From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] net/smsc911x: add device tree probe support
Date: Mon, 25 Jul 2011 17:44:00 +0800 [thread overview]
Message-ID: <1311587040-8988-1-git-send-email-shawn.guo@linaro.org> (raw)
It adds device tree probe support for smsc911x driver.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: David S. Miller <davem@davemloft.net>
---
Documentation/devicetree/bindings/net/smsc.txt | 34 +++++++
drivers/net/smsc911x.c | 123 +++++++++++++++++++-----
2 files changed, 132 insertions(+), 25 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/smsc.txt
diff --git a/Documentation/devicetree/bindings/net/smsc.txt b/Documentation/devicetree/bindings/net/smsc.txt
new file mode 100644
index 0000000..1920695
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc.txt
@@ -0,0 +1,34 @@
+* Smart Mixed-Signal Connectivity (SMSC) LAN Controller
+
+Required properties:
+- compatible : Should be "smsc,lan<model>""smsc,lan"
+- reg : Address and length of the io space for SMSC LAN
+- smsc-int-gpios : Should specify the GPIO for SMSC LAN interrupt line
+- phy-mode : String, operation mode of the PHY interface.
+ Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii",
+ "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii".
+
+Optional properties:
+- smsc,irq-active-high : Indicates the IRQ polarity is active-low
+- smsc,irq-push-pull : Indicates the IRQ type is push-pull
+- smsc,register-needs-shift : Indicates the register access needs shift
+- smsc,access-in-32bit : Indicates the access to controller is in 32-bit
+ mode
+- smsc,force-internal-phy : Forces SMSC LAN controller to use
+ internal PHY
+- smsc,force-external-phy : Forces SMSC LAN controller to use
+ external PHY
+- smsc,save-mac-address : Indicates that mac address needs to be saved
+ before resetting the controller
+- local-mac-address : 6 bytes, mac address
+
+Examples:
+
+lan9220 at f4000000 {
+ compatible = "smsc,lan9220", "smsc,lan";
+ reg = <0xf4000000 0x2000000>;
+ phy-mode = "mii";
+ smsc-int-gpios = <&gpio1 31 0>; /* GPIO2_31 */
+ smsc,irq-push-pull;
+ smsc,access-in-32bit;
+};
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b9016a3..0097048 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -53,6 +53,10 @@
#include <linux/phy.h>
#include <linux/smsc911x.h>
#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_net.h>
#include "smsc911x.h"
#define SMSC_CHIPNAME "smsc911x"
@@ -2095,25 +2099,67 @@ static const struct smsc911x_ops shifted_smsc911x_ops = {
.tx_writefifo = smsc911x_tx_writefifo_shift,
};
+#ifdef CONFIG_OF
+static int __devinit smsc911x_probe_config_dt(
+ struct smsc911x_platform_config *config,
+ struct device_node *np)
+{
+ const char *mac;
+
+ if (!np)
+ return -ENODEV;
+
+ config->phy_interface = of_get_phy_mode(np);
+
+ mac = of_get_mac_address(np);
+ if (mac)
+ memcpy(config->mac, mac, ETH_ALEN);
+
+ if (of_get_property(np, "smsc,irq-active-high", NULL))
+ config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
+
+ if (of_get_property(np, "smsc,irq-push-pull", NULL))
+ config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
+
+ if (of_get_property(np, "smsc,register-needs-shift", NULL))
+ config->shift = 1;
+
+ if (of_get_property(np, "smsc,access-in-32bit", NULL))
+ config->flags |= SMSC911X_USE_32BIT;
+
+ if (of_get_property(np, "smsc,force-internal-phy", NULL))
+ config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
+
+ if (of_get_property(np, "smsc,force-external-phy", NULL))
+ config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
+
+ if (of_get_property(np, "smsc,save-mac-address", NULL))
+ config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
+
+ return 0;
+}
+#else
+static inline int smsc911x_probe_config_dt(
+ struct smsc911x_platform_config *config,
+ struct device_node *np)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_OF */
+
static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct net_device *dev;
struct smsc911x_data *pdata;
struct smsc911x_platform_config *config = pdev->dev.platform_data;
struct resource *res, *irq_res;
unsigned int intcfg = 0;
- int res_size, irq_flags;
- int retval;
+ int irq_gpio, res_size, irq_flags = 0;
+ int retval = 0;
pr_info("Driver version %s\n", SMSC_DRV_VERSION);
- /* platform data specifies irq & dynamic bus configuration */
- if (!pdev->dev.platform_data) {
- pr_warn("platform_data not provided\n");
- retval = -ENODEV;
- goto out_0;
- }
-
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"smsc911x-memory");
if (!res)
@@ -2125,13 +2171,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
}
res_size = resource_size(res);
- irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq_res) {
- pr_warn("Could not allocate irq resource\n");
- retval = -ENODEV;
- goto out_0;
- }
-
if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) {
retval = -EBUSY;
goto out_0;
@@ -2148,26 +2187,53 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
pdata = netdev_priv(dev);
- dev->irq = irq_res->start;
- irq_flags = irq_res->flags & IRQF_TRIGGER_MASK;
- pdata->ioaddr = ioremap_nocache(res->start, res_size);
-
- /* copy config parameters across to pdata */
- memcpy(&pdata->config, config, sizeof(pdata->config));
+ if (np) {
+ irq_gpio = of_get_named_gpio(np, "smsc-int-gpios", 0);
+ retval = gpio_request_one(irq_gpio, GPIOF_IN, "smsc-int-gpio");
+ if (!retval)
+ dev->irq = gpio_to_irq(irq_gpio);
+ } else {
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irq_res) {
+ dev->irq = irq_res->start;
+ irq_flags = irq_res->flags & IRQF_TRIGGER_MASK;
+ } else {
+ retval = -ENODEV;
+ }
+ }
- pdata->dev = dev;
- pdata->msg_enable = ((1 << debug) - 1);
+ if (retval) {
+ SMSC_WARN(pdata, probe, "Error smsc911x irq not found");
+ retval = -EINVAL;
+ goto out_free_netdev_2;
+ }
+ pdata->ioaddr = ioremap_nocache(res->start, res_size);
if (pdata->ioaddr == NULL) {
SMSC_WARN(pdata, probe, "Error smsc911x base address invalid");
retval = -ENOMEM;
goto out_free_netdev_2;
}
+ pdata->dev = dev;
+ pdata->msg_enable = ((1 << debug) - 1);
+
+ retval = smsc911x_probe_config_dt(&pdata->config, np);
+ if (retval && config) {
+ /* copy config parameters across to pdata */
+ memcpy(&pdata->config, config, sizeof(pdata->config));
+ retval = 0;
+ }
+
+ if (retval) {
+ SMSC_WARN(pdata, probe, "Error smsc911x config not found");
+ goto out_unmap_io_3;
+ }
+
/* assume standard, non-shifted, access to HW registers */
pdata->ops = &standard_smsc911x_ops;
/* apply the right access if shifting is needed */
- if (config->shift)
+ if (pdata->config.shift)
pdata->ops = &shifted_smsc911x_ops;
retval = smsc911x_init(dev);
@@ -2314,6 +2380,12 @@ static const struct dev_pm_ops smsc911x_pm_ops = {
#define SMSC911X_PM_OPS NULL
#endif
+static const struct of_device_id smsc_dt_ids[] = {
+ { .compatible = "smsc,lan", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, smsc_dt_ids);
+
static struct platform_driver smsc911x_driver = {
.probe = smsc911x_drv_probe,
.remove = __devexit_p(smsc911x_drv_remove),
@@ -2321,6 +2393,7 @@ static struct platform_driver smsc911x_driver = {
.name = SMSC_CHIPNAME,
.owner = THIS_MODULE,
.pm = SMSC911X_PM_OPS,
+ .of_match_table = smsc_dt_ids,
},
};
--
1.7.4.1
next reply other threads:[~2011-07-25 9:44 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-25 9:44 Shawn Guo [this message]
2011-07-25 21:37 ` [PATCH] net/smsc911x: add device tree probe support Grant Likely
2011-07-26 1:01 ` Shawn Guo
2011-07-26 1:16 ` Nicolas Pitre
2011-07-26 1:30 ` Shawn Guo
2011-07-26 2:28 ` Nicolas Pitre
2011-07-29 2:36 ` Shawn Guo
2011-07-29 15:47 ` Grant Likely
2011-07-29 16:03 ` Shawn Guo
2011-07-29 16:26 ` Grant Likely
2011-07-29 17:13 ` Shawn Guo
2011-07-31 0:42 ` Grant Likely
2011-07-29 15:45 ` Grant Likely
2011-07-29 8:43 ` [PATCH v2] " Shawn Guo
2011-07-29 15:53 ` Grant Likely
2011-07-29 16:16 ` Shawn Guo
2011-07-30 18:26 ` [PATCH v3] " Shawn Guo
2011-08-02 1:01 ` David Miller
2011-09-08 14:59 ` Dave Martin
2011-09-08 18:29 ` Grant Likely
2011-09-09 8:50 ` Dave Martin
2011-09-09 12:59 ` Shawn Guo
2011-09-09 11:48 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311587040-8988-1-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).