From: bigeasy@linutronix.de (Sebastian Andrzej Siewior)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 16/18] arm: dts: am33xx: add DMA properties for UART
Date: Fri, 5 Sep 2014 21:02:51 +0200 [thread overview]
Message-ID: <1409943773-7874-17-git-send-email-bigeasy@linutronix.de> (raw)
In-Reply-To: <1409943773-7874-1-git-send-email-bigeasy@linutronix.de>
Cc: devicetree at vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
arch/arm/boot/dts/am33xx.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 3a0a161342ba..078a760a4a21 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -200,6 +200,8 @@
reg = <0x44e09000 0x2000>;
interrupts = <72>;
status = "disabled";
+ dmas = <&edma 26>, <&edma 27>;
+ dma-names = "tx", "rx";
};
uart1: serial at 48022000 {
@@ -209,6 +211,8 @@
reg = <0x48022000 0x2000>;
interrupts = <73>;
status = "disabled";
+ dmas = <&edma 28>, <&edma 29>;
+ dma-names = "tx", "rx";
};
uart2: serial at 48024000 {
@@ -218,6 +222,8 @@
reg = <0x48024000 0x2000>;
interrupts = <74>;
status = "disabled";
+ dmas = <&edma 30>, <&edma 31>;
+ dma-names = "tx", "rx";
};
uart3: serial at 481a6000 {
--
2.1.0
next prev parent reply other threads:[~2014-09-05 19:02 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-05 19:02 [PATCH v8 00/18] 8250-core based serial driver for OMAP + DMA Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 01/18] tty: serial: 8250_core: provide a function to export uart_8250_port Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 02/18] tty: serial: 8250_core: allow to overwrite & export serial8250_startup() Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 03/18] tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks Sebastian Andrzej Siewior
2014-09-08 23:33 ` Greg Kroah-Hartman
2014-09-09 0:41 ` Tony Lindgren
2014-09-05 19:02 ` [PATCH 04/18] tty: serial: 8250_core: add run time pm Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 05/18] tty: serial: 8250_core: read only RX if there is something in the FIFO Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 06/18] tty: serial: 8250_core: user the ->line argument as a hint in serial8250_find_match_or_unused() Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 07/18] tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 08/18] tty: serial: Add 8250-core based omap driver Sebastian Andrzej Siewior
2014-09-08 16:39 ` Tony Lindgren
2014-09-05 19:02 ` [PATCH 09/18] tty: serial: 8250_dma: handle error on TX submit Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 10/18] tty: serial: 8250_dma: enqueue RX dma again on completion Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 11/18] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx Sebastian Andrzej Siewior
2014-09-08 16:41 ` Tony Lindgren
2014-09-08 16:45 ` Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 12/18] tty: serial: 8250_dma: optimize the xmit path due to UART_BUG_DMA_TX Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 13/18] tty: serial: 8250_dma: keep own book keeping about RX transfers Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 14/18] tty: serial: 8250_dma: handle the when UART response while DMA remains idle Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 15/18] tty: serial: 8250_dma: add pm runtime Sebastian Andrzej Siewior
2014-09-05 19:02 ` Sebastian Andrzej Siewior [this message]
2014-09-05 19:02 ` [PATCH 17/18] arm: dts: dra7: add DMA properties for UART Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 18/18] tty: serial: 8250: omap: add dma support Sebastian Andrzej Siewior
2014-09-08 14:46 ` [PATCH v8 00/18] 8250-core based serial driver for OMAP + DMA Frans Klaver
2014-09-08 15:15 ` Sebastian Andrzej Siewior
2014-09-08 16:33 ` Sebastian Andrzej Siewior
2014-09-08 18:25 ` Frans Klaver
2014-09-08 18:33 ` Frans Klaver
2014-09-09 19:41 ` Sebastian Andrzej Siewior
2014-09-10 14:15 ` Frans Klaver
2014-09-10 16:56 ` Sebastian Andrzej Siewior
2014-09-08 17:40 ` Tony Lindgren
2014-09-08 17:55 ` Tony Lindgren
2014-09-09 7:33 ` Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409943773-7874-17-git-send-email-bigeasy@linutronix.de \
--to=bigeasy@linutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).