From: Christophe LEROY <christophe.leroy@c-s.fr> To: Nicholas Piggin <npiggin@gmail.com>, linuxppc-dev@lists.ozlabs.org Cc: linux-arch@vger.kernel.org, Nicolas Pitre <nico@fluxnic.net>, linux-kbuild@vger.kernel.org Subject: Re: [PATCH 4/4] powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected Date: Fri, 20 Apr 2018 12:39:52 +0200 [thread overview] Message-ID: <e01983b0-383b-579a-ed28-0f148ce1b6ca@c-s.fr> (raw) In-Reply-To: <20180420073414.23169-5-npiggin@gmail.com> Le 20/04/2018 à 09:34, Nicholas Piggin a écrit : > This requires further changes to linker script to KEEP some tables > and wildcard compiler generated sections into the right place. This > includes pp32 modifications from Christophe Leroy. > > When compiling powernv_defconfig with this option: > > text data bss dec filename > 11827621 4810490 1341080 17979191 vmlinux > 11752437 4598858 1338776 17690071 vmlinux.dcde > > Resulting kernel is almost 400kB smaller (and still boots). > > [ppc32 numbers here] > > Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested on MPC885 and MPC8321E, CONFIG_MODULE unset. Christophe > --- > arch/powerpc/Kconfig | 1 + > arch/powerpc/kernel/vmlinux.lds.S | 22 +++++++++++----------- > 2 files changed, 12 insertions(+), 11 deletions(-) > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > index c32a181a7cbb..ee6dbe2efc8b 100644 > --- a/arch/powerpc/Kconfig > +++ b/arch/powerpc/Kconfig > @@ -205,6 +205,7 @@ config PPC > select HAVE_KPROBES > select HAVE_KPROBES_ON_FTRACE > select HAVE_KRETPROBES > + select HAVE_LD_DEAD_CODE_DATA_ELIMINATION > select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS > select HAVE_MEMBLOCK > select HAVE_MEMBLOCK_NODE_MAP > diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S > index c8af90ff49f0..89381dc959ce 100644 > --- a/arch/powerpc/kernel/vmlinux.lds.S > +++ b/arch/powerpc/kernel/vmlinux.lds.S > @@ -89,7 +89,7 @@ SECTIONS > */ > .text BLOCK(0) : AT(ADDR(.text) - LOAD_OFFSET) { > #ifdef CONFIG_LD_HEAD_STUB_CATCH > - *(.linker_stub_catch); > + KEEP(*(.linker_stub_catch)); > . = . ; > #endif > > @@ -98,7 +98,7 @@ SECTIONS > ALIGN_FUNCTION(); > #endif > /* careful! __ftr_alt_* sections need to be close to .text */ > - *(.text.hot .text .text.fixup .text.unlikely .fixup __ftr_alt_* .ref.text); > + *(.text.hot .text .text.[0-9a-zA-Z_]* .text.fixup .text.unlikely .fixup __ftr_alt_* .ref.text); > SCHED_TEXT > CPUIDLE_TEXT > LOCK_TEXT > @@ -170,10 +170,10 @@ SECTIONS > .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { > INIT_DATA > __vtop_table_begin = .; > - *(.vtop_fixup); > + KEEP(*(.vtop_fixup)); > __vtop_table_end = .; > __ptov_table_begin = .; > - *(.ptov_fixup); > + KEEP(*(.ptov_fixup)); > __ptov_table_end = .; > } > > @@ -194,26 +194,26 @@ SECTIONS > . = ALIGN(8); > __ftr_fixup : AT(ADDR(__ftr_fixup) - LOAD_OFFSET) { > __start___ftr_fixup = .; > - *(__ftr_fixup) > + KEEP(*(__ftr_fixup)) > __stop___ftr_fixup = .; > } > . = ALIGN(8); > __mmu_ftr_fixup : AT(ADDR(__mmu_ftr_fixup) - LOAD_OFFSET) { > __start___mmu_ftr_fixup = .; > - *(__mmu_ftr_fixup) > + KEEP(*(__mmu_ftr_fixup)) > __stop___mmu_ftr_fixup = .; > } > . = ALIGN(8); > __lwsync_fixup : AT(ADDR(__lwsync_fixup) - LOAD_OFFSET) { > __start___lwsync_fixup = .; > - *(__lwsync_fixup) > + KEEP(*(__lwsync_fixup)) > __stop___lwsync_fixup = .; > } > #ifdef CONFIG_PPC64 > . = ALIGN(8); > __fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) { > __start___fw_ftr_fixup = .; > - *(__fw_ftr_fixup) > + KEEP(*(__fw_ftr_fixup)) > __stop___fw_ftr_fixup = .; > } > #endif > @@ -226,7 +226,7 @@ SECTIONS > . = ALIGN(8); > .machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) { > __machine_desc_start = . ; > - *(.machine.desc) > + KEEP(*(.machine.desc)) > __machine_desc_end = . ; > } > #ifdef CONFIG_RELOCATABLE > @@ -274,7 +274,7 @@ SECTIONS > .data : AT(ADDR(.data) - LOAD_OFFSET) { > DATA_DATA > *(.data.rel*) > - *(.sdata) > + *(SDATA_MAIN) > *(.sdata2) > *(.got.plt) *(.got) > *(.plt) > @@ -289,7 +289,7 @@ SECTIONS > > .opd : AT(ADDR(.opd) - LOAD_OFFSET) { > __start_opd = .; > - *(.opd) > + KEEP(*(.opd)) > __end_opd = .; > } > >
WARNING: multiple messages have this Message-ID (diff)
From: Christophe LEROY <christophe.leroy@c-s.fr> To: Nicholas Piggin <npiggin@gmail.com>, linuxppc-dev@lists.ozlabs.org Cc: linux-arch@vger.kernel.org, linux-kbuild@vger.kernel.org, Nicolas Pitre <nico@fluxnic.net> Subject: Re: [PATCH 4/4] powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected Date: Fri, 20 Apr 2018 12:39:52 +0200 [thread overview] Message-ID: <e01983b0-383b-579a-ed28-0f148ce1b6ca@c-s.fr> (raw) Message-ID: <20180420103952.EOSIn-kU4gg02g4eURvuUpVM1pBh9G_FfMDvHLu_ST8@z> (raw) In-Reply-To: <20180420073414.23169-5-npiggin@gmail.com> Le 20/04/2018 à 09:34, Nicholas Piggin a écrit : > This requires further changes to linker script to KEEP some tables > and wildcard compiler generated sections into the right place. This > includes pp32 modifications from Christophe Leroy. > > When compiling powernv_defconfig with this option: > > text data bss dec filename > 11827621 4810490 1341080 17979191 vmlinux > 11752437 4598858 1338776 17690071 vmlinux.dcde > > Resulting kernel is almost 400kB smaller (and still boots). > > [ppc32 numbers here] > > Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested on MPC885 and MPC8321E, CONFIG_MODULE unset. Christophe > --- > arch/powerpc/Kconfig | 1 + > arch/powerpc/kernel/vmlinux.lds.S | 22 +++++++++++----------- > 2 files changed, 12 insertions(+), 11 deletions(-) > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > index c32a181a7cbb..ee6dbe2efc8b 100644 > --- a/arch/powerpc/Kconfig > +++ b/arch/powerpc/Kconfig > @@ -205,6 +205,7 @@ config PPC > select HAVE_KPROBES > select HAVE_KPROBES_ON_FTRACE > select HAVE_KRETPROBES > + select HAVE_LD_DEAD_CODE_DATA_ELIMINATION > select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS > select HAVE_MEMBLOCK > select HAVE_MEMBLOCK_NODE_MAP > diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S > index c8af90ff49f0..89381dc959ce 100644 > --- a/arch/powerpc/kernel/vmlinux.lds.S > +++ b/arch/powerpc/kernel/vmlinux.lds.S > @@ -89,7 +89,7 @@ SECTIONS > */ > .text BLOCK(0) : AT(ADDR(.text) - LOAD_OFFSET) { > #ifdef CONFIG_LD_HEAD_STUB_CATCH > - *(.linker_stub_catch); > + KEEP(*(.linker_stub_catch)); > . = . ; > #endif > > @@ -98,7 +98,7 @@ SECTIONS > ALIGN_FUNCTION(); > #endif > /* careful! __ftr_alt_* sections need to be close to .text */ > - *(.text.hot .text .text.fixup .text.unlikely .fixup __ftr_alt_* .ref.text); > + *(.text.hot .text .text.[0-9a-zA-Z_]* .text.fixup .text.unlikely .fixup __ftr_alt_* .ref.text); > SCHED_TEXT > CPUIDLE_TEXT > LOCK_TEXT > @@ -170,10 +170,10 @@ SECTIONS > .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { > INIT_DATA > __vtop_table_begin = .; > - *(.vtop_fixup); > + KEEP(*(.vtop_fixup)); > __vtop_table_end = .; > __ptov_table_begin = .; > - *(.ptov_fixup); > + KEEP(*(.ptov_fixup)); > __ptov_table_end = .; > } > > @@ -194,26 +194,26 @@ SECTIONS > . = ALIGN(8); > __ftr_fixup : AT(ADDR(__ftr_fixup) - LOAD_OFFSET) { > __start___ftr_fixup = .; > - *(__ftr_fixup) > + KEEP(*(__ftr_fixup)) > __stop___ftr_fixup = .; > } > . = ALIGN(8); > __mmu_ftr_fixup : AT(ADDR(__mmu_ftr_fixup) - LOAD_OFFSET) { > __start___mmu_ftr_fixup = .; > - *(__mmu_ftr_fixup) > + KEEP(*(__mmu_ftr_fixup)) > __stop___mmu_ftr_fixup = .; > } > . = ALIGN(8); > __lwsync_fixup : AT(ADDR(__lwsync_fixup) - LOAD_OFFSET) { > __start___lwsync_fixup = .; > - *(__lwsync_fixup) > + KEEP(*(__lwsync_fixup)) > __stop___lwsync_fixup = .; > } > #ifdef CONFIG_PPC64 > . = ALIGN(8); > __fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) { > __start___fw_ftr_fixup = .; > - *(__fw_ftr_fixup) > + KEEP(*(__fw_ftr_fixup)) > __stop___fw_ftr_fixup = .; > } > #endif > @@ -226,7 +226,7 @@ SECTIONS > . = ALIGN(8); > .machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) { > __machine_desc_start = . ; > - *(.machine.desc) > + KEEP(*(.machine.desc)) > __machine_desc_end = . ; > } > #ifdef CONFIG_RELOCATABLE > @@ -274,7 +274,7 @@ SECTIONS > .data : AT(ADDR(.data) - LOAD_OFFSET) { > DATA_DATA > *(.data.rel*) > - *(.sdata) > + *(SDATA_MAIN) > *(.sdata2) > *(.got.plt) *(.got) > *(.plt) > @@ -289,7 +289,7 @@ SECTIONS > > .opd : AT(ADDR(.opd) - LOAD_OFFSET) { > __start_opd = .; > - *(.opd) > + KEEP(*(.opd)) > __end_opd = .; > } > >
next prev parent reply other threads:[~2018-04-20 10:39 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-20 7:34 [PATCH 0/4] LD_DEAD_CODE_DATA_ELIMINATION fixes and enabling for powerpc Nicholas Piggin 2018-04-20 7:34 ` Nicholas Piggin 2018-04-20 7:34 ` [PATCH 1/4] kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION Nicholas Piggin 2018-04-20 7:34 ` Nicholas Piggin 2018-04-20 7:34 ` [PATCH 2/4] kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build Nicholas Piggin 2018-04-20 7:34 ` Nicholas Piggin 2018-04-20 7:34 ` [PATCH 3/4] kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled Nicholas Piggin 2018-04-20 7:34 ` Nicholas Piggin 2018-04-20 7:34 ` [PATCH 4/4] powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected Nicholas Piggin 2018-04-20 7:34 ` Nicholas Piggin 2018-04-20 10:00 ` Mathieu Malaterre 2018-04-20 10:00 ` Mathieu Malaterre 2018-04-20 10:41 ` Nicholas Piggin 2018-04-20 10:41 ` Nicholas Piggin 2018-04-20 20:08 ` Mathieu Malaterre 2018-04-20 20:08 ` Mathieu Malaterre 2018-04-21 2:48 ` Nicholas Piggin 2018-04-21 2:48 ` Nicholas Piggin 2018-05-02 9:17 ` Mathieu Malaterre 2018-05-02 9:17 ` Mathieu Malaterre 2018-05-02 12:24 ` Nicholas Piggin 2018-05-02 12:24 ` Nicholas Piggin 2018-05-14 19:10 ` Mathieu Malaterre 2018-05-14 19:10 ` Mathieu Malaterre 2018-04-21 7:16 ` christophe leroy 2018-04-21 7:16 ` christophe leroy 2018-04-23 11:01 ` Mathieu Malaterre 2018-04-23 11:01 ` Mathieu Malaterre 2018-05-07 0:46 ` Masahiro Yamada 2018-05-07 0:46 ` Masahiro Yamada 2018-05-07 9:53 ` Nicholas Piggin 2018-05-07 9:53 ` Nicholas Piggin 2018-04-20 10:01 ` Christophe LEROY 2018-04-20 10:01 ` Christophe LEROY 2018-04-20 10:36 ` Nicholas Piggin 2018-04-20 10:36 ` Nicholas Piggin 2018-04-20 13:21 ` Christophe LEROY 2018-04-20 13:21 ` Christophe LEROY 2018-04-20 10:39 ` Christophe LEROY [this message] 2018-04-20 10:39 ` Christophe LEROY 2018-04-20 9:59 ` [PATCH 0/4] LD_DEAD_CODE_DATA_ELIMINATION fixes and enabling for powerpc Mathieu Malaterre 2018-04-20 9:59 ` Mathieu Malaterre 2018-04-20 10:02 ` Christophe LEROY 2018-04-20 10:02 ` Christophe LEROY
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=e01983b0-383b-579a-ed28-0f148ce1b6ca@c-s.fr \ --to=christophe.leroy@c-s.fr \ --cc=linux-arch@vger.kernel.org \ --cc=linux-kbuild@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=nico@fluxnic.net \ --cc=npiggin@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).