Re: fanotify read returns with errno == EOPENSTALE

Re: fanotify read returns with errno == EOPENSTALE

[Amir Goldstein]

On Thu, Mar 23, 2017 at 8:43 AM, Marko Rauhamaa
<marko.rauhamaa-xdZvthzU1HpWk0Htik3J/w@public.gmane.org> wrote:
> Jeff Layton <jlayton-vpEMnDpepFuMZCB2o+C8xQ@public.gmane.org>:
>
>> It was definitely not the intention to leak this error code to
>> userland. EOPENSTALE is not a POSIX sanctioned error code, so
>> applications generally don't know anything about it and will be
>> confused.
>
> Got it. I will try to work on a reproduction and make a proper bug
> report.
>

Try this:

- watch a single file for permissions events (so you will only have
one event in the queue)
- open file from client to generate single event (don't read event yet)
- remove file from server (to make it stale)
- read event (with stale file)

>> I haven't looked closely at this particular problem, but IIRC we
>> usually just translate EOPENSTALE to ESTALE, and that may be all that
>> needs to be done here. If this happened in the RHEL kernel, then
>> please do open a bug with Red Hat and we'll get it straightened out.
>
> ESTALE has not been mentioned as a possible error code from an fanotify
> read. Most importantly, since read fails, I suppose there is no recovery
> but you must close the fanotify fd and call fanotify_init() again. Or
> should I just ignore it and read on? If so, why bother returning the
> error from the kernel in the first place?
>

Oh my. I completely misread your report before.
I though you were trying to read from the event->fd.
Now I understand that  you mean read from fanotify fd.
That will definitely return the error, but  only in the special case
where open error
happened on the first event being read to the buffer.
If error happens after adding some events to the buffer, fanotify
process will not know
about this. Regular event will be silently dropped and permission event will be
denied.

>From fanotify(7) man page BUGS section:

       *  If  a  call  to read(2) processes multiple events from the
fanotify queue
          and an error occurs, the return value will be the total
length of the events
          successfully copied to the user-space buffer before the
error occurred.
          The return value will not be -1, and errno will not be set.
          Thus, the reading application has no way to detect the error.

There is  small subset of open errors that you could get for failure to create
an fd for the event, like  ENODEV/ENXIO and EMFILE.
You do NOT need to call fanotify_init() again, the next read will read
the next event.
(That information might be useful in man page)


>> That said, you should take heed that all of the [fa|i|d]notify APIs do
>> not extend beyond the local machine when you use them on network
>> filesystems. If you're expecting to get notification of events that
>> are occurring on other clients, you're going to be disappointed here.
>
> That certainly is disappointing. However, there is a certain level of
> coherency one would expect, namely:
>
>  * An NFS4 client opening a file should be subject to an OPEN_PERM check
>    on that client (if the client is monitoring the mount point).
>
>  * An NFS4 client opening a file should be subject to an OPEN_PERM check
>    on the server (if the server is monitoring the mount point).
>
>  * An fanotify read should not fail mysteriously. Rather, a read on
>    metadata->fd should be the one failing.
>

Depending on the error.
If you can't get an fd, how will the event be reported?
With my suggestion to pass filehandle on event, fd is redundant,
so event can be passed with the error on fd field.

Please try to create a reproducer for case where error is returned
and when it is not.

The fix seems trivial and I can post it once you have the test:
- return EAGAIN for read in case of a single event in queue without fd
  so apps getting the read error will have a good idea what to do
- in case of non single event, maybe copy event with error on event->fd
  to the buffer for specific errors that make sense to report (EMFILE)
  so a watcher checks the values of negative event->fd can maybe do
  something about it (e.g. provide a smaller buffer).

Amir.
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: fanotify read returns with errno == EOPENSTALE

[Marko Rauhamaa]

Amir Goldstein <amir73il-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:

> On Thu, Mar 23, 2017 at 8:43 AM, Marko Rauhamaa
> <marko.rauhamaa-xdZvthzU1HpWk0Htik3J/w@public.gmane.org> wrote:
>> Jeff Layton <jlayton-vpEMnDpepFuMZCB2o+C8xQ@public.gmane.org>:
>>
>>> It was definitely not the intention to leak this error code to
>>> userland. EOPENSTALE is not a POSIX sanctioned error code, so
>>> applications generally don't know anything about it and will be
>>> confused.
>>
>> Got it. I will try to work on a reproduction and make a proper bug
>> report.
>
> Try this:
>
> - watch a single file for permissions events (so you will only have
> one event in the queue)
> - open file from client to generate single event (don't read event yet)
> - remove file from server (to make it stale)
> - read event (with stale file)

I did that and reproduced the problem on a recent development kernel.
Happens every time.

Just take the example program listed under "man fanotify" ("fantest")
and follow these steps:

    ==============================================================
    NFS Server    NFS Client(1)     NFS Client(2)
    ==============================================================
    # echo foo >/nfsshare/bar.txt
                  # cat /nfsshare/bar.txt
                  foo
                                    # ./fantest /nfsshare
                                    Press enter key to terminate.
                                    Listening for events.
    # rm -f /nfsshare/bar.txt
                  # cat /nfsshare/bar.txt
                                    read: Unknown error 518
                  cat: /nfsshare/bar.txt: Operation not permitted
    ==============================================================

where NFS Client (1) and (2) are two terminal sessions on a single NFS
Client machine.

So what do we conclude? Is this a kernel bug or works as designed?

> Oh my. I completely misread your report before. I though you were
> trying to read from the event->fd. Now I understand that you mean read
> from fanotify fd. That will definitely return the error, but only in
> the special case where open error happened on the first event being
> read to the buffer. If error happens after adding some events to the
> buffer, fanotify process will not know about this. Regular event will
> be silently dropped and permission event will be denied.
>
> [...]
>
> You do NOT need to call fanotify_init() again, the next read will read
> the next event.

It does appear that reading the fanotify fd again does the trick. 

However, the client gets an EPERM instead of ENOENT, which is a bit
weird.

> The fix seems trivial and I can post it once you have the test:
> - return EAGAIN for read in case of a single event in queue without fd
>   so apps getting the read error will have a good idea what to do
> - in case of non single event, maybe copy event with error on event->fd
>   to the buffer for specific errors that make sense to report (EMFILE)
>   so a watcher checks the values of negative event->fd can maybe do
>   something about it (e.g. provide a smaller buffer).

EAGAIN would be perfect for me since I'm using fanotify in a nonblocking
mode. It might be a bit surprising in the blocking case.


Marko

-- 
+358 44 990 4795
Skype: marko.rauhamaa_f-secure
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: fanotify read returns with errno == EOPENSTALE

[Amir Goldstein]

On Wed, Apr 19, 2017 at 4:46 PM, Marko Rauhamaa
<marko.rauhamaa-xdZvthzU1HpWk0Htik3J/w@public.gmane.org> wrote:
> Amir Goldstein <amir73il-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
>
>> On Thu, Mar 23, 2017 at 8:43 AM, Marko Rauhamaa
>> <marko.rauhamaa-xdZvthzU1HpWk0Htik3J/w@public.gmane.org> wrote:
>>> Jeff Layton <jlayton-vpEMnDpepFuMZCB2o+C8xQ@public.gmane.org>:
>>>
>>>> It was definitely not the intention to leak this error code to
>>>> userland. EOPENSTALE is not a POSIX sanctioned error code, so
>>>> applications generally don't know anything about it and will be
>>>> confused.
>>>
>>> Got it. I will try to work on a reproduction and make a proper bug
>>> report.
>>
>> Try this:
>>
>> - watch a single file for permissions events (so you will only have
>> one event in the queue)
>> - open file from client to generate single event (don't read event yet)
>> - remove file from server (to make it stale)
>> - read event (with stale file)
>
> I did that and reproduced the problem on a recent development kernel.
> Happens every time.
>
> Just take the example program listed under "man fanotify" ("fantest")
> and follow these steps:
>
>     ==============================================================
>     NFS Server    NFS Client(1)     NFS Client(2)
>     ==============================================================
>     # echo foo >/nfsshare/bar.txt
>                   # cat /nfsshare/bar.txt
>                   foo
>                                     # ./fantest /nfsshare
>                                     Press enter key to terminate.
>                                     Listening for events.
>     # rm -f /nfsshare/bar.txt
>                   # cat /nfsshare/bar.txt
>                                     read: Unknown error 518
>                   cat: /nfsshare/bar.txt: Operation not permitted
>     ==============================================================
>
> where NFS Client (1) and (2) are two terminal sessions on a single NFS
> Client machine.
>

Thanks for the reproducer.
I'll try it myself when I get to it.

> So what do we conclude? Is this a kernel bug or works as designed?
>

Exposing EOPENSTALE to userspace is definitely a kernel bug.


>> Oh my. I completely misread your report before. I though you were
>> trying to read from the event->fd. Now I understand that you mean read
>> from fanotify fd. That will definitely return the error, but only in
>> the special case where open error happened on the first event being
>> read to the buffer. If error happens after adding some events to the
>> buffer, fanotify process will not know about this. Regular event will
>> be silently dropped and permission event will be denied.
>>
>> [...]
>>
>> You do NOT need to call fanotify_init() again, the next read will read
>> the next event.
>
> It does appear that reading the fanotify fd again does the trick.
>
> However, the client gets an EPERM instead of ENOENT, which is a bit
> weird.
>

Why would the client get ENOENT? That EOPENSTALE event is already
consumed, the client reads the next event in the queue.

>> The fix seems trivial and I can post it once you have the test:
>> - return EAGAIN for read in case of a single event in queue without fd
>>   so apps getting the read error will have a good idea what to do
>> - in case of non single event, maybe copy event with error on event->fd
>>   to the buffer for specific errors that make sense to report (EMFILE)
>>   so a watcher checks the values of negative event->fd can maybe do
>>   something about it (e.g. provide a smaller buffer).
>
> EAGAIN would be perfect for me since I'm using fanotify in a nonblocking
> mode. It might be a bit surprising in the blocking case.
>
>

Can you please try this patch?
Can you please try it with blocking and non-blocking
Can you please try to add to reproducer the non empty queue case:
- Add another mark on another mount without PERM events in the mask
- Populate other mount with some files
- Before reading from nfsshare, read from other mount to fill the
   event queue, e.g.:
# cat /tmp/foo* /nfsshare/bar.txt /tmp/bar*

This should result (depending on number of files) with
>= 2 buffer reads - first with /tmp/foo* files access
last with /tmp/bar* files access


diff --git a/fs/notify/fanotify/fanotify_user.c
b/fs/notify/fanotify/fanotify_user.c
index 2b37f27..5b14890 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -295,6 +295,17 @@ static ssize_t fanotify_read(struct file *file,
char __user *buf,
                }

                ret = copy_event_to_user(group, kevent, buf);
+               if (unlikely(ret == -EOPENSTALE)) {
+                       /*
+                        * We cannot report events with stale fd so drop it.
+                        * Setting ret/mask to 0 will continue the event loop
+                        * and do the right thing if there are no more events
+                        * to read (i.e. return bytes read, -EAGAIN or wait).
+                        */
+                       kevent->mask = 0;
+                       ret = 0;
+               }
+
                /*
                 * Permission events get queued to wait for response.  Other
                 * events can be destroyed now.

---

Re: fanotify read returns with errno == EOPENSTALE

[Amir Goldstein]

On Thu, Apr 20, 2017 at 2:06 PM, Amir Goldstein <amir73il-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> On Wed, Apr 19, 2017 at 4:46 PM, Marko Rauhamaa
> <marko.rauhamaa-xdZvthzU1HpWk0Htik3J/w@public.gmane.org> wrote:
>> Amir Goldstein <amir73il-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
>>
>>> On Thu, Mar 23, 2017 at 8:43 AM, Marko Rauhamaa
>>> <marko.rauhamaa-xdZvthzU1HpWk0Htik3J/w@public.gmane.org> wrote:
>>>> Jeff Layton <jlayton-vpEMnDpepFuMZCB2o+C8xQ@public.gmane.org>:
>>>>
>>>>> It was definitely not the intention to leak this error code to
>>>>> userland. EOPENSTALE is not a POSIX sanctioned error code, so
>>>>> applications generally don't know anything about it and will be
>>>>> confused.
>>>>
>>>> Got it. I will try to work on a reproduction and make a proper bug
>>>> report.
>>>
>>> Try this:
>>>
>>> - watch a single file for permissions events (so you will only have
>>> one event in the queue)
>>> - open file from client to generate single event (don't read event yet)
>>> - remove file from server (to make it stale)
>>> - read event (with stale file)
>>
>> I did that and reproduced the problem on a recent development kernel.
>> Happens every time.
>>
>> Just take the example program listed under "man fanotify" ("fantest")
>> and follow these steps:
>>
>>     ==============================================================
>>     NFS Server    NFS Client(1)     NFS Client(2)
>>     ==============================================================
>>     # echo foo >/nfsshare/bar.txt
>>                   # cat /nfsshare/bar.txt
>>                   foo
>>                                     # ./fantest /nfsshare
>>                                     Press enter key to terminate.
>>                                     Listening for events.
>>     # rm -f /nfsshare/bar.txt
>>                   # cat /nfsshare/bar.txt
>>                                     read: Unknown error 518
>>                   cat: /nfsshare/bar.txt: Operation not permitted
>>     ==============================================================
>>
>> where NFS Client (1) and (2) are two terminal sessions on a single NFS
>> Client machine.
>>
>
> Thanks for the reproducer.
> I'll try it myself when I get to it.
>
>> So what do we conclude? Is this a kernel bug or works as designed?
>>
>
> Exposing EOPENSTALE to userspace is definitely a kernel bug.
>
>
>>> Oh my. I completely misread your report before. I though you were
>>> trying to read from the event->fd. Now I understand that you mean read
>>> from fanotify fd. That will definitely return the error, but only in
>>> the special case where open error happened on the first event being
>>> read to the buffer. If error happens after adding some events to the
>>> buffer, fanotify process will not know about this. Regular event will
>>> be silently dropped and permission event will be denied.
>>>
>>> [...]
>>>
>>> You do NOT need to call fanotify_init() again, the next read will read
>>> the next event.
>>
>> It does appear that reading the fanotify fd again does the trick.
>>
>> However, the client gets an EPERM instead of ENOENT, which is a bit
>> weird.
>>
>
> Why would the client get ENOENT? That EOPENSTALE event is already
> consumed, the client reads the next event in the queue.

Sorry, I keep confusing when you refer to read of file and read of fanotify fd
when kernel fails to get response from fanotify daemon it will deny access
to file. That's the default.

>
>>> The fix seems trivial and I can post it once you have the test:
>>> - return EAGAIN for read in case of a single event in queue without fd
>>>   so apps getting the read error will have a good idea what to do
>>> - in case of non single event, maybe copy event with error on event->fd
>>>   to the buffer for specific errors that make sense to report (EMFILE)
>>>   so a watcher checks the values of negative event->fd can maybe do
>>>   something about it (e.g. provide a smaller buffer).
>>
>> EAGAIN would be perfect for me since I'm using fanotify in a nonblocking
>> mode. It might be a bit surprising in the blocking case.
>>
>>
>
> Can you please try this patch?
> Can you please try it with blocking and non-blocking
> Can you please try to add to reproducer the non empty queue case:
> - Add another mark on another mount without PERM events in the mask
> - Populate other mount with some files
> - Before reading from nfsshare, read from other mount to fill the
>    event queue, e.g.:
> # cat /tmp/foo* /nfsshare/bar.txt /tmp/bar*
>
> This should result (depending on number of files) with
>>= 2 buffer reads - first with /tmp/foo* files access
> last with /tmp/bar* files access
>
>

Sorry I messed up the previous patch. please try this one:

diff --git a/fs/notify/fanotify/fanotify_user.c
b/fs/notify/fanotify/fanotify_user.c
index 2b37f27..7864354 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -295,6 +295,16 @@ static ssize_t fanotify_read(struct file *file,
char __user *buf,
                }

                ret = copy_event_to_user(group, kevent, buf);
+               if (unlikely(ret == -EOPENSTALE)) {
+                       /*
+                        * We cannot report events with stale fd so drop it.
+                        * Setting ret to 0 will continue the event loop and
+                        * do the right thing if there are no more events to
+                        * read (i.e. return bytes read, -EAGAIN or wait).
+                        */
+                       ret = 0;
+               }
+
                /*
                 * Permission events get queued to wait for response.  Other
                 * events can be destroyed now.
@@ -305,7 +315,7 @@ static ssize_t fanotify_read(struct file *file,
char __user *buf,
                                break;
                } else {
 #ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
-                       if (ret < 0) {
+                       if (ret <= 0) {
                                FANOTIFY_PE(kevent)->response = FAN_DENY;
                                wake_up(&group->fanotify_data.access_waitq);
                                break;
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: fanotify read returns with errno == EOPENSTALE

[Marko Rauhamaa]

Amir Goldstein <amir73il-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:

> Sorry I messed up the previous patch. please try this one:

I will try it.

> +                        * do the right thing if there are no more events to
> +                        * read (i.e. return bytes read, -EAGAIN or wait).

EAGAIN is the right thing to do when FAN_NONBLOCK has been specified.
Without FAN_NONBLOCK, EAGAIN is bound to confuse the application. That
could be documented, of course.

More importantly, does EAGAIN here still guarantee EPOLLET semantics of
epoll(7)? IOW, if I get EAGAIN, I shouldn't have to try read(2)ing the
fanotify fd again before calling epoll_wait(2).


Marko

Re: fanotify read returns with errno == EOPENSTALE

[Amir Goldstein]

On Thu, Apr 20, 2017 at 3:43 PM, Marko Rauhamaa
<marko.rauhamaa-xdZvthzU1HpWk0Htik3J/w@public.gmane.org> wrote:
> Amir Goldstein <amir73il-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
>
>> Sorry I messed up the previous patch. please try this one:
>
> I will try it.
>
>> +                        * do the right thing if there are no more events to
>> +                        * read (i.e. return bytes read, -EAGAIN or wait).
>
> EAGAIN is the right thing to do when FAN_NONBLOCK has been specified.
> Without FAN_NONBLOCK, EAGAIN is bound to confuse the application. That
> could be documented, of course.
>

My comment says "do the right thing ... -EAGAIN or wait", meaning depending
FAN_NONBLOCK. The same code that checks for FAN_NONBLOCK will
take care of that. My patch only takes care of dropping the stale event and
continue to next event. If there is no next event, code will "do the
right thing".

> More importantly, does EAGAIN here still guarantee EPOLLET semantics of
> epoll(7)? IOW, if I get EAGAIN, I shouldn't have to try read(2)ing the
> fanotify fd again before calling epoll_wait(2).
>

Yes, if you get EAGAIN it means there are no more events in the queue,
so shouldn't have to try read again.

Amir.

Re: fanotify read returns with errno == EOPENSTALE

[Jan Kara]

On Thu 20-04-17 14:33:04, Amir Goldstein wrote:
> 
> Sorry I messed up the previous patch. please try this one:
> 
> diff --git a/fs/notify/fanotify/fanotify_user.c
> b/fs/notify/fanotify/fanotify_user.c
> index 2b37f27..7864354 100644
> --- a/fs/notify/fanotify/fanotify_user.c
> +++ b/fs/notify/fanotify/fanotify_user.c
> @@ -295,6 +295,16 @@ static ssize_t fanotify_read(struct file *file,
> char __user *buf,
>                 }
> 
>                 ret = copy_event_to_user(group, kevent, buf);
> +               if (unlikely(ret == -EOPENSTALE)) {
> +                       /*
> +                        * We cannot report events with stale fd so drop it.
> +                        * Setting ret to 0 will continue the event loop and
> +                        * do the right thing if there are no more events to
> +                        * read (i.e. return bytes read, -EAGAIN or wait).
> +                        */
> +                       ret = 0;
> +               }
> +
>                 /*
>                  * Permission events get queued to wait for response.  Other
>                  * events can be destroyed now.
> @@ -305,7 +315,7 @@ static ssize_t fanotify_read(struct file *file,
> char __user *buf,
>                                 break;
>                 } else {
>  #ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
> -                       if (ret < 0) {
> +                       if (ret <= 0) {
>                                 FANOTIFY_PE(kevent)->response = FAN_DENY;
>                                 wake_up(&group->fanotify_data.access_waitq);
>                                 break;

I don't think you want to break out of the reading loop when ret == 0 and
the code might be more readable as:

               if (!(kevent->mask & FAN_ALL_PERM_EVENTS)) {
                        fsnotify_destroy_event(group, kevent);
               } else {
#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
                        if (ret <= 0) {
                                FANOTIFY_PE(kevent)->response = FAN_DENY;
                                wake_up(&group->fanotify_data.access_waitq);
                        } else {
                                spin_lock(&group->notification_lock);
                                list_add_tail(&kevent->list,
                                              &group->fanotify_data.access_list);
                                spin_unlock(&group->notification_lock);
                        }
#endif
                }
                if (ret < 0)
                        break;

Hmm?

								Honza
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

Re: fanotify read returns with errno == EOPENSTALE

[Amir Goldstein]

On Thu, Apr 20, 2017 at 5:20 PM, Jan Kara <jack-AlSwsSmVLrQ@public.gmane.org> wrote:
> On Thu 20-04-17 14:33:04, Amir Goldstein wrote:
>>
>> Sorry I messed up the previous patch. please try this one:
>>
>> diff --git a/fs/notify/fanotify/fanotify_user.c
>> b/fs/notify/fanotify/fanotify_user.c
>> index 2b37f27..7864354 100644
>> --- a/fs/notify/fanotify/fanotify_user.c
>> +++ b/fs/notify/fanotify/fanotify_user.c
>> @@ -295,6 +295,16 @@ static ssize_t fanotify_read(struct file *file,
>> char __user *buf,
>>                 }
>>
>>                 ret = copy_event_to_user(group, kevent, buf);
>> +               if (unlikely(ret == -EOPENSTALE)) {
>> +                       /*
>> +                        * We cannot report events with stale fd so drop it.
>> +                        * Setting ret to 0 will continue the event loop and
>> +                        * do the right thing if there are no more events to
>> +                        * read (i.e. return bytes read, -EAGAIN or wait).
>> +                        */
>> +                       ret = 0;
>> +               }
>> +
>>                 /*
>>                  * Permission events get queued to wait for response.  Other
>>                  * events can be destroyed now.
>> @@ -305,7 +315,7 @@ static ssize_t fanotify_read(struct file *file,
>> char __user *buf,
>>                                 break;
>>                 } else {
>>  #ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
>> -                       if (ret < 0) {
>> +                       if (ret <= 0) {
>>                                 FANOTIFY_PE(kevent)->response = FAN_DENY;
>>                                 wake_up(&group->fanotify_data.access_waitq);
>>                                 break;
>
> I don't think you want to break out of the reading loop when ret == 0 and
> the code might be more readable as:
>
>                if (!(kevent->mask & FAN_ALL_PERM_EVENTS)) {
>                         fsnotify_destroy_event(group, kevent);
>                } else {
> #ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
>                         if (ret <= 0) {
>                                 FANOTIFY_PE(kevent)->response = FAN_DENY;
>                                 wake_up(&group->fanotify_data.access_waitq);
>                         } else {
>                                 spin_lock(&group->notification_lock);
>                                 list_add_tail(&kevent->list,
>                                               &group->fanotify_data.access_list);
>                                 spin_unlock(&group->notification_lock);
>                         }
> #endif
>                 }
>                 if (ret < 0)
>                         break;
>
> Hmm?
>

Right, I missed that.
Thanks.

Re: fanotify read returns with errno == EOPENSTALE

[Marko Rauhamaa]

Amir Goldstein <amir73il-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:

> On Thu, Apr 20, 2017 at 3:43 PM, Marko Rauhamaa
> <marko.rauhamaa-xdZvthzU1HpWk0Htik3J/w@public.gmane.org> wrote:
>> Amir Goldstein <amir73il-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
>>
>>> Sorry I messed up the previous patch. please try this one:
>>
>> I will try it.

Tried it. Superficially, it seems to be working, but...

>> More importantly, does EAGAIN here still guarantee EPOLLET semantics
>> of epoll(7)? IOW, if I get EAGAIN, I shouldn't have to try read(2)ing
>> the fanotify fd again before calling epoll_wait(2).
>
> Yes, if you get EAGAIN it means there are no more events in the queue,
> so shouldn't have to try read again.

I ran into a system hang with our real product that suggests there might
be a problem left. It would be explained if your patch generated an
EAGAIN while there were other events waiting in the queue.

I will have to investigate further.


Marko

-- 
+358 44 990 4795
Skype: marko.rauhamaa_f-secure

Re: fanotify read returns with errno == EOPENSTALE

[Amir Goldstein]

On Thu, Apr 20, 2017 at 6:06 PM, Amir Goldstein <amir73il-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> On Thu, Apr 20, 2017 at 5:20 PM, Jan Kara <jack-AlSwsSmVLrQ@public.gmane.org> wrote:
>> On Thu 20-04-17 14:33:04, Amir Goldstein wrote:
>>>
>>> Sorry I messed up the previous patch. please try this one:
>>>
>>> diff --git a/fs/notify/fanotify/fanotify_user.c
>>> b/fs/notify/fanotify/fanotify_user.c
>>> index 2b37f27..7864354 100644
>>> --- a/fs/notify/fanotify/fanotify_user.c
>>> +++ b/fs/notify/fanotify/fanotify_user.c
>>> @@ -295,6 +295,16 @@ static ssize_t fanotify_read(struct file *file,
>>> char __user *buf,
>>>                 }
>>>
>>>                 ret = copy_event_to_user(group, kevent, buf);
>>> +               if (unlikely(ret == -EOPENSTALE)) {
>>> +                       /*
>>> +                        * We cannot report events with stale fd so drop it.
>>> +                        * Setting ret to 0 will continue the event loop and
>>> +                        * do the right thing if there are no more events to
>>> +                        * read (i.e. return bytes read, -EAGAIN or wait).
>>> +                        */
>>> +                       ret = 0;
>>> +               }
>>> +
>>>                 /*
>>>                  * Permission events get queued to wait for response.  Other
>>>                  * events can be destroyed now.
>>> @@ -305,7 +315,7 @@ static ssize_t fanotify_read(struct file *file,
>>> char __user *buf,
>>>                                 break;
>>>                 } else {
>>>  #ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
>>> -                       if (ret < 0) {
>>> +                       if (ret <= 0) {
>>>                                 FANOTIFY_PE(kevent)->response = FAN_DENY;
>>>                                 wake_up(&group->fanotify_data.access_waitq);
>>>                                 break;
>>
>> I don't think you want to break out of the reading loop when ret == 0 and
>> the code might be more readable as:
>>
>>                if (!(kevent->mask & FAN_ALL_PERM_EVENTS)) {
>>                         fsnotify_destroy_event(group, kevent);
>>                } else {
>> #ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
>>                         if (ret <= 0) {
>>                                 FANOTIFY_PE(kevent)->response = FAN_DENY;
>>                                 wake_up(&group->fanotify_data.access_waitq);
>>                         } else {
>>                                 spin_lock(&group->notification_lock);
>>                                 list_add_tail(&kevent->list,
>>                                               &group->fanotify_data.access_list);
>>                                 spin_unlock(&group->notification_lock);
>>                         }
>> #endif
>>                 }
>>                 if (ret < 0)
>>                         break;
>>
>> Hmm?
>>
>

On Fri, Apr 21, 2017 at 5:27 PM, Marko Rauhamaa
<marko.rauhamaa-xdZvthzU1HpWk0Htik3J/w@public.gmane.org> wrote:
> Amir Goldstein <amir73il-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
>
>> Did you notice Jan's comments on my patch? I had a bug that broke out
>> of the loop. Without his corrections read will return even if there
>> are more events in the queue.
>
> Yes, I now tried Jan's fix, and it did the trick.
>
> It will now take months or years before distros have a proper fix. In
> the interim, I will absorb EOPENSTALE and schedule a reread in that
> situation.
>
> Thank you both for your attention.
>
>

Marko,

Were you able to verify that both blocking and non-blocking mode work correctly?
May I add your Tested-by and Reported-by tags?

Thanks!
Amir.

Re: fanotify read returns with errno == EOPENSTALE

[Marko Rauhamaa]

Amir Goldstein <amir73il-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:

> Were you able to verify that both blocking and non-blocking mode work
> correctly? May I add your Tested-by and Reported-by tags?

I have only verified the nonblocking case in my tests (which are by no
means extensive). The reported issue can no longer be reproduced with
the patched kernel, and the regular OPEN_PERM function is still
operational.

Feel free to add me to the tags.


Marko