From: Peter Zijlstra <peterz@infradead.org>
To: will.deacon@arm.com, aneesh.kumar@linux.vnet.ibm.com,
akpm@linux-foundation.org, npiggin@gmail.com
Cc: linux-arch@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, peterz@infradead.org,
linux@armlinux.org.uk, heiko.carstens@de.ibm.com,
riel@surriel.com, David Miller <davem@davemloft.net>,
Guan Xuetao <gxt@pku.edu.cn>
Subject: [PATCH 04/18] asm-generic/tlb: Provide generic VIPT cache flush
Date: Wed, 26 Sep 2018 13:36:27 +0200 [thread overview]
Message-ID: <20180926114800.718627623@infradead.org> (raw)
Message-ID: <20180926113627.ImFF2obntwT8my3NsmfOYRPn2AjfQpP53V2F6wfqPnM@z> (raw)
In-Reply-To: 20180926113623.863696043@infradead.org
The one obvious thing SH and ARM want is a sensible default for
tlb_start_vma(). (also: https://lkml.org/lkml/2004/1/15/6 )
Avoid all VIPT architectures providing their own tlb_start_vma()
implementation and rely on architectures to provide a no-op
flush_cache_range() when it is not relevant.
The below makes tlb_start_vma() default to flush_cache_range(), which
should be right and sufficient. The only exceptions that I found where
(oddly):
- m68k-mmu
- sparc64
- unicore
Those architectures appear to have flush_cache_range(), but their
current tlb_start_vma() does not call it.
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
arch/arc/include/asm/tlb.h | 9 ---------
arch/mips/include/asm/tlb.h | 9 ---------
arch/nds32/include/asm/tlb.h | 6 ------
arch/nios2/include/asm/tlb.h | 10 ----------
arch/parisc/include/asm/tlb.h | 5 -----
arch/sparc/include/asm/tlb_32.h | 5 -----
arch/xtensa/include/asm/tlb.h | 9 ---------
include/asm-generic/tlb.h | 19 +++++++++++--------
8 files changed, 11 insertions(+), 61 deletions(-)
--- a/arch/arc/include/asm/tlb.h
+++ b/arch/arc/include/asm/tlb.h
@@ -23,15 +23,6 @@ do { \
*
* Note, read http://lkml.org/lkml/2004/1/15/6
*/
-#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
-#define tlb_start_vma(tlb, vma)
-#else
-#define tlb_start_vma(tlb, vma) \
-do { \
- if (!tlb->fullmm) \
- flush_cache_range(vma, vma->vm_start, vma->vm_end); \
-} while(0)
-#endif
#define tlb_end_vma(tlb, vma) \
do { \
--- a/arch/mips/include/asm/tlb.h
+++ b/arch/mips/include/asm/tlb.h
@@ -5,15 +5,6 @@
#include <asm/cpu-features.h>
#include <asm/mipsregs.h>
-/*
- * MIPS doesn't need any special per-pte or per-vma handling, except
- * we need to flush cache for area to be unmapped.
- */
-#define tlb_start_vma(tlb, vma) \
- do { \
- if (!tlb->fullmm) \
- flush_cache_range(vma, vma->vm_start, vma->vm_end); \
- } while (0)
#define tlb_end_vma(tlb, vma) do { } while (0)
#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
--- a/arch/nds32/include/asm/tlb.h
+++ b/arch/nds32/include/asm/tlb.h
@@ -4,12 +4,6 @@
#ifndef __ASMNDS32_TLB_H
#define __ASMNDS32_TLB_H
-#define tlb_start_vma(tlb,vma) \
- do { \
- if (!tlb->fullmm) \
- flush_cache_range(vma, vma->vm_start, vma->vm_end); \
- } while (0)
-
#define tlb_end_vma(tlb,vma) \
do { \
if(!tlb->fullmm) \
--- a/arch/nios2/include/asm/tlb.h
+++ b/arch/nios2/include/asm/tlb.h
@@ -15,16 +15,6 @@
extern void set_mmu_pid(unsigned long pid);
-/*
- * NiosII doesn't need any special per-pte or per-vma handling, except
- * we need to flush cache for the area to be unmapped.
- */
-#define tlb_start_vma(tlb, vma) \
- do { \
- if (!tlb->fullmm) \
- flush_cache_range(vma, vma->vm_start, vma->vm_end); \
- } while (0)
-
#define tlb_end_vma(tlb, vma) do { } while (0)
#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
--- a/arch/parisc/include/asm/tlb.h
+++ b/arch/parisc/include/asm/tlb.h
@@ -7,11 +7,6 @@ do { if ((tlb)->fullmm) \
flush_tlb_mm((tlb)->mm);\
} while (0)
-#define tlb_start_vma(tlb, vma) \
-do { if (!(tlb)->fullmm) \
- flush_cache_range(vma, vma->vm_start, vma->vm_end); \
-} while (0)
-
#define tlb_end_vma(tlb, vma) \
do { if (!(tlb)->fullmm) \
flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
--- a/arch/sparc/include/asm/tlb_32.h
+++ b/arch/sparc/include/asm/tlb_32.h
@@ -2,11 +2,6 @@
#ifndef _SPARC_TLB_H
#define _SPARC_TLB_H
-#define tlb_start_vma(tlb, vma) \
-do { \
- flush_cache_range(vma, vma->vm_start, vma->vm_end); \
-} while (0)
-
#define tlb_end_vma(tlb, vma) \
do { \
flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
--- a/arch/xtensa/include/asm/tlb.h
+++ b/arch/xtensa/include/asm/tlb.h
@@ -16,19 +16,10 @@
#if (DCACHE_WAY_SIZE <= PAGE_SIZE)
-/* Note, read http://lkml.org/lkml/2004/1/15/6 */
-
-# define tlb_start_vma(tlb,vma) do { } while (0)
# define tlb_end_vma(tlb,vma) do { } while (0)
#else
-# define tlb_start_vma(tlb, vma) \
- do { \
- if (!tlb->fullmm) \
- flush_cache_range(vma, vma->vm_start, vma->vm_end); \
- } while(0)
-
# define tlb_end_vma(tlb, vma) \
do { \
if (!tlb->fullmm) \
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -19,6 +19,7 @@
#include <linux/swap.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
#ifdef CONFIG_MMU
@@ -351,17 +352,19 @@ static inline unsigned long tlb_get_unma
* the vmas are adjusted to only cover the region to be torn down.
*/
#ifndef tlb_start_vma
-#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_start_vma(tlb, vma) \
+do { \
+ if (!tlb->fullmm) \
+ flush_cache_range(vma, vma->vm_start, vma->vm_end); \
+} while (0)
#endif
-#define __tlb_end_vma(tlb, vma) \
- do { \
- if (!tlb->fullmm) \
- tlb_flush_mmu_tlbonly(tlb); \
- } while (0)
-
#ifndef tlb_end_vma
-#define tlb_end_vma __tlb_end_vma
+#define tlb_end_vma(tlb, vma) \
+do { \
+ if (!tlb->fullmm) \
+ tlb_flush_mmu_tlbonly(tlb); \
+} while (0)
#endif
#ifndef __tlb_remove_tlb_entry
next prev parent reply other threads:[~2018-09-26 18:07 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-26 11:36 [PATCH 00/18] my generic mmu_gather patches Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 01/18] asm-generic/tlb: Provide a comment Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 02/18] asm-generic/tlb: Provide HAVE_MMU_GATHER_PAGE_SIZE Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 03/18] x86/mm: Page size aware flush_tlb_mm_range() Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra [this message]
2018-09-26 11:36 ` [PATCH 04/18] asm-generic/tlb: Provide generic VIPT cache flush Peter Zijlstra
2018-09-26 11:36 ` [PATCH 05/18] asm-generic/tlb: Provide generic tlb_flush Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 12:53 ` Will Deacon
2018-09-26 12:53 ` Will Deacon
2018-09-26 13:11 ` Peter Zijlstra
2018-09-26 13:11 ` Peter Zijlstra
2018-09-26 18:07 ` Peter Zijlstra
2018-09-26 18:07 ` Peter Zijlstra
2018-09-27 12:14 ` Will Deacon
2018-09-27 12:14 ` Will Deacon
2018-09-26 11:36 ` [PATCH 06/18] asm-generic/tlb: Conditionally provide tlb_migrate_finish() Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 12:53 ` Will Deacon
2018-09-26 12:53 ` Will Deacon
2018-09-26 11:36 ` [PATCH 07/18] asm-generic/tlb: Invert HAVE_RCU_TABLE_INVALIDATE Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 08/18] arm/tlb: Convert to generic mmu_gather Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 12:54 ` Will Deacon
2018-09-26 12:54 ` Will Deacon
2018-09-26 11:36 ` [PATCH 09/18] ia64/tlb: Conver " Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 10/18] sh/tlb: Convert SH " Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 11/18] um/tlb: Convert " Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 12/18] arch/tlb: Clean up simple architectures Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-10-03 17:03 ` Vineet Gupta
2018-10-03 17:03 ` Vineet Gupta
2018-10-11 15:04 ` Peter Zijlstra
2018-10-11 15:04 ` Peter Zijlstra
2018-10-12 19:40 ` Vineet Gupta
2018-10-12 19:40 ` Vineet Gupta
2018-10-15 14:14 ` Peter Zijlstra
2018-10-15 14:14 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 13/18] asm-generic/tlb: Introduce HAVE_MMU_GATHER_NO_GATHER Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-12-11 5:43 ` Aneesh Kumar K.V
2018-12-11 5:43 ` Aneesh Kumar K.V
2018-09-26 11:36 ` [PATCH 14/18] s390/tlb: convert to generic mmu_gather Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 15/18] asm-generic/tlb: Remove arch_tlb*_mmu() Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 16/18] asm-generic/tlb: Remove HAVE_GENERIC_MMU_GATHER Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 17/18] asm-generic/tlb: Remove tlb_flush_mmu_free() Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 11:36 ` [PATCH 18/18] asm-generic/tlb: Remove tlb_table_flush() Peter Zijlstra
2018-09-26 11:36 ` Peter Zijlstra
2018-09-26 12:47 ` [PATCH 00/18] my generic mmu_gather patches Will Deacon
2018-09-26 12:47 ` Will Deacon
2018-12-11 5:50 ` Aneesh Kumar K.V
2018-12-11 5:50 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180926114800.718627623@infradead.org \
--to=peterz@infradead.org \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=davem@davemloft.net \
--cc=gxt@pku.edu.cn \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux@armlinux.org.uk \
--cc=npiggin@gmail.com \
--cc=riel@surriel.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).