linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: atull@opensource.altera.com (atull at opensource.altera.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi
Date: Wed, 1 Oct 2014 14:38:23 -0500	[thread overview]
Message-ID: <1412192304-1209-2-git-send-email-atull@opensource.altera.com> (raw)
In-Reply-To: <1412192304-1209-1-git-send-email-atull@opensource.altera.com>

From: Alan Tull <atull@opensource.altera.com>

Use WFI when putting CPU1 to sleep.  Don't hold CPU1 in reset
since that results in increased power consumption.

Reset CPU1 briefly during CPU1 bootup.

This has been tested for hotplug and suspend/resume and results
in no increased power consumption.

Signed-off-by: Alan Tull <atull@opensource.altera.com>

v2: no need to flush the caches
    clean up spacing in comments
    replace a register offset with a macro
---
 arch/arm/mach-socfpga/core.h    |    3 +++
 arch/arm/mach-socfpga/platsmp.c |   16 ++++++++++------
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index 572b8f7..953a9c0 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -21,6 +21,7 @@
 #define __MACH_CORE_H
 
 #define SOCFPGA_RSTMGR_CTRL	0x04
+#define SOCFPGA_RSTMGR_MODMPURST	0x10
 #define SOCFPGA_RSTMGR_MODPERRST	0x14
 #define SOCFPGA_RSTMGR_BRGMODRST	0x1c
 
@@ -28,6 +29,8 @@
 #define RSTMGR_CTRL_SWCOLDRSTREQ	0x1	/* Cold Reset */
 #define RSTMGR_CTRL_SWWARMRSTREQ	0x2	/* Warm Reset */
 
+#define RSTMGR_MPUMODRST_CPU1		0x2     /* CPU1 Reset */
+
 extern void socfpga_secondary_startup(void);
 extern void __iomem *socfpga_scu_base_addr;
 
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
index 5356a72..97907dd 100644
--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -34,6 +34,10 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
 
 	if (cpu1start_addr) {
+		/* This will put CPU #1 into reset. */
+		__raw_writel(RSTMGR_MPUMODRST_CPU1,
+			     rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
+
 		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
 
 		__raw_writel(virt_to_phys(socfpga_secondary_startup),
@@ -43,8 +47,9 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		smp_wmb();
 		outer_clean_range(0, trampoline_size);
 
-		/* This will release CPU #1 out of reset.*/
-		__raw_writel(0, rst_manager_base_addr + 0x10);
+		/* This will release CPU #1 out of reset. */
+		__raw_writel(0,
+			     rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
 	}
 
 	return 0;
@@ -86,10 +91,9 @@ static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
  */
 static void socfpga_cpu_die(unsigned int cpu)
 {
-	cpu_do_idle();
-
-	/* We should have never returned from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+	/* Do WFI. If we wake up early, go back into WFI */
+	while (1)
+		cpu_do_idle();
 }
 
 struct smp_operations socfpga_smp_ops __initdata = {
-- 
1.7.9.5

  reply	other threads:[~2014-10-01 19:38 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-01 19:38 [PATCH v2 0/2] socfpga: fix hotplug/add suspend to ram atull at opensource.altera.com
2014-10-01 19:38 ` atull at opensource.altera.com [this message]
2014-10-07 11:10   ` [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi Pavel Machek
2014-10-07 14:19     ` atull
2014-10-01 19:38 ` [PATCH v2 2/2] socfpga: support suspend to ram atull at opensource.altera.com
2014-10-02 21:16   ` atull
2014-10-07 11:17   ` Pavel Machek
2014-10-07 14:17     ` atull

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1412192304-1209-2-git-send-email-atull@opensource.altera.com \
    --to=atull@opensource.altera.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).