* [PATCH v3 1/3] ARM: dts: imx27-pdk: Keep the dt nodes sorted
@ 2014-04-13 14:35 Fabio Estevam
2014-04-13 14:35 ` [PATCH v3 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration Fabio Estevam
2014-04-13 14:35 ` [PATCH v3 3/3] ARM: dts: imx27-pdk: Pass the FEC " Fabio Estevam
0 siblings, 2 replies; 3+ messages in thread
From: Fabio Estevam @ 2014-04-13 14:35 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
For better readability keep the dt nodes sorted.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v2:
- None
Changes since v1:
- Newly introduced
arch/arm/boot/dts/imx27-pdk.dts | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 28c83bc..bd95265 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -21,11 +21,12 @@
};
};
-&uart1 {
- fsl,uart-has-rtscts;
+
+&fec {
status = "okay";
};
-&fec {
+&uart1 {
+ fsl,uart-has-rtscts;
status = "okay";
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v3 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration
2014-04-13 14:35 [PATCH v3 1/3] ARM: dts: imx27-pdk: Keep the dt nodes sorted Fabio Estevam
@ 2014-04-13 14:35 ` Fabio Estevam
2014-04-13 14:35 ` [PATCH v3 3/3] ARM: dts: imx27-pdk: Pass the FEC " Fabio Estevam
1 sibling, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2014-04-13 14:35 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
Provide an entry for the UART1 pin muxing.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v2:
- None
Changes since v1:
- Keep the iomuxc node at the bottom
arch/arm/boot/dts/imx27-pdk.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index bd95265..e0f4213 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -28,5 +28,20 @@
&uart1 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
+
+&iomuxc {
+ imx27-pdk {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
+ };
+};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v3 3/3] ARM: dts: imx27-pdk: Pass the FEC pin configuration
2014-04-13 14:35 [PATCH v3 1/3] ARM: dts: imx27-pdk: Keep the dt nodes sorted Fabio Estevam
2014-04-13 14:35 ` [PATCH v3 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration Fabio Estevam
@ 2014-04-13 14:35 ` Fabio Estevam
1 sibling, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2014-04-13 14:35 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
Provide an entry for the FEC pin muxing.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v2:
- Keep iomux node sorted
Changes since v1:
- Keep the iomuxc node at the bottom
arch/arm/boot/dts/imx27-pdk.dts | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index e0f4213..f6e9a72 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -23,6 +23,9 @@
&fec {
+ phy-mode = "mii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
status = "okay";
};
@@ -35,6 +38,29 @@
&iomuxc {
imx27-pdk {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
+ };
pinctrl_uart1: uart1grp {
fsl,pins = <
MX27_PAD_UART1_TXD__UART1_TXD 0x0
@@ -43,5 +69,4 @@
MX27_PAD_UART1_RTS__UART1_RTS 0x0
>;
};
- };
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-04-13 14:35 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-04-13 14:35 [PATCH v3 1/3] ARM: dts: imx27-pdk: Keep the dt nodes sorted Fabio Estevam
2014-04-13 14:35 ` [PATCH v3 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration Fabio Estevam
2014-04-13 14:35 ` [PATCH v3 3/3] ARM: dts: imx27-pdk: Pass the FEC " Fabio Estevam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).