Linux-api Archive on lore.kernel.org
 help / color / Atom feed
From: Kanchan Joshi <joshi.k@samsung.com>
To: axboe@kernel.dk, viro@zeniv.linux.org.uk, bcrl@kvack.org
Cc: willy@infradead.org, hch@infradead.org, Damien.LeMoal@wdc.com,
	asml.silence@gmail.com, linux-fsdevel@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-aio@kvack.org,
	io-uring@vger.kernel.org, linux-block@vger.kernel.org,
	linux-api@vger.kernel.org, Kanchan Joshi <joshi.k@samsung.com>
Subject: [PATCH v4 0/6] zone-append support in io-uring and aio
Date: Fri, 24 Jul 2020 21:19:16 +0530
Message-ID: <1595605762-17010-1-git-send-email-joshi.k@samsung.com> (raw)
In-Reply-To: <CGME20200724155244epcas5p2902f57e36e490ee8772da19aa9408cdc@epcas5p2.samsung.com>

Changes since v3:
- Return absolute append offset in bytes, in both io_uring and aio
- Repurpose cqe's res/flags and introduce res64 to send 64bit append-offset
- Change iov_iter_truncate to report whether it actually truncated
- Prevent short write and return failure if zone-append is spanning
beyond end-of-device
- Change ki_complete(...,long ret2) interface to support 64bit ret2

v3: https://lore.kernel.org/lkml/1593974870-18919-1-git-send-email-joshi.k@samsung.com/

Changes since v2:
- Use file append infra (O_APPEND/RWF_APPEND) to trigger zone-append
(Christoph, Wilcox)
- Added Block I/O path changes (Damien). Avoided append split into multi-bio.
- Added patch to extend zone-append in block-layer to support bvec iov_iter.
Append using io-uring fixed-buffer is enabled with this.
- Made io-uring support code more concise, added changes mentioned by Pavel.

v2: https://lore.kernel.org/io-uring/1593105349-19270-1-git-send-email-joshi.k@samsung.com/

Changes since v1:
- No new opcodes in uring or aio. Use RWF_ZONE_APPEND flag instead.
- linux-aio changes vanish because of no new opcode
- Fixed the overflow and other issues mentioned by Damien
- Simplified uring support code, fixed the issues mentioned by Pavel
- Added error checks for io-uring fixed-buffer and sync kiocb

v1: https://lore.kernel.org/io-uring/1592414619-5646-1-git-send-email-joshi.k@samsung.com/

Cover letter (updated):

This patchset enables zone-append using io-uring/linux-aio, on block IO path.
Purpose is to provide zone-append consumption ability to applications which are
using zoned-block-device directly.
Application can send write with existing O/RWF_APPEND;On a zoned-block-device
this will trigger zone-append. On regular block device, existing file-append
behavior is retained. However, infra allows zone-append to be triggered on
any file if FMODE_ZONE_APPEND (new kernel-only fmode) is set during open.

With zone-append, written-location within zone is known only after completion.
So apart from the usual return value of write, additional means are
needed to obtain the actual written-location.

In aio, 64bit append-offset is returned to application using res2
field of io_event -

struct io_event {
        __u64           data;           /* the data field from the iocb */
        __u64           obj;            /* what iocb this event came from */
        __s64           res;            /* result code for this event */
        __s64           res2;           /* secondary result */
};

In io-uring, [cqe->res, cqq->flags] repurposed into res64 to return
64bit append-offset to user-space.

struct io_uring_cqe {
        __u64   user_data;      /* sqe->data submission passed back */
        union {
                struct {
                        __s32   res;    /* result code for this event */
                        __u32   flags;
                };
                __s64   res64;  /* appending offset for zone append */
        };
};
Zone-append write is ensured not to be a short-write.

Kanchan Joshi (3):
  fs: introduce FMODE_ZONE_APPEND and IOCB_ZONE_APPEND
  block: add zone append handling for direct I/O path
  block: enable zone-append for iov_iter of bvec type

SelvaKumar S (3):
  fs: change ki_complete interface to support 64bit ret2
  uio: return status with iov truncation
  io_uring: add support for zone-append

 block/bio.c                       | 31 ++++++++++++++++++++---
 drivers/block/loop.c              |  2 +-
 drivers/nvme/target/io-cmd-file.c |  2 +-
 drivers/target/target_core_file.c |  2 +-
 fs/aio.c                          |  2 +-
 fs/block_dev.c                    | 51 +++++++++++++++++++++++++++++--------
 fs/io_uring.c                     | 53 +++++++++++++++++++++++++++++++--------
 fs/overlayfs/file.c               |  2 +-
 include/linux/fs.h                | 16 +++++++++---
 include/linux/uio.h               |  7 ++++--
 include/uapi/linux/io_uring.h     |  9 +++++--
 11 files changed, 142 insertions(+), 35 deletions(-)

-- 
2.7.4


       reply index

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20200724155244epcas5p2902f57e36e490ee8772da19aa9408cdc@epcas5p2.samsung.com>
2020-07-24 15:49 ` Kanchan Joshi [this message]
     [not found]   ` <CGME20200724155258epcas5p1a75b926950a18cd1e6c8e7a047e6c589@epcas5p1.samsung.com>
2020-07-24 15:49     ` [PATCH v4 1/6] fs: introduce FMODE_ZONE_APPEND and IOCB_ZONE_APPEND Kanchan Joshi
2020-07-24 16:34       ` Jens Axboe
2020-07-26 15:18       ` Christoph Hellwig
2020-07-28  1:49         ` Matthew Wilcox
2020-07-28  7:26           ` Christoph Hellwig
     [not found]   ` <CGME20200724155324epcas5p18e1d3b4402d1e4a8eca87d0b56a3fa9b@epcas5p1.samsung.com>
2020-07-24 15:49     ` [PATCH v4 2/6] fs: change ki_complete interface to support 64bit ret2 Kanchan Joshi
2020-07-26 15:18       ` Christoph Hellwig
     [not found]   ` <CGME20200724155329epcas5p345ba6bad0b8fe18056bb4bcd26c10019@epcas5p3.samsung.com>
2020-07-24 15:49     ` [PATCH v4 3/6] uio: return status with iov truncation Kanchan Joshi
     [not found]   ` <CGME20200724155341epcas5p15bfc55927f2abb60f19784270fe8e377@epcas5p1.samsung.com>
2020-07-24 15:49     ` [PATCH v4 4/6] block: add zone append handling for direct I/O path Kanchan Joshi
2020-07-26 15:19       ` Christoph Hellwig
     [not found]   ` <CGME20200724155346epcas5p2cfb383fe9904a45280c6145f4c13e1b4@epcas5p2.samsung.com>
2020-07-24 15:49     ` [PATCH v4 5/6] block: enable zone-append for iov_iter of bvec type Kanchan Joshi
2020-07-26 15:20       ` Christoph Hellwig
     [not found]   ` <CGME20200724155350epcas5p3b8f1d59eda7f8fbb38c828f692d42fd6@epcas5p3.samsung.com>
2020-07-24 15:49     ` [PATCH v4 6/6] io_uring: add support for zone-append Kanchan Joshi
2020-07-24 16:29       ` Jens Axboe
2020-07-27 19:16         ` Kanchan Joshi
2020-07-27 20:34           ` Jens Axboe
2020-07-30 16:08             ` Pavel Begunkov
2020-07-30 16:13               ` Jens Axboe
2020-07-30 16:26                 ` Pavel Begunkov
2020-07-30 17:16                   ` Jens Axboe
2020-07-30 17:38                     ` Pavel Begunkov
2020-07-30 17:51                       ` Kanchan Joshi
2020-07-30 17:54                         ` Jens Axboe
2020-07-30 18:25                           ` Kanchan Joshi
2020-07-31  6:42                             ` Damien Le Moal
2020-07-31  6:45                               ` hch
2020-07-31  6:59                                 ` Damien Le Moal
2020-07-31  7:58                                   ` Kanchan Joshi
2020-07-31  8:14                                     ` Damien Le Moal
2020-07-31  9:14                                       ` hch
2020-07-31  9:34                                         ` Damien Le Moal
2020-07-31  9:41                                           ` hch
2020-07-31 10:16                                             ` Damien Le Moal
2020-07-31 12:51                                               ` hch
2020-07-31 13:08                                                 ` hch
2020-07-31 15:07                                                   ` Kanchan Joshi
2020-08-05  7:35                                                 ` Damien Le Moal
2020-08-14  8:14                                                   ` hch
2020-08-14  8:27                                                     ` Damien Le Moal
2020-08-14 12:04                                                       ` hch
2020-08-14 12:20                                                         ` Damien Le Moal
2020-09-07  7:01                                                     ` Kanchan Joshi
2020-09-08 15:18                                                       ` hch
2020-09-24 17:19                                                         ` Kanchan Joshi
2020-09-25  2:52                                                           ` Damien Le Moal
2020-07-31  9:38                                       ` Kanchan Joshi
2020-07-31  7:08                               ` Kanchan Joshi
2020-07-30 15:57       ` Pavel Begunkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1595605762-17010-1-git-send-email-joshi.k@samsung.com \
    --to=joshi.k@samsung.com \
    --cc=Damien.LeMoal@wdc.com \
    --cc=asml.silence@gmail.com \
    --cc=axboe@kernel.dk \
    --cc=bcrl@kvack.org \
    --cc=hch@infradead.org \
    --cc=io-uring@vger.kernel.org \
    --cc=linux-aio@kvack.org \
    --cc=linux-api@vger.kernel.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=viro@zeniv.linux.org.uk \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-api Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-api/0 linux-api/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-api linux-api/ https://lore.kernel.org/linux-api \
		linux-api@vger.kernel.org
	public-inbox-index linux-api

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-api


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git