* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-18 20:45 ` [PATCH v2] lsm: adds process attribute getter " Shervin Oloumi
@ 2023-05-18 21:26 ` Casey Schaufler
2023-05-22 19:56 ` Paul Moore
2023-05-24 16:05 ` Mickaël Salaün
2023-05-19 5:22 ` kernel test robot
2023-05-24 16:48 ` Mickaël Salaün
2 siblings, 2 replies; 32+ messages in thread
From: Casey Schaufler @ 2023-05-18 21:26 UTC (permalink / raw)
To: Shervin Oloumi, mic
Cc: linux-security-module, jorgelo, keescook, groeck, jeffxu,
allenwebb, gnoack3000, areber, criu, linux-api, jannh, brauner,
Casey Schaufler
On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
> Adds a new getprocattr hook function to the Landlock LSM, which tracks
> the landlocked state of the process. This is invoked when user-space
> reads /proc/[pid]/attr/domain
Please don't add a Landlock specific entry directly in the attr/
directory. Add it only to attr/landlock.
Also be aware that the LSM maintainer (Paul Moore) wants to move
away from the /proc/.../attr interfaces in favor of a new system call,
which is in review.
> to determine whether a given process is
> sand-boxed using Landlock. When the target process is not sand-boxed,
> the result is "none", otherwise the result is empty, as we still need to
> decide what kind of domain information is best to provide in "domain".
Unless it's too late, you should consider using a term other than "domain".
Domain is used in many contexts already, and your use could be confused
with any number of those.
>
> The hook function also performs an access check. The request is rejected
> if the tracing process is the same as the target process, or if the
> tracing process domain is not an ancestor to the target process domain.
>
> Adds a new directory for landlock under the process attribute
> filesystem, and defines "domain" as a read-only process attribute entry
> for landlock.
>
> Signed-off-by: Shervin Oloumi <enlightened@chromium.org>
> ---
> fs/proc/base.c | 11 +++++++++++
> security/landlock/fs.c | 38 ++++++++++++++++++++++++++++++++++++++
> security/landlock/fs.h | 1 +
> security/landlock/ptrace.c | 4 ++--
> security/landlock/ptrace.h | 3 +++
> 5 files changed, 55 insertions(+), 2 deletions(-)
>
> diff --git a/fs/proc/base.c b/fs/proc/base.c
> index 9e479d7d202b..b257ea704666 100644
> --- a/fs/proc/base.c
> +++ b/fs/proc/base.c
> @@ -2851,6 +2851,13 @@ static const struct pid_entry apparmor_attr_dir_stuff[] = {
> LSM_DIR_OPS(apparmor);
> #endif
>
> +#ifdef CONFIG_SECURITY_LANDLOCK
> +static const struct pid_entry landlock_attr_dir_stuff[] = {
> + ATTR("landlock", "domain", 0444),
> +};
> +LSM_DIR_OPS(landlock);
> +#endif
> +
> static const struct pid_entry attr_dir_stuff[] = {
> ATTR(NULL, "current", 0666),
> ATTR(NULL, "prev", 0444),
> @@ -2866,6 +2873,10 @@ static const struct pid_entry attr_dir_stuff[] = {
> DIR("apparmor", 0555,
> proc_apparmor_attr_dir_inode_ops, proc_apparmor_attr_dir_ops),
> #endif
> +#ifdef CONFIG_SECURITY_LANDLOCK
> + DIR("landlock", 0555,
> + proc_landlock_attr_dir_inode_ops, proc_landlock_attr_dir_ops),
> +#endif
> };
>
> static int proc_attr_dir_readdir(struct file *file, struct dir_context *ctx)
> diff --git a/security/landlock/fs.c b/security/landlock/fs.c
> index adcea0fe7e68..2f8b0837a0fd 100644
> --- a/security/landlock/fs.c
> +++ b/security/landlock/fs.c
> @@ -1280,6 +1280,42 @@ static int hook_file_truncate(struct file *const file)
> return -EACCES;
> }
>
> +/* process attribute interfaces */
> +
> +/**
> + * landlock_getprocattr - Landlock process attribute getter
> + * @task: the object task
> + * @name: the name of the attribute in /proc/.../attr
> + * @value: where to put the result
> + *
> + * Performs access checks and writes any applicable results to value
> + *
> + * Returns the length of the result inside value or an error code
> + */
> +static int landlock_getprocattr(struct task_struct *task, const char *name,
> + char **value)
> +{
> + char *val = "";
> + int slen;
> +
> + // If the tracing process is landlocked, ensure its domain is an
> + // ancestor to the target process domain.
Please read the kernel style documentation. "//" comments are
not used in the kernel.
> + if (landlocked(current))
> + if (current == task || !task_is_scoped(current, task))
> + return -EACCES;
> +
> + // The only supported attribute is "domain".
> + if (strcmp(name, "domain") != 0)
> + return -EINVAL;
> +
> + if (!landlocked(task))
> + val = "none";
> +
> + slen = strlen(val);
> + *value = val;
> + return slen;
> +}
> +
> static struct security_hook_list landlock_hooks[] __lsm_ro_after_init = {
> LSM_HOOK_INIT(inode_free_security, hook_inode_free_security),
>
> @@ -1302,6 +1338,8 @@ static struct security_hook_list landlock_hooks[] __lsm_ro_after_init = {
> LSM_HOOK_INIT(file_alloc_security, hook_file_alloc_security),
> LSM_HOOK_INIT(file_open, hook_file_open),
> LSM_HOOK_INIT(file_truncate, hook_file_truncate),
> +
> + LSM_HOOK_INIT(getprocattr, landlock_getprocattr),
> };
>
> __init void landlock_add_fs_hooks(void)
> diff --git a/security/landlock/fs.h b/security/landlock/fs.h
> index 488e4813680a..64145e8b5537 100644
> --- a/security/landlock/fs.h
> +++ b/security/landlock/fs.h
> @@ -13,6 +13,7 @@
> #include <linux/init.h>
> #include <linux/rcupdate.h>
>
> +#include "ptrace.h"
> #include "ruleset.h"
> #include "setup.h"
>
> diff --git a/security/landlock/ptrace.c b/security/landlock/ptrace.c
> index 4c5b9cd71286..de943f0f3899 100644
> --- a/security/landlock/ptrace.c
> +++ b/security/landlock/ptrace.c
> @@ -47,8 +47,8 @@ static bool domain_scope_le(const struct landlock_ruleset *const parent,
> return false;
> }
>
> -static bool task_is_scoped(const struct task_struct *const parent,
> - const struct task_struct *const child)
> +const bool task_is_scoped(const struct task_struct *const parent,
> + const struct task_struct *const child)
> {
> bool is_scoped;
> const struct landlock_ruleset *dom_parent, *dom_child;
> diff --git a/security/landlock/ptrace.h b/security/landlock/ptrace.h
> index 265b220ae3bf..c6eb08951fc1 100644
> --- a/security/landlock/ptrace.h
> +++ b/security/landlock/ptrace.h
> @@ -11,4 +11,7 @@
>
> __init void landlock_add_ptrace_hooks(void);
>
> +const bool task_is_scoped(const struct task_struct *const parent,
> + const struct task_struct *const child);
> +
> #endif /* _SECURITY_LANDLOCK_PTRACE_H */
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-18 21:26 ` Casey Schaufler
@ 2023-05-22 19:56 ` Paul Moore
2023-05-23 6:13 ` Jeff Xu
2023-05-24 16:05 ` Mickaël Salaün
1 sibling, 1 reply; 32+ messages in thread
From: Paul Moore @ 2023-05-22 19:56 UTC (permalink / raw)
To: Casey Schaufler
Cc: Shervin Oloumi, mic, linux-security-module, jorgelo, keescook,
groeck, jeffxu, allenwebb, gnoack3000, areber, criu, linux-api,
jannh, brauner
On Thu, May 18, 2023 at 5:26 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
> > Adds a new getprocattr hook function to the Landlock LSM, which tracks
> > the landlocked state of the process. This is invoked when user-space
> > reads /proc/[pid]/attr/domain
>
> Please don't add a Landlock specific entry directly in the attr/
> directory. Add it only to attr/landlock.
>
> Also be aware that the LSM maintainer (Paul Moore) wants to move
> away from the /proc/.../attr interfaces in favor of a new system call,
> which is in review.
What Casey said above.
There is still some uncertainty around timing, and if we're perfectly
honest, acceptance of the new syscalls at the Linus level, but yes, I
would very much like to see the LSM infrastructure move away from
procfs and towards a syscall API. Part of the reasoning is that the
current procfs API is ill-suited to handle the multiple, stacked LSMs
and the other part being the complexity of procfs in a namespaced
system. If the syscall API is ultimately rejected, we will need to
revisit the idea of a procfs API, but even then I think we'll need to
make some changes to the current approach.
As I believe we are in the latter stages of review for the syscall
API, perhaps you could take a look and ensure that the current
proposed API works for what you are envisioning with Landlock?
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-22 19:56 ` Paul Moore
@ 2023-05-23 6:13 ` Jeff Xu
2023-05-23 15:32 ` Casey Schaufler
2023-05-23 21:12 ` Paul Moore
0 siblings, 2 replies; 32+ messages in thread
From: Jeff Xu @ 2023-05-23 6:13 UTC (permalink / raw)
To: Paul Moore
Cc: Casey Schaufler, Shervin Oloumi, mic, linux-security-module,
jorgelo, keescook, groeck, allenwebb, gnoack3000, areber, criu,
linux-api, jannh, brauner
On Mon, May 22, 2023 at 12:56 PM Paul Moore <paul@paul-moore.com> wrote:
>
> On Thu, May 18, 2023 at 5:26 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> > On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
> > > Adds a new getprocattr hook function to the Landlock LSM, which tracks
> > > the landlocked state of the process. This is invoked when user-space
> > > reads /proc/[pid]/attr/domain
> >
> > Please don't add a Landlock specific entry directly in the attr/
> > directory. Add it only to attr/landlock.
> >
> > Also be aware that the LSM maintainer (Paul Moore) wants to move
> > away from the /proc/.../attr interfaces in favor of a new system call,
> > which is in review.
>
> What Casey said above.
>
> There is still some uncertainty around timing, and if we're perfectly
> honest, acceptance of the new syscalls at the Linus level, but yes, I
> would very much like to see the LSM infrastructure move away from
> procfs and towards a syscall API. Part of the reasoning is that the
> current procfs API is ill-suited to handle the multiple, stacked LSMs
> and the other part being the complexity of procfs in a namespaced
> system. If the syscall API is ultimately rejected, we will need to
> revisit the idea of a procfs API, but even then I think we'll need to
> make some changes to the current approach.
>
> As I believe we are in the latter stages of review for the syscall
> API, perhaps you could take a look and ensure that the current
> proposed API works for what you are envisioning with Landlock?
>
Which review/patch to look for the proposed API ?
I guess ChromeOS will need to backport to 5.10 when the proposal is accepted.
Thanks
-Jeff
> --
> paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-23 6:13 ` Jeff Xu
@ 2023-05-23 15:32 ` Casey Schaufler
2023-05-30 18:02 ` Jeff Xu
2023-05-23 21:12 ` Paul Moore
1 sibling, 1 reply; 32+ messages in thread
From: Casey Schaufler @ 2023-05-23 15:32 UTC (permalink / raw)
To: Jeff Xu, Paul Moore
Cc: Shervin Oloumi, mic, linux-security-module, jorgelo, keescook,
groeck, allenwebb, gnoack3000, areber, criu, linux-api, jannh,
brauner, Casey Schaufler
On 5/22/2023 11:13 PM, Jeff Xu wrote:
> On Mon, May 22, 2023 at 12:56 PM Paul Moore <paul@paul-moore.com> wrote:
>> On Thu, May 18, 2023 at 5:26 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>>> On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
>>>> Adds a new getprocattr hook function to the Landlock LSM, which tracks
>>>> the landlocked state of the process. This is invoked when user-space
>>>> reads /proc/[pid]/attr/domain
>>> Please don't add a Landlock specific entry directly in the attr/
>>> directory. Add it only to attr/landlock.
>>>
>>> Also be aware that the LSM maintainer (Paul Moore) wants to move
>>> away from the /proc/.../attr interfaces in favor of a new system call,
>>> which is in review.
>> What Casey said above.
>>
>> There is still some uncertainty around timing, and if we're perfectly
>> honest, acceptance of the new syscalls at the Linus level, but yes, I
>> would very much like to see the LSM infrastructure move away from
>> procfs and towards a syscall API. Part of the reasoning is that the
>> current procfs API is ill-suited to handle the multiple, stacked LSMs
>> and the other part being the complexity of procfs in a namespaced
>> system. If the syscall API is ultimately rejected, we will need to
>> revisit the idea of a procfs API, but even then I think we'll need to
>> make some changes to the current approach.
>>
>> As I believe we are in the latter stages of review for the syscall
>> API, perhaps you could take a look and ensure that the current
>> proposed API works for what you are envisioning with Landlock?
>>
> Which review/patch to look for the proposed API ?
https://lore.kernel.org/lkml/20230428203417.159874-3-casey@schaufler-ca.com/T/
> I guess ChromeOS will need to backport to 5.10 when the proposal is accepted.
>
> Thanks
> -Jeff
>
>
>> --
>> paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-23 15:32 ` Casey Schaufler
@ 2023-05-30 18:02 ` Jeff Xu
2023-05-30 19:05 ` Casey Schaufler
2023-05-31 13:01 ` Mickaël Salaün
0 siblings, 2 replies; 32+ messages in thread
From: Jeff Xu @ 2023-05-30 18:02 UTC (permalink / raw)
To: Casey Schaufler
Cc: Paul Moore, Shervin Oloumi, mic, linux-security-module, jorgelo,
keescook, groeck, allenwebb, gnoack3000, areber, criu, linux-api,
jannh, brauner
> >>
> >> As I believe we are in the latter stages of review for the syscall
> >> API, perhaps you could take a look and ensure that the current
> >> proposed API works for what you are envisioning with Landlock?
> >>
> > Which review/patch to look for the proposed API ?
>
> https://lore.kernel.org/lkml/20230428203417.159874-3-casey@schaufler-ca.com/T/
>
>
How easy is it to add a customized LSM with new APIs?
I'm asking because there are some hard-coded constant/macro, i.e.
+#define LSM_ID_LANDLOCK 111
(Do IDs need to be sequential ?)
+ define LSM_CONFIG_COUNT
Today, only security/Kconfig change is needed to add a new LSM, I think ?
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-30 18:02 ` Jeff Xu
@ 2023-05-30 19:05 ` Casey Schaufler
2023-05-31 13:01 ` Mickaël Salaün
1 sibling, 0 replies; 32+ messages in thread
From: Casey Schaufler @ 2023-05-30 19:05 UTC (permalink / raw)
To: Jeff Xu
Cc: Paul Moore, Shervin Oloumi, mic, linux-security-module, jorgelo,
keescook, groeck, allenwebb, gnoack3000, areber, criu, linux-api,
jannh, brauner, Casey Schaufler
On 5/30/2023 11:02 AM, Jeff Xu wrote:
>>>> As I believe we are in the latter stages of review for the syscall
>>>> API, perhaps you could take a look and ensure that the current
>>>> proposed API works for what you are envisioning with Landlock?
>>>>
>>> Which review/patch to look for the proposed API ?
>> https://lore.kernel.org/lkml/20230428203417.159874-3-casey@schaufler-ca.com/T/
>>
>>
> How easy is it to add a customized LSM with new APIs?
I haven't found it difficult, but that was in the pre-syscall era.
Look at Landlock for an example of LSM specific syscalls, if you want
to go that route.
> I'm asking because there are some hard-coded constant/macro, i.e.
>
> +#define LSM_ID_LANDLOCK 111
> (Do IDs need to be sequential ?)
No, but I would want a good reason for doing otherwise.
> + define LSM_CONFIG_COUNT
>
> Today, only security/Kconfig change is needed to add a new LSM, I think ?
That's correct. The syscall patches make it a trifle more difficult,
requiring they be acknowledged in security.c. We could probably work
around that, but it's really a small price to pay to get a constant
value.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-30 18:02 ` Jeff Xu
2023-05-30 19:05 ` Casey Schaufler
@ 2023-05-31 13:01 ` Mickaël Salaün
2023-06-01 20:45 ` Jeff Xu
1 sibling, 1 reply; 32+ messages in thread
From: Mickaël Salaün @ 2023-05-31 13:01 UTC (permalink / raw)
To: Jeff Xu, Casey Schaufler, Paul Moore
Cc: Shervin Oloumi, linux-security-module, jorgelo, keescook, groeck,
allenwebb, gnoack3000, areber, criu, linux-api, jannh, brauner
On 30/05/2023 20:02, Jeff Xu wrote:
>>>>
>>>> As I believe we are in the latter stages of review for the syscall
>>>> API, perhaps you could take a look and ensure that the current
>>>> proposed API works for what you are envisioning with Landlock?
>>>>
>>> Which review/patch to look for the proposed API ?
>>
>> https://lore.kernel.org/lkml/20230428203417.159874-3-casey@schaufler-ca.com/T/
>>
>>
> How easy is it to add a customized LSM with new APIs?
> I'm asking because there are some hard-coded constant/macro, i.e.
I guess this question is related to the Chromium OS LSM right? I think
this would be a good opportunity to think about mainlining this LSM to
avoid the hassle of dealing with LSM IDs.
>
> +#define LSM_ID_LANDLOCK 111
> (Do IDs need to be sequential ?)
>
> + define LSM_CONFIG_COUNT
>
> Today, only security/Kconfig change is needed to add a new LSM, I think ?
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-31 13:01 ` Mickaël Salaün
@ 2023-06-01 20:45 ` Jeff Xu
2023-06-01 21:30 ` Casey Schaufler
0 siblings, 1 reply; 32+ messages in thread
From: Jeff Xu @ 2023-06-01 20:45 UTC (permalink / raw)
To: Mickaël Salaün
Cc: Casey Schaufler, Paul Moore, Shervin Oloumi,
linux-security-module, jorgelo, keescook, groeck, allenwebb,
gnoack3000, areber, criu, linux-api, jannh, brauner
On Wed, May 31, 2023 at 6:01 AM Mickaël Salaün <mic@digikod.net> wrote:
>
>
> On 30/05/2023 20:02, Jeff Xu wrote:
> >>>>
> >>>> As I believe we are in the latter stages of review for the syscall
> >>>> API, perhaps you could take a look and ensure that the current
> >>>> proposed API works for what you are envisioning with Landlock?
> >>>>
> >>> Which review/patch to look for the proposed API ?
> >>
> >> https://lore.kernel.org/lkml/20230428203417.159874-3-casey@schaufler-ca.com/T/
> >>
> >>
> > How easy is it to add a customized LSM with new APIs?
> > I'm asking because there are some hard-coded constant/macro, i.e.
>
> I guess this question is related to the Chromium OS LSM right? I think
> this would be a good opportunity to think about mainlining this LSM to
> avoid the hassle of dealing with LSM IDs.
>
Yes :-)
I agree it is good to think about upstream, there are things chromeOS
did that can be beneficial to the main. At the same time, part of it
might never be accepted by upstream because it is chromeOS specific,
so those need to be cleaned up.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-06-01 20:45 ` Jeff Xu
@ 2023-06-01 21:30 ` Casey Schaufler
0 siblings, 0 replies; 32+ messages in thread
From: Casey Schaufler @ 2023-06-01 21:30 UTC (permalink / raw)
To: Jeff Xu, Mickaël Salaün
Cc: Paul Moore, Shervin Oloumi, linux-security-module, jorgelo,
keescook, groeck, allenwebb, gnoack3000, areber, criu, linux-api,
jannh, brauner, Casey Schaufler
On 6/1/2023 1:45 PM, Jeff Xu wrote:
> On Wed, May 31, 2023 at 6:01 AM Mickaël Salaün <mic@digikod.net> wrote:
>>
>> On 30/05/2023 20:02, Jeff Xu wrote:
>>>>>> As I believe we are in the latter stages of review for the syscall
>>>>>> API, perhaps you could take a look and ensure that the current
>>>>>> proposed API works for what you are envisioning with Landlock?
>>>>>>
>>>>> Which review/patch to look for the proposed API ?
>>>> https://lore.kernel.org/lkml/20230428203417.159874-3-casey@schaufler-ca.com/T/
>>>>
>>>>
>>> How easy is it to add a customized LSM with new APIs?
>>> I'm asking because there are some hard-coded constant/macro, i.e.
>> I guess this question is related to the Chromium OS LSM right? I think
>> this would be a good opportunity to think about mainlining this LSM to
>> avoid the hassle of dealing with LSM IDs.
>>
> Yes :-)
> I agree it is good to think about upstream, there are things chromeOS
> did that can be beneficial to the main. At the same time, part of it
> might never be accepted by upstream because it is chromeOS specific,
> so those need to be cleaned up.
Perhaps, but look at what's been done with SELinux in support of Android.
You don't believe that the binder LSM hooks are for any other purpose, do
you? You'll never know what turns out to be acceptable unless you give it
a try.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-23 6:13 ` Jeff Xu
2023-05-23 15:32 ` Casey Schaufler
@ 2023-05-23 21:12 ` Paul Moore
2023-05-24 15:38 ` Mickaël Salaün
1 sibling, 1 reply; 32+ messages in thread
From: Paul Moore @ 2023-05-23 21:12 UTC (permalink / raw)
To: Jeff Xu
Cc: Casey Schaufler, Shervin Oloumi, mic, linux-security-module,
jorgelo, keescook, groeck, allenwebb, gnoack3000, areber, criu,
linux-api, jannh, brauner
On Tue, May 23, 2023 at 2:13 AM Jeff Xu <jeffxu@chromium.org> wrote:
> On Mon, May 22, 2023 at 12:56 PM Paul Moore <paul@paul-moore.com> wrote:
> > On Thu, May 18, 2023 at 5:26 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
> > > On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
> > > > Adds a new getprocattr hook function to the Landlock LSM, which tracks
> > > > the landlocked state of the process. This is invoked when user-space
> > > > reads /proc/[pid]/attr/domain
> > >
> > > Please don't add a Landlock specific entry directly in the attr/
> > > directory. Add it only to attr/landlock.
> > >
> > > Also be aware that the LSM maintainer (Paul Moore) wants to move
> > > away from the /proc/.../attr interfaces in favor of a new system call,
> > > which is in review.
> >
> > What Casey said above.
> >
> > There is still some uncertainty around timing, and if we're perfectly
> > honest, acceptance of the new syscalls at the Linus level, but yes, I
> > would very much like to see the LSM infrastructure move away from
> > procfs and towards a syscall API. Part of the reasoning is that the
> > current procfs API is ill-suited to handle the multiple, stacked LSMs
> > and the other part being the complexity of procfs in a namespaced
> > system. If the syscall API is ultimately rejected, we will need to
> > revisit the idea of a procfs API, but even then I think we'll need to
> > make some changes to the current approach.
> >
> > As I believe we are in the latter stages of review for the syscall
> > API, perhaps you could take a look and ensure that the current
> > proposed API works for what you are envisioning with Landlock?
> >
> Which review/patch to look for the proposed API ?
See Casey's reply if you haven't already. You can also find the LSM
list archived on lore.kernel.org; that is probably the best way to
track LSM development if you don't want to subscribe to the list.
* https://lore.kernel.org/linux-security-module
> I guess ChromeOS will need to backport to 5.10 when the proposal is accepted.
Maybe? Distro specific backports aren't generally on-topic for the
upstream Linux mailing lists, especially large commercial distros with
plenty of developers to take care of things like that.
--
paul-moore.com
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-23 21:12 ` Paul Moore
@ 2023-05-24 15:38 ` Mickaël Salaün
2023-05-24 16:02 ` Mickaël Salaün
0 siblings, 1 reply; 32+ messages in thread
From: Mickaël Salaün @ 2023-05-24 15:38 UTC (permalink / raw)
To: Paul Moore, Jeff Xu
Cc: Casey Schaufler, Shervin Oloumi, linux-security-module, jorgelo,
keescook, groeck, allenwebb, gnoack3000, areber, criu, linux-api,
jannh, brauner
On 23/05/2023 23:12, Paul Moore wrote:
> On Tue, May 23, 2023 at 2:13 AM Jeff Xu <jeffxu@chromium.org> wrote:
>> On Mon, May 22, 2023 at 12:56 PM Paul Moore <paul@paul-moore.com> wrote:
>>> On Thu, May 18, 2023 at 5:26 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>>>> On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
>>>>> Adds a new getprocattr hook function to the Landlock LSM, which tracks
>>>>> the landlocked state of the process. This is invoked when user-space
>>>>> reads /proc/[pid]/attr/domain
>>>>
>>>> Please don't add a Landlock specific entry directly in the attr/
>>>> directory. Add it only to attr/landlock.
>>>>
>>>> Also be aware that the LSM maintainer (Paul Moore) wants to move
>>>> away from the /proc/.../attr interfaces in favor of a new system call,
>>>> which is in review.
>>>
>>> What Casey said above.
>>>
>>> There is still some uncertainty around timing, and if we're perfectly
>>> honest, acceptance of the new syscalls at the Linus level, but yes, I
>>> would very much like to see the LSM infrastructure move away from
>>> procfs and towards a syscall API. Part of the reasoning is that the
>>> current procfs API is ill-suited to handle the multiple, stacked LSMs
>>> and the other part being the complexity of procfs in a namespaced
>>> system. If the syscall API is ultimately rejected, we will need to
>>> revisit the idea of a procfs API, but even then I think we'll need to
>>> make some changes to the current approach.
>>>
>>> As I believe we are in the latter stages of review for the syscall
>>> API, perhaps you could take a look and ensure that the current
>>> proposed API works for what you are envisioning with Landlock?
I agree, and since the LSM syscalls are almost ready that should not
change much the timing. In fact, extending these syscalls might be
easier than tweaking the current procfs/attr API for Landlock specific
requirements (e.g. scoped visibility). We should ensure that these
syscalls would be a good fit to return file descriptors, but in the
short term we only need to know if a process is landlocked or not, so a
raw return value (0 or -errno) will be enough.
Mentioning in the LSM syscalls patch series that they may deal with (and
return) file descriptors could help API reviewers though.
>>>
>> Which review/patch to look for the proposed API ?
>
> See Casey's reply if you haven't already. You can also find the LSM
> list archived on lore.kernel.org; that is probably the best way to
> track LSM development if you don't want to subscribe to the list.
>
> * https://lore.kernel.org/linux-security-module
>
>> I guess ChromeOS will need to backport to 5.10 when the proposal is accepted.
>
> Maybe? Distro specific backports aren't generally on-topic for the
> upstream Linux mailing lists, especially large commercial distros with
> plenty of developers to take care of things like that.
>
Backporting the LSM syscall patch series will create conflicts but they
should be manageable and the series should be quite standalone. You'll
need to understand the changes to get a clean backport, so reviewing the
current proposal is a good opportunity to be ready and to catch
potential future issues.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-24 15:38 ` Mickaël Salaün
@ 2023-05-24 16:02 ` Mickaël Salaün
2023-05-25 16:28 ` Casey Schaufler
0 siblings, 1 reply; 32+ messages in thread
From: Mickaël Salaün @ 2023-05-24 16:02 UTC (permalink / raw)
To: Paul Moore, Jeff Xu
Cc: Casey Schaufler, Shervin Oloumi, linux-security-module, jorgelo,
keescook, groeck, allenwebb, gnoack3000, areber, criu, linux-api,
jannh, brauner
On 24/05/2023 17:38, Mickaël Salaün wrote:
>
> On 23/05/2023 23:12, Paul Moore wrote:
>> On Tue, May 23, 2023 at 2:13 AM Jeff Xu <jeffxu@chromium.org> wrote:
>>> On Mon, May 22, 2023 at 12:56 PM Paul Moore <paul@paul-moore.com> wrote:
>>>> On Thu, May 18, 2023 at 5:26 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>>>>> On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
>>>>>> Adds a new getprocattr hook function to the Landlock LSM, which tracks
>>>>>> the landlocked state of the process. This is invoked when user-space
>>>>>> reads /proc/[pid]/attr/domain
>>>>>
>>>>> Please don't add a Landlock specific entry directly in the attr/
>>>>> directory. Add it only to attr/landlock.
>>>>>
>>>>> Also be aware that the LSM maintainer (Paul Moore) wants to move
>>>>> away from the /proc/.../attr interfaces in favor of a new system call,
>>>>> which is in review.
>>>>
>>>> What Casey said above.
>>>>
>>>> There is still some uncertainty around timing, and if we're perfectly
>>>> honest, acceptance of the new syscalls at the Linus level, but yes, I
>>>> would very much like to see the LSM infrastructure move away from
>>>> procfs and towards a syscall API. Part of the reasoning is that the
>>>> current procfs API is ill-suited to handle the multiple, stacked LSMs
>>>> and the other part being the complexity of procfs in a namespaced
>>>> system. If the syscall API is ultimately rejected, we will need to
>>>> revisit the idea of a procfs API, but even then I think we'll need to
>>>> make some changes to the current approach.
>>>>
>>>> As I believe we are in the latter stages of review for the syscall
>>>> API, perhaps you could take a look and ensure that the current
>>>> proposed API works for what you are envisioning with Landlock?
>
> I agree, and since the LSM syscalls are almost ready that should not
> change much the timing. In fact, extending these syscalls might be
> easier than tweaking the current procfs/attr API for Landlock specific
> requirements (e.g. scoped visibility). We should ensure that these
> syscalls would be a good fit to return file descriptors, but in the
> short term we only need to know if a process is landlocked or not, so a
> raw return value (0 or -errno) will be enough.
>
> Mentioning in the LSM syscalls patch series that they may deal with (and
> return) file descriptors could help API reviewers though.
It should be kept in mind that the current LSM syscalls only deal with
the calling task, whereas the goal of this Landlock patch series is to
inspect other tasks. A new LSM syscall would need to be created to
handle pidfd e.g., named lsm_get_proc_attr() or lsm_get_pid_attr().
I'm not sure if this should be a generic LSM syscall or a Landlock
syscall though. I have plan to handle processes other than the caller
(e.g. to restrict an existing process hierarchy), so thinking about a
Landlock-specific syscall could make sense.
To summarize, creating a new LSM syscall to deal with pidfd and to get
LSM process "status/attr" looks OK. However, Landlock-specific syscalls
to deal with Landlock specificities (e.g. ruleset or domain file
descriptor) make more sense.
Having one LSM-generic syscall to get minimal Landlock attributes (i.e.
mainly to know if a process is sandboxed), and another Landlock-specific
syscall to do more things (e.g. get the domain file descriptor, restrict
a task) seems reasonable. The second one would overlap with the first
one though. What do you think?
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-24 16:02 ` Mickaël Salaün
@ 2023-05-25 16:28 ` Casey Schaufler
2023-05-30 18:05 ` Jeff Xu
0 siblings, 1 reply; 32+ messages in thread
From: Casey Schaufler @ 2023-05-25 16:28 UTC (permalink / raw)
To: Mickaël Salaün, Paul Moore, Jeff Xu
Cc: Shervin Oloumi, linux-security-module, jorgelo, keescook, groeck,
allenwebb, gnoack3000, areber, criu, linux-api, jannh, brauner,
Casey Schaufler
On 5/24/2023 9:02 AM, Mickaël Salaün wrote:
>
> On 24/05/2023 17:38, Mickaël Salaün wrote:
>>
>> On 23/05/2023 23:12, Paul Moore wrote:
>>> On Tue, May 23, 2023 at 2:13 AM Jeff Xu <jeffxu@chromium.org> wrote:
>>>> On Mon, May 22, 2023 at 12:56 PM Paul Moore <paul@paul-moore.com>
>>>> wrote:
>>>>> On Thu, May 18, 2023 at 5:26 PM Casey Schaufler
>>>>> <casey@schaufler-ca.com> wrote:
>>>>>> On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
>>>>>>> Adds a new getprocattr hook function to the Landlock LSM, which
>>>>>>> tracks
>>>>>>> the landlocked state of the process. This is invoked when
>>>>>>> user-space
>>>>>>> reads /proc/[pid]/attr/domain
>>>>>>
>>>>>> Please don't add a Landlock specific entry directly in the attr/
>>>>>> directory. Add it only to attr/landlock.
>>>>>>
>>>>>> Also be aware that the LSM maintainer (Paul Moore) wants to move
>>>>>> away from the /proc/.../attr interfaces in favor of a new system
>>>>>> call,
>>>>>> which is in review.
>>>>>
>>>>> What Casey said above.
>>>>>
>>>>> There is still some uncertainty around timing, and if we're perfectly
>>>>> honest, acceptance of the new syscalls at the Linus level, but yes, I
>>>>> would very much like to see the LSM infrastructure move away from
>>>>> procfs and towards a syscall API. Part of the reasoning is that the
>>>>> current procfs API is ill-suited to handle the multiple, stacked LSMs
>>>>> and the other part being the complexity of procfs in a namespaced
>>>>> system. If the syscall API is ultimately rejected, we will need to
>>>>> revisit the idea of a procfs API, but even then I think we'll need to
>>>>> make some changes to the current approach.
>>>>>
>>>>> As I believe we are in the latter stages of review for the syscall
>>>>> API, perhaps you could take a look and ensure that the current
>>>>> proposed API works for what you are envisioning with Landlock?
>>
>> I agree, and since the LSM syscalls are almost ready that should not
>> change much the timing. In fact, extending these syscalls might be
>> easier than tweaking the current procfs/attr API for Landlock specific
>> requirements (e.g. scoped visibility). We should ensure that these
>> syscalls would be a good fit to return file descriptors, but in the
>> short term we only need to know if a process is landlocked or not, so a
>> raw return value (0 or -errno) will be enough.
>>
>> Mentioning in the LSM syscalls patch series that they may deal with (and
>> return) file descriptors could help API reviewers though.
>
> It should be kept in mind that the current LSM syscalls only deal with
> the calling task, whereas the goal of this Landlock patch series is to
> inspect other tasks. A new LSM syscall would need to be created to
> handle pidfd e.g., named lsm_get_proc_attr() or lsm_get_pid_attr().
I think it would be lsm_get_pid_attr(). Yes, it's the obvious next step.
>
> I'm not sure if this should be a generic LSM syscall or a Landlock
> syscall though. I have plan to handle processes other than the caller
> (e.g. to restrict an existing process hierarchy), so thinking about a
> Landlock-specific syscall could make sense.
>
> To summarize, creating a new LSM syscall to deal with pidfd and to get
> LSM process "status/attr" looks OK. However, Landlock-specific
> syscalls to deal with Landlock specificities (e.g. ruleset or domain
> file descriptor) make more sense.
>
> Having one LSM-generic syscall to get minimal Landlock attributes
> (i.e. mainly to know if a process is sandboxed), and another
> Landlock-specific syscall to do more things (e.g. get the domain file
> descriptor, restrict a task) seems reasonable. The second one would
> overlap with the first one though. What do you think?
I find it difficult to think of a file descriptor as an attribute of
a process. To my (somewhat unorthodox) thinking a file descriptor is
a name for an object, not an attribute of the object. You can't access
an object by its attributes, but you can by its name. An attribute is
a description of the object. I'm perfectly happy with lsm_get_pid_attr()
returning an attribute that is a file descriptor if it describes the
process in some way, but not as a substitute for opening /proc/42.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-25 16:28 ` Casey Schaufler
@ 2023-05-30 18:05 ` Jeff Xu
2023-05-30 19:19 ` Casey Schaufler
0 siblings, 1 reply; 32+ messages in thread
From: Jeff Xu @ 2023-05-30 18:05 UTC (permalink / raw)
To: Casey Schaufler
Cc: Mickaël Salaün, Paul Moore, Shervin Oloumi,
linux-security-module, jorgelo, keescook, groeck, allenwebb,
gnoack3000, areber, criu, linux-api, jannh, brauner
On Thu, May 25, 2023 at 9:28 AM Casey Schaufler <casey@schaufler-ca.com> wrote:
>
> On 5/24/2023 9:02 AM, Mickaël Salaün wrote:
> >
> > On 24/05/2023 17:38, Mickaël Salaün wrote:
> >>
> >> On 23/05/2023 23:12, Paul Moore wrote:
> >>> On Tue, May 23, 2023 at 2:13 AM Jeff Xu <jeffxu@chromium.org> wrote:
> >>>> On Mon, May 22, 2023 at 12:56 PM Paul Moore <paul@paul-moore.com>
> >>>> wrote:
> >>>>> On Thu, May 18, 2023 at 5:26 PM Casey Schaufler
> >>>>> <casey@schaufler-ca.com> wrote:
> >>>>>> On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
> >>>>>>> Adds a new getprocattr hook function to the Landlock LSM, which
> >>>>>>> tracks
> >>>>>>> the landlocked state of the process. This is invoked when
> >>>>>>> user-space
> >>>>>>> reads /proc/[pid]/attr/domain
> >>>>>>
> >>>>>> Please don't add a Landlock specific entry directly in the attr/
> >>>>>> directory. Add it only to attr/landlock.
> >>>>>>
> >>>>>> Also be aware that the LSM maintainer (Paul Moore) wants to move
> >>>>>> away from the /proc/.../attr interfaces in favor of a new system
> >>>>>> call,
> >>>>>> which is in review.
> >>>>>
> >>>>> What Casey said above.
> >>>>>
> >>>>> There is still some uncertainty around timing, and if we're perfectly
> >>>>> honest, acceptance of the new syscalls at the Linus level, but yes, I
> >>>>> would very much like to see the LSM infrastructure move away from
> >>>>> procfs and towards a syscall API. Part of the reasoning is that the
> >>>>> current procfs API is ill-suited to handle the multiple, stacked LSMs
> >>>>> and the other part being the complexity of procfs in a namespaced
> >>>>> system. If the syscall API is ultimately rejected, we will need to
> >>>>> revisit the idea of a procfs API, but even then I think we'll need to
> >>>>> make some changes to the current approach.
> >>>>>
> >>>>> As I believe we are in the latter stages of review for the syscall
> >>>>> API, perhaps you could take a look and ensure that the current
> >>>>> proposed API works for what you are envisioning with Landlock?
> >>
> >> I agree, and since the LSM syscalls are almost ready that should not
> >> change much the timing. In fact, extending these syscalls might be
> >> easier than tweaking the current procfs/attr API for Landlock specific
> >> requirements (e.g. scoped visibility). We should ensure that these
> >> syscalls would be a good fit to return file descriptors, but in the
> >> short term we only need to know if a process is landlocked or not, so a
> >> raw return value (0 or -errno) will be enough.
> >>
> >> Mentioning in the LSM syscalls patch series that they may deal with (and
> >> return) file descriptors could help API reviewers though.
> >
> > It should be kept in mind that the current LSM syscalls only deal with
> > the calling task, whereas the goal of this Landlock patch series is to
> > inspect other tasks. A new LSM syscall would need to be created to
> > handle pidfd e.g., named lsm_get_proc_attr() or lsm_get_pid_attr().
>
> I think it would be lsm_get_pid_attr(). Yes, it's the obvious next step.
>
> >
> > I'm not sure if this should be a generic LSM syscall or a Landlock
> > syscall though. I have plan to handle processes other than the caller
> > (e.g. to restrict an existing process hierarchy), so thinking about a
> > Landlock-specific syscall could make sense.
> >
> > To summarize, creating a new LSM syscall to deal with pidfd and to get
> > LSM process "status/attr" looks OK. However, Landlock-specific
> > syscalls to deal with Landlock specificities (e.g. ruleset or domain
> > file descriptor) make more sense.
> >
> > Having one LSM-generic syscall to get minimal Landlock attributes
> > (i.e. mainly to know if a process is sandboxed), and another
> > Landlock-specific syscall to do more things (e.g. get the domain file
> > descriptor, restrict a task) seems reasonable. The second one would
> > overlap with the first one though. What do you think?
>
> I find it difficult to think of a file descriptor as an attribute of
> a process. To my (somewhat unorthodox) thinking a file descriptor is
> a name for an object, not an attribute of the object. You can't access
> an object by its attributes, but you can by its name. An attribute is
> a description of the object. I'm perfectly happy with lsm_get_pid_attr()
> returning an attribute that is a file descriptor if it describes the
> process in some way, but not as a substitute for opening /proc/42.
>
>
If I understand correctly:
1> A new lsm syscall - lsm_get_pid_attr(): Landlock will return the
process's landlock sandbox status: true/false.
Is this a right fit for SELinux to also return the process's enforcing
mode ? such as enforcing/permissive.
2> Landlock will have its own specific syscall to deal with Landlock
specificities (e.g. ruleset or domain file descriptor).
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-30 18:05 ` Jeff Xu
@ 2023-05-30 19:19 ` Casey Schaufler
2023-05-31 13:26 ` Mickaël Salaün
0 siblings, 1 reply; 32+ messages in thread
From: Casey Schaufler @ 2023-05-30 19:19 UTC (permalink / raw)
To: Jeff Xu
Cc: Mickaël Salaün, Paul Moore, Shervin Oloumi,
linux-security-module, jorgelo, keescook, groeck, allenwebb,
gnoack3000, areber, criu, linux-api, jannh, brauner,
Casey Schaufler
On 5/30/2023 11:05 AM, Jeff Xu wrote:
> On Thu, May 25, 2023 at 9:28 AM Casey Schaufler <casey@schaufler-ca.com> wrote:
>> On 5/24/2023 9:02 AM, Mickaël Salaün wrote:
>>> On 24/05/2023 17:38, Mickaël Salaün wrote:
>>>> On 23/05/2023 23:12, Paul Moore wrote:
>>>>> On Tue, May 23, 2023 at 2:13 AM Jeff Xu <jeffxu@chromium.org> wrote:
>>>>>> On Mon, May 22, 2023 at 12:56 PM Paul Moore <paul@paul-moore.com>
>>>>>> wrote:
>>>>>>> On Thu, May 18, 2023 at 5:26 PM Casey Schaufler
>>>>>>> <casey@schaufler-ca.com> wrote:
>>>>>>>> On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
>>>>>>>>> Adds a new getprocattr hook function to the Landlock LSM, which
>>>>>>>>> tracks
>>>>>>>>> the landlocked state of the process. This is invoked when
>>>>>>>>> user-space
>>>>>>>>> reads /proc/[pid]/attr/domain
>>>>>>>> Please don't add a Landlock specific entry directly in the attr/
>>>>>>>> directory. Add it only to attr/landlock.
>>>>>>>>
>>>>>>>> Also be aware that the LSM maintainer (Paul Moore) wants to move
>>>>>>>> away from the /proc/.../attr interfaces in favor of a new system
>>>>>>>> call,
>>>>>>>> which is in review.
>>>>>>> What Casey said above.
>>>>>>>
>>>>>>> There is still some uncertainty around timing, and if we're perfectly
>>>>>>> honest, acceptance of the new syscalls at the Linus level, but yes, I
>>>>>>> would very much like to see the LSM infrastructure move away from
>>>>>>> procfs and towards a syscall API. Part of the reasoning is that the
>>>>>>> current procfs API is ill-suited to handle the multiple, stacked LSMs
>>>>>>> and the other part being the complexity of procfs in a namespaced
>>>>>>> system. If the syscall API is ultimately rejected, we will need to
>>>>>>> revisit the idea of a procfs API, but even then I think we'll need to
>>>>>>> make some changes to the current approach.
>>>>>>>
>>>>>>> As I believe we are in the latter stages of review for the syscall
>>>>>>> API, perhaps you could take a look and ensure that the current
>>>>>>> proposed API works for what you are envisioning with Landlock?
>>>> I agree, and since the LSM syscalls are almost ready that should not
>>>> change much the timing. In fact, extending these syscalls might be
>>>> easier than tweaking the current procfs/attr API for Landlock specific
>>>> requirements (e.g. scoped visibility). We should ensure that these
>>>> syscalls would be a good fit to return file descriptors, but in the
>>>> short term we only need to know if a process is landlocked or not, so a
>>>> raw return value (0 or -errno) will be enough.
>>>>
>>>> Mentioning in the LSM syscalls patch series that they may deal with (and
>>>> return) file descriptors could help API reviewers though.
>>> It should be kept in mind that the current LSM syscalls only deal with
>>> the calling task, whereas the goal of this Landlock patch series is to
>>> inspect other tasks. A new LSM syscall would need to be created to
>>> handle pidfd e.g., named lsm_get_proc_attr() or lsm_get_pid_attr().
>> I think it would be lsm_get_pid_attr(). Yes, it's the obvious next step.
>>
>>> I'm not sure if this should be a generic LSM syscall or a Landlock
>>> syscall though. I have plan to handle processes other than the caller
>>> (e.g. to restrict an existing process hierarchy), so thinking about a
>>> Landlock-specific syscall could make sense.
>>>
>>> To summarize, creating a new LSM syscall to deal with pidfd and to get
>>> LSM process "status/attr" looks OK. However, Landlock-specific
>>> syscalls to deal with Landlock specificities (e.g. ruleset or domain
>>> file descriptor) make more sense.
>>>
>>> Having one LSM-generic syscall to get minimal Landlock attributes
>>> (i.e. mainly to know if a process is sandboxed), and another
>>> Landlock-specific syscall to do more things (e.g. get the domain file
>>> descriptor, restrict a task) seems reasonable. The second one would
>>> overlap with the first one though. What do you think?
>> I find it difficult to think of a file descriptor as an attribute of
>> a process. To my (somewhat unorthodox) thinking a file descriptor is
>> a name for an object, not an attribute of the object. You can't access
>> an object by its attributes, but you can by its name. An attribute is
>> a description of the object. I'm perfectly happy with lsm_get_pid_attr()
>> returning an attribute that is a file descriptor if it describes the
>> process in some way, but not as a substitute for opening /proc/42.
>>
>>
> If I understand correctly:
> 1> A new lsm syscall - lsm_get_pid_attr(): Landlock will return the
> process's landlock sandbox status: true/false.
There would have to be a new LSM_ATTR_ENFORCMENT to query.
Each LSM could then report what, if any, value it choose to.
I can't say whether SELinux would take advantage of this.
I don't see that Smack would report this attribute.
>
> Is this a right fit for SELinux to also return the process's enforcing
> mode ? such as enforcing/permissive.
>
> 2> Landlock will have its own specific syscall to deal with Landlock
> specificities (e.g. ruleset or domain file descriptor).
I don't see how a syscall to load arbitrary LSM policy (e.g. landlock ruleset,
Smack rules) would behave, so each LSM is on it's own regarding that. I doubt
that the VFS crowd would be especially keen on an LSM creating file descriptors,
but stranger things have happened.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-30 19:19 ` Casey Schaufler
@ 2023-05-31 13:26 ` Mickaël Salaün
2023-06-01 20:48 ` Jeff Xu
0 siblings, 1 reply; 32+ messages in thread
From: Mickaël Salaün @ 2023-05-31 13:26 UTC (permalink / raw)
To: Casey Schaufler, Jeff Xu, Paul Moore
Cc: Shervin Oloumi, linux-security-module, jorgelo, keescook, groeck,
allenwebb, gnoack3000, areber, criu, linux-api, jannh, brauner
On 30/05/2023 21:19, Casey Schaufler wrote:
> On 5/30/2023 11:05 AM, Jeff Xu wrote:
>> On Thu, May 25, 2023 at 9:28 AM Casey Schaufler <casey@schaufler-ca.com> wrote:
>>> On 5/24/2023 9:02 AM, Mickaël Salaün wrote:
>>>> On 24/05/2023 17:38, Mickaël Salaün wrote:
>>>>> On 23/05/2023 23:12, Paul Moore wrote:
>>>>>> On Tue, May 23, 2023 at 2:13 AM Jeff Xu <jeffxu@chromium.org> wrote:
>>>>>>> On Mon, May 22, 2023 at 12:56 PM Paul Moore <paul@paul-moore.com>
>>>>>>> wrote:
>>>>>>>> On Thu, May 18, 2023 at 5:26 PM Casey Schaufler
>>>>>>>> <casey@schaufler-ca.com> wrote:
>>>>>>>>> On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
>>>>>>>>>> Adds a new getprocattr hook function to the Landlock LSM, which
>>>>>>>>>> tracks
>>>>>>>>>> the landlocked state of the process. This is invoked when
>>>>>>>>>> user-space
>>>>>>>>>> reads /proc/[pid]/attr/domain
>>>>>>>>> Please don't add a Landlock specific entry directly in the attr/
>>>>>>>>> directory. Add it only to attr/landlock.
>>>>>>>>>
>>>>>>>>> Also be aware that the LSM maintainer (Paul Moore) wants to move
>>>>>>>>> away from the /proc/.../attr interfaces in favor of a new system
>>>>>>>>> call,
>>>>>>>>> which is in review.
>>>>>>>> What Casey said above.
>>>>>>>>
>>>>>>>> There is still some uncertainty around timing, and if we're perfectly
>>>>>>>> honest, acceptance of the new syscalls at the Linus level, but yes, I
>>>>>>>> would very much like to see the LSM infrastructure move away from
>>>>>>>> procfs and towards a syscall API. Part of the reasoning is that the
>>>>>>>> current procfs API is ill-suited to handle the multiple, stacked LSMs
>>>>>>>> and the other part being the complexity of procfs in a namespaced
>>>>>>>> system. If the syscall API is ultimately rejected, we will need to
>>>>>>>> revisit the idea of a procfs API, but even then I think we'll need to
>>>>>>>> make some changes to the current approach.
>>>>>>>>
>>>>>>>> As I believe we are in the latter stages of review for the syscall
>>>>>>>> API, perhaps you could take a look and ensure that the current
>>>>>>>> proposed API works for what you are envisioning with Landlock?
>>>>> I agree, and since the LSM syscalls are almost ready that should not
>>>>> change much the timing. In fact, extending these syscalls might be
>>>>> easier than tweaking the current procfs/attr API for Landlock specific
>>>>> requirements (e.g. scoped visibility). We should ensure that these
>>>>> syscalls would be a good fit to return file descriptors, but in the
>>>>> short term we only need to know if a process is landlocked or not, so a
>>>>> raw return value (0 or -errno) will be enough.
>>>>>
>>>>> Mentioning in the LSM syscalls patch series that they may deal with (and
>>>>> return) file descriptors could help API reviewers though.
>>>> It should be kept in mind that the current LSM syscalls only deal with
>>>> the calling task, whereas the goal of this Landlock patch series is to
>>>> inspect other tasks. A new LSM syscall would need to be created to
>>>> handle pidfd e.g., named lsm_get_proc_attr() or lsm_get_pid_attr().
>>> I think it would be lsm_get_pid_attr(). Yes, it's the obvious next step.
>>>
>>>> I'm not sure if this should be a generic LSM syscall or a Landlock
>>>> syscall though. I have plan to handle processes other than the caller
>>>> (e.g. to restrict an existing process hierarchy), so thinking about a
>>>> Landlock-specific syscall could make sense.
>>>>
>>>> To summarize, creating a new LSM syscall to deal with pidfd and to get
>>>> LSM process "status/attr" looks OK. However, Landlock-specific
>>>> syscalls to deal with Landlock specificities (e.g. ruleset or domain
>>>> file descriptor) make more sense.
>>>>
>>>> Having one LSM-generic syscall to get minimal Landlock attributes
>>>> (i.e. mainly to know if a process is sandboxed), and another
>>>> Landlock-specific syscall to do more things (e.g. get the domain file
>>>> descriptor, restrict a task) seems reasonable. The second one would
>>>> overlap with the first one though. What do you think?
>>> I find it difficult to think of a file descriptor as an attribute of
>>> a process. To my (somewhat unorthodox) thinking a file descriptor is
>>> a name for an object, not an attribute of the object. You can't access
>>> an object by its attributes, but you can by its name. An attribute is
>>> a description of the object. I'm perfectly happy with lsm_get_pid_attr()
>>> returning an attribute that is a file descriptor if it describes the
>>> process in some way, but not as a substitute for opening /proc/42.
We're talking about two kind of file descriptor. First, pidfd which is a
file descriptor referring to a task, so yes pretty similar to /proc/42 .
Second, a Landlock domain file descriptor, referring to a Landlock
domain which contains a set of processes, similar to cgroups.
A potential landlock_get_domain() syscall would take a pidfd as argument
and return a Landlock domain file descriptor. I think lsm_get_pid_attr()
would be better to always return raw data (current attribute values),
which is simpler and make sure a syscall only return the same types.
This would be type safe and avoid issues where file descriptors would be
leaked of misused.
>>>
>>>
>> If I understand correctly:
>> 1> A new lsm syscall - lsm_get_pid_attr(): Landlock will return the
>> process's landlock sandbox status: true/false.
>
> There would have to be a new LSM_ATTR_ENFORCMENT to query.
> Each LSM could then report what, if any, value it choose to.
> I can't say whether SELinux would take advantage of this.
> I don't see that Smack would report this attribute.
I think such returned status for LSM_ATTR_ENFORCMENT query would make
sense, but the syscall could also return -EPERM and other error codes.
>
>>
>> Is this a right fit for SELinux to also return the process's enforcing
>> mode ? such as enforcing/permissive.
Paul could answer that, but I think it would be simpler to have two
different queries, something like LSM_ATTR_ENFORCMENT and
LSM_ATTR_PERMISSIVE queries.
>>
>> 2> Landlock will have its own specific syscall to deal with Landlock
>> specificities (e.g. ruleset or domain file descriptor).
>
> I don't see how a syscall to load arbitrary LSM policy (e.g. landlock ruleset,
> Smack rules) would behave, so each LSM is on it's own regarding that.
I agree, Landlock-specific file descriptors should managed by
Landlock-specific syscalls.
> I doubt
> that the VFS crowd would be especially keen on an LSM creating file descriptors,
> but stranger things have happened.
This is already the case with Landlock rulesets, so no issue with that.
File descriptors are more and more used nowadays and it's a good thing.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-31 13:26 ` Mickaël Salaün
@ 2023-06-01 20:48 ` Jeff Xu
2023-06-01 21:34 ` Casey Schaufler
0 siblings, 1 reply; 32+ messages in thread
From: Jeff Xu @ 2023-06-01 20:48 UTC (permalink / raw)
To: Mickaël Salaün
Cc: Casey Schaufler, Paul Moore, Shervin Oloumi,
linux-security-module, jorgelo, keescook, groeck, allenwebb,
gnoack3000, areber, criu, linux-api, jannh, brauner
Hi Paul,
On Wed, May 31, 2023 at 6:26 AM Mickaël Salaün <mic@digikod.net> wrote:
> >>>
> >>>
> >> If I understand correctly:
> >> 1> A new lsm syscall - lsm_get_pid_attr(): Landlock will return the
> >> process's landlock sandbox status: true/false.
> >
> > There would have to be a new LSM_ATTR_ENFORCMENT to query.
> > Each LSM could then report what, if any, value it choose to.
> > I can't say whether SELinux would take advantage of this.
> > I don't see that Smack would report this attribute.
>
> I think such returned status for LSM_ATTR_ENFORCMENT query would make
> sense, but the syscall could also return -EPERM and other error codes.
>
>
> >
> >>
> >> Is this a right fit for SELinux to also return the process's enforcing
> >> mode ? such as enforcing/permissive.
>
> Paul could answer that, but I think it would be simpler to have two
> different queries, something like LSM_ATTR_ENFORCMENT and
> LSM_ATTR_PERMISSIVE queries.
>
Hi Paul, what do you think ? Could SELinux have something like this.
Thanks!
-Jeff
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-06-01 20:48 ` Jeff Xu
@ 2023-06-01 21:34 ` Casey Schaufler
2023-06-01 22:08 ` Mickaël Salaün
0 siblings, 1 reply; 32+ messages in thread
From: Casey Schaufler @ 2023-06-01 21:34 UTC (permalink / raw)
To: Jeff Xu, Mickaël Salaün
Cc: Paul Moore, Shervin Oloumi, linux-security-module, jorgelo,
keescook, groeck, allenwebb, gnoack3000, areber, criu, linux-api,
jannh, brauner, Casey Schaufler
On 6/1/2023 1:48 PM, Jeff Xu wrote:
> Hi Paul,
>
> On Wed, May 31, 2023 at 6:26 AM Mickaël Salaün <mic@digikod.net> wrote:
>>>>>
>>>> If I understand correctly:
>>>> 1> A new lsm syscall - lsm_get_pid_attr(): Landlock will return the
>>>> process's landlock sandbox status: true/false.
>>> There would have to be a new LSM_ATTR_ENFORCMENT to query.
>>> Each LSM could then report what, if any, value it choose to.
>>> I can't say whether SELinux would take advantage of this.
>>> I don't see that Smack would report this attribute.
>> I think such returned status for LSM_ATTR_ENFORCMENT query would make
>> sense, but the syscall could also return -EPERM and other error codes.
>>
>>
>>>> Is this a right fit for SELinux to also return the process's enforcing
>>>> mode ? such as enforcing/permissive.
>> Paul could answer that, but I think it would be simpler to have two
>> different queries, something like LSM_ATTR_ENFORCMENT and
>> LSM_ATTR_PERMISSIVE queries.
>>
> Hi Paul, what do you think ? Could SELinux have something like this.
Not Paul, but answering anyway - No, those are system wide attributes, not
process (task) attributes. You want some other syscall, say lsm_get_system_attr()
for those.
>
> Thanks!
> -Jeff
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-06-01 21:34 ` Casey Schaufler
@ 2023-06-01 22:08 ` Mickaël Salaün
0 siblings, 0 replies; 32+ messages in thread
From: Mickaël Salaün @ 2023-06-01 22:08 UTC (permalink / raw)
To: Casey Schaufler, Jeff Xu
Cc: Paul Moore, Shervin Oloumi, linux-security-module, jorgelo,
keescook, groeck, allenwebb, gnoack3000, areber, criu, linux-api,
jannh, brauner
On 01/06/2023 23:34, Casey Schaufler wrote:
> On 6/1/2023 1:48 PM, Jeff Xu wrote:
>> Hi Paul,
>>
>> On Wed, May 31, 2023 at 6:26 AM Mickaël Salaün <mic@digikod.net> wrote:
>>>>>>
>>>>> If I understand correctly:
>>>>> 1> A new lsm syscall - lsm_get_pid_attr(): Landlock will return the
>>>>> process's landlock sandbox status: true/false.
>>>> There would have to be a new LSM_ATTR_ENFORCMENT to query.
I guess there is a misunderstanding. What is the link between global
system enforcement and the status of a sandboxed/restricted/enforced(?)
process?
The attribute would then be something like LSM_ATTR_RESTRICTED to get a
process restriction status, which might be the same for all processes
with system-wide policies (e.g., SELinux) but not for Landlock.
>>>> Each LSM could then report what, if any, value it choose to.
>>>> I can't say whether SELinux would take advantage of this.
>>>> I don't see that Smack would report this attribute.
>>> I think such returned status for LSM_ATTR_ENFORCMENT query would make
>>> sense, but the syscall could also return -EPERM and other error codes.
>>>
>>>
>>>>> Is this a right fit for SELinux to also return the process's enforcing
>>>>> mode ? such as enforcing/permissive.
>>> Paul could answer that, but I think it would be simpler to have two
>>> different queries, something like LSM_ATTR_ENFORCMENT and
>>> LSM_ATTR_PERMISSIVE queries.
>>>
>> Hi Paul, what do you think ? Could SELinux have something like this.
>
> Not Paul, but answering anyway - No, those are system wide attributes, not
> process (task) attributes. You want some other syscall, say lsm_get_system_attr()
> for those.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-18 21:26 ` Casey Schaufler
2023-05-22 19:56 ` Paul Moore
@ 2023-05-24 16:05 ` Mickaël Salaün
1 sibling, 0 replies; 32+ messages in thread
From: Mickaël Salaün @ 2023-05-24 16:05 UTC (permalink / raw)
To: Casey Schaufler, Shervin Oloumi
Cc: linux-security-module, jorgelo, keescook, groeck, jeffxu,
allenwebb, gnoack3000, areber, criu, linux-api, jannh, brauner
On 18/05/2023 23:26, Casey Schaufler wrote:
> On 5/18/2023 1:45 PM, Shervin Oloumi wrote:
>> Adds a new getprocattr hook function to the Landlock LSM, which tracks
>> the landlocked state of the process. This is invoked when user-space
>> reads /proc/[pid]/attr/domain
>
> Please don't add a Landlock specific entry directly in the attr/
> directory. Add it only to attr/landlock.
The commit message doesn't match the code, which creates attr/landlock.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-18 20:45 ` [PATCH v2] lsm: adds process attribute getter " Shervin Oloumi
2023-05-18 21:26 ` Casey Schaufler
@ 2023-05-19 5:22 ` kernel test robot
2023-05-24 16:48 ` Mickaël Salaün
2 siblings, 0 replies; 32+ messages in thread
From: kernel test robot @ 2023-05-19 5:22 UTC (permalink / raw)
To: Shervin Oloumi, mic
Cc: llvm, oe-kbuild-all, linux-security-module, jorgelo, keescook,
groeck, jeffxu, allenwebb, gnoack3000, areber, criu, linux-api,
jannh, brauner, Shervin Oloumi
[-- Attachment #1: Type: text/plain, Size: 7183 bytes --]
Hi Shervin,
kernel test robot noticed the following build warnings:
[auto build test WARNING on v6.3]
[cannot apply to kees/for-next/pstore kees/for-next/kspp linus/master v6.4-rc2 v6.4-rc1 next-20230519]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Shervin-Oloumi/lsm-adds-process-attribute-getter-for-Landlock/20230519-044656
base: 457391b0380335d5e9a5babdec90ac53928b23b4
patch link: https://lore.kernel.org/r/20230518204549.3139044-1-enlightened%40chromium.org
patch subject: [PATCH v2] lsm: adds process attribute getter for Landlock
config: hexagon-buildonly-randconfig-r006-20230517
compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project b0fb98227c90adf2536c9ad644a74d5e92961111)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/be54dbd52c1ad9e1f70d31e99d50d684b762d31a
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Shervin-Oloumi/lsm-adds-process-attribute-getter-for-Landlock/20230519-044656
git checkout be54dbd52c1ad9e1f70d31e99d50d684b762d31a
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon olddefconfig
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash security/
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202305191254.CZX71Zc0-lkp@intel.com/
All warnings (new ones prefixed by >>):
In file included from security/landlock/setup.c:14:
In file included from security/landlock/fs.h:16:
>> security/landlock/ptrace.h:14:1: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers]
const bool task_is_scoped(const struct task_struct *const parent,
^~~~~~
1 warning generated.
--
In file included from security/landlock/syscalls.c:24:
In file included from include/linux/syscalls.h:88:
In file included from include/trace/syscall.h:7:
In file included from include/linux/trace_events.h:9:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:334:
include/asm-generic/io.h:547:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __raw_readb(PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:560:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
^
In file included from security/landlock/syscalls.c:24:
In file included from include/linux/syscalls.h:88:
In file included from include/trace/syscall.h:7:
In file included from include/linux/trace_events.h:9:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:334:
include/asm-generic/io.h:573:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
^
In file included from security/landlock/syscalls.c:24:
In file included from include/linux/syscalls.h:88:
In file included from include/trace/syscall.h:7:
In file included from include/linux/trace_events.h:9:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:334:
include/asm-generic/io.h:584:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writeb(value, PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:594:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:604:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
~~~~~~~~~~ ^
In file included from security/landlock/syscalls.c:30:
In file included from security/landlock/fs.h:16:
>> security/landlock/ptrace.h:14:1: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers]
const bool task_is_scoped(const struct task_struct *const parent,
^~~~~~
7 warnings generated.
--
In file included from security/landlock/ptrace.c:19:
>> security/landlock/ptrace.h:14:1: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers]
const bool task_is_scoped(const struct task_struct *const parent,
^~~~~~
>> security/landlock/ptrace.c:50:1: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers]
const bool task_is_scoped(const struct task_struct *const parent,
^~~~~~
2 warnings generated.
vim +/const +14 security/landlock/ptrace.h
13
> 14 const bool task_is_scoped(const struct task_struct *const parent,
15 const struct task_struct *const child);
16
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 136769 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/hexagon 6.3.0 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 17.0.0 (git://gitmirror/llvm_project b0fb98227c90adf2536c9ad644a74d5e92961111)"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=170000
CONFIG_AS_IS_LLVM=y
CONFIG_AS_VERSION=170000
CONFIG_LD_VERSION=0
CONFIG_LD_IS_LLD=y
CONFIG_LLD_VERSION=170000
CONFIG_RUST_IS_AVAILABLE=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=125
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
CONFIG_BPF=y
#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
CONFIG_USERMODE_DRIVER=y
# end of BPF subsystem
CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=m
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_RD_ZSTD is not set
CONFIG_BOOT_CONFIG=y
# CONFIG_BOOT_CONFIG_FORCE is not set
# CONFIG_BOOT_CONFIG_EMBED is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
# CONFIG_PRINTK is not set
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_MEMBARRIER is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
# end of General setup
#
# Linux Kernel Configuration for Hexagon
#
CONFIG_HEXAGON=y
CONFIG_HEXAGON_PHYS_OFFSET=y
CONFIG_FRAME_POINTER=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_EARLY_PRINTK=y
CONFIG_MMU=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_BUG=y
#
# Machine selection
#
CONFIG_HEXAGON_COMET=y
CONFIG_HEXAGON_ARCH_VERSION=2
CONFIG_CMDLINE=""
CONFIG_SMP=y
CONFIG_NR_CPUS=6
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_PAGE_SIZE_256KB is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# end of Machine selection
#
# General architecture-dependent options
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_LTO_NONE=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_NO_PREEMPT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# end of GCOV-based kernel profiling
CONFIG_FUNCTION_ALIGNMENT=0
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS_NONE is not set
# CONFIG_MODULE_COMPRESS_GZIP is not set
CONFIG_MODULE_COMPRESS_XZ=y
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_DECOMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=m
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB_DEPRECATED is not set
# CONFIG_SLUB_TINY is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_FLATMEM=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
# CONFIG_LRU_GEN_STATS is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_DIAG=m
# CONFIG_UNIX is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_INTERFACE=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=y
CONFIG_XFRM_ESP=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_SMC=m
# CONFIG_SMC_DIAG is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
CONFIG_INET_DIAG_DESTROY=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
CONFIG_IPV6_IOAM6_LWTUNNEL=y
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
# CONFIG_NETFILTER_EGRESS is not set
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CONNTRACK_OVS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_SCTP=y
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
# CONFIG_NF_CONNTRACK_IRC is not set
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NF_NAT is not set
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=y
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_FLOW_OFFLOAD=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_TUNNEL=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
# CONFIG_NFT_REJECT is not set
# CONFIG_NFT_COMPAT is not set
CONFIG_NFT_HASH=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
CONFIG_NFT_SYNPROXY=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
# CONFIG_NF_FLOW_TABLE_PROCFS is not set
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
# CONFIG_NETFILTER_XT_SET is not set
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=m
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
# CONFIG_IP_SET_HASH_IP is not set
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
# CONFIG_IP_SET_HASH_IPPORTIP is not set
# CONFIG_IP_SET_HASH_IPPORTNET is not set
CONFIG_IP_SET_HASH_IPMAC=y
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=m
# CONFIG_IP_SET_HASH_NET is not set
CONFIG_IP_SET_HASH_NETNET=m
# CONFIG_IP_SET_HASH_NETPORT is not set
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=y
# CONFIG_NF_TABLES_IPV4 is not set
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=y
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_TABLES_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
# CONFIG_BRIDGE_EBT_BROUTE is not set
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
# CONFIG_BRIDGE_EBT_AMONG is not set
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
# CONFIG_BRIDGE_EBT_IP6 is not set
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
# CONFIG_BRIDGE_EBT_STP is not set
# CONFIG_BRIDGE_EBT_VLAN is not set
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
# CONFIG_BRIDGE_EBT_REDIRECT is not set
# CONFIG_BRIDGE_EBT_SNAT is not set
# CONFIG_BRIDGE_EBT_LOG is not set
# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_BPFILTER=y
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
CONFIG_BRIDGE_MRP=y
# CONFIG_BRIDGE_CFM is not set
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_NONE=m
CONFIG_NET_DSA_TAG_AR9331=m
CONFIG_NET_DSA_TAG_BRCM_COMMON=m
CONFIG_NET_DSA_TAG_BRCM=m
CONFIG_NET_DSA_TAG_BRCM_LEGACY=m
CONFIG_NET_DSA_TAG_BRCM_PREPEND=m
# CONFIG_NET_DSA_TAG_HELLCREEK is not set
CONFIG_NET_DSA_TAG_GSWIP=m
CONFIG_NET_DSA_TAG_DSA_COMMON=m
CONFIG_NET_DSA_TAG_DSA=m
CONFIG_NET_DSA_TAG_EDSA=m
CONFIG_NET_DSA_TAG_MTK=m
CONFIG_NET_DSA_TAG_KSZ=m
# CONFIG_NET_DSA_TAG_OCELOT is not set
# CONFIG_NET_DSA_TAG_OCELOT_8021Q is not set
CONFIG_NET_DSA_TAG_QCA=m
CONFIG_NET_DSA_TAG_RTL4_A=m
CONFIG_NET_DSA_TAG_RTL8_4=m
# CONFIG_NET_DSA_TAG_RZN1_A5PSW is not set
CONFIG_NET_DSA_TAG_LAN9303=m
CONFIG_NET_DSA_TAG_SJA1105=m
CONFIG_NET_DSA_TAG_TRAILER=m
CONFIG_NET_DSA_TAG_XRS700X=m
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
CONFIG_X25=y
CONFIG_LAPB=m
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=y
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=y
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BLA is not set
# CONFIG_BATMAN_ADV_DAT is not set
# CONFIG_BATMAN_ADV_NC is not set
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=y
CONFIG_HSR=m
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
CONFIG_NET_NCSI=y
# CONFIG_NCSI_OEM_CMD_GET_MAC is not set
# CONFIG_NCSI_OEM_CMD_KEEP_PHY is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=y
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=y
# CONFIG_BPQETHER is not set
CONFIG_BAYCOM_SER_FDX=y
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_YAM=y
# end of AX.25 network device drivers
CONFIG_CAN=y
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_INJECT_RX_DELAY is not set
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
# CONFIG_RXPERF is not set
# CONFIG_AF_KCM is not set
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_CRDA_SUPPORT is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=m
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT=""
#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
# CONFIG_NET_9P_VIRTIO is not set
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
# CONFIG_CAIF_NETDEV is not set
CONFIG_CAIF_USB=m
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_UART=m
# CONFIG_NFC_HCI is not set
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_SIM=m
CONFIG_NFC_VIRTUAL_NCI=m
CONFIG_NFC_FDP=y
CONFIG_NFC_FDP_I2C=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_I2C=m
CONFIG_NFC_PN532_UART=m
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_UART=m
CONFIG_NFC_MRVL_I2C=m
CONFIG_NFC_ST_NCI=m
CONFIG_NFC_ST_NCI_I2C=m
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
CONFIG_NFC_S3FWRN5=m
CONFIG_NFC_S3FWRN5_I2C=m
# CONFIG_NFC_S3FWRN82_UART is not set
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=y
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
# CONFIG_LWTUNNEL_BPF is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SELFTESTS=m
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
# CONFIG_ETHTOOL_NETLINK is not set
#
# Device Drivers
#
# CONFIG_PCCARD is not set
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=m
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
# CONFIG_CONNECTOR is not set
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol
# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_ARM_SCPI_POWER_DOMAIN=y
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_TURRIS_MOX_RWTM is not set
# CONFIG_BCM47XX_NVRAM is not set
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_CBMEM is not set
CONFIG_GOOGLE_COREBOOT_TABLE=m
CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT=m
# CONFIG_GOOGLE_MEMCONSOLE_COREBOOT is not set
CONFIG_GOOGLE_VPD=m
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_GNSS=m
CONFIG_GNSS_SERIAL=m
CONFIG_GNSS_MTK_SERIAL=m
CONFIG_GNSS_SIRF_SERIAL=m
CONFIG_GNSS_UBX_SERIAL=m
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=m
# CONFIG_MTD_BCM63XX_PARTS is not set
# CONFIG_MTD_BRCM_U_BOOT is not set
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_OF_PARTS=m
# CONFIG_MTD_OF_PARTS_BCM4908 is not set
# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set
# CONFIG_MTD_PARSER_IMAGETAG is not set
# CONFIG_MTD_PARSER_TPLINK_SAFELOADER is not set
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not set
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=m
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
# CONFIG_MTD_CFI_I4 is not set
CONFIG_MTD_CFI_I8=y
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PHYSMAP_BT1_ROM is not set
CONFIG_MTD_PHYSMAP_VERSATILE=y
# CONFIG_MTD_PHYSMAP_GEMINI is not set
# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_PLATRAM=m
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
CONFIG_MTD_SPEAR_SMI=m
CONFIG_MTD_SLRAM=m
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers
#
# NAND
#
CONFIG_MTD_NAND_CORE=m
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=m
# CONFIG_MTD_ONENAND_SAMSUNG is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
# CONFIG_MTD_RAW_NAND is not set
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
CONFIG_MTD_NAND_ECC_SW_BCH=y
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_HYPERBUS=m
# CONFIG_HBMC_AM654 is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
# CONFIG_PARPORT is not set
#
# NVME Support
#
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_DUMMY_IRQ=m
CONFIG_ICS932S401=m
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SMPRO_ERRMON is not set
# CONFIG_SMPRO_MISC is not set
CONFIG_HI6421V600_IRQ=m
# CONFIG_QCOM_COINCELL is not set
# CONFIG_QCOM_FASTRPC is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=m
CONFIG_OPEN_DICE=m
CONFIG_VCPU_STALL_DETECTOR=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=m
# CONFIG_EEPROM_93CX6 is not set
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_EEPROM_EE1004=m
# end of EEPROM support
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module (requires I2C)
#
CONFIG_ALTERA_STAPL=m
CONFIG_ECHO=y
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# end of Misc devices
#
# SCSI device support
#
# end of SCSI device support
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# end of IEEE 1394 (FireWire) support
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
CONFIG_CAIF_DRIVERS=y
CONFIG_CAIF_TTY=m
# CONFIG_CAIF_VIRTIO is not set
#
# Distributed Switch Architecture drivers
#
# CONFIG_B53 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_NET_DSA_LOOP=m
CONFIG_NET_DSA_LANTIQ_GSWIP=m
CONFIG_NET_DSA_MT7530=m
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON is not set
CONFIG_NET_DSA_MV88E6XXX=m
# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
CONFIG_NET_DSA_AR9331=m
# CONFIG_NET_DSA_QCA8K is not set
CONFIG_NET_DSA_XRS700X=m
CONFIG_NET_DSA_XRS700X_I2C=m
# CONFIG_NET_DSA_XRS700X_MDIO is not set
CONFIG_NET_DSA_REALTEK=m
# CONFIG_NET_DSA_REALTEK_RTL8365MB is not set
# CONFIG_NET_DSA_REALTEK_RTL8366RB is not set
CONFIG_NET_DSA_SMSC_LAN9303=m
CONFIG_NET_DSA_SMSC_LAN9303_I2C=m
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m
CONFIG_NET_DSA_VITESSE_VSC73XX=m
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m
# end of Distributed Switch Architecture drivers
# CONFIG_ETHERNET is not set
CONFIG_PHYLINK=m
CONFIG_PHYLIB=m
CONFIG_SWPHY=y
CONFIG_FIXED_PHY=m
CONFIG_SFP=m
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_MESON_GXL_PHY is not set
CONFIG_ADIN_PHY=m
CONFIG_ADIN1100_PHY=m
CONFIG_AQUANTIA_PHY=m
CONFIG_AX88796B_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM54140_PHY=m
# CONFIG_BCM63XX_PHY is not set
CONFIG_BCM7XXX_PHY=m
# CONFIG_BCM84881_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
# CONFIG_CICADA_PHY is not set
CONFIG_CORTINA_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=m
# CONFIG_LXT_PHY is not set
CONFIG_INTEL_XWAY_PHY=m
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
CONFIG_MARVELL_10G_PHY=m
# CONFIG_MARVELL_88X2222_PHY is not set
CONFIG_MAXLINEAR_GPHY=m
CONFIG_MEDIATEK_GE_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
CONFIG_MICROCHIP_T1_PHY=m
CONFIG_MICROSEMI_PHY=m
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
CONFIG_NXP_TJA11XX_PHY=m
# CONFIG_NCN26000_PHY is not set
CONFIG_AT803X_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_RENESAS_PHY=m
CONFIG_ROCKCHIP_PHY=m
# CONFIG_SMSC_PHY is not set
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
CONFIG_DP83TC811_PHY=m
# CONFIG_DP83848_PHY is not set
CONFIG_DP83867_PHY=m
# CONFIG_DP83869_PHY is not set
CONFIG_DP83TD510_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_XILINX_GMII2RGMII=m
CONFIG_PSE_CONTROLLER=y
CONFIG_PSE_REGULATOR=m
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
CONFIG_CAN_VXCAN=m
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
# CONFIG_CAN_AT91 is not set
CONFIG_CAN_CAN327=m
# CONFIG_CAN_FLEXCAN is not set
# CONFIG_CAN_GRCAN is not set
CONFIG_CAN_SLCAN=m
# CONFIG_CAN_SUN4I is not set
# CONFIG_CAN_XILINXCAN is not set
# CONFIG_CAN_C_CAN is not set
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_ISA=m
CONFIG_CAN_CC770_PLATFORM=m
CONFIG_CAN_CTUCANFD=m
CONFIG_CAN_CTUCANFD_PLATFORM=m
# CONFIG_CAN_IFI_CANFD is not set
CONFIG_CAN_M_CAN=m
# CONFIG_CAN_M_CAN_PLATFORM is not set
# CONFIG_CAN_RCAR is not set
# CONFIG_CAN_RCAR_CANFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
# CONFIG_CAN_SOFTING is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_MDIO_DEVICE=m
CONFIG_MDIO_BUS=m
CONFIG_FWNODE_MDIO=m
CONFIG_OF_MDIO=m
CONFIG_MDIO_DEVRES=m
# CONFIG_MDIO_SUN4I is not set
# CONFIG_MDIO_XGENE is not set
# CONFIG_MDIO_ASPEED is not set
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_BCM_IPROC is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_GPIO is not set
# CONFIG_MDIO_HISI_FEMAC is not set
CONFIG_MDIO_I2C=m
CONFIG_MDIO_MSCC_MIIM=m
# CONFIG_MDIO_MOXART is not set
# CONFIG_MDIO_OCTEON is not set
CONFIG_MDIO_IPQ4019=m
CONFIG_MDIO_IPQ8064=m
#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=m
# CONFIG_MDIO_BUS_MUX_MESON_G12A is not set
# CONFIG_MDIO_BUS_MUX_MESON_GXL is not set
# CONFIG_MDIO_BUS_MUX_BCM6368 is not set
# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
CONFIG_MDIO_BUS_MUX_GPIO=m
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=m
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
#
# PCS device drivers
#
# CONFIG_PCS_RZN1_MIIC is not set
# end of PCS device drivers
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_MPPE is not set
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_WLAN_VENDOR_ATH is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_P54_COMMON=m
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT76_CORE=m
CONFIG_MT76_LEDS=y
CONFIG_MT76_SDIO=m
CONFIG_MT76_CONNAC_LIB=m
CONFIG_MT7615_COMMON=m
CONFIG_MT7663_USB_SDIO_COMMON=m
CONFIG_MT7663S=m
CONFIG_MT7921_COMMON=m
CONFIG_MT7921S=m
# CONFIG_WLAN_VENDOR_MICROCHIP is not set
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
# CONFIG_WLAN_VENDOR_REALTEK is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
# CONFIG_WLAN_VENDOR_SILABS is not set
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SDIO=m
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_MAC80211_HWSIM is not set
CONFIG_VIRT_WIFI=m
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_LAPBETHER is not set
# CONFIG_IEEE802154_DRIVERS is not set
#
# Wireless WAN
#
CONFIG_WWAN=m
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=m
# CONFIG_QCOM_BAM_DMUX is not set
# CONFIG_RPMSG_WWAN_CTRL is not set
# end of Wireless WAN
CONFIG_NETDEVSIM=m
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=m
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=m
CONFIG_KEYBOARD_QT1050=m
CONFIG_KEYBOARD_QT1070=m
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_CLPS711X is not set
CONFIG_KEYBOARD_DLINK_DIR685=m
CONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_EP93XX is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=m
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_LPC32XX is not set
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
# CONFIG_KEYBOARD_IMX is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_NOMADIK is not set
# CONFIG_KEYBOARD_TEGRA is not set
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_PINEPHONE=m
# CONFIG_KEYBOARD_PXA27x is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_ST_KEYSCAN is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_KEYBOARD_IQS62X=m
CONFIG_KEYBOARD_OMAP4=y
# CONFIG_KEYBOARD_SPEAR is not set
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_CAP11XX=m
CONFIG_KEYBOARD_BCM=m
# CONFIG_KEYBOARD_MT6779 is not set
CONFIG_KEYBOARD_MTK_PMIC=m
# CONFIG_KEYBOARD_CYPRESS_SF is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_232=m
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_AS5011=m
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_QWIIC=m
# CONFIG_JOYSTICK_FSIA6B is not set
CONFIG_JOYSTICK_SENSEHAT=m
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=m
# CONFIG_RMI4_I2C is not set
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F3A is not set
# CONFIG_RMI4_F55 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
CONFIG_SERIO_GPIO_PS2=m
CONFIG_USERIO=m
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=m
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
# CONFIG_VT_CONSOLE is not set
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_ATMEL is not set
# CONFIG_SERIAL_MESON is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_SAMSUNG is not set
# CONFIG_SERIAL_TEGRA is not set
# CONFIG_SERIAL_TEGRA_TCU is not set
# CONFIG_SERIAL_IMX is not set
# CONFIG_SERIAL_IMX_EARLYCON is not set
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_SH_SCI is not set
# CONFIG_SERIAL_HS_LPC32XX is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
CONFIG_SERIAL_SIFIVE=m
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX=m
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_MXS_AUART is not set
CONFIG_SERIAL_XILINX_PS_UART=m
# CONFIG_SERIAL_MPS2_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
CONFIG_SERIAL_SPRD=y
# CONFIG_SERIAL_SPRD_CONSOLE is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_MVEBU_UART is not set
# CONFIG_SERIAL_OWL is not set
# CONFIG_SERIAL_RDA is not set
# CONFIG_SERIAL_MILBEAUT_USIO is not set
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_N_GSM=m
# CONFIG_NULL_TTY is not set
CONFIG_RPMSG_TTY=y
CONFIG_SERIAL_DEV_BUS=m
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_IPMB=m
CONFIG_IPMI_WATCHDOG=y
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
# CONFIG_SSIF_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_ATMEL=m
CONFIG_HW_RANDOM_BA431=m
CONFIG_HW_RANDOM_BCM2835=m
CONFIG_HW_RANDOM_IPROC_RNG200=m
CONFIG_HW_RANDOM_IXP4XX=m
CONFIG_HW_RANDOM_OMAP=m
CONFIG_HW_RANDOM_OMAP3_ROM=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_IMX_RNGC=m
CONFIG_HW_RANDOM_NOMADIK=m
CONFIG_HW_RANDOM_STM32=m
CONFIG_HW_RANDOM_MESON=m
CONFIG_HW_RANDOM_MTK=m
CONFIG_HW_RANDOM_EXYNOS=m
CONFIG_HW_RANDOM_NPCM=m
CONFIG_HW_RANDOM_KEYSTONE=m
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_HW_RANDOM_JH7110 is not set
CONFIG_DEVMEM=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=m
# CONFIG_TCG_TIS is not set
CONFIG_TCG_TIS_I2C=m
# CONFIG_TCG_TIS_SYNQUACER is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
# CONFIG_XILLYBUS_OF is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_GPMUX=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_DEMUX_PINCTRL=m
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ALTERA is not set
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=m
# CONFIG_I2C_CADENCE is not set
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DIGICOLOR is not set
CONFIG_I2C_EMEV2=m
# CONFIG_I2C_EXYNOS5 is not set
CONFIG_I2C_GPIO=m
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
# CONFIG_I2C_GXP is not set
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_LS2X is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=m
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
CONFIG_I2C_RK3X=m
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SUN6I_P2WI is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not set
CONFIG_I2C_XILINX=m
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_TAOS_EVM=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_FSI=m
CONFIG_I2C_VIRTIO=m
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
CONFIG_I2C_SLAVE_TESTUNIT=m
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
CONFIG_SPMI=m
CONFIG_SPMI_HISI3670=m
# CONFIG_SPMI_MSM_PMIC_ARB is not set
# CONFIG_SPMI_MTK_PMIF is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PTP_1588_CLOCK_DTE=y
CONFIG_PTP_1588_CLOCK_QORIQ=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
CONFIG_PTP_1588_CLOCK_IDTCM=m
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_AT91PIO4 is not set
CONFIG_PINCTRL_AXP209=m
# CONFIG_PINCTRL_BM1880 is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
# CONFIG_PINCTRL_DA850_PUPD is not set
# CONFIG_PINCTRL_DA9062 is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_LOONGSON2 is not set
# CONFIG_PINCTRL_LPC18XX is not set
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08=m
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
CONFIG_PINCTRL_OCELOT=y
# CONFIG_PINCTRL_PISTACHIO is not set
# CONFIG_PINCTRL_ROCKCHIP is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_STMFX=m
# CONFIG_PINCTRL_OWL is not set
# CONFIG_PINCTRL_ASPEED_G4 is not set
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
# CONFIG_PINCTRL_MT7629 is not set
# CONFIG_PINCTRL_MT8135 is not set
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7981 is not set
# CONFIG_PINCTRL_MT7986 is not set
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
# CONFIG_PINCTRL_MT8188 is not set
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_LPASS_LPI is not set
#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers
# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
# CONFIG_PINCTRL_STARFIVE_JH7110_SYS is not set
# CONFIG_PINCTRL_STARFIVE_JH7110_AON is not set
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_PINCTRL_UNIPHIER=y
# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
# CONFIG_PINCTRL_UNIPHIER_LD11 is not set
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS3 is not set
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
# CONFIG_GPIO_CDEV_V1 is not set
CONFIG_GPIO_GENERIC=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=m
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_ASPEED is not set
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not set
CONFIG_GPIO_CADENCE=m
# CONFIG_GPIO_CLPS711X is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=m
# CONFIG_GPIO_LOGICVC is not set
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=m
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_GPIO_SPRD is not set
# CONFIG_GPIO_STP_XWAY is not set
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
# CONFIG_GPIO_UNIPHIER is not set
# CONFIG_GPIO_VISCONTI is not set
# CONFIG_GPIO_XGENE_SB is not set
CONFIG_GPIO_XILINX=y
# CONFIG_GPIO_XLP is not set
CONFIG_GPIO_AMD_FCH=y
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=m
CONFIG_GPIO_GW_PLD=m
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TPIC2810=m
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=m
# CONFIG_GPIO_LP3943 is not set
CONFIG_GPIO_LP873X=m
# CONFIG_GPIO_SL28CPLD is not set
CONFIG_GPIO_TPS65086=m
CONFIG_GPIO_TQMX86=m
# CONFIG_GPIO_WM8994 is not set
# end of MFD GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
# CONFIG_GPIO_LATCH is not set
CONFIG_GPIO_MOCKUP=m
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_IP5XXX_POWER=m
CONFIG_TEST_POWER=m
CONFIG_CHARGER_ADP5061=m
CONFIG_BATTERY_ACT8945A=m
CONFIG_BATTERY_CW2015=m
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_SBS=m
# CONFIG_CHARGER_SBS is not set
CONFIG_MANAGER_SBS=m
CONFIG_BATTERY_BQ27XXX=m
# CONFIG_BATTERY_BQ27XXX_I2C is not set
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_PCF50633=m
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=m
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_DETECTOR_MAX14656=m
CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_MAX77976=m
# CONFIG_CHARGER_QCOM_SMBB is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
CONFIG_CHARGER_BQ25890=m
CONFIG_CHARGER_BQ25980=m
CONFIG_CHARGER_BQ256XX=m
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65217=m
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_BATTERY_GOLDFISH=m
CONFIG_BATTERY_RT5033=m
CONFIG_CHARGER_RT9455=m
# CONFIG_CHARGER_RT9467 is not set
# CONFIG_CHARGER_RT9471 is not set
# CONFIG_CHARGER_SC2731 is not set
CONFIG_CHARGER_UCS1002=m
CONFIG_CHARGER_BD99954=m
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_AHT10=m
CONFIG_SENSORS_AS370=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_AXI_FAN_CONTROL=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_BT1_PVT is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
CONFIG_SENSORS_CORSAIR_PSU=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_SPARX5 is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_GSC=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_FTSTEUTATES=m
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_GXP_FAN_CTRL is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWR1220=m
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX31730=m
CONFIG_SENSORS_MAX31760=m
CONFIG_SENSORS_MAX6620=m
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
# CONFIG_SENSORS_MC34VR500 is not set
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_TC654=m
# CONFIG_SENSORS_TPS23861 is not set
CONFIG_SENSORS_MENF21BMC_HWMON=m
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775_I2C=m
CONFIG_SENSORS_NCT7802=m
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NSA320 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_PECI_CPUTEMP is not set
CONFIG_SENSORS_PECI_DIMMTEMP=m
CONFIG_SENSORS_PECI=m
CONFIG_PMBUS=m
# CONFIG_SENSORS_PMBUS is not set
CONFIG_SENSORS_ADM1266=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_BEL_PFE=m
CONFIG_SENSORS_BPA_RS600=m
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
CONFIG_SENSORS_FSP_3Y=m
# CONFIG_SENSORS_IBM_CFFPS is not set
CONFIG_SENSORS_DPS920AB=m
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
CONFIG_SENSORS_IR36021=m
CONFIG_SENSORS_IR38064=m
# CONFIG_SENSORS_IR38064_REGULATOR is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LM25066_REGULATOR is not set
CONFIG_SENSORS_LT7182S=m
# CONFIG_SENSORS_LTC2978 is not set
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_MAX15301=m
# CONFIG_SENSORS_MAX16064 is not set
CONFIG_SENSORS_MAX16601=m
CONFIG_SENSORS_MAX20730=m
CONFIG_SENSORS_MAX20751=m
# CONFIG_SENSORS_MAX31785 is not set
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_MP2888=m
# CONFIG_SENSORS_MP2975 is not set
CONFIG_SENSORS_MP5023=m
# CONFIG_SENSORS_MPQ7932 is not set
# CONFIG_SENSORS_PIM4328 is not set
CONFIG_SENSORS_PLI1209BC=m
# CONFIG_SENSORS_PLI1209BC_REGULATOR is not set
CONFIG_SENSORS_PM6764TR=m
# CONFIG_SENSORS_PXE1610 is not set
CONFIG_SENSORS_Q54SJ108A2=m
CONFIG_SENSORS_STPDDC60=m
# CONFIG_SENSORS_TDA38640 is not set
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_TPS53679=m
# CONFIG_SENSORS_TPS546D24 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE152 is not set
CONFIG_SENSORS_XDPE122=m
CONFIG_SENSORS_XDPE122_REGULATOR=y
# CONFIG_SENSORS_ZL6100 is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
# CONFIG_SENSORS_SL28CPLD is not set
CONFIG_SENSORS_SBTSI=m
CONFIG_SENSORS_SBRMI=m
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
CONFIG_SENSORS_SHT4x=m
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC2305=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
# CONFIG_SENSORS_SCH5627 is not set
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_STTS751=m
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA238=m
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_TC74=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_TMP464=m
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_W83773G=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CPU_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_THERMAL_MMIO=m
CONFIG_HISI_THERMAL=y
# CONFIG_IMX_THERMAL is not set
# CONFIG_IMX8MM_THERMAL is not set
# CONFIG_K3_THERMAL is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_SPEAR_THERMAL is not set
# CONFIG_SUN8I_THERMAL is not set
# CONFIG_ROCKCHIP_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set
# CONFIG_RCAR_GEN3_THERMAL is not set
# CONFIG_RZG2L_THERMAL is not set
# CONFIG_KIRKWOOD_THERMAL is not set
# CONFIG_DOVE_THERMAL is not set
# CONFIG_ARMADA_THERMAL is not set
# CONFIG_DA9062_THERMAL is not set
#
# Mediatek thermal drivers
#
# CONFIG_MTK_THERMAL is not set
# end of Mediatek thermal drivers
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
# CONFIG_BCM2711_THERMAL is not set
# CONFIG_BCM2835_THERMAL is not set
# CONFIG_BRCMSTB_THERMAL is not set
# CONFIG_BCM_NS_THERMAL is not set
# CONFIG_BCM_SR_THERMAL is not set
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
# CONFIG_EXYNOS_THERMAL is not set
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
# CONFIG_TEGRA_BPMP_THERMAL is not set
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers
#
# Qualcomm thermal drivers
#
# end of Qualcomm thermal drivers
# CONFIG_UNIPHIER_THERMAL is not set
# CONFIG_SPRD_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
# CONFIG_DA9052_WATCHDOG is not set
# CONFIG_DA9055_WATCHDOG is not set
# CONFIG_DA9063_WATCHDOG is not set
CONFIG_DA9062_WATCHDOG=m
CONFIG_GPIO_WATCHDOG=m
# CONFIG_MENF21BMC_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
CONFIG_RAVE_SP_WATCHDOG=m
# CONFIG_SL28CPLD_WATCHDOG is not set
# CONFIG_ARMADA_37XX_WATCHDOG is not set
# CONFIG_ASM9260_WATCHDOG is not set
# CONFIG_AT91RM9200_WATCHDOG is not set
# CONFIG_AT91SAM9X_WATCHDOG is not set
# CONFIG_SAMA5D4_WATCHDOG is not set
CONFIG_CADENCE_WATCHDOG=y
# CONFIG_FTWDT010_WATCHDOG is not set
# CONFIG_S3C2410_WATCHDOG is not set
CONFIG_DW_WATCHDOG=y
# CONFIG_EP93XX_WATCHDOG is not set
# CONFIG_OMAP_WATCHDOG is not set
# CONFIG_PNX4008_WATCHDOG is not set
# CONFIG_DAVINCI_WATCHDOG is not set
# CONFIG_K3_RTI_WATCHDOG is not set
CONFIG_RN5T618_WATCHDOG=m
# CONFIG_SUNXI_WATCHDOG is not set
# CONFIG_NPCM7XX_WATCHDOG is not set
# CONFIG_STMP3XXX_RTC_WATCHDOG is not set
# CONFIG_TS4800_WATCHDOG is not set
# CONFIG_TS72XX_WATCHDOG is not set
CONFIG_MAX63XX_WATCHDOG=m
# CONFIG_MAX77620_WATCHDOG is not set
# CONFIG_IMX2_WDT is not set
# CONFIG_IMX7ULP_WDT is not set
# CONFIG_RETU_WATCHDOG is not set
# CONFIG_MOXART_WDT is not set
# CONFIG_ST_LPC_WATCHDOG is not set
# CONFIG_TEGRA_WATCHDOG is not set
# CONFIG_QCOM_WDT is not set
# CONFIG_MESON_GXBB_WATCHDOG is not set
# CONFIG_MESON_WATCHDOG is not set
# CONFIG_MEDIATEK_WATCHDOG is not set
# CONFIG_DIGICOLOR_WATCHDOG is not set
# CONFIG_LPC18XX_WATCHDOG is not set
# CONFIG_RENESAS_WDT is not set
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
# CONFIG_ASPEED_WATCHDOG is not set
# CONFIG_UNIPHIER_WATCHDOG is not set
# CONFIG_RTD119X_WATCHDOG is not set
# CONFIG_REALTEK_OTTO_WDT is not set
# CONFIG_SPRD_WATCHDOG is not set
# CONFIG_VISCONTI_WATCHDOG is not set
# CONFIG_MSC313E_WATCHDOG is not set
# CONFIG_APPLE_WATCHDOG is not set
# CONFIG_SUNPLUS_WATCHDOG is not set
# CONFIG_SC520_WDT is not set
# CONFIG_BCM47XX_WDT is not set
# CONFIG_BCM2835_WDT is not set
# CONFIG_BCM_KONA_WDT is not set
# CONFIG_BCM7038_WDT is not set
# CONFIG_IMGPDC_WDT is not set
# CONFIG_MT7621_WDT is not set
# CONFIG_MPC5200_WDT is not set
CONFIG_MEN_A21_WDT=y
# CONFIG_UML_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_SOC=y
# CONFIG_BCMA_DRIVER_MIPS is not set
CONFIG_BCMA_SFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=m
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_MFD_AT91_USART is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
# CONFIG_MFD_MADERA is not set
CONFIG_MFD_DA9062=m
CONFIG_MFD_DA9063=m
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_GATEWORKS_GSC=m
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_MFD_MP2629=m
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
# CONFIG_MFD_HI6421_PMIC is not set
CONFIG_MFD_HI6421_SPMI=m
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_MFD_IQS62X=m
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=m
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_MAX14577=m
# CONFIG_MFD_MAX77650 is not set
CONFIG_MFD_MAX77686=m
CONFIG_MFD_MAX77693=m
# CONFIG_MFD_MAX77714 is not set
CONFIG_MFD_MAX8907=m
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
CONFIG_MFD_MT6397=m
CONFIG_MFD_MENF21BMC=m
CONFIG_MFD_NTXEC=m
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_SPMI_PMIC is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RT5120=m
# CONFIG_MFD_RK808 is not set
CONFIG_MFD_RN5T618=m
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SIMPLE_MFD_I2C=m
# CONFIG_MFD_SL28CPLD is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=m
CONFIG_MFD_TI_LMU=m
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65086=m
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TI_LP873X=m
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=m
CONFIG_MFD_TQMX86=m
CONFIG_MFD_ARIZONA=m
CONFIG_MFD_ARIZONA_I2C=m
# CONFIG_MFD_CS47L24 is not set
# CONFIG_MFD_WM5102 is not set
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
# CONFIG_MFD_WM8998 is not set
CONFIG_MFD_WM8994=m
# CONFIG_MFD_STW481X is not set
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STMFX=m
CONFIG_MFD_ATC260X=m
CONFIG_MFD_ATC260X_I2C=m
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
CONFIG_MFD_QCOM_PM8008=m
CONFIG_RAVE_SP_CORE=m
CONFIG_MFD_RSMU_I2C=m
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=m
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_ACT8945A is not set
CONFIG_REGULATOR_AD5398=m
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_ATC260X=m
CONFIG_REGULATOR_AXP20X=m
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9063 is not set
CONFIG_REGULATOR_DA9121=m
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=m
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_FAN53880=m
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_HI6421V600=m
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
# CONFIG_REGULATOR_LM363X is not set
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
# CONFIG_REGULATOR_LP872X is not set
CONFIG_REGULATOR_LP873X=m
CONFIG_REGULATOR_LP8755=m
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=m
# CONFIG_REGULATOR_MAX14577 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77650 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8893=m
CONFIG_REGULATOR_MAX8907=m
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8973=m
CONFIG_REGULATOR_MAX20086=m
# CONFIG_REGULATOR_MAX20411 is not set
CONFIG_REGULATOR_MAX77686=m
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_MAX77826=m
CONFIG_REGULATOR_MCP16502=m
CONFIG_REGULATOR_MP5416=m
# CONFIG_REGULATOR_MP8859 is not set
CONFIG_REGULATOR_MP886X=m
CONFIG_REGULATOR_MPQ7920=m
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_MT6315 is not set
CONFIG_REGULATOR_MT6323=m
CONFIG_REGULATOR_MT6331=m
CONFIG_REGULATOR_MT6332=m
# CONFIG_REGULATOR_MT6357 is not set
CONFIG_REGULATOR_MT6358=m
CONFIG_REGULATOR_MT6359=m
CONFIG_REGULATOR_MT6397=m
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_PCA9450 is not set
# CONFIG_REGULATOR_PCF50633 is not set
# CONFIG_REGULATOR_PF8X00 is not set
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=m
CONFIG_REGULATOR_PV88090=m
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_QCOM_RPMH is not set
CONFIG_REGULATOR_QCOM_SPMI=m
CONFIG_REGULATOR_QCOM_USB_VBUS=m
# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
CONFIG_REGULATOR_RN5T618=m
CONFIG_REGULATOR_RT4801=m
CONFIG_REGULATOR_RT5120=m
CONFIG_REGULATOR_RT5190A=m
# CONFIG_REGULATOR_RT5759 is not set
CONFIG_REGULATOR_RT6160=m
# CONFIG_REGULATOR_RT6190 is not set
CONFIG_REGULATOR_RT6245=m
CONFIG_REGULATOR_RTQ2134=m
CONFIG_REGULATOR_RTMV20=m
CONFIG_REGULATOR_RTQ6752=m
# CONFIG_REGULATOR_S2MPA01 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_SC2731 is not set
CONFIG_REGULATOR_SLG51000=m
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
# CONFIG_REGULATOR_SY8106A is not set
CONFIG_REGULATOR_SY8824X=m
# CONFIG_REGULATOR_SY8827N is not set
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS6286X is not set
CONFIG_REGULATOR_TPS65023=m
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65086=m
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS65217=m
# CONFIG_REGULATOR_TPS68470 is not set
# CONFIG_REGULATOR_UNIPHIER is not set
CONFIG_REGULATOR_VCTRL=m
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_REGULATOR_QCOM_LABIBB=m
# CONFIG_RC_CORE is not set
CONFIG_CEC_CORE=m
#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_MESON_AO is not set
# CONFIG_CEC_MESON_G12A_AO is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SAMSUNG_S5P is not set
# CONFIG_CEC_STI is not set
# CONFIG_CEC_STM32 is not set
# CONFIG_CEC_TEGRA is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_VIDEO_NOMODESET=y
# CONFIG_IMX_IPUV3_CORE is not set
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
CONFIG_DRM_DEBUG_MODESET_LOCK=y
# CONFIG_DRM_FBDEV_EMULATION is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=m
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_GEM_DMA_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
CONFIG_DRM_SCHED=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set
CONFIG_DRM_KOMEDA=m
# end of ARM devices
# CONFIG_DRM_KMB_DISPLAY is not set
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VKMS=m
# CONFIG_DRM_EXYNOS is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
CONFIG_DRM_RCAR_USE_LVDS=y
# CONFIG_DRM_RCAR_USE_MIPI_DSI is not set
# CONFIG_DRM_RZG2L_MIPI_DSI is not set
# CONFIG_DRM_SUN4I is not set
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_PANEL_ARM_VERSATILE=m
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=m
# CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0 is not set
CONFIG_DRM_PANEL_BOE_HIMAX8279D=m
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
# CONFIG_DRM_PANEL_DSI_CM is not set
CONFIG_DRM_PANEL_LVDS=m
CONFIG_DRM_PANEL_EBBG_FT8719=m
CONFIG_DRM_PANEL_ELIDA_KD35T133=m
# CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02 is not set
# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set
CONFIG_DRM_PANEL_HIMAX_HX8394=m
CONFIG_DRM_PANEL_ILITEK_ILI9881C=m
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=m
# CONFIG_DRM_PANEL_JADARD_JD9365DA_H3 is not set
CONFIG_DRM_PANEL_JDI_LT070ME05000=m
CONFIG_DRM_PANEL_JDI_R63452=m
CONFIG_DRM_PANEL_KHADAS_TS050=m
# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set
# CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W is not set
# CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829 is not set
# CONFIG_DRM_PANEL_NEWVISION_NV3051D is not set
CONFIG_DRM_PANEL_NOVATEK_NT35510=m
CONFIG_DRM_PANEL_NOVATEK_NT35560=m
# CONFIG_DRM_PANEL_NOVATEK_NT35950 is not set
CONFIG_DRM_PANEL_NOVATEK_NT36672A=m
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set
# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=m
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=m
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SHARP_LS060T1SX01=m
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
CONFIG_DRM_PANEL_SITRONIX_ST7703=m
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=m
CONFIG_DRM_PANEL_TDO_TL070WSH30=m
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
# CONFIG_DRM_PANEL_VISIONOX_RM69299 is not set
CONFIG_DRM_PANEL_VISIONOX_VTDR6130=m
CONFIG_DRM_PANEL_XINPENG_XPP055C272=m
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_CHIPONE_ICN6211=m
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_CROS_EC_ANX7688 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_FSL_LDB is not set
CONFIG_DRM_ITE_IT6505=m
CONFIG_DRM_LONTIUM_LT8912B=m
CONFIG_DRM_LONTIUM_LT9211=m
# CONFIG_DRM_LONTIUM_LT9611 is not set
CONFIG_DRM_LONTIUM_LT9611UXC=m
CONFIG_DRM_ITE_IT66121=m
CONFIG_DRM_LVDS_CODEC=m
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
CONFIG_DRM_NWL_MIPI_DSI=m
CONFIG_DRM_NXP_PTN3460=m
CONFIG_DRM_PARADE_PS8622=m
# CONFIG_DRM_PARADE_PS8640 is not set
CONFIG_DRM_SIL_SII8620=m
CONFIG_DRM_SII902X=m
# CONFIG_DRM_SII9234 is not set
CONFIG_DRM_SIMPLE_BRIDGE=m
CONFIG_DRM_THINE_THC63LVD1024=m
CONFIG_DRM_TOSHIBA_TC358762=m
CONFIG_DRM_TOSHIBA_TC358764=m
# CONFIG_DRM_TOSHIBA_TC358767 is not set
CONFIG_DRM_TOSHIBA_TC358768=m
CONFIG_DRM_TOSHIBA_TC358775=m
CONFIG_DRM_TI_DLPC3433=m
CONFIG_DRM_TI_TFP410=m
CONFIG_DRM_TI_SN65DSI83=m
CONFIG_DRM_TI_SN65DSI86=m
CONFIG_DRM_TI_TPD12S015=m
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_DRM_ANALOGIX_DP=m
CONFIG_DRM_ANALOGIX_ANX7625=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_ADV7511_CEC=y
CONFIG_DRM_CDNS_DSI=m
CONFIG_DRM_CDNS_DSI_J721E=y
CONFIG_DRM_CDNS_MHDP8546=m
CONFIG_DRM_CDNS_MHDP8546_J721E=y
# CONFIG_DRM_IMX8QM_LDB is not set
# CONFIG_DRM_IMX8QXP_LDB is not set
# CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set
# CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set
# end of Display Interface Bridges
# CONFIG_DRM_INGENIC is not set
# CONFIG_DRM_V3D is not set
CONFIG_DRM_ETNAVIV=m
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_LOGICVC=m
# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_IMX_LCDIF is not set
CONFIG_DRM_ARCPGU=m
# CONFIG_DRM_OFDRM is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_PL111 is not set
# CONFIG_DRM_TVE200 is not set
# CONFIG_DRM_LIMA is not set
# CONFIG_DRM_ASPEED_GFX is not set
# CONFIG_DRM_MCDE is not set
# CONFIG_DRM_TIDSS is not set
CONFIG_DRM_SSD130X=m
CONFIG_DRM_SSD130X_I2C=m
# CONFIG_DRM_SPRD is not set
CONFIG_DRM_LEGACY=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_BACKLIGHT=m
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CLPS711X is not set
# CONFIG_FB_IMX is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_PVR2 is not set
CONFIG_FB_OPENCORES=m
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_ATMEL is not set
# CONFIG_FB_PXA168 is not set
# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_SM501=m
CONFIG_FB_IBM_GXT4500=m
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_DA8XX is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_SIMPLE=m
CONFIG_FB_SSD1307=m
# CONFIG_FB_OMAP2 is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_KTZ8866 is not set
CONFIG_BACKLIGHT_LM3533=m
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_QCOM_WLED=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
# CONFIG_BACKLIGHT_LP855X is not set
CONFIG_BACKLIGHT_TPS65217=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
CONFIG_BACKLIGHT_BD6107=m
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_BACKLIGHT_RAVE_SP is not set
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# end of Console display driver support
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
# CONFIG_DRM_ACCEL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
# CONFIG_HID_COUGAR is not set
CONFIG_HID_MACALLY=m
CONFIG_HID_CMEDIA=m
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
# CONFIG_HID_EVISION is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_GLORIOUS=m
# CONFIG_HID_VIVALDI is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
# CONFIG_HID_ITE is not set
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_MAGICMOUSE=m
# CONFIG_HID_MALTRON is not set
CONFIG_HID_MAYFLASH=m
CONFIG_HID_REDRAGON=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NINTENDO is not set
CONFIG_HID_NTI=m
CONFIG_HID_ORTEK=m
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=m
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PLAYSTATION=m
CONFIG_PLAYSTATION_FF=y
CONFIG_HID_PXRC=m
CONFIG_HID_RAZER=m
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_SAITEK=m
CONFIG_HID_SEMITEK=m
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=m
# CONFIG_STEAM_FF is not set
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_TOPRE=m
CONFIG_HID_THINGM=m
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# HID-BPF support
#
# end of HID-BPF support
CONFIG_I2C_HID=m
CONFIG_I2C_HID_OF=m
CONFIG_I2C_HID_OF_ELAN=m
CONFIG_I2C_HID_OF_GOODIX=m
CONFIG_I2C_HID_CORE=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=m
CONFIG_PWRSEQ_SD8787=m
CONFIG_PWRSEQ_SIMPLE=m
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_SUNPLUS is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_SDHCI_OF_ARASAN=m
# CONFIG_MMC_SDHCI_OF_ASPEED is not set
# CONFIG_MMC_SDHCI_OF_AT91 is not set
# CONFIG_MMC_SDHCI_OF_ESDHC is not set
CONFIG_MMC_SDHCI_OF_DWCMSHC=m
# CONFIG_MMC_SDHCI_OF_SPARX5 is not set
CONFIG_MMC_SDHCI_CADENCE=m
# CONFIG_MMC_SDHCI_ESDHC_IMX is not set
# CONFIG_MMC_SDHCI_DOVE is not set
# CONFIG_MMC_SDHCI_TEGRA is not set
# CONFIG_MMC_SDHCI_S3C is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_SDHCI_SPEAR is not set
# CONFIG_MMC_SDHCI_BCM_KONA is not set
CONFIG_MMC_SDHCI_F_SDH30=m
CONFIG_MMC_SDHCI_MILBEAUT=m
# CONFIG_MMC_SDHCI_IPROC is not set
# CONFIG_MMC_MESON_GX is not set
# CONFIG_MMC_MESON_MX_SDHC is not set
# CONFIG_MMC_MESON_MX_SDIO is not set
# CONFIG_MMC_MOXART is not set
# CONFIG_MMC_SDHCI_ST is not set
# CONFIG_MMC_OMAP_HS is not set
# CONFIG_MMC_SDHCI_MSM is not set
# CONFIG_MMC_DAVINCI is not set
# CONFIG_MMC_SDHCI_SPRD is not set
# CONFIG_MMC_SDHI is not set
# CONFIG_MMC_UNIPHIER is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_SH_MMCIF is not set
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_CQHCI=m
CONFIG_MMC_HSQ=m
# CONFIG_MMC_BCM2835 is not set
CONFIG_MMC_MTK=m
# CONFIG_MMC_SDHCI_BRCMSTB is not set
CONFIG_MMC_SDHCI_XENON=m
# CONFIG_MMC_SDHCI_OMAP is not set
CONFIG_MMC_SDHCI_AM654=m
# CONFIG_MMC_OWL is not set
CONFIG_MMC_LITEX=m
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_CLASS_MULTICOLOR=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_ARIEL is not set
# CONFIG_LEDS_AW2013 is not set
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
# CONFIG_LEDS_TURRIS_OMNIA is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
CONFIG_LEDS_LM3533=m
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_LM3692X=m
# CONFIG_LEDS_MT6323 is not set
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA955X_GPIO=y
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_TCA6507=m
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_MENF21BMC=m
CONFIG_LEDS_IS31FL319X=m
CONFIG_LEDS_IS31FL32XX=m
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_SYSCON=y
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM3697=m
# CONFIG_LEDS_LM36274 is not set
CONFIG_LEDS_TPS6105X=m
# CONFIG_LEDS_IP30 is not set
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set
#
# Flash and Torch LED drivers
#
# CONFIG_LEDS_AAT1290 is not set
CONFIG_LEDS_AS3645A=m
CONFIG_LEDS_KTD2692=m
CONFIG_LEDS_LM3601X=m
CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_RT4505=m
CONFIG_LEDS_RT8515=m
# CONFIG_LEDS_SGM3140 is not set
#
# RGB LED drivers
#
# CONFIG_LEDS_PWM_MULTICOLOR is not set
CONFIG_LEDS_QCOM_LPG=m
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_RDMA_SIW=m
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_INFINIBAND_RTRS=m
CONFIG_INFINIBAND_RTRS_CLIENT=m
# CONFIG_INFINIBAND_RTRS_SERVER is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_APPLE_ADMAC is not set
# CONFIG_AXI_DMAC is not set
# CONFIG_DMA_JZ4780 is not set
# CONFIG_DMA_SA11X0 is not set
# CONFIG_DMA_SUN6I is not set
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_EP93XX_DMA is not set
CONFIG_FSL_EDMA=y
# CONFIG_IMG_MDC_DMA is not set
CONFIG_INTEL_IDMA64=y
# CONFIG_K3_DMA is not set
# CONFIG_MCF_EDMA is not set
# CONFIG_MILBEAUT_HDMAC is not set
# CONFIG_MILBEAUT_XDMAC is not set
# CONFIG_MMP_PDMA is not set
# CONFIG_MMP_TDMA is not set
# CONFIG_MV_XOR is not set
# CONFIG_MXS_DMA is not set
# CONFIG_NBPFAXI_DMA is not set
# CONFIG_STM32_DMA is not set
# CONFIG_STM32_DMAMUX is not set
# CONFIG_STM32_MDMA is not set
# CONFIG_SPRD_DMA is not set
# CONFIG_TEGRA20_APB_DMA is not set
# CONFIG_TEGRA210_ADMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_UNIPHIER_MDMAC is not set
# CONFIG_UNIPHIER_XDMAC is not set
# CONFIG_XGENE_DMA is not set
# CONFIG_XILINX_XDMA is not set
# CONFIG_XILINX_ZYNQMP_DMA is not set
CONFIG_XILINX_ZYNQMP_DPDMA=m
# CONFIG_MTK_HSDMA is not set
# CONFIG_MTK_CQDMA is not set
# CONFIG_QCOM_ADM is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
CONFIG_QCOM_HIDMA=m
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_RZN1_DMAMUX is not set
CONFIG_SF_PDMA=y
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
# CONFIG_SH_DMAE is not set
# CONFIG_RCAR_DMAC is not set
# CONFIG_RENESAS_USB_DMAC is not set
# CONFIG_RZ_DMAC is not set
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_DMA_CROSSBAR=y
# CONFIG_INTEL_LDMA is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
CONFIG_DMABUF_MOVE_NOTIFY=y
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
# CONFIG_LINEDISP is not set
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_HT16K33 is not set
CONFIG_LCD2S=m
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_UIO=m
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_UIO_PRUSS=m
CONFIG_VFIO=y
CONFIG_VFIO_CONTAINER=y
CONFIG_VFIO_NOIOMMU=y
# CONFIG_VFIO_PLATFORM is not set
CONFIG_IRQ_BYPASS_MANAGER=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_VDPA=m
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=m
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
CONFIG_VDPA=y
CONFIG_VDPA_USER=m
# CONFIG_MLX5_VDPA_STEERING_DEBUG is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_VSOCK=m
CONFIG_VHOST_VDPA=m
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=m
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
CONFIG_COMEDI_ISA_DRIVERS=y
# CONFIG_COMEDI_PCL711 is not set
CONFIG_COMEDI_PCL724=y
CONFIG_COMEDI_PCL726=y
CONFIG_COMEDI_PCL730=y
CONFIG_COMEDI_PCL812=m
# CONFIG_COMEDI_PCL816 is not set
# CONFIG_COMEDI_PCL818 is not set
# CONFIG_COMEDI_PCM3724 is not set
CONFIG_COMEDI_AMPLC_DIO200_ISA=y
# CONFIG_COMEDI_AMPLC_PC236_ISA is not set
CONFIG_COMEDI_AMPLC_PC263_ISA=y
CONFIG_COMEDI_RTI800=m
CONFIG_COMEDI_RTI802=y
CONFIG_COMEDI_DAC02=y
# CONFIG_COMEDI_DAS16M1 is not set
# CONFIG_COMEDI_DAS08_ISA is not set
CONFIG_COMEDI_DAS16=y
# CONFIG_COMEDI_DAS800 is not set
CONFIG_COMEDI_DAS1800=m
CONFIG_COMEDI_DAS6402=m
# CONFIG_COMEDI_DT2801 is not set
# CONFIG_COMEDI_DT2811 is not set
# CONFIG_COMEDI_DT2814 is not set
CONFIG_COMEDI_DT2815=m
# CONFIG_COMEDI_DT2817 is not set
CONFIG_COMEDI_DT282X=y
CONFIG_COMEDI_DMM32AT=y
CONFIG_COMEDI_FL512=y
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=m
CONFIG_COMEDI_C6XDIGIO=y
# CONFIG_COMEDI_MPC624 is not set
# CONFIG_COMEDI_ADQ12B is not set
CONFIG_COMEDI_NI_AT_A2150=m
# CONFIG_COMEDI_NI_AT_AO is not set
CONFIG_COMEDI_NI_ATMIO=y
CONFIG_COMEDI_NI_ATMIO16D=y
CONFIG_COMEDI_NI_LABPC_ISA=y
# CONFIG_COMEDI_PCMAD is not set
CONFIG_COMEDI_PCMDA12=m
CONFIG_COMEDI_PCMMIO=y
# CONFIG_COMEDI_PCMUIO is not set
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
# CONFIG_COMEDI_8255_SA is not set
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=m
CONFIG_COMEDI_TESTS_EXAMPLE=m
CONFIG_COMEDI_TESTS_NI_ROUTES=m
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs
# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_APPLE_NCO is not set
CONFIG_COMMON_CLK_MAX77686=m
CONFIG_COMMON_CLK_MAX9485=m
# CONFIG_COMMON_CLK_HI655X is not set
# CONFIG_COMMON_CLK_SCMI is not set
# CONFIG_COMMON_CLK_SCPI is not set
CONFIG_COMMON_CLK_SI5341=m
CONFIG_COMMON_CLK_SI5351=m
CONFIG_COMMON_CLK_SI514=m
# CONFIG_COMMON_CLK_SI544 is not set
CONFIG_COMMON_CLK_SI570=m
# CONFIG_COMMON_CLK_BM1880 is not set
CONFIG_COMMON_CLK_CDCE706=m
# CONFIG_COMMON_CLK_TPS68470 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
CONFIG_COMMON_CLK_CS2000_CP=m
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_OXNAS is not set
CONFIG_COMMON_CLK_RS9_PCIE=m
# CONFIG_COMMON_CLK_VC5 is not set
CONFIG_COMMON_CLK_VC7=m
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
CONFIG_COMMON_CLK_FIXED_MMIO=y
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_STUB_CLK_HI6220 is not set
# CONFIG_STUB_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_BOSTON is not set
# CONFIG_MXC_CLK is not set
# CONFIG_CLK_IMX8MM is not set
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set
# CONFIG_CLK_IMXRT1050 is not set
#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4755 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers
# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set
#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MEDIATEK_FHCTL is not set
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7981 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms
# CONFIG_MSTAR_MSC313_CPUPLL is not set
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
# CONFIG_XILINX_VCU is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_HWSPINLOCK=y
# CONFIG_HWSPINLOCK_OMAP is not set
# CONFIG_HWSPINLOCK_QCOM is not set
# CONFIG_HWSPINLOCK_SPRD is not set
# CONFIG_HWSPINLOCK_STM32 is not set
# CONFIG_HWSPINLOCK_SUN6I is not set
# CONFIG_HSEM_U8500 is not set
#
# Clock Source drivers
#
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_TEGRA186_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_SPRD_TIMER is not set
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
# end of Clock Source drivers
CONFIG_MAILBOX=y
# CONFIG_IMX_MBOX is not set
CONFIG_PLATFORM_MHU=y
# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
# CONFIG_ROCKCHIP_MBOX is not set
CONFIG_ALTERA_MBOX=y
# CONFIG_HI3660_MBOX is not set
# CONFIG_HI6220_MBOX is not set
CONFIG_MAILBOX_TEST=m
# CONFIG_POLARFIRE_SOC_MAILBOX is not set
# CONFIG_QCOM_APCS_IPC is not set
# CONFIG_BCM_PDC_MBOX is not set
# CONFIG_STM32_IPCC is not set
# CONFIG_MTK_ADSP_MBOX is not set
# CONFIG_MTK_CMDQ_MBOX is not set
# CONFIG_SUN6I_MSGBOX is not set
# CONFIG_SPRD_MBOX is not set
# CONFIG_QCOM_IPCC is not set
CONFIG_IOMMU_IOVA=m
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
# CONFIG_RPMSG_CHAR is not set
CONFIG_RPMSG_CTRL=m
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_QCOM_GLINK=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
# CONFIG_APPLE_RTKIT is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set
#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers
# CONFIG_LOONGSON2_GUTS is not set
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_PMIC_WRAP is not set
# CONFIG_MTK_REGULATOR_COUPLER is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers
# CONFIG_WPCM450_SOC is not set
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RAMP_CTRL is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMEM is not set
# CONFIG_QCOM_SMD_RPM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_WCNSS_CTRL is not set
# CONFIG_QCOM_APR is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
CONFIG_SOC_TI=y
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set
#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=m
#
# Extcon Device Drivers
#
CONFIG_EXTCON_FSA9480=m
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77693=m
CONFIG_EXTCON_PTN5150=m
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
# CONFIG_EXTCON_RT8973A is not set
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=m
CONFIG_MEMORY=y
CONFIG_DDR=y
# CONFIG_ATMEL_SDRAMC is not set
# CONFIG_ATMEL_EBI is not set
# CONFIG_BRCMSTB_DPFE is not set
# CONFIG_BRCMSTB_MEMC is not set
# CONFIG_BT1_L2_CTL is not set
# CONFIG_TI_AEMIF is not set
# CONFIG_TI_EMIF is not set
# CONFIG_OMAP_GPMC is not set
# CONFIG_MVEBU_DEVBUS is not set
# CONFIG_FSL_CORENET_CF is not set
# CONFIG_FSL_IFC is not set
# CONFIG_JZ4780_NEMC is not set
# CONFIG_MTK_SMI is not set
# CONFIG_DA8XX_DDRCTL is not set
# CONFIG_RENESAS_RPCIF is not set
# CONFIG_STM32_FMC2_EBI is not set
# CONFIG_SAMSUNG_MC is not set
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
# CONFIG_TEGRA210_EMC is not set
# CONFIG_IIO is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_ATMEL is not set
CONFIG_PWM_ATMEL_TCB=y
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_EP93XX is not set
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMG is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
# CONFIG_PWM_IMX_TPM is not set
# CONFIG_PWM_INTEL_LGM is not set
# CONFIG_PWM_IQS620A is not set
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
CONFIG_PWM_LP3943=m
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
CONFIG_PWM_NTXEC=m
# CONFIG_PWM_OMAP_DMTIMER is not set
CONFIG_PWM_PCA9685=m
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SAMSUNG is not set
# CONFIG_PWM_SIFIVE is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPEAR is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STI is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_SUNPLUS is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
# CONFIG_PWM_VISCONTI is not set
# CONFIG_PWM_VT8500 is not set
# CONFIG_PWM_XILINX is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
CONFIG_XILINX_INTC=y
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_IMX_MU_MSI is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_BRCMSTB is not set
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
# CONFIG_RESET_SCMI is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
CONFIG_RESET_TI_SYSCON=y
# CONFIG_RESET_TI_TPS380X is not set
# CONFIG_RESET_TN48M_CPLD is not set
# CONFIG_RESET_UNIPHIER is not set
# CONFIG_RESET_UNIPHIER_GLUE is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
CONFIG_PHY_CAN_TRANSCEIVER=y
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
CONFIG_BCM_KONA_USB2_PHY=m
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_BCM_NS_USB3 is not set
# CONFIG_PHY_NS2_PCIE is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=m
CONFIG_PHY_CADENCE_DPHY_RX=m
CONFIG_PHY_CADENCE_SIERRA=m
CONFIG_PHY_CADENCE_SALVO=y
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
# CONFIG_PHY_BERLIN_USB is not set
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
# CONFIG_PHY_MTK_TPHY is not set
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_HDMI is not set
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
CONFIG_PHY_LAN966X_SERDES=y
CONFIG_PHY_OCELOT_SERDES=y
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_R8A779F0_ETHERNET_SERDES is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB3 is not set
# CONFIG_PHY_UNIPHIER_PCIE is not set
# CONFIG_PHY_UNIPHIER_AHCI is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_SUNPLUS_USB is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# CONFIG_ARM_CCN is not set
# CONFIG_ARM_CMN is not set
# CONFIG_FSL_IMX8_DDR_PMU is not set
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
# CONFIG_MESON_DDR_PMU is not set
# end of Performance monitor support
CONFIG_RAS=y
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
CONFIG_DAX=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
CONFIG_NVMEM_RAVE_SP_EEPROM=m
CONFIG_NVMEM_RMEM=m
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
CONFIG_NVMEM_SPMI_SDAM=m
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_U_BOOT_ENV is not set
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set
#
# HW tracing support
#
CONFIG_STM=m
CONFIG_STM_PROTO_BASIC=m
CONFIG_STM_PROTO_SYS_T=m
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=m
# CONFIG_STM_SOURCE_HEARTBEAT is not set
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_GTH=m
# CONFIG_INTEL_TH_STH is not set
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
# CONFIG_FPGA is not set
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
# CONFIG_FSI_MASTER_GPIO is not set
CONFIG_FSI_MASTER_HUB=y
CONFIG_FSI_MASTER_ASPEED=m
CONFIG_FSI_SCOM=m
CONFIG_FSI_SBEFIFO=y
# CONFIG_FSI_OCC is not set
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
CONFIG_MUX_GPIO=m
CONFIG_MUX_MMIO=m
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=m
# CONFIG_SIOX_BUS_GPIO is not set
# CONFIG_SLIMBUS is not set
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=y
# CONFIG_104_QUAD_8 is not set
# CONFIG_FTM_QUADDEC is not set
CONFIG_INTERRUPT_CNT=m
CONFIG_MICROCHIP_TCB_CAPTURE=y
# CONFIG_STM32_LPTIMER_CNT is not set
# CONFIG_STM32_TIMER_CNT is not set
# CONFIG_TI_ECAP_CAPTURE is not set
# CONFIG_TI_EQEP is not set
CONFIG_MOST=y
CONFIG_MOST_CDEV=m
CONFIG_PECI=y
CONFIG_PECI_CPU=m
# CONFIG_PECI_ASPEED is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
# CONFIG_FSCACHE is not set
# end of Caches
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ECRYPT_FS=y
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
# CONFIG_JFFS2_FS_POSIX_ACL is not set
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=y
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_MTD=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=m
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=m
CONFIG_PSTORE_LZ4_COMPRESS=m
CONFIG_PSTORE_LZ4HC_COMPRESS=m
CONFIG_PSTORE_842_COMPRESS=y
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="lzo"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_RAM is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
# CONFIG_SUNRPC_XPRT_RDMA is not set
CONFIG_CEPH_FS=m
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
# CONFIG_CIFS is not set
CONFIG_SMB_SERVER=y
# CONFIG_SMB_SERVER_CHECK_CAP_NET_ADMIN is not set
# CONFIG_SMB_SERVER_KERBEROS5 is not set
CONFIG_SMBFS_COMMON=y
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
CONFIG_AFS_DEBUG_CURSOR=y
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=m
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=m
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=m
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=m
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=y
CONFIG_DLM=m
CONFIG_DLM_DEPRECATED_API=y
# CONFIG_DLM_DEBUG is not set
CONFIG_UNICODE=m
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_KEY_NOTIFICATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_INFINIBAND=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_DEBUG=y
CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS=y
CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES=y
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
# CONFIG_SECURITY_APPARMOR_HASH_DEFAULT is not set
# CONFIG_SECURITY_APPARMOR_EXPORT_BINARY is not set
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_SAFESETID=y
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
CONFIG_SECURITY_LANDLOCK=y
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set
CONFIG_IMA_DEFAULT_HASH_SHA256=y
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha256"
CONFIG_IMA_WRITE_POLICY=y
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_APPRAISE_BOOTPARAM is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_DISABLE_HTABLE=y
CONFIG_EVM=y
# CONFIG_EVM_ATTR_FSUUID is not set
# CONFIG_EVM_ADD_XATTRS is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization
CONFIG_CC_HAS_RANDSTRUCT=y
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# end of Kernel hardening options
# end of Security options
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
CONFIG_CRYPTO_CURVE25519=m
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARIA=m
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SM4=m
CONFIG_CRYPTO_SM4_GENERIC=m
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=y
CONFIG_CRYPTO_KEYWRAP=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XCTR=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLYVAL=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=m
CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_STREEBOG=m
# CONFIG_CRYPTO_VMAC is not set
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=m
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=m
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
CONFIG_FIPS_SIGNATURE_SELFTEST=y
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
# CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE is not set
# end of Certificates for signature checking
#
# Library routines
#
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_GF128MUL=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=m
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=m
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=m
# CONFIG_XZ_DEC is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BCH=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_DMA_GLOBAL_POOL=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_DMA_API_DEBUG_SG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=m
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_6x10=y
CONFIG_FONT_10x18=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_TER16x32 is not set
CONFIG_FONT_6x8=y
CONFIG_STACKDEPOT=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines
CONFIG_POLYNOMIAL=m
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_SYMBOLIC_ERRNAME is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED_NONE=y
# CONFIG_DEBUG_INFO_COMPRESSED_ZLIB is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_PAHOLE_HAS_BTF_TAG=y
CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_CC_HAS_UBSAN_ARRAY_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ARRAY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_UNREACHABLE is not set
CONFIG_UBSAN_BOOL=y
# CONFIG_UBSAN_ENUM is not set
CONFIG_TEST_UBSAN=m
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
# CONFIG_WQ_WATCHDOG is not set
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=m
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=m
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_CPU_STALL_CPUTIME is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_LATENCYTOP is not set
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
#
# hexagon Debugging
#
# end of hexagon Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT is not set
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_RUNTIME_TESTING_MENU is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
#
# Documentation
#
# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Documentation
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [PATCH v2] lsm: adds process attribute getter for Landlock
2023-05-18 20:45 ` [PATCH v2] lsm: adds process attribute getter " Shervin Oloumi
2023-05-18 21:26 ` Casey Schaufler
2023-05-19 5:22 ` kernel test robot
@ 2023-05-24 16:48 ` Mickaël Salaün
2 siblings, 0 replies; 32+ messages in thread
From: Mickaël Salaün @ 2023-05-24 16:48 UTC (permalink / raw)
To: Shervin Oloumi, Casey Schaufler, Paul Moore
Cc: linux-security-module, jorgelo, keescook, groeck, jeffxu,
allenwebb, gnoack3000, areber, criu, linux-api, jannh, brauner
On 18/05/2023 22:45, Shervin Oloumi wrote:
> Adds a new getprocattr hook function to the Landlock LSM, which tracks
> the landlocked state of the process. This is invoked when user-space
> reads /proc/[pid]/attr/domain to determine whether a given process is
> sand-boxed using Landlock. When the target process is not sand-boxed,
> the result is "none", otherwise the result is empty, as we still need to
> decide what kind of domain information is best to provide in "domain".
>
> The hook function also performs an access check. The request is rejected
> if the tracing process is the same as the target process, or if the
> tracing process domain is not an ancestor to the target process domain.
>
> Adds a new directory for landlock under the process attribute
> filesystem, and defines "domain" as a read-only process attribute entry
> for landlock.
>
> Signed-off-by: Shervin Oloumi <enlightened@chromium.org>
> ---
> fs/proc/base.c | 11 +++++++++++
> security/landlock/fs.c | 38 ++++++++++++++++++++++++++++++++++++++
> security/landlock/fs.h | 1 +
> security/landlock/ptrace.c | 4 ++--
> security/landlock/ptrace.h | 3 +++
> 5 files changed, 55 insertions(+), 2 deletions(-)
>
> diff --git a/fs/proc/base.c b/fs/proc/base.c
> index 9e479d7d202b..b257ea704666 100644
> --- a/fs/proc/base.c
> +++ b/fs/proc/base.c
> @@ -2851,6 +2851,13 @@ static const struct pid_entry apparmor_attr_dir_stuff[] = {
> LSM_DIR_OPS(apparmor);
> #endif
>
> +#ifdef CONFIG_SECURITY_LANDLOCK
> +static const struct pid_entry landlock_attr_dir_stuff[] = {
> + ATTR("landlock", "domain", 0444),
> +};
> +LSM_DIR_OPS(landlock);
> +#endif
> +
> static const struct pid_entry attr_dir_stuff[] = {
> ATTR(NULL, "current", 0666),
> ATTR(NULL, "prev", 0444),
> @@ -2866,6 +2873,10 @@ static const struct pid_entry attr_dir_stuff[] = {
> DIR("apparmor", 0555,
> proc_apparmor_attr_dir_inode_ops, proc_apparmor_attr_dir_ops),
> #endif
> +#ifdef CONFIG_SECURITY_LANDLOCK
> + DIR("landlock", 0555,
> + proc_landlock_attr_dir_inode_ops, proc_landlock_attr_dir_ops),
> +#endif
> };
>
> static int proc_attr_dir_readdir(struct file *file, struct dir_context *ctx)
> diff --git a/security/landlock/fs.c b/security/landlock/fs.c
> index adcea0fe7e68..2f8b0837a0fd 100644
> --- a/security/landlock/fs.c
> +++ b/security/landlock/fs.c
> @@ -1280,6 +1280,42 @@ static int hook_file_truncate(struct file *const file)
> return -EACCES;
> }
>
> +/* process attribute interfaces */
> +
> +/**
> + * landlock_getprocattr - Landlock process attribute getter
> + * @task: the object task
> + * @name: the name of the attribute in /proc/.../attr
> + * @value: where to put the result
> + *
> + * Performs access checks and writes any applicable results to value
> + *
> + * Returns the length of the result inside value or an error code
> + */
> +static int landlock_getprocattr(struct task_struct *task, const char *name,
> + char **value)
> +{
> + char *val = "";
> + int slen;
> +
> + // If the tracing process is landlocked, ensure its domain is an
> + // ancestor to the target process domain.
> + if (landlocked(current))
> + if (current == task || !task_is_scoped(current, task))
ptrace_may_access() checks more things than task_is_scoped(), but we
should also make sure that that the current domain is taken into account
(with a simple domain comparison). Tests should check these cases.
> + return -EACCES;
> +
> + // The only supported attribute is "domain".
> + if (strcmp(name, "domain") != 0)
> + return -EINVAL;
> +
> + if (!landlocked(task))
> + val = "none";
I think the return values, for a dedicated syscall, would be "unknown",
"unrestricted", "restricted". This could just be a returned enum.
> +
> + slen = strlen(val);
> + *value = val;
> + return slen;
> +}
This should be part of the ptrace.c file, which would also avoid
exporting functions.
> +
> static struct security_hook_list landlock_hooks[] __lsm_ro_after_init = {
> LSM_HOOK_INIT(inode_free_security, hook_inode_free_security),
>
> @@ -1302,6 +1338,8 @@ static struct security_hook_list landlock_hooks[] __lsm_ro_after_init = {
> LSM_HOOK_INIT(file_alloc_security, hook_file_alloc_security),
> LSM_HOOK_INIT(file_open, hook_file_open),
> LSM_HOOK_INIT(file_truncate, hook_file_truncate),
> +
> + LSM_HOOK_INIT(getprocattr, landlock_getprocattr),
> };
>
> __init void landlock_add_fs_hooks(void)
> diff --git a/security/landlock/fs.h b/security/landlock/fs.h
> index 488e4813680a..64145e8b5537 100644
> --- a/security/landlock/fs.h
> +++ b/security/landlock/fs.h
> @@ -13,6 +13,7 @@
> #include <linux/init.h>
> #include <linux/rcupdate.h>
>
> +#include "ptrace.h"
> #include "ruleset.h"
> #include "setup.h"
>
> diff --git a/security/landlock/ptrace.c b/security/landlock/ptrace.c
> index 4c5b9cd71286..de943f0f3899 100644
> --- a/security/landlock/ptrace.c
> +++ b/security/landlock/ptrace.c
> @@ -47,8 +47,8 @@ static bool domain_scope_le(const struct landlock_ruleset *const parent,
> return false;
> }
>
> -static bool task_is_scoped(const struct task_struct *const parent,
> - const struct task_struct *const child)
> +const bool task_is_scoped(const struct task_struct *const parent,
> + const struct task_struct *const child)
> {
> bool is_scoped;
> const struct landlock_ruleset *dom_parent, *dom_child;
> diff --git a/security/landlock/ptrace.h b/security/landlock/ptrace.h
> index 265b220ae3bf..c6eb08951fc1 100644
> --- a/security/landlock/ptrace.h
> +++ b/security/landlock/ptrace.h
> @@ -11,4 +11,7 @@
>
> __init void landlock_add_ptrace_hooks(void);
>
> +const bool task_is_scoped(const struct task_struct *const parent,
> + const struct task_struct *const child);
> +
> #endif /* _SECURITY_LANDLOCK_PTRACE_H */
^ permalink raw reply [flat|nested] 32+ messages in thread