* [PATCH 1/2] arm64: dts: exynos7: Add cpu cache information [not found] <CGME20210617113313epcas5p1fb3fff0b301b9e67a771349e72c2445b@epcas5p1.samsung.com> @ 2021-06-17 11:37 ` Alim Akhtar [not found] ` <CGME20210617113314epcas5p4652e98d24d7f56a7c8461175bbb25456@epcas5p4.samsung.com> 0 siblings, 1 reply; 4+ messages in thread From: Alim Akhtar @ 2021-06-17 11:37 UTC (permalink / raw) To: linux-kernel, linux-arm-kernel, robh+dt Cc: krzysztof.kozlowski, linux-samsung-soc, Alim Akhtar This patch adds cpu caches information to its dt nodes so that the same is available to userspace via sysfs. This SoC has 48/32 KB I/D cache for each cores and 2MB of L2 cache. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> --- arch/arm64/boot/dts/exynos/exynos7.dtsi | 35 +++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 10244e59d56d..8b06397ba6e7 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -54,6 +54,13 @@ compatible = "arm,cortex-a57"; reg = <0x0>; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; }; cpu_atlas1: cpu@1 { @@ -61,6 +68,13 @@ compatible = "arm,cortex-a57"; reg = <0x1>; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; }; cpu_atlas2: cpu@2 { @@ -68,6 +82,13 @@ compatible = "arm,cortex-a57"; reg = <0x2>; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; }; cpu_atlas3: cpu@3 { @@ -75,6 +96,20 @@ compatible = "arm,cortex-a57"; reg = <0x3>; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; + }; + + atlas_l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; }; }; base-commit: 614124bea77e452aa6df7a8714e8bc820b489922 -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 4+ messages in thread
[parent not found: <CGME20210617113314epcas5p4652e98d24d7f56a7c8461175bbb25456@epcas5p4.samsung.com>]
* [PATCH 2/2] arm64: dts: exynos5433: Add cpu cache information [not found] ` <CGME20210617113314epcas5p4652e98d24d7f56a7c8461175bbb25456@epcas5p4.samsung.com> @ 2021-06-17 11:37 ` Alim Akhtar 2021-06-21 8:51 ` Krzysztof Kozlowski 0 siblings, 1 reply; 4+ messages in thread From: Alim Akhtar @ 2021-06-17 11:37 UTC (permalink / raw) To: linux-kernel, linux-arm-kernel, robh+dt Cc: krzysztof.kozlowski, linux-samsung-soc, Alim Akhtar This patch adds cpu caches information to its dt nodes so that the same is available to userspace via sysfs. This SoC has 48/32 KB I/D cache for each A57 cores with 2MB L2 cache. And 32/32 KB I/D cache for each A53 cores with 256KB L2 cache. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 18a912eee360..8183a59e9046 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -62,6 +62,13 @@ clock-names = "apolloclk"; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&apollo_l2>; }; cpu1: cpu@101 { @@ -72,6 +79,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&apollo_l2>; }; cpu2: cpu@102 { @@ -82,6 +96,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&apollo_l2>; }; cpu3: cpu@103 { @@ -92,6 +113,13 @@ clock-frequency = <1300000000>; operating-points-v2 = <&cluster_a53_opp_table>; #cooling-cells = <2>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&apollo_l2>; }; cpu4: cpu@0 { @@ -104,6 +132,13 @@ clock-names = "atlasclk"; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; }; cpu5: cpu@1 { @@ -114,6 +149,13 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; }; cpu6: cpu@2 { @@ -124,6 +166,13 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; }; cpu7: cpu@3 { @@ -134,6 +183,27 @@ clock-frequency = <1900000000>; operating-points-v2 = <&cluster_a57_opp_table>; #cooling-cells = <2>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&atlas_l2>; + }; + + atlas_l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + }; + + apollo_l2: l2-cache1 { + compatible = "cache"; + cache-size = <0x40000>; + cache-line-size = <64>; + cache-sets = <256>; }; }; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] arm64: dts: exynos5433: Add cpu cache information 2021-06-17 11:37 ` [PATCH 2/2] arm64: dts: exynos5433: " Alim Akhtar @ 2021-06-21 8:51 ` Krzysztof Kozlowski 2021-06-21 13:46 ` Alim Akhtar 0 siblings, 1 reply; 4+ messages in thread From: Krzysztof Kozlowski @ 2021-06-21 8:51 UTC (permalink / raw) To: Alim Akhtar, linux-kernel, linux-arm-kernel, robh+dt; +Cc: linux-samsung-soc On 17/06/2021 13:37, Alim Akhtar wrote: > This patch adds cpu caches information to its dt > nodes so that the same is available to userspace > via sysfs. > This SoC has 48/32 KB I/D cache for each A57 cores > with 2MB L2 cache. > And 32/32 KB I/D cache for each A53 cores with > 256KB L2 cache. > > Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 70 ++++++++++++++++++++++ > 1 file changed, 70 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index 18a912eee360..8183a59e9046 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -62,6 +62,13 @@ > clock-names = "apolloclk"; > operating-points-v2 = <&cluster_a53_opp_table>; > #cooling-cells = <2>; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&apollo_l2>; > }; > > cpu1: cpu@101 { > @@ -72,6 +79,13 @@ > clock-frequency = <1300000000>; > operating-points-v2 = <&cluster_a53_opp_table>; > #cooling-cells = <2>; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&apollo_l2>; > }; > > cpu2: cpu@102 { > @@ -82,6 +96,13 @@ > clock-frequency = <1300000000>; > operating-points-v2 = <&cluster_a53_opp_table>; > #cooling-cells = <2>; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&apollo_l2>; > }; > > cpu3: cpu@103 { > @@ -92,6 +113,13 @@ > clock-frequency = <1300000000>; > operating-points-v2 = <&cluster_a53_opp_table>; > #cooling-cells = <2>; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&apollo_l2>; > }; > > cpu4: cpu@0 { > @@ -104,6 +132,13 @@ > clock-names = "atlasclk"; > operating-points-v2 = <&cluster_a57_opp_table>; > #cooling-cells = <2>; > + i-cache-size = <0xc000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <256>; > + next-level-cache = <&atlas_l2>; > }; > > cpu5: cpu@1 { > @@ -114,6 +149,13 @@ > clock-frequency = <1900000000>; > operating-points-v2 = <&cluster_a57_opp_table>; > #cooling-cells = <2>; > + i-cache-size = <0xc000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <256>; > + next-level-cache = <&atlas_l2>; > }; > > cpu6: cpu@2 { > @@ -124,6 +166,13 @@ > clock-frequency = <1900000000>; > operating-points-v2 = <&cluster_a57_opp_table>; > #cooling-cells = <2>; > + i-cache-size = <0xc000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <256>; > + next-level-cache = <&atlas_l2>; > }; > > cpu7: cpu@3 { > @@ -134,6 +183,27 @@ > clock-frequency = <1900000000>; > operating-points-v2 = <&cluster_a57_opp_table>; > #cooling-cells = <2>; > + i-cache-size = <0xc000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <256>; > + next-level-cache = <&atlas_l2>; > + }; > + > + atlas_l2: l2-cache0 { Few other nodes (PMU, OPP tables) use a57/a53 names instead of codenames, so I would prefer to stay with them (so cluster_a57_l2). For Exynos7 it's fine as it uses Atlas already in labels. > + compatible = "cache"; > + cache-size = <0x200000>; > + cache-line-size = <64>; > + cache-sets = <2048>; > + }; > + > + apollo_l2: l2-cache1 { > + compatible = "cache"; > + cache-size = <0x40000>; > + cache-line-size = <64>; > + cache-sets = <256>; > }; > }; > > Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH 2/2] arm64: dts: exynos5433: Add cpu cache information 2021-06-21 8:51 ` Krzysztof Kozlowski @ 2021-06-21 13:46 ` Alim Akhtar 0 siblings, 0 replies; 4+ messages in thread From: Alim Akhtar @ 2021-06-21 13:46 UTC (permalink / raw) To: 'Krzysztof Kozlowski', linux-kernel, linux-arm-kernel, robh+dt Cc: linux-samsung-soc Hello Krzysztof > -----Original Message----- > From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> > Sent: 21 June 2021 14:22 > To: Alim Akhtar <alim.akhtar@samsung.com>; linux-kernel@vger.kernel.org; > linux-arm-kernel@lists.infradead.org; robh+dt@kernel.org > Cc: linux-samsung-soc@vger.kernel.org > Subject: Re: [PATCH 2/2] arm64: dts: exynos5433: Add cpu cache information > > On 17/06/2021 13:37, Alim Akhtar wrote: > > This patch adds cpu caches information to its dt nodes so that the > > same is available to userspace via sysfs. > > This SoC has 48/32 KB I/D cache for each A57 cores with 2MB L2 cache. > > And 32/32 KB I/D cache for each A53 cores with 256KB L2 cache. > > > > Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> > > --- > > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 70 > > ++++++++++++++++++++++ > > 1 file changed, 70 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > > b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > > index 18a912eee360..8183a59e9046 100644 > > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > > @@ -62,6 +62,13 @@ > > clock-names = "apolloclk"; > > operating-points-v2 = <&cluster_a53_opp_table>; > > #cooling-cells = <2>; > > + i-cache-size = <0x8000>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <0x8000>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&apollo_l2>; > > }; > > > > cpu1: cpu@101 { > > @@ -72,6 +79,13 @@ > > clock-frequency = <1300000000>; > > operating-points-v2 = <&cluster_a53_opp_table>; > > #cooling-cells = <2>; > > + i-cache-size = <0x8000>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <0x8000>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&apollo_l2>; > > }; > > > > cpu2: cpu@102 { > > @@ -82,6 +96,13 @@ > > clock-frequency = <1300000000>; > > operating-points-v2 = <&cluster_a53_opp_table>; > > #cooling-cells = <2>; > > + i-cache-size = <0x8000>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <0x8000>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&apollo_l2>; > > }; > > > > cpu3: cpu@103 { > > @@ -92,6 +113,13 @@ > > clock-frequency = <1300000000>; > > operating-points-v2 = <&cluster_a53_opp_table>; > > #cooling-cells = <2>; > > + i-cache-size = <0x8000>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <0x8000>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <128>; > > + next-level-cache = <&apollo_l2>; > > }; > > > > cpu4: cpu@0 { > > @@ -104,6 +132,13 @@ > > clock-names = "atlasclk"; > > operating-points-v2 = <&cluster_a57_opp_table>; > > #cooling-cells = <2>; > > + i-cache-size = <0xc000>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <0x8000>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <256>; > > + next-level-cache = <&atlas_l2>; > > }; > > > > cpu5: cpu@1 { > > @@ -114,6 +149,13 @@ > > clock-frequency = <1900000000>; > > operating-points-v2 = <&cluster_a57_opp_table>; > > #cooling-cells = <2>; > > + i-cache-size = <0xc000>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <0x8000>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <256>; > > + next-level-cache = <&atlas_l2>; > > }; > > > > cpu6: cpu@2 { > > @@ -124,6 +166,13 @@ > > clock-frequency = <1900000000>; > > operating-points-v2 = <&cluster_a57_opp_table>; > > #cooling-cells = <2>; > > + i-cache-size = <0xc000>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <0x8000>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <256>; > > + next-level-cache = <&atlas_l2>; > > }; > > > > cpu7: cpu@3 { > > @@ -134,6 +183,27 @@ > > clock-frequency = <1900000000>; > > operating-points-v2 = <&cluster_a57_opp_table>; > > #cooling-cells = <2>; > > + i-cache-size = <0xc000>; > > + i-cache-line-size = <64>; > > + i-cache-sets = <256>; > > + d-cache-size = <0x8000>; > > + d-cache-line-size = <64>; > > + d-cache-sets = <256>; > > + next-level-cache = <&atlas_l2>; > > + }; > > + > > + atlas_l2: l2-cache0 { > > Few other nodes (PMU, OPP tables) use a57/a53 names instead of > codenames, so I would prefer to stay with them (so cluster_a57_l2). > Thanks for review, will update in next patch set. > For Exynos7 it's fine as it uses Atlas already in labels. > > > + compatible = "cache"; > > + cache-size = <0x200000>; > > + cache-line-size = <64>; > > + cache-sets = <2048>; > > + }; > > + > > + apollo_l2: l2-cache1 { > > + compatible = "cache"; > > + cache-size = <0x40000>; > > + cache-line-size = <64>; > > + cache-sets = <256>; > > }; > > }; > > > > > > > Best regards, > Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-06-21 14:18 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20210617113313epcas5p1fb3fff0b301b9e67a771349e72c2445b@epcas5p1.samsung.com>
2021-06-17 11:37 ` [PATCH 1/2] arm64: dts: exynos7: Add cpu cache information Alim Akhtar
[not found] ` <CGME20210617113314epcas5p4652e98d24d7f56a7c8461175bbb25456@epcas5p4.samsung.com>
2021-06-17 11:37 ` [PATCH 2/2] arm64: dts: exynos5433: " Alim Akhtar
2021-06-21 8:51 ` Krzysztof Kozlowski
2021-06-21 13:46 ` Alim Akhtar
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).