From: Li.Xiubo@freescale.com (Xiubo Li)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 2/8] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.
Date: Fri, 1 Nov 2013 15:04:49 +0800 [thread overview]
Message-ID: <1383289495-24523-3-git-send-email-Li.Xiubo@freescale.com> (raw)
In-Reply-To: <1383289495-24523-1-git-send-email-Li.Xiubo@freescale.com>
This patch add the SAI's edma mux Tx and Rx support.
Signed-off-by: Jingchang Lu <b35083@freescale.com>
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
---
arch/arm/boot/dts/vf610.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 18e3a4c..391f180 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -151,9 +151,11 @@
sai2: sai at 40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
- interrupts = <0 86 0x04>;
clocks = <&clks VF610_CLK_SAI2>;
clock-names = "sai";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
+ <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
status = "disabled";
};
--
1.8.4
next prev parent reply other threads:[~2013-11-01 7:04 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-01 7:04 No subject Xiubo Li
2013-11-01 7:04 ` [PATCHv2 1/8] ALSA: Add SAI SoC Digital Audio Interface driver Xiubo Li
2013-11-01 8:59 ` Nicolin Chen
2013-11-04 3:45 ` Li Xiubo
2013-11-04 4:33 ` Nicolin Chen
2013-11-20 3:37 ` Li Xiubo
2013-11-20 3:37 ` Nicolin Chen
2013-11-20 4:16 ` Li Xiubo
2013-11-05 13:26 ` Timur Tabi
2013-11-06 3:27 ` Li Xiubo
2013-11-06 3:31 ` Timur Tabi
2013-11-06 3:53 ` Li Xiubo
2013-11-06 8:12 ` Shawn Guo
2013-11-06 9:38 ` Li Xiubo
2013-11-01 18:25 ` Mark Brown
2013-11-04 7:35 ` Li Xiubo
2013-11-04 16:15 ` Mark Brown
2013-11-05 3:21 ` Li Xiubo
2013-11-06 9:53 ` Mark Brown
2013-11-01 7:04 ` Xiubo Li [this message]
2013-11-01 7:04 ` [PATCHv2 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board Xiubo Li
2013-11-18 18:07 ` Bill Pringlemeir
2013-11-20 3:14 ` Li Xiubo
2013-11-20 16:04 ` Bill Pringlemeir
2013-11-21 2:58 ` Li Xiubo
2013-11-21 14:55 ` Bill Pringlemeir
2013-11-22 6:46 ` Li Xiubo
2013-11-22 15:09 ` Bill Pringlemeir
2013-11-28 7:45 ` Li Xiubo
2013-11-01 7:04 ` [PATCHv2 4/8] Documentation: Add device tree bindings for Freescale SAI Xiubo Li
2013-11-01 7:04 ` [PATCHv2 5/8] ASoC: SGTL5000: Enhance the SGTL5000 codec driver about regulator Xiubo Li
2013-11-01 10:02 ` Nicolin Chen
2013-11-01 18:50 ` Mark Brown
2013-11-06 8:59 ` Li Xiubo
2013-11-06 10:03 ` Mark Brown
2013-11-07 3:01 ` Li Xiubo
2013-11-07 20:38 ` Mark Brown
2013-11-01 7:04 ` [PATCHv2 6/8] ASoC: fsl: add SGTL5000 based audio machine driver Xiubo Li
2013-11-01 10:17 ` Oskar Schirmer
2013-11-05 3:26 ` Li Xiubo
2013-11-01 10:28 ` Nicolin Chen
2013-11-01 12:07 ` Shawn Guo
2013-11-05 6:17 ` Li Xiubo
2013-11-05 3:50 ` Li Xiubo
2013-11-01 18:40 ` Mark Brown
2013-11-04 9:52 ` Li Xiubo
2013-11-20 7:49 ` Li Xiubo
2013-11-01 7:04 ` [PATCHv2 7/8] ARM: dts: Enable SGTL5000 codec based audio driver node for VF610 Xiubo Li
2013-11-01 7:04 ` [PATCHv2 8/8] Documentation: Add device tree bindings for Freescale VF610 sound Xiubo Li
2013-11-01 7:52 ` [PATCHv1 0/8] ALSA: Add SAI driver and enable SGT15000 codec Li Xiubo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383289495-24523-3-git-send-email-Li.Xiubo@freescale.com \
--to=li.xiubo@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).