* [PATCH] ARM: dts: porter: Add missing PMIC nodes
@ 2018-02-17 2:07 Marek Vasut
2018-02-18 15:07 ` Geert Uytterhoeven
0 siblings, 1 reply; 11+ messages in thread
From: Marek Vasut @ 2018-02-17 2:07 UTC (permalink / raw)
To: linux-arm-kernel
Add PMIC nodes to Porter and connect CPU DVFS supply. There is
one DA9063 and one DA9210 on Porter, the only difference from
the other boards is that DA9063 is at I2C address 0x5a rather
than 0x58 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7791-porter.dts | 37 ++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index a098d66292fb..116f30f54e04 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -354,10 +354,47 @@
clock-frequency = <400000>;
};
+&i2c6 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic at 5a {
+ compatible = "dlg,da9063";
+ reg = <0x5a>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+
+ vdd_dvfs: regulator at 68 {
+ compatible = "dlg,da9210";
+ reg = <0x68>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
&sata0 {
status = "okay";
};
+&cpu0 {
+ cpu0-supply = <&vdd_dvfs>;
+};
+
/* composite video input */
&vin0 {
status = "okay";
--
2.15.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: porter: Add missing PMIC nodes
2018-02-17 2:07 [PATCH] ARM: dts: porter: Add missing PMIC nodes Marek Vasut
@ 2018-02-18 15:07 ` Geert Uytterhoeven
2018-02-23 16:45 ` Simon Horman
2018-02-24 22:11 ` Marek Vasut
0 siblings, 2 replies; 11+ messages in thread
From: Geert Uytterhoeven @ 2018-02-18 15:07 UTC (permalink / raw)
To: linux-arm-kernel
Hi Marek,
CC Steve Twiss
On Sat, Feb 17, 2018 at 3:07 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> Add PMIC nodes to Porter and connect CPU DVFS supply. There is
> one DA9063 and one DA9210 on Porter, the only difference from
> the other boards is that DA9063 is at I2C address 0x5a rather
> than 0x58 .
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Thanks for your patch!
> --- a/arch/arm/boot/dts/r8a7791-porter.dts
> +++ b/arch/arm/boot/dts/r8a7791-porter.dts
> @@ -354,10 +354,47 @@
> clock-frequency = <400000>;
> };
>
> +&i2c6 {
> + status = "okay";
> + clock-frequency = <100000>;
> +
> + pmic at 5a {
> + compatible = "dlg,da9063";
Does it matter that this is a DA9063L ("Variant 6B")?
Do we need a new compatible value, or can this be detected at runtime?
> + reg = <0x5a>;
> + interrupt-parent = <&irqc0>;
> + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-controller;
> +
> + rtc {
> + compatible = "dlg,da9063-rtc";
> + };
> +
> + wdt {
> + compatible = "dlg,da9063-watchdog";
> + };
> + };
> +
> + vdd_dvfs: regulator at 68 {
> + compatible = "dlg,da9210";
> + reg = <0x68>;
> + interrupt-parent = <&irqc0>;
> + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +};
> +
> &sata0 {
> status = "okay";
> };
>
> +&cpu0 {
> + cpu0-supply = <&vdd_dvfs>;
> +};
> +
> /* composite video input */
> &vin0 {
> status = "okay";
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: porter: Add missing PMIC nodes
2018-02-18 15:07 ` Geert Uytterhoeven
@ 2018-02-23 16:45 ` Simon Horman
2018-02-24 10:05 ` Marek Vasut
2018-02-24 22:11 ` Marek Vasut
1 sibling, 1 reply; 11+ messages in thread
From: Simon Horman @ 2018-02-23 16:45 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Feb 18, 2018 at 04:07:51PM +0100, Geert Uytterhoeven wrote:
> Hi Marek,
>
> CC Steve Twiss
>
> On Sat, Feb 17, 2018 at 3:07 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> > Add PMIC nodes to Porter and connect CPU DVFS supply. There is
> > one DA9063 and one DA9210 on Porter, the only difference from
> > the other boards is that DA9063 is at I2C address 0x5a rather
> > than 0x58 .
> >
> > Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>
> Thanks for your patch!
>
> > --- a/arch/arm/boot/dts/r8a7791-porter.dts
> > +++ b/arch/arm/boot/dts/r8a7791-porter.dts
> > @@ -354,10 +354,47 @@
> > clock-frequency = <400000>;
> > };
> >
> > +&i2c6 {
> > + status = "okay";
> > + clock-frequency = <100000>;
> > +
> > + pmic at 5a {
> > + compatible = "dlg,da9063";
>
> Does it matter that this is a DA9063L ("Variant 6B")?
> Do we need a new compatible value, or can this be detected at runtime?
Hi Marek,
could you follow up on this?
> > + reg = <0x5a>;
> > + interrupt-parent = <&irqc0>;
> > + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> > + interrupt-controller;
> > +
> > + rtc {
> > + compatible = "dlg,da9063-rtc";
> > + };
> > +
> > + wdt {
> > + compatible = "dlg,da9063-watchdog";
> > + };
> > + };
> > +
> > + vdd_dvfs: regulator at 68 {
> > + compatible = "dlg,da9210";
> > + reg = <0x68>;
> > + interrupt-parent = <&irqc0>;
> > + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> > +
> > + regulator-min-microvolt = <1000000>;
> > + regulator-max-microvolt = <1000000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +};
> > +
> > &sata0 {
> > status = "okay";
> > };
> >
> > +&cpu0 {
> > + cpu0-supply = <&vdd_dvfs>;
> > +};
> > +
> > /* composite video input */
> > &vin0 {
> > status = "okay";
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: porter: Add missing PMIC nodes
2018-02-23 16:45 ` Simon Horman
@ 2018-02-24 10:05 ` Marek Vasut
0 siblings, 0 replies; 11+ messages in thread
From: Marek Vasut @ 2018-02-24 10:05 UTC (permalink / raw)
To: linux-arm-kernel
On 02/23/2018 05:45 PM, Simon Horman wrote:
> On Sun, Feb 18, 2018 at 04:07:51PM +0100, Geert Uytterhoeven wrote:
>> Hi Marek,
>>
>> CC Steve Twiss
>>
>> On Sat, Feb 17, 2018 at 3:07 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
>>> Add PMIC nodes to Porter and connect CPU DVFS supply. There is
>>> one DA9063 and one DA9210 on Porter, the only difference from
>>> the other boards is that DA9063 is at I2C address 0x5a rather
>>> than 0x58 .
>>>
>>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>>
>> Thanks for your patch!
>>
>>> --- a/arch/arm/boot/dts/r8a7791-porter.dts
>>> +++ b/arch/arm/boot/dts/r8a7791-porter.dts
>>> @@ -354,10 +354,47 @@
>>> clock-frequency = <400000>;
>>> };
>>>
>>> +&i2c6 {
>>> + status = "okay";
>>> + clock-frequency = <100000>;
>>> +
>>> + pmic at 5a {
>>> + compatible = "dlg,da9063";
>>
>> Does it matter that this is a DA9063L ("Variant 6B")?
>> Do we need a new compatible value, or can this be detected at runtime?
>
> Hi Marek,
>
> could you follow up on this?
Yes, ASAP, once I'm back in the office, currently I'm stuck at the airport.
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: porter: Add missing PMIC nodes
2018-02-18 15:07 ` Geert Uytterhoeven
2018-02-23 16:45 ` Simon Horman
@ 2018-02-24 22:11 ` Marek Vasut
2018-02-26 10:55 ` Simon Horman
1 sibling, 1 reply; 11+ messages in thread
From: Marek Vasut @ 2018-02-24 22:11 UTC (permalink / raw)
To: linux-arm-kernel
On 02/18/2018 04:07 PM, Geert Uytterhoeven wrote:
> Hi Marek,
Hi,
> CC Steve Twiss
>
> On Sat, Feb 17, 2018 at 3:07 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
>> Add PMIC nodes to Porter and connect CPU DVFS supply. There is
>> one DA9063 and one DA9210 on Porter, the only difference from
>> the other boards is that DA9063 is at I2C address 0x5a rather
>> than 0x58 .
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>
> Thanks for your patch!
>
>> --- a/arch/arm/boot/dts/r8a7791-porter.dts
>> +++ b/arch/arm/boot/dts/r8a7791-porter.dts
>> @@ -354,10 +354,47 @@
>> clock-frequency = <400000>;
>> };
>>
>> +&i2c6 {
>> + status = "okay";
>> + clock-frequency = <100000>;
>> +
>> + pmic at 5a {
>> + compatible = "dlg,da9063";
>
> Does it matter that this is a DA9063L ("Variant 6B")?
> Do we need a new compatible value, or can this be detected at runtime?
The driver detects it
da9063 6-005a: Device detected (chip-ID: 0x61, var-ID: 0x63)
Comparing the datasheets makes it obvious that 9063L is just a cut-down
version of 9063, with less LDOs and one less ADC. So I think we should
have extra compatible and have the driver restrict which LDOs can be
used with this smaller PMIC.
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: porter: Add missing PMIC nodes
2018-02-24 22:11 ` Marek Vasut
@ 2018-02-26 10:55 ` Simon Horman
2018-02-26 11:15 ` Marek Vasut
0 siblings, 1 reply; 11+ messages in thread
From: Simon Horman @ 2018-02-26 10:55 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Feb 24, 2018 at 11:11:31PM +0100, Marek Vasut wrote:
> On 02/18/2018 04:07 PM, Geert Uytterhoeven wrote:
> > Hi Marek,
>
> Hi,
>
> > CC Steve Twiss
> >
> > On Sat, Feb 17, 2018 at 3:07 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> >> Add PMIC nodes to Porter and connect CPU DVFS supply. There is
> >> one DA9063 and one DA9210 on Porter, the only difference from
> >> the other boards is that DA9063 is at I2C address 0x5a rather
> >> than 0x58 .
> >>
> >> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> >
> > Thanks for your patch!
> >
> >> --- a/arch/arm/boot/dts/r8a7791-porter.dts
> >> +++ b/arch/arm/boot/dts/r8a7791-porter.dts
> >> @@ -354,10 +354,47 @@
> >> clock-frequency = <400000>;
> >> };
> >>
> >> +&i2c6 {
> >> + status = "okay";
> >> + clock-frequency = <100000>;
> >> +
> >> + pmic at 5a {
> >> + compatible = "dlg,da9063";
> >
> > Does it matter that this is a DA9063L ("Variant 6B")?
> > Do we need a new compatible value, or can this be detected at runtime?
>
> The driver detects it
>
> da9063 6-005a: Device detected (chip-ID: 0x61, var-ID: 0x63)
>
> Comparing the datasheets makes it obvious that 9063L is just a cut-down
> version of 9063, with less LDOs and one less ADC. So I think we should
> have extra compatible and have the driver restrict which LDOs can be
> used with this smaller PMIC.
Thanks, and sorry to ping yo about this while you were in transit.
It sounds like this patch should be updated.
Accordingly I'm marking it as "Changes Requested".
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: porter: Add missing PMIC nodes
2018-02-26 10:55 ` Simon Horman
@ 2018-02-26 11:15 ` Marek Vasut
0 siblings, 0 replies; 11+ messages in thread
From: Marek Vasut @ 2018-02-26 11:15 UTC (permalink / raw)
To: linux-arm-kernel
On 02/26/2018 11:55 AM, Simon Horman wrote:
> On Sat, Feb 24, 2018 at 11:11:31PM +0100, Marek Vasut wrote:
>> On 02/18/2018 04:07 PM, Geert Uytterhoeven wrote:
>>> Hi Marek,
>>
>> Hi,
>>
>>> CC Steve Twiss
>>>
>>> On Sat, Feb 17, 2018 at 3:07 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
>>>> Add PMIC nodes to Porter and connect CPU DVFS supply. There is
>>>> one DA9063 and one DA9210 on Porter, the only difference from
>>>> the other boards is that DA9063 is at I2C address 0x5a rather
>>>> than 0x58 .
>>>>
>>>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>>>
>>> Thanks for your patch!
>>>
>>>> --- a/arch/arm/boot/dts/r8a7791-porter.dts
>>>> +++ b/arch/arm/boot/dts/r8a7791-porter.dts
>>>> @@ -354,10 +354,47 @@
>>>> clock-frequency = <400000>;
>>>> };
>>>>
>>>> +&i2c6 {
>>>> + status = "okay";
>>>> + clock-frequency = <100000>;
>>>> +
>>>> + pmic at 5a {
>>>> + compatible = "dlg,da9063";
>>>
>>> Does it matter that this is a DA9063L ("Variant 6B")?
>>> Do we need a new compatible value, or can this be detected at runtime?
>>
>> The driver detects it
>>
>> da9063 6-005a: Device detected (chip-ID: 0x61, var-ID: 0x63)
>>
>> Comparing the datasheets makes it obvious that 9063L is just a cut-down
>> version of 9063, with less LDOs and one less ADC. So I think we should
>> have extra compatible and have the driver restrict which LDOs can be
>> used with this smaller PMIC.
>
> Thanks, and sorry to ping yo about this while you were in transit.
>
> It sounds like this patch should be updated.
> Accordingly I'm marking it as "Changes Requested".
Correct
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: porter: Add missing PMIC nodes
2018-05-23 11:52 ` Geert Uytterhoeven
2018-05-23 11:54 ` Marek Vasut
@ 2018-05-25 10:09 ` Simon Horman
1 sibling, 0 replies; 11+ messages in thread
From: Simon Horman @ 2018-05-25 10:09 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, May 23, 2018 at 01:52:32PM +0200, Geert Uytterhoeven wrote:
> Hi Marek,
>
> On Wed, May 23, 2018 at 1:43 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> > Add PMIC nodes to Porter and connect CPU DVFS supply. There is
> > one DA9063L and one DA9210 on Porter, the only difference from
> > the other boards is that DA9063L is at I2C address 0x5a rather
> > than 0x58 .
>
> Ah, so porter needs the regulator quirk, too.
>
> > Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Thanks, applied.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: porter: Add missing PMIC nodes
2018-05-23 11:52 ` Geert Uytterhoeven
@ 2018-05-23 11:54 ` Marek Vasut
2018-05-25 10:09 ` Simon Horman
1 sibling, 0 replies; 11+ messages in thread
From: Marek Vasut @ 2018-05-23 11:54 UTC (permalink / raw)
To: linux-arm-kernel
On 05/23/2018 01:52 PM, Geert Uytterhoeven wrote:
> Hi Marek,
Hi,
> On Wed, May 23, 2018 at 1:43 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
>> Add PMIC nodes to Porter and connect CPU DVFS supply. There is
>> one DA9063L and one DA9210 on Porter, the only difference from
>> the other boards is that DA9063L is at I2C address 0x5a rather
>> than 0x58 .
>
> Ah, so porter needs the regulator quirk, too.
Most of the boards do in fact, they just miss the regulator nodes.
Silk to from what I can test locally.
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> Gr{oetje,eeting}s,
>
> Geert
>
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: porter: Add missing PMIC nodes
2018-05-23 11:43 Marek Vasut
@ 2018-05-23 11:52 ` Geert Uytterhoeven
2018-05-23 11:54 ` Marek Vasut
2018-05-25 10:09 ` Simon Horman
0 siblings, 2 replies; 11+ messages in thread
From: Geert Uytterhoeven @ 2018-05-23 11:52 UTC (permalink / raw)
To: linux-arm-kernel
Hi Marek,
On Wed, May 23, 2018 at 1:43 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
> Add PMIC nodes to Porter and connect CPU DVFS supply. There is
> one DA9063L and one DA9210 on Porter, the only difference from
> the other boards is that DA9063L is at I2C address 0x5a rather
> than 0x58 .
Ah, so porter needs the regulator quirk, too.
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] ARM: dts: porter: Add missing PMIC nodes
@ 2018-05-23 11:43 Marek Vasut
2018-05-23 11:52 ` Geert Uytterhoeven
0 siblings, 1 reply; 11+ messages in thread
From: Marek Vasut @ 2018-05-23 11:43 UTC (permalink / raw)
To: linux-arm-kernel
Add PMIC nodes to Porter and connect CPU DVFS supply. There is
one DA9063L and one DA9210 on Porter, the only difference from
the other boards is that DA9063L is at I2C address 0x5a rather
than 0x58 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: linux-renesas-soc at vger.kernel.org
---
arch/arm/boot/dts/r8a7791-porter.dts | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index a01101b49d99..5f77d73d7462 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -375,10 +375,43 @@
clock-frequency = <400000>;
};
+&i2c6 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic at 5a {
+ compatible = "dlg,da9063l";
+ reg = <0x5a>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+
+ vdd_dvfs: regulator at 68 {
+ compatible = "dlg,da9210";
+ reg = <0x68>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
&sata0 {
status = "okay";
};
+&cpu0 {
+ cpu0-supply = <&vdd_dvfs>;
+};
+
/* composite video input */
&vin0 {
status = "okay";
--
2.16.2
^ permalink raw reply related [flat|nested] 11+ messages in thread
end of thread, other threads:[~2018-05-25 10:09 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-02-17 2:07 [PATCH] ARM: dts: porter: Add missing PMIC nodes Marek Vasut
2018-02-18 15:07 ` Geert Uytterhoeven
2018-02-23 16:45 ` Simon Horman
2018-02-24 10:05 ` Marek Vasut
2018-02-24 22:11 ` Marek Vasut
2018-02-26 10:55 ` Simon Horman
2018-02-26 11:15 ` Marek Vasut
2018-05-23 11:43 Marek Vasut
2018-05-23 11:52 ` Geert Uytterhoeven
2018-05-23 11:54 ` Marek Vasut
2018-05-25 10:09 ` Simon Horman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).