linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: b.zolnierkie@samsung.com (Bartlomiej Zolnierkiewicz)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/5] ARM: EXYNOS: cpuidle: fix AFTR mode on boards with secure firmware enabled
Date: Fri, 05 Sep 2014 15:51:23 +0200	[thread overview]
Message-ID: <1409925088-4705-1-git-send-email-b.zolnierkie@samsung.com> (raw)

Hi,

This patch series adds support for AFTR idle mode on boards with
secure firmware enabled and allows EXYNOS cpuidle driver usage on
Exynos4x12 SoCs.

It has been tested on Trats2 board (using Exynos4412 SoC with secure
firmware enabled) on which AFTR mode reduces power consumption by ~12%
when EXYNOS cpuidle driver is enabled (in both cases the default
exynos_defconfig config is used and CPU1-3 are offlined).

Currently Exynos4412 SoC support is limited to Trats2 board.

Depends on:
- next-20140904 branch of linux-next kernel tree
- "irqchip: Properly fetch the per cpu offset" patch
  (https://www.mail-archive.com/linux-kernel at vger.kernel.org/msg716674.html)
- [PATCH v3 0/5] Firmware-assisted suspend/resume of Exynos SoCs
  (https://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35921.html)

Changes since v5:
- rebased on top of next-20140904 +
  "irqchip: Properly fetch the per cpu offset" patch
  (https://www.mail-archive.com/linux-kernel at vger.kernel.org/msg716674.html)
  [PATCH v3 0/5] Firmware-assisted suspend/resume of Exynos SoCs
  (https://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35921.html)
- limit Exynos4412 SoC support to Trats2 board for now

Changes since v4:
- rebased on top of next-20140804 +
  [PATCH v5][next-20140804] ARM: EXYNOS: Fix suspend/resume sequences
  (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35262.html)
  [PATCH v2 0/2] Firmware-assisted suspend/resume of Exynos SoCs
  (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg34282.html)
- call exynos_save_cp15() only on A9 type core (this is needed for the future
  Exynos3250 SoC support)

Changes since v3:
- rebased on top of next-20140804 +
  [PATCH v4][next-20140804] ARM: EXYNOS: Fix suspend/resume sequences
  (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35192.html)
  [PATCH v2 0/2] Firmware-assisted suspend/resume of Exynos SoCs
  (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg34282.html)
- (re-)added patch fixing S5P_CENTRAL_SEQ_OPTION register setup

Changes since v2:
- rebased on top of next-20140708 +
  [PATCH 5/6] ARM: EXYNOS: Fix suspend/resume sequencies
  (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg32809.html)
  [with rejects fixed]
  [PATCH 6/6] ARM: EXYNOS: Register cpuidle device only on Exynos4210 and 5250
  (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg32808.html)
  [PATCH 0/2] Firmware-assisted suspend/resume of Exynos SoCs
  (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg32991.html)
  [with rejects fixed in patch #2]
- addressed review comments from Tomasz Figa and Daniel Lezcano

Changes since v1:
- synced against next-20140602
- added missing Acked-by-s

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


Bartlomiej Zolnierkiewicz (5):
  ARM: EXYNOS: PM: replace EXYNOS_BOOT_VECTOR_* macros by static inlines
  ARM: EXYNOS: add AFTR mode support to firmware do_idle method
  ARM: EXYNOS: cpuidle: add secure firmware support to AFTR mode code
  ARM: EXYNOS: PM: fix register setup for AFTR mode code
  ARM: EXYNOS: cpuidle: allow driver usage on Exynos4x12 SoCs

 arch/arm/include/asm/firmware.h |  2 +-
 arch/arm/mach-exynos/common.h   |  5 ++++
 arch/arm/mach-exynos/exynos.c   |  5 +++-
 arch/arm/mach-exynos/firmware.c | 34 ++++++++++++++++-------
 arch/arm/mach-exynos/pm.c       | 60 ++++++++++++++++++++++++-----------------
 5 files changed, 71 insertions(+), 35 deletions(-)

-- 
1.8.2.3

             reply	other threads:[~2014-09-05 13:51 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-05 13:51 Bartlomiej Zolnierkiewicz [this message]
2014-09-05 13:51 ` [PATCH v6 1/5] ARM: EXYNOS: PM: replace EXYNOS_BOOT_VECTOR_* macros by static inlines Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 2/5] ARM: EXYNOS: add AFTR mode support to firmware do_idle method Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 3/5] ARM: EXYNOS: cpuidle: add secure firmware support to AFTR mode code Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 4/5] ARM: EXYNOS: PM: fix register setup for " Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 5/5] ARM: EXYNOS: cpuidle: allow driver usage on Exynos4x12 SoCs Bartlomiej Zolnierkiewicz
2014-09-09  3:34 ` [PATCH v6 0/5] ARM: EXYNOS: cpuidle: fix AFTR mode on boards with secure firmware enabled kgene at kernel.org

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1409925088-4705-1-git-send-email-b.zolnierkie@samsung.com \
    --to=b.zolnierkie@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).