* [PATCH 0/3] pwm: Add support for Amlogic Meson G12A @ 2019-04-12 9:23 Neil Armstrong 2019-04-12 9:23 ` [PATCH 1/3] dt-bindings: pwm: Update bindings for the Meson G12A Family Neil Armstrong ` (2 more replies) 0 siblings, 3 replies; 7+ messages in thread From: Neil Armstrong @ 2019-04-12 9:23 UTC (permalink / raw) To: thierry.reding Cc: linux-pwm, Neil Armstrong, baylibre-upstreaming, linux-kernel, linux-amlogic, linux-arm-kernel This adds support for the PWM modules on the Amlogic Meson G12A SoC family, including bindings changes and DT nodes. Neil Armstrong (3): dt-bindings: pwm: Update bindings for the Meson G12A Family pwm: meson: Add clock source configuration for Meson G12A arm64: dts: meson-g12a: Add PWM nodes .../devicetree/bindings/pwm/pwm-meson.txt | 2 + arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 179 ++++++++++++++++++ drivers/pwm/pwm-meson.c | 17 ++ 3 files changed, 198 insertions(+) -- 2.21.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/3] dt-bindings: pwm: Update bindings for the Meson G12A Family 2019-04-12 9:23 [PATCH 0/3] pwm: Add support for Amlogic Meson G12A Neil Armstrong @ 2019-04-12 9:23 ` Neil Armstrong 2019-04-12 9:23 ` [PATCH 2/3] pwm: meson: Add clock source configuration for Meson G12A Neil Armstrong 2019-04-12 9:23 ` [PATCH 3/3] arm64: dts: meson-g12a: Add PWM nodes Neil Armstrong 2 siblings, 0 replies; 7+ messages in thread From: Neil Armstrong @ 2019-04-12 9:23 UTC (permalink / raw) To: thierry.reding, devicetree Cc: linux-pwm, Neil Armstrong, baylibre-upstreaming, linux-kernel, linux-amlogic, linux-arm-kernel Update the doc to explicitly support Meson G12A Family Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- Documentation/devicetree/bindings/pwm/pwm-meson.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt index 1fa3f7182133..e2bcd8e92ad0 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-meson.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt @@ -7,6 +7,8 @@ Required properties: or "amlogic,meson-gxbb-ao-pwm" or "amlogic,meson-axg-ee-pwm" or "amlogic,meson-axg-ao-pwm" + or "amlogic,meson-g12a-ee-pwm" + or "amlogic,meson-g12a-ao-pwm" - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of the cells format. -- 2.21.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/3] pwm: meson: Add clock source configuration for Meson G12A 2019-04-12 9:23 [PATCH 0/3] pwm: Add support for Amlogic Meson G12A Neil Armstrong 2019-04-12 9:23 ` [PATCH 1/3] dt-bindings: pwm: Update bindings for the Meson G12A Family Neil Armstrong @ 2019-04-12 9:23 ` Neil Armstrong 2019-04-13 11:33 ` Martin Blumenstingl 2019-04-12 9:23 ` [PATCH 3/3] arm64: dts: meson-g12a: Add PWM nodes Neil Armstrong 2 siblings, 1 reply; 7+ messages in thread From: Neil Armstrong @ 2019-04-12 9:23 UTC (permalink / raw) To: thierry.reding Cc: linux-pwm, Neil Armstrong, baylibre-upstreaming, linux-kernel, linux-amlogic, linux-arm-kernel For PWM controller in the Meson G12A SoC, the EE domain and AO domain have different clock sources. This patch tries to describe them in the DT compatible data. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/pwm/pwm-meson.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c index 2b03938039b6..46287cc8a0eb 100644 --- a/drivers/pwm/pwm-meson.c +++ b/drivers/pwm/pwm-meson.c @@ -434,6 +434,15 @@ static const struct meson_pwm_data pwm_axg_ao_data = { .num_parents = ARRAY_SIZE(pwm_axg_ao_parent_names), }; +static const char * const pwm_g12a_ee_parent_names[] = { + "xtal", "hdmi_pll", "fclk_div4", "fclk_div3" +}; + +static const struct meson_pwm_data pwm_g12a_ee_data = { + .parent_names = pwm_g12a_ee_parent_names, + .num_parents = ARRAY_SIZE(pwm_g12a_ee_parent_names), +}; + static const struct of_device_id meson_pwm_matches[] = { { .compatible = "amlogic,meson8b-pwm", @@ -455,6 +464,14 @@ static const struct of_device_id meson_pwm_matches[] = { .compatible = "amlogic,meson-axg-ao-pwm", .data = &pwm_axg_ao_data }, + { + .compatible = "amlogic,meson-g12a-ee-pwm", + .data = &pwm_g12a_ee_data + }, + { + .compatible = "amlogic,meson-g12a-ao-pwm", + .data = &pwm_axg_ao_data + }, {}, }; MODULE_DEVICE_TABLE(of, meson_pwm_matches); -- 2.21.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/3] pwm: meson: Add clock source configuration for Meson G12A 2019-04-12 9:23 ` [PATCH 2/3] pwm: meson: Add clock source configuration for Meson G12A Neil Armstrong @ 2019-04-13 11:33 ` Martin Blumenstingl 2019-04-23 9:35 ` Neil Armstrong 0 siblings, 1 reply; 7+ messages in thread From: Martin Blumenstingl @ 2019-04-13 11:33 UTC (permalink / raw) To: Neil Armstrong Cc: linux-pwm, baylibre-upstreaming, linux-kernel, thierry.reding, linux-amlogic, linux-arm-kernel Hi Neil, On Fri, Apr 12, 2019 at 11:24 AM Neil Armstrong <narmstrong@baylibre.com> wrote: > > For PWM controller in the Meson G12A SoC, the EE domain and AO domain > have different clock sources. This patch tries to describe them in the > DT compatible data. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > drivers/pwm/pwm-meson.c | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c > index 2b03938039b6..46287cc8a0eb 100644 > --- a/drivers/pwm/pwm-meson.c > +++ b/drivers/pwm/pwm-meson.c > @@ -434,6 +434,15 @@ static const struct meson_pwm_data pwm_axg_ao_data = { > .num_parents = ARRAY_SIZE(pwm_axg_ao_parent_names), > }; > > +static const char * const pwm_g12a_ee_parent_names[] = { > + "xtal", "hdmi_pll", "fclk_div4", "fclk_div3" > +}; > + > +static const struct meson_pwm_data pwm_g12a_ee_data = { > + .parent_names = pwm_g12a_ee_parent_names, > + .num_parents = ARRAY_SIZE(pwm_g12a_ee_parent_names), > +}; > + > static const struct of_device_id meson_pwm_matches[] = { > { > .compatible = "amlogic,meson8b-pwm", > @@ -455,6 +464,14 @@ static const struct of_device_id meson_pwm_matches[] = { > .compatible = "amlogic,meson-axg-ao-pwm", > .data = &pwm_axg_ao_data > }, > + { > + .compatible = "amlogic,meson-g12a-ee-pwm", > + .data = &pwm_g12a_ee_data > + }, the PWM part is fine for me > + { > + .compatible = "amlogic,meson-g12a-ao-pwm", > + .data = &pwm_axg_ao_data > + }, > {}, but I'm not sure about "amlogic,meson-g12a-ao-pwm": the public S922X datasheet from Hardkernel [0] section 6.6.1.2 "AO Clock Tree" (page 107) mentions two different clock sources for the AO PWMs: - AO PWM A and B has parents xtal, aoclk81, fclk_div4 and fclk_div5 (pwm_axg_ao_data has the first two parents swapped) - AO PWM C and D only have xtal and aoclk81 as parents regarding the clock parents: I'm not sure whether pwm_axg_ao_data is wrong, G12A is different from G12B or the G12B datasheet is "correct". can you please list what you have tested so far and confirm that the parents you are using are "correct" regarding the compatible string "amlogic,meson-g12a-ao-pwm": if there are two different AO PWM modules, should we name it differently, for example by splitting this compatible string into: - "amlogic,meson-g12a-ao-pwm-ab" (with parents: xtal, aoclk81, fclk_div4 and fclk_div5) - "amlogic,meson-g12a-ao-pwm-cd" (with parents: xtal and aoclk81) Regards Martin [0] https://dn.odroid.com/S922X/ODROID-N2/Datasheet/S922X_Public_Datasheet_V0.2.pdf _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/3] pwm: meson: Add clock source configuration for Meson G12A 2019-04-13 11:33 ` Martin Blumenstingl @ 2019-04-23 9:35 ` Neil Armstrong 0 siblings, 0 replies; 7+ messages in thread From: Neil Armstrong @ 2019-04-23 9:35 UTC (permalink / raw) To: Martin Blumenstingl Cc: linux-pwm, baylibre-upstreaming, linux-kernel, thierry.reding, linux-amlogic, linux-arm-kernel On 13/04/2019 13:33, Martin Blumenstingl wrote: > Hi Neil, > > On Fri, Apr 12, 2019 at 11:24 AM Neil Armstrong <narmstrong@baylibre.com> wrote: >> >> For PWM controller in the Meson G12A SoC, the EE domain and AO domain >> have different clock sources. This patch tries to describe them in the >> DT compatible data. >> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> >> --- >> drivers/pwm/pwm-meson.c | 17 +++++++++++++++++ >> 1 file changed, 17 insertions(+) >> >> diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c >> index 2b03938039b6..46287cc8a0eb 100644 >> --- a/drivers/pwm/pwm-meson.c >> +++ b/drivers/pwm/pwm-meson.c >> @@ -434,6 +434,15 @@ static const struct meson_pwm_data pwm_axg_ao_data = { >> .num_parents = ARRAY_SIZE(pwm_axg_ao_parent_names), >> }; >> >> +static const char * const pwm_g12a_ee_parent_names[] = { >> + "xtal", "hdmi_pll", "fclk_div4", "fclk_div3" >> +}; >> + >> +static const struct meson_pwm_data pwm_g12a_ee_data = { >> + .parent_names = pwm_g12a_ee_parent_names, >> + .num_parents = ARRAY_SIZE(pwm_g12a_ee_parent_names), >> +}; >> + >> static const struct of_device_id meson_pwm_matches[] = { >> { >> .compatible = "amlogic,meson8b-pwm", >> @@ -455,6 +464,14 @@ static const struct of_device_id meson_pwm_matches[] = { >> .compatible = "amlogic,meson-axg-ao-pwm", >> .data = &pwm_axg_ao_data >> }, >> + { >> + .compatible = "amlogic,meson-g12a-ee-pwm", >> + .data = &pwm_g12a_ee_data >> + }, > the PWM part is fine for me > >> + { >> + .compatible = "amlogic,meson-g12a-ao-pwm", >> + .data = &pwm_axg_ao_data >> + }, >> {}, > but I'm not sure about "amlogic,meson-g12a-ao-pwm": > the public S922X datasheet from Hardkernel [0] section 6.6.1.2 "AO > Clock Tree" (page 107) mentions two different clock sources for the AO > PWMs: > - AO PWM A and B has parents xtal, aoclk81, fclk_div4 and fclk_div5 > (pwm_axg_ao_data has the first two parents swapped) > - AO PWM C and D only have xtal and aoclk81 as parents You are right, and it's the same on G12A. > > regarding the clock parents: > I'm not sure whether pwm_axg_ao_data is wrong, G12A is different from > G12B or the G12B datasheet is "correct". can you please list what you > have tested so far and confirm that the parents you are using are > "correct" You were right, we need 2 different compatibles here... > > regarding the compatible string "amlogic,meson-g12a-ao-pwm": > if there are two different AO PWM modules, should we name it > differently, for example by splitting this compatible string into: > - "amlogic,meson-g12a-ao-pwm-ab" (with parents: xtal, aoclk81, > fclk_div4 and fclk_div5) > - "amlogic,meson-g12a-ao-pwm-cd" (with parents: xtal and aoclk81) > Exact > > Regards > Martin > > > [0] https://dn.odroid.com/S922X/ODROID-N2/Datasheet/S922X_Public_Datasheet_V0.2.pdf > Thanks, Neil _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 3/3] arm64: dts: meson-g12a: Add PWM nodes 2019-04-12 9:23 [PATCH 0/3] pwm: Add support for Amlogic Meson G12A Neil Armstrong 2019-04-12 9:23 ` [PATCH 1/3] dt-bindings: pwm: Update bindings for the Meson G12A Family Neil Armstrong 2019-04-12 9:23 ` [PATCH 2/3] pwm: meson: Add clock source configuration for Meson G12A Neil Armstrong @ 2019-04-12 9:23 ` Neil Armstrong 2019-04-13 11:37 ` Martin Blumenstingl 2 siblings, 1 reply; 7+ messages in thread From: Neil Armstrong @ 2019-04-12 9:23 UTC (permalink / raw) To: thierry.reding Cc: linux-pwm, Neil Armstrong, baylibre-upstreaming, linux-kernel, linux-amlogic, linux-arm-kernel This adds the EE and AO PWM nodes and the possible pinctrl settings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 179 ++++++++++++++++++++ 1 file changed, 179 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 501496eb34c6..5b7c9076e2d1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -355,6 +355,94 @@ }; }; + pwm_a_pins: pwm-a { + mux { + groups = "pwm_a"; + function = "pwm_a"; + bias-disable; + }; + }; + + pwm_b_x7_pins: pwm-b-x7 { + mux { + groups = "pwm_b_x7"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_b_x19_pins: pwm-b-x19 { + mux { + groups = "pwm_b_x19"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_c_c_pins: pwm-c-c { + mux { + groups = "pwm_c_c"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x5_pins: pwm-c-x5 { + mux { + groups = "pwm_c_x5"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x8_pins: pwm-c-x8 { + mux { + groups = "pwm_c_x8"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_d_x3_pins: pwm-d-x3 { + mux { + groups = "pwm_d_x3"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_d_x6_pins: pwm-d-x6 { + mux { + groups = "pwm_d_x6"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + bias-disable; + }; + }; + + pwm_f_x_pins: pwm-f-x { + mux { + groups = "pwm_f_x"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_f_h_pins: pwm-f-h { + mux { + groups = "pwm_f_h"; + function = "pwm_f"; + bias-disable; + }; + }; + uart_a_pins: uart-a { mux { groups = "uart_a_tx", @@ -632,6 +720,62 @@ bias-disable; }; }; + + pwm_ao_a_pins: pwm-ao-a { + mux { + groups = "pwm_ao_a"; + function = "pwm_ao_a"; + bias-disable; + }; + }; + + pwm_ao_b_pins: pwm-ao-b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + bias-disable; + }; + }; + + pwm_ao_c_4_pins: pwm-ao-c-4 { + mux { + groups = "pwm_ao_c_4"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_c_6_pins: pwm-ao-c-6 { + mux { + groups = "pwm_ao_c_6"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_d_5_pins: pwm-ao-d-5 { + mux { + groups = "pwm_ao_d_5"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_10_pins: pwm-ao-d-10 { + mux { + groups = "pwm_ao_d_10"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_e_pins: pwm-ao-d-e { + mux { + groups = "pwm_ao_d_e"; + function = "pwm_ao_d"; + bias-disable; + }; + }; }; }; @@ -659,6 +803,13 @@ status = "disabled"; }; + pwm_AO_cd: pwm@2000 { + compatible = "amlogic,meson-g12a-ao-pwm"; + reg = <0x0 0x2000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; @@ -681,6 +832,13 @@ status = "disabled"; }; + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-g12a-ao-pwm"; + reg = <0x0 0x7000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + ir: ir@8000 { compatible = "amlogic,meson-gxbb-ir"; reg = <0x0 0x8000 0x0 0x20>; @@ -774,6 +932,27 @@ #reset-cells = <1>; }; + pwm_ef: pwm@19000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x19000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + clk_msr: clock-measure@18000 { compatible = "amlogic,meson-g12a-clk-measure"; reg = <0x0 0x18000 0x0 0x10>; -- 2.21.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 3/3] arm64: dts: meson-g12a: Add PWM nodes 2019-04-12 9:23 ` [PATCH 3/3] arm64: dts: meson-g12a: Add PWM nodes Neil Armstrong @ 2019-04-13 11:37 ` Martin Blumenstingl 0 siblings, 0 replies; 7+ messages in thread From: Martin Blumenstingl @ 2019-04-13 11:37 UTC (permalink / raw) To: Neil Armstrong Cc: linux-pwm, baylibre-upstreaming, linux-kernel, thierry.reding, linux-amlogic, linux-arm-kernel On Fri, Apr 12, 2019 at 11:24 AM Neil Armstrong <narmstrong@baylibre.com> wrote: > > This adds the EE and AO PWM nodes and the possible pinctrl settings. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> I reviewed the controller definitions and picked three pinctrl nodes - all of them are fine: Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> that said, I had two questions regarding the AO PWM controllers in PATCH 2/3 of this series which should be considered before applying this patch _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-04-23 9:36 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-04-12 9:23 [PATCH 0/3] pwm: Add support for Amlogic Meson G12A Neil Armstrong 2019-04-12 9:23 ` [PATCH 1/3] dt-bindings: pwm: Update bindings for the Meson G12A Family Neil Armstrong 2019-04-12 9:23 ` [PATCH 2/3] pwm: meson: Add clock source configuration for Meson G12A Neil Armstrong 2019-04-13 11:33 ` Martin Blumenstingl 2019-04-23 9:35 ` Neil Armstrong 2019-04-12 9:23 ` [PATCH 3/3] arm64: dts: meson-g12a: Add PWM nodes Neil Armstrong 2019-04-13 11:37 ` Martin Blumenstingl
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).