From: thomas.ab@samsung.com (Thomas Abraham)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 3/6] ARM: dts: Exynos: add CPU OPP and regulator supply property
Date: Wed, 30 Jul 2014 13:37:40 +0530 [thread overview]
Message-ID: <1406707663-16656-4-git-send-email-thomas.ab@samsung.com> (raw)
In-Reply-To: <1406707663-16656-1-git-send-email-thomas.ab@samsung.com>
For Exynos 4210/5250/5420 based platforms, add CPU operating points and CPU
regulator supply properties for migrating from Exynos specific cpufreq driver
to using generic cpufreq drivers.
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Andreas Faerber <afaerber@suse.de>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
---
arch/arm/boot/dts/exynos4210-origen.dts | 4 +++
arch/arm/boot/dts/exynos4210-trats.dts | 4 +++
arch/arm/boot/dts/exynos4210-universal_c210.dts | 4 +++
arch/arm/boot/dts/exynos4210.dtsi | 14 ++++++++-
arch/arm/boot/dts/exynos5250-arndale.dts | 4 +++
arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 +++
arch/arm/boot/dts/exynos5250-snow.dts | 4 +++
arch/arm/boot/dts/exynos5250.dtsi | 25 ++++++++++++++-
arch/arm/boot/dts/exynos5420.dtsi | 38 +++++++++++++++++++++++
9 files changed, 99 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index f767c42..887dded 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -334,3 +334,7 @@
};
};
};
+
+&cpu0 {
+ cpu0-supply = <&buck1_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index f516da9..66119dd 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -446,3 +446,7 @@
};
};
};
+
+&cpu0 {
+ cpu0-supply = <&varm_breg>;
+};
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index d50eb3a..bf0a39c 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -492,3 +492,7 @@
&mdma1 {
reg = <0x12840000 0x1000>;
};
+
+&cpu0 {
+ cpu0-supply = <&vdd_arm_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index bcc9e63..69bac07 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -35,10 +35,22 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu at 900 {
+ cpu0: cpu at 900 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x900>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+ clock-latency = <160000>;
+
+ operating-points = <
+ 1200000 1250000
+ 1000000 1150000
+ 800000 1075000
+ 500000 975000
+ 400000 975000
+ 200000 950000
+ >;
};
cpu at 901 {
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index d0de1f5..3b12a97 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -575,3 +575,7 @@
usb-phy = <&usb2_phy>;
};
};
+
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index b4b35ad..f07e834 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -414,3 +414,7 @@
};
};
};
+
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index f2b8c41..91acca7 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -509,4 +509,8 @@
};
};
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 492e1ef..97b282c 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -58,11 +58,34 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu at 0 {
+ cpu0: cpu at 0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1700000000>;
+
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+ clock-latency = <140000>;
+
+ operating-points = <
+ 1700000 1300000
+ 1600000 1250000
+ 1500000 1225000
+ 1400000 1200000
+ 1300000 1150000
+ 1200000 1125000
+ 1100000 1100000
+ 1000000 1075000
+ 900000 1050000
+ 800000 1025000
+ 700000 1012500
+ 600000 1000000
+ 500000 975000
+ 400000 950000
+ 300000 937500
+ 200000 925000
+ >;
};
cpu at 1 {
device_type = "cpu";
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index cb2b70e..3154b4c 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -59,8 +59,26 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu-cluster.0";
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ clock-latency = <140000>;
+
+ operating-points = <
+ 1800000 1250000
+ 1700000 1212500
+ 1600000 1175000
+ 1500000 1137500
+ 1400000 1112500
+ 1300000 1062500
+ 1200000 1037500
+ 1100000 1012500
+ 1000000 987500
+ 900000 962500
+ 800000 937500
+ 700000 912500
+ >;
};
cpu1: cpu at 1 {
@@ -69,6 +87,7 @@
reg = <0x1>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ clock-latency = <140000>;
};
cpu2: cpu at 2 {
@@ -77,6 +96,7 @@
reg = <0x2>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ clock-latency = <140000>;
};
cpu3: cpu at 3 {
@@ -85,14 +105,29 @@
reg = <0x3>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ clock-latency = <140000>;
};
cpu4: cpu at 100 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
+ clocks = <&clock CLK_KFC_CLK>;
+ clock-names = "cpu-cluster.1";
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ clock-latency = <140000>;
+
+ operating-points = <
+ 1300000 1275000
+ 1200000 1212500
+ 1100000 1162500
+ 1000000 1112500
+ 900000 1062500
+ 800000 1025000
+ 700000 975000
+ 600000 937500
+ >;
};
cpu5: cpu at 101 {
@@ -101,6 +136,7 @@
reg = <0x101>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ clock-latency = <140000>;
};
cpu6: cpu at 102 {
@@ -109,6 +145,7 @@
reg = <0x102>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ clock-latency = <140000>;
};
cpu7: cpu at 103 {
@@ -117,6 +154,7 @@
reg = <0x103>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ clock-latency = <140000>;
};
};
--
1.7.9.5
next prev parent reply other threads:[~2014-07-30 8:07 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-30 8:07 [PATCH v9 0/6] cpufreq: use generic cpufreq drivers for exynos platforms Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 1/6] clk: samsung: add infrastructure to register cpu clocks Thomas Abraham
2014-09-01 22:29 ` Mike Turquette
2014-09-02 13:53 ` Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 2/6] clk: samsung: add cpu clock configuration data and instantiate cpu clock Thomas Abraham
2014-09-01 22:29 ` Mike Turquette
2014-07-30 8:07 ` Thomas Abraham [this message]
2014-07-30 11:28 ` [PATCH v9 3/6] ARM: dts: Exynos: add CPU OPP and regulator supply property Andreas Färber
2014-07-31 2:55 ` Thomas Abraham
2014-07-31 0:37 ` Doug Anderson
2014-07-31 3:21 ` Thomas Abraham
2014-07-31 3:53 ` Doug Anderson
2014-07-31 4:06 ` Thomas Abraham
2014-07-31 4:08 ` Doug Anderson
2014-07-31 4:18 ` Thomas Abraham
2014-08-02 3:49 ` Javier Martinez Canillas
2014-08-04 3:00 ` Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 4/6] ARM: Exynos: switch to using generic cpufreq driver for Exynos4210/5250/5420 Thomas Abraham
2014-07-31 18:32 ` Kukjin Kim
2014-07-31 18:40 ` Tomasz Figa
2014-07-31 18:54 ` Tomasz Figa
2014-07-31 19:25 ` Thomas Abraham
2014-07-31 19:30 ` Tomasz Figa
2014-08-04 3:24 ` Thomas Abraham
2014-08-22 23:54 ` Kevin Hilman
2014-08-23 0:02 ` Tomasz Figa
2014-08-25 6:53 ` Lukasz Majewski
2014-08-25 12:15 ` Chander Kashyap
2014-08-25 15:32 ` Kevin Hilman
2014-08-25 15:56 ` Tomasz Figa
2014-08-26 4:54 ` Viresh Kumar
2014-08-26 5:25 ` Chander Kashyap
2014-08-26 15:15 ` Kevin Hilman
2014-08-26 22:25 ` Kevin Hilman
2014-08-29 12:52 ` Thomas Abraham
2014-08-29 15:03 ` Kevin Hilman
2014-09-01 8:47 ` Thomas Abraham
2014-09-02 19:32 ` Kevin Hilman
2014-09-03 4:26 ` Thomas Abraham
2014-09-03 13:18 ` Thomas Abraham
2014-09-03 23:15 ` Kevin Hilman
2014-09-04 10:22 ` Thomas Abraham
2014-09-04 13:30 ` Kevin Hilman
2014-09-05 13:41 ` Thomas Abraham
2014-08-25 8:11 ` Sjoerd Simons
2014-07-30 8:07 ` [PATCH v9 5/6] cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 6/6] clk: samsung: remove unused clock aliases and update clock flags Thomas Abraham
2014-07-31 14:13 ` Tomasz Figa
2014-07-31 18:24 ` Thomas Abraham
2014-07-31 18:35 ` Tomasz Figa
2014-07-31 18:41 ` Thomas Abraham
2014-07-31 18:46 ` Tomasz Figa
2014-07-31 18:49 ` Thomas Abraham
2014-09-01 22:31 ` Mike Turquette
2014-07-31 6:20 ` [PATCH v9 0/6] cpufreq: use generic cpufreq drivers for exynos platforms Chander M. Kashyap
2014-07-31 10:59 ` Thomas Abraham
2014-07-31 12:24 ` Chander M. Kashyap
2014-07-31 14:15 ` Tomasz Figa
2014-07-31 18:25 ` Thomas Abraham
2014-07-31 18:34 ` Thomas Abraham
2014-08-01 9:42 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406707663-16656-4-git-send-email-thomas.ab@samsung.com \
--to=thomas.ab@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).