 003.001.006 */
> + { 0x4106, "BCM4335A0" }, /* 002.001.006 */
Ack for this one
> { }
> };
>
> diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
> index 7646636f2d18..7eba10b0ae6c 100644
> --- a/drivers/bluetooth/hci_bcm.c
> +++ b/drivers/bluetooth/hci_bcm.c
> @@ -1422,6 +1422,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = {
> { .compatible = "brcm,bcm4345c5" },
> { .compatible = "brcm,bcm4330-bt" },
> { .compatible = "brcm,bcm43438-bt" },
> + { .compatible = "brcm,bcm4335a0" },
This could be omitted if the I/F is the same as "brcm,bcm43438-bt".
> { },
> };
> MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match);
>
Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 3/4] arm64: dts: meson-gxbb: add support for Videostrong KII Pro
2019-11-17 17:56 ` [RFC PATCH 3/4] arm64: dts: meson-gxbb: add support for Videostrong KII Pro Mohammad Rasim
@ 2019-11-18 10:26 ` Neil Armstrong
2019-11-18 19:21 ` Mohammad Rasim
0 siblings, 1 reply; 12+ messages in thread
From: Neil Armstrong @ 2019-11-18 10:26 UTC (permalink / raw)
To: Mohammad Rasim, linux-amlogic, Rob Herring, devicetree
Cc: Martin Blumenstingl, Kevin Hilman
On 17/11/2019 18:56, Mohammad Rasim wrote:
> This patch adds support for the Videostrong KII Pro tv box which is based on the gxbb-p201 reference design
>
> Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> .../boot/dts/amlogic/meson-gxbb-kii-pro.dts | 39 +++++++++++++++++++
> 2 files changed, 40 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 84afecba9ec0..a795a170dcab 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> new file mode 100644
> index 000000000000..b63dabb7bf97
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> +/* Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com>
> +*/
> +
> +/dts-v1/;
> +
> +#include "meson-gxbb-p20x.dtsi"
> +
> +/ {
> + compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb";
> + model = "Videostrong KII Pro";
> +
> +
> +};
> +
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +
> + bluetooth {
> + compatible = "brcm,bcm4335a0";
Use "brcm,bcm43438-bt" here if the I/F is compatible.
> + };
> +};
> +
> +ðmac {
> + status = "okay";
> + pinctrl-0 = <ð_rmii_pins>;
> + pinctrl-names = "default";
> + phy-mode = "rmii";
> +
> + snps,reset-gpio = <&gpio GPIOZ_14 0>;
> + snps,reset-delays-us = <0>, <10000>, <1000000>;
> + snps,reset-active-low> +};
> +
> +
>
Did you try to determine the PHY and add a PHY node aswell ? The reset stuff could go in the PHY node.
Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 2/4] dt-bindings: net: Add compatible for BCM4335A0 bluetooth module
2019-11-18 10:03 ` Neil Armstrong
@ 2019-11-18 17:53 ` Mohammad Rasim
0 siblings, 0 replies; 12+ messages in thread
From: Mohammad Rasim @ 2019-11-18 17:53 UTC (permalink / raw)
To: Neil Armstrong
Cc: devicetree, Martin Blumenstingl, Kevin Hilman, Marcel Holtmann,
Rob Herring, linux-amlogic
On 19/11/18 11:03AM, Neil Armstrong wrote:
> Hi,
>
> On 17/11/2019 18:56, Mohammad Rasim wrote:
> >
> > Available in the Ampak AP6335 WiFi/Bluetooth combo
> >
> > Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
> > ---
> > Documentation/devicetree/bindings/net/broadcom-bluetooth.txt | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> > index 4fa00e2eafcf..0717399191a2 100644
> > --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> > +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> > @@ -14,6 +14,7 @@ Required properties:
> > * "brcm,bcm4330-bt"
> > * "brcm,bcm43438-bt"
> > * "brcm,bcm4345c5"
> > + * "brcm,bcm4335a0"
>
> Is there a specific reason to add a new compatible here ? it the BT interface of the BCM4335A0 different for the actual compatible modules ?
>
> If not, simply use a common "brcm,bcm43438-bt" compatible string.
I added a new compatible so that the dts of the device can describe the
exact model of the module, anyone reading the dts might think that the
device has a bcm43438 module which is incorrect and just looks weird to
me.
previous compatibles like 'bcm4330-bt' are only used for probing and
don't appear to be used anywhere else so I guess this is ok by the
bluetooth maintainers, if not I will use a previous compatible and add a
comment in the dts with the exact model of the chip.
Regards
>
> Neil
>
> >
> > Optional properties:
> >
> >
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 3/4] arm64: dts: meson-gxbb: add support for Videostrong KII Pro
2019-11-18 10:26 ` Neil Armstrong
@ 2019-11-18 19:21 ` Mohammad Rasim
0 siblings, 0 replies; 12+ messages in thread
From: Mohammad Rasim @ 2019-11-18 19:21 UTC (permalink / raw)
To: Neil Armstrong
Cc: Martin Blumenstingl, linux-amlogic, Rob Herring, Kevin Hilman,
devicetree
On 19/11/18 11:26AM, Neil Armstrong wrote:
> On 17/11/2019 18:56, Mohammad Rasim wrote:
> > This patch adds support for the Videostrong KII Pro tv box which is based on the gxbb-p201 reference design
> >
> > Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
> > ---
> > arch/arm64/boot/dts/amlogic/Makefile | 1 +
> > .../boot/dts/amlogic/meson-gxbb-kii-pro.dts | 39 +++++++++++++++++++
> > 2 files changed, 40 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> > index 84afecba9ec0..a795a170dcab 100644
> > --- a/arch/arm64/boot/dts/amlogic/Makefile
> > +++ b/arch/arm64/boot/dts/amlogic/Makefile
> > @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
> > dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
> > dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
> > dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
> > +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
> > dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
> > dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
> > dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> > new file mode 100644
> > index 000000000000..b63dabb7bf97
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
> > @@ -0,0 +1,39 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > +/* Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com>
> > +*/
> > +
> > +/dts-v1/;
> > +
> > +#include "meson-gxbb-p20x.dtsi"
> > +
> > +/ {
> > + compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb";
> > + model = "Videostrong KII Pro";
> > +
> > +
> > +};
> > +
> > +&uart_A {
> > + status = "okay";
> > + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> > + pinctrl-names = "default";
> > + uart-has-rtscts;
> > +
> > + bluetooth {
> > + compatible = "brcm,bcm4335a0";
>
> Use "brcm,bcm43438-bt" here if the I/F is compatible.
>
> > + };
> > +};
> > +
> > +ðmac {
> > + status = "okay";
> > + pinctrl-0 = <ð_rmii_pins>;
> > + pinctrl-names = "default";
> > + phy-mode = "rmii";
> > +
> > + snps,reset-gpio = <&gpio GPIOZ_14 0>;
> > + snps,reset-delays-us = <0>, <10000>, <1000000>;
> > + snps,reset-active-low> +};
> > +
> > +
> >
>
> Did you try to determine the PHY and add a PHY node aswell ? The reset stuff could go in the PHY node.
looking at the PCB I can see the phy is "IP101GR" so I thought I can use
the phy node of nextbox-a95x [0] but I get these errors:
```
[ 15.867041] meson8b-dwmac c9410000.ethernet eth0: no phy at addr -1
[ 15.867079] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
```
[0] https://github.com/torvalds/linux/blob/f9717178b9be9477877d4c3776c61ff56d854ddf/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts#L165-L177
>
> Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 12+ messages in thread
* [RFC PATCH 1/4] dt-bindings: Add vendor prefix for Videostrong Technology Co., Ltd.
@ 2019-11-17 17:24 Mohammad Rasim
0 siblings, 0 replies; 12+ messages in thread
From: Mohammad Rasim @ 2019-11-17 17:24 UTC (permalink / raw)
To: linux-amlogic, devicetree, Rob Herring, Mark Rutland
Cc: Martin Blumenstingl, Kevin Hilman, Mohammad Rasim, Neil Armstrong
Videostrong Technology Co., Ltd., A manufacturer of Android Players & STB( Android with DVB Hybrid box &DVB-T2/S2/C/ISDB-T/DTMB-TH/ATSC,,)as well as HD media players.
Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 967e78c5ec0a..e4bd0a9fd4e5 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1006,6 +1006,8 @@ patternProperties:
description: Variscite Ltd.
"^via,.*":
description: VIA Technologies, Inc.
+ "^videostrong,.*":
+ description: Videostrong Technology Co., Ltd.
"^virtio,.*":
description: Virtual I/O Device Specification, developed by the OASIS consortium
"^vishay,.*":
--
2.23.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 12+ messages in thread
end of thread, other threads:[~2019-11-18 19:21 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-17 17:56 [RFC v2 PATCH 0/4] add support for videostrong KII Pro Mohammad Rasim
2019-11-17 17:56 ` [RFC PATCH 1/4] dt-bindings: Add vendor prefix for Videostrong Technology Co., Ltd Mohammad Rasim
2019-11-18 10:03 ` Neil Armstrong
2019-11-17 17:56 ` [RFC PATCH 2/4] dt-bindings: net: Add compatible for BCM4335A0 bluetooth module Mohammad Rasim
2019-11-18 10:03 ` Neil Armstrong
2019-11-18 17:53 ` Mohammad Rasim
2019-11-17 17:56 ` [RFC PATCH 3/4] arm64: dts: meson-gxbb: add support for Videostrong KII Pro Mohammad Rasim
2019-11-18 10:26 ` Neil Armstrong
2019-11-18 19:21 ` Mohammad Rasim
2019-11-17 17:56 ` [RFC PATCH 4/4] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth Mohammad Rasim
2019-11-18 10:04 ` Neil Armstrong
-- strict thread matches above, loose matches on Subject: below --
2019-11-17 17:24 [RFC PATCH 1/4] dt-bindings: Add vendor prefix for Videostrong Technology Co., Ltd Mohammad Rasim
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).