linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: kgene@kernel.org (kgene at kernel.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/5] ARM: EXYNOS: cpuidle: fix AFTR mode on boards with secure firmware enabled
Date: Tue, 09 Sep 2014 12:34:21 +0900	[thread overview]
Message-ID: <034a01cfcbde$f1a98270$d4fc8750$@kernel.org> (raw)
In-Reply-To: <1409925088-4705-1-git-send-email-b.zolnierkie@samsung.com>

Bartlomiej Zolnierkiewicz wrote:
> 
> Hi,
> 
Hi,

> This patch series adds support for AFTR idle mode on boards with
> secure firmware enabled and allows EXYNOS cpuidle driver usage on
> Exynos4x12 SoCs.
> 
> It has been tested on Trats2 board (using Exynos4412 SoC with secure
> firmware enabled) on which AFTR mode reduces power consumption by ~12%

Nice.

> when EXYNOS cpuidle driver is enabled (in both cases the default
> exynos_defconfig config is used and CPU1-3 are offlined).
> 
> Currently Exynos4412 SoC support is limited to Trats2 board.
> 
> Depends on:
> - next-20140904 branch of linux-next kernel tree
> - "irqchip: Properly fetch the per cpu offset" patch
>   (https://www.mail-archive.com/linux-kernel at vger.kernel.org/msg716674.html)
> - [PATCH v3 0/5] Firmware-assisted suspend/resume of Exynos SoCs
>   (https://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35921.html)
> 
OK this series looks good to me, I will take this series once above patches are
landed.

Thanks,
Kukjin

> Changes since v5:
> - rebased on top of next-20140904 +
>   "irqchip: Properly fetch the per cpu offset" patch
>   (https://www.mail-archive.com/linux-kernel at vger.kernel.org/msg716674.html)
>   [PATCH v3 0/5] Firmware-assisted suspend/resume of Exynos SoCs
>   (https://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35921.html)
> - limit Exynos4412 SoC support to Trats2 board for now
> 
> Changes since v4:
> - rebased on top of next-20140804 +
>   [PATCH v5][next-20140804] ARM: EXYNOS: Fix suspend/resume sequences
>   (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35262.html)
>   [PATCH v2 0/2] Firmware-assisted suspend/resume of Exynos SoCs
>   (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg34282.html)
> - call exynos_save_cp15() only on A9 type core (this is needed for the future
>   Exynos3250 SoC support)
> 
> Changes since v3:
> - rebased on top of next-20140804 +
>   [PATCH v4][next-20140804] ARM: EXYNOS: Fix suspend/resume sequences
>   (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35192.html)
>   [PATCH v2 0/2] Firmware-assisted suspend/resume of Exynos SoCs
>   (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg34282.html)
> - (re-)added patch fixing S5P_CENTRAL_SEQ_OPTION register setup
> 
> Changes since v2:
> - rebased on top of next-20140708 +
>   [PATCH 5/6] ARM: EXYNOS: Fix suspend/resume sequencies
>   (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg32809.html)
>   [with rejects fixed]
>   [PATCH 6/6] ARM: EXYNOS: Register cpuidle device only on Exynos4210 and 5250
>   (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg32808.html)
>   [PATCH 0/2] Firmware-assisted suspend/resume of Exynos SoCs
>   (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg32991.html)
>   [with rejects fixed in patch #2]
> - addressed review comments from Tomasz Figa and Daniel Lezcano
> 
> Changes since v1:
> - synced against next-20140602
> - added missing Acked-by-s
> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
> 
> Bartlomiej Zolnierkiewicz (5):
>   ARM: EXYNOS: PM: replace EXYNOS_BOOT_VECTOR_* macros by static inlines
>   ARM: EXYNOS: add AFTR mode support to firmware do_idle method
>   ARM: EXYNOS: cpuidle: add secure firmware support to AFTR mode code
>   ARM: EXYNOS: PM: fix register setup for AFTR mode code
>   ARM: EXYNOS: cpuidle: allow driver usage on Exynos4x12 SoCs
> 
>  arch/arm/include/asm/firmware.h |  2 +-
>  arch/arm/mach-exynos/common.h   |  5 ++++
>  arch/arm/mach-exynos/exynos.c   |  5 +++-
>  arch/arm/mach-exynos/firmware.c | 34 ++++++++++++++++-------
>  arch/arm/mach-exynos/pm.c       | 60 ++++++++++++++++++++++++-----------------
>  5 files changed, 71 insertions(+), 35 deletions(-)
> 
> --
> 1.8.2.3

      parent reply	other threads:[~2014-09-09  3:34 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-05 13:51 [PATCH v6 0/5] ARM: EXYNOS: cpuidle: fix AFTR mode on boards with secure firmware enabled Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 1/5] ARM: EXYNOS: PM: replace EXYNOS_BOOT_VECTOR_* macros by static inlines Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 2/5] ARM: EXYNOS: add AFTR mode support to firmware do_idle method Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 3/5] ARM: EXYNOS: cpuidle: add secure firmware support to AFTR mode code Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 4/5] ARM: EXYNOS: PM: fix register setup for " Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 5/5] ARM: EXYNOS: cpuidle: allow driver usage on Exynos4x12 SoCs Bartlomiej Zolnierkiewicz
2014-09-09  3:34 ` kgene at kernel.org [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='034a01cfcbde$f1a98270$d4fc8750$@kernel.org' \
    --to=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).