From: chander.kashyap@gmail.com (Chander M. Kashyap)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 0/6] cpufreq: use generic cpufreq drivers for exynos platforms
Date: Thu, 31 Jul 2014 11:50:45 +0530 [thread overview]
Message-ID: <CADWw7OiwXNrbFyiVhpcJyBnAdsGsXcAMgMUOmY=JxHM7+7Z0eA@mail.gmail.com> (raw)
In-Reply-To: <1406707663-16656-1-git-send-email-thomas.ab@samsung.com>
On Wed, Jul 30, 2014 at 1:37 PM, Thomas Abraham <thomas.ab@samsung.com> wrote:
> Changes since v8:
> - Fixes suggested by Tomasz Figa.
>
> This patch series removes the use of Exynos4210 and Exynos5250 specific cpufreq
> drivers and enables the use of cpufreq-cpu0 driver for these platforms. This
> series also enables cpufreq support for Exynos5420 using arm_big_little cpufreq
> driver.
>
> This patch series is dependent on two other patches
> 1. ARM: dts: add CPU nodes for Exynos4 SoCs
> - https://lkml.org/lkml/2014/7/21/315
> 2. ARM: dts: smdk5250: Specify MAX77686 pmic interrupt
> - http://www.spinics.net/lists/arm-kernel/msg351134.html
> 3. clk: exynos4: remove duplicate div_core2 divider clock instantiation
> - http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg34859.html
>
> Thomas Abraham (6):
> clk: samsung: add infrastructure to register cpu clocks
> clk: samsung: add cpu clock configuration data and instantiate cpu clock
> ARM: dts: Exynos: add CPU OPP and regulator supply property
> ARM: Exynos: switch to using generic cpufreq driver for Exynos4210/5250/5420
> cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support
> clk: samsung: remove unused clock aliases and update clock flags
>
> arch/arm/boot/dts/exynos4210-origen.dts | 4 +
> arch/arm/boot/dts/exynos4210-trats.dts | 4 +
> arch/arm/boot/dts/exynos4210-universal_c210.dts | 4 +
> arch/arm/boot/dts/exynos4210.dtsi | 14 +-
> arch/arm/boot/dts/exynos5250-arndale.dts | 4 +
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 +
> arch/arm/boot/dts/exynos5250-snow.dts | 4 +
> arch/arm/boot/dts/exynos5250.dtsi | 25 +-
> arch/arm/boot/dts/exynos5420.dtsi | 38 +++
> arch/arm/mach-exynos/exynos.c | 24 +-
> drivers/clk/samsung/Makefile | 2 +-
> drivers/clk/samsung/clk-cpu.c | 335 +++++++++++++++++++++++
> drivers/clk/samsung/clk-cpu.h | 91 ++++++
> drivers/clk/samsung/clk-exynos4.c | 63 +++--
> drivers/clk/samsung/clk-exynos5250.c | 44 ++-
> drivers/clk/samsung/clk-exynos5420.c | 72 ++++-
> drivers/cpufreq/Kconfig.arm | 22 --
> drivers/cpufreq/Makefile | 2 -
> drivers/cpufreq/exynos4210-cpufreq.c | 184 -------------
> drivers/cpufreq/exynos5250-cpufreq.c | 210 --------------
> include/dt-bindings/clock/exynos5250.h | 1 +
> include/dt-bindings/clock/exynos5420.h | 2 +
> 22 files changed, 690 insertions(+), 463 deletions(-)
> create mode 100644 drivers/clk/samsung/clk-cpu.c
> create mode 100644 drivers/clk/samsung/clk-cpu.h
> delete mode 100644 drivers/cpufreq/exynos4210-cpufreq.c
> delete mode 100644 drivers/cpufreq/exynos5250-cpufreq.c
>
> --
> 1.7.9.5
Working great.
tested on smdk5420, and arndale-5250
>
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
thanks and regards,
Chander M. Kashyap
Contact Number: +918123738320
------- TENSION LENE KA NAHI, DENE KE-----
next prev parent reply other threads:[~2014-07-31 6:20 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-30 8:07 [PATCH v9 0/6] cpufreq: use generic cpufreq drivers for exynos platforms Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 1/6] clk: samsung: add infrastructure to register cpu clocks Thomas Abraham
2014-09-01 22:29 ` Mike Turquette
2014-09-02 13:53 ` Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 2/6] clk: samsung: add cpu clock configuration data and instantiate cpu clock Thomas Abraham
2014-09-01 22:29 ` Mike Turquette
2014-07-30 8:07 ` [PATCH v9 3/6] ARM: dts: Exynos: add CPU OPP and regulator supply property Thomas Abraham
2014-07-30 11:28 ` Andreas Färber
2014-07-31 2:55 ` Thomas Abraham
2014-07-31 0:37 ` Doug Anderson
2014-07-31 3:21 ` Thomas Abraham
2014-07-31 3:53 ` Doug Anderson
2014-07-31 4:06 ` Thomas Abraham
2014-07-31 4:08 ` Doug Anderson
2014-07-31 4:18 ` Thomas Abraham
2014-08-02 3:49 ` Javier Martinez Canillas
2014-08-04 3:00 ` Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 4/6] ARM: Exynos: switch to using generic cpufreq driver for Exynos4210/5250/5420 Thomas Abraham
2014-07-31 18:32 ` Kukjin Kim
2014-07-31 18:40 ` Tomasz Figa
2014-07-31 18:54 ` Tomasz Figa
2014-07-31 19:25 ` Thomas Abraham
2014-07-31 19:30 ` Tomasz Figa
2014-08-04 3:24 ` Thomas Abraham
2014-08-22 23:54 ` Kevin Hilman
2014-08-23 0:02 ` Tomasz Figa
2014-08-25 6:53 ` Lukasz Majewski
2014-08-25 12:15 ` Chander Kashyap
2014-08-25 15:32 ` Kevin Hilman
2014-08-25 15:56 ` Tomasz Figa
2014-08-26 4:54 ` Viresh Kumar
2014-08-26 5:25 ` Chander Kashyap
2014-08-26 15:15 ` Kevin Hilman
2014-08-26 22:25 ` Kevin Hilman
2014-08-29 12:52 ` Thomas Abraham
2014-08-29 15:03 ` Kevin Hilman
2014-09-01 8:47 ` Thomas Abraham
2014-09-02 19:32 ` Kevin Hilman
2014-09-03 4:26 ` Thomas Abraham
2014-09-03 13:18 ` Thomas Abraham
2014-09-03 23:15 ` Kevin Hilman
2014-09-04 10:22 ` Thomas Abraham
2014-09-04 13:30 ` Kevin Hilman
2014-09-05 13:41 ` Thomas Abraham
2014-08-25 8:11 ` Sjoerd Simons
2014-07-30 8:07 ` [PATCH v9 5/6] cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support Thomas Abraham
2014-07-30 8:07 ` [PATCH v9 6/6] clk: samsung: remove unused clock aliases and update clock flags Thomas Abraham
2014-07-31 14:13 ` Tomasz Figa
2014-07-31 18:24 ` Thomas Abraham
2014-07-31 18:35 ` Tomasz Figa
2014-07-31 18:41 ` Thomas Abraham
2014-07-31 18:46 ` Tomasz Figa
2014-07-31 18:49 ` Thomas Abraham
2014-09-01 22:31 ` Mike Turquette
2014-07-31 6:20 ` Chander M. Kashyap [this message]
2014-07-31 10:59 ` [PATCH v9 0/6] cpufreq: use generic cpufreq drivers for exynos platforms Thomas Abraham
2014-07-31 12:24 ` Chander M. Kashyap
2014-07-31 14:15 ` Tomasz Figa
2014-07-31 18:25 ` Thomas Abraham
2014-07-31 18:34 ` Thomas Abraham
2014-08-01 9:42 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CADWw7OiwXNrbFyiVhpcJyBnAdsGsXcAMgMUOmY=JxHM7+7Z0eA@mail.gmail.com' \
--to=chander.kashyap@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).